Due to dense deployments of Internet of things (IoT) networks, interference management becomes a critical challenge. With the proliferation of aerial IoT devices, such as unmanned aerial vehicles (UAVs), interference characteristics in 3D environments will be different than those in the existing terrestrial IoT networks. In this paper, we consider 3D topology IoT networks with a mixture of aerial and terrestrial links, with low-cost cross-dipole antennas at ground nodes and omni-directional antennas at aerial nodes. Considering a massive-access communication scenario, we first derive the statistics of the channel gain at IoT receivers in closed form while taking into account the radiation patterns of both ground and aerial nodes. These are then used to calculate the ergodic achievable rate as a function of the height of the aerial receiver. We propose an interference mitigation scheme that utilizes 3D antenna radiation pattern with different dipole antenna settings. Our results show that using the proposed scheme, the ergodic achievable rate improves as the height of aerial receivers increases. In addition, the ratio between the ground and aerial receivers that maximizes the peak rate also increases with the aerial IoT receiver height.
Internet of things (IoT) is one of main paradigms for 5G wireless systems. Due to high connection density, interference from other sources is a key problem in IoT networks. Especially, it is more difficult to find a solution to manage interference in uncoordinated networks than coordinated system. In this work, we consider 3D topology of uncoordinated IoT network and propose interference mitigation scheme with respect to 3D antenna radiation pattern. In 2D topology network, the radiation pattern of dipole antenna can be assumed as onmi-directional. We show the variance of antenna gain on dipol…
In this paper, a novel method for joint radio resource allocation (RRA), three-dimensional placement (3DP), and user association of aerial base stations (ABSs) as a main problem in the internet of things (IoT) networks is proposed. In our proposed model, we consider two schemes: a) line of sight (LoS) b) generalized. In the LoS scheme, all the ABSs should see the IoT users as LoS. In the generalized scheme, ABSs can see some of the IoT users as LoS and some of them as NLoS. The main goal of this paper is to minimize the overal transmit power of the IoT users while satisfying some quality of se…
This article investigates a non-orthogonal multiple access (NOMA) enhanced Internet of Things (IoT) network. In order to provide connectivity, a novel cluster strategy is proposed, where multiple devices can be served simultaneously. Two potential scenarios are investigated: 1) NOMA enhanced terrestrial IoT networks and 2) NOMA enhanced aerial IoT networks. We utilize stochastic geometry tools to model the spatial randomness of both terrestrial and aerial devices. New channel statistics are derived for both terrestrial and aerial devices. The exact and the asymptotic expressions in terms of co…
The Internet of Things (IoT) has started to empower the future of many industrial and mass-market applications. Localization techniques are becoming key to add location context to IoT data without human perception and intervention. Meanwhile, the newly-emerged Low-Power Wide-Area Network (LPWAN) technologies have advantages such as long-range, low power consumption, low cost, massive connections, and the capability for communication in both indoor and outdoor areas. These features make LPWAN signals strong candidates for mass-market localization applications. However, there are various error s…
With the explosive increment of computation requirements, the multi-access edge computing (MEC) paradigm appears as an effective mechanism. Besides, as for the Internet of Things (IoT) in disasters or remote areas requiring MEC services, unmanned aerial vehicles (UAVs) and high altitude platforms (HAPs) are available to provide aerial computing services for these IoT devices. In this paper, we develop the hierarchical aerial computing framework composed of HAPs and UAVs, to provide MEC services for various IoT applications. In particular, the problem is formulated to maximize the total IoT dat…
The Internet of Things (IoT) will soon be omnipresent and billions of sensors and actuators will support our industries and well-being. IoT devices are embedded systems that are connected using wireless technology for most of the cases. The availability of the wireless network serving the IoT, the privacy, integrity, and trustworthiness of the data are of critical importance, since IoT will drive businesses and personal decisions. This paper proposes a new approach in the wireless security domain that leverages advanced wireless technology and the emergence of the unmanned aerial system or veh…
This paper describes the principles and implementation results of reinforcement learning algorithms on IoT devices for radio collision mitigation in ISM unlicensed bands. Learning is here used to improve both the IoT network capability to support a larger number of objects as well as the autonomy of IoT devices. We first illustrate the efficiency of the proposed approach in a proof-of-concept based on USRP software radio platforms operating on real radio signals. It shows how collisions with other RF signals present in the ISM band are diminished for a given IoT device. Then we describe the fi…
This article introduces a new mobile-based application of modern information and communication technology in agriculture based on Internet of Things (IoT), embedded systems and an unmanned aerial vehicle (UAV). The proposed agricultural monitoring system was designed and implemented using Arduino microcontroller boards, Wi-Fi modules, water pumps and electronic environmental sensors, namely temperature, humidity and soil moisture. The role of UAV in this study is to collect these environmental data from different regions of the farm. Then, the quantity of water irrigation is automatically comp…
This paper proposes an intelligent technique for maximizing the network connectivity and provisioning desired quality of service (QoS) of integration of internet of things (IoT) and unmanned aerial vehicle (UAV). Prediction of the signal strength and fading channel conditions enable adaptive data transmission which turn enhances the QoS for the end users/ devices with reducing the power consumption for data transmissions. UAV is data gathering robot from the difficult or impossible area for humans to reach. Hence, Atmospheric dynamics and environment influence the signal strength during travel…
Unmanned Aerial Vehicles (UAVs) present a promising advanced technology that can enhance people life quality and smartness of cities dramatically and increase overall economic efficiency. UAVs have attained a significant interest in supporting many applications such as surveillance, agriculture, communication, transportation, pollution monitoring, disaster management, public safety, healthcare, and environmental preservation. Industry 4.0 applications are conceived of intelligent things that can automatically and collaboratively improve beyond 5G (B5G). Therefore, the Internet of Things (IoT) …
The Internet of Things (IoT) is penetrating many facets of our daily life with the proliferation of intelligent services and applications empowered by artificial intelligence (AI). Traditionally, AI techniques require centralized data collection and processing that may not be feasible in realistic application scenarios due to the high scalability of modern IoT networks and growing data privacy concerns. Federated Learning (FL) has emerged as a distributed collaborative AI approach that can enable many intelligent IoT applications, by allowing for AI training at distributed IoT devices without …
Grant-free non-coherent index-modulation (NC-IM) has been recently considered as an efficient massive access scheme for enabling cost- and energy-limited Internet-of-Things (IoT) devices that transmit small data packets. This paper investigates the grant-free NC-IM scheme combined with orthogonal frequency division multiplexing for applicant to unmanned aerial vehicle (UAV)-based massive IoT access. Specifically, each device is assigned a unique non-orthogonal signature sequence codebook. Each active device transmits one of its signature sequences in the given time-frequency resources, by modu…
Due to the sustainable power supply and environment-friendly features, self-powered IoT devices have been increasingly employed in various fields such as providing observation data in remote areas, especially in rural areas or post-disaster scenarios. Generally, through multi-hop relay, the sensed data of those self-powered IoT devices are collected by the sink node which connects to the IoT backbones. However, due to the remoteness, the sink needs to be located at the border of the monitoring area where both the backbone of IoT and electrical infrastructures are accessible. Under such deploym…
George Mason University（乔治梅森大学）；Virginia Tech（弗吉尼亚理工学院暨州立大学）
Due to flexibility, autonomy and low operational cost, unmanned aerial vehicles (UAVs), as fixed aerial base stations, are increasingly being used as \textit{relays} to collect time-sensitive information (i.e., status updates) from IoT devices and deliver it to the nearby terrestrial base station (TBS), where the information gets processed. In order to ensure timely delivery of information to the TBS (from all IoT devices), optimal scheduling of time-sensitive information over two hop UAV-relayed IoT networks (i.e., IoT device to the UAV [hop 1], and UAV to the TBS [hop 2]) becomes a critical …
The sixth generation (6G) wireless communication networks are envisioned to revolutionize customer services and applications via the Internet of Things (IoT) towards a future of fully intelligent and autonomous systems. In this article, we explore the emerging opportunities brought by 6G technologies in IoT networks and applications, by conducting a holistic survey on the convergence of 6G and IoT. We first shed light on some of the most fundamental 6G technologies that are expected to empower future IoT networks, including edge intelligence, reconfigurable intelligent surfaces, space-air-grou…
This article investigates the energy efficiency issue in non-orthogonal multiple access (NOMA)-enhanced Internet-of-Things (IoT) networks, where a mobile unmanned aerial vehicle (UAV) is exploited as a flying base station to collect data from ground devices via the NOMA protocol. With the aim of maximizing network energy efficiency, we formulate a joint problem of UAV deployment, device scheduling and resource allocation. First, we formulate the joint device scheduling and spectrum allocation problem as a three-sided matching problem, and propose a novel low-complexity near-optimal algorithm. …
The recent advances in information and communication technology (ICT) have further extended Internet of Things (IoT) from the sole "things" aspect to the omnipotent role of "intelligent connection of things". Meanwhile, the concept of internet of everything (IoE) is presented as such an omnipotent extension of IoT. However, the IoE realization meets critical challenges including the restricted network coverage and the limited resource of existing network technologies. Recently, Unmanned Aerial Vehicles (UAVs) have attracted significant attentions attributed to their high mobility, low cost, an…
The world is undergoing a profound transformation with the advent of intelligent information era. 6G networks envisioned being the game changer in next generation wireless communication systems that will address the challenges of limited information speed escalated with the augmentation of billions of data applications encountered by the current fifth generation (5G) networks. Some key radical technologies in 6G together with existing 5G candidate schemes will guarantee the expected quality of experience (QoE) to attain ubiquitous wireless connectivity for the Internet of Everything (IoE) rang…
Unmanned aerial vehicle (UAV) communication has emerged as a prominent technology for emergency communications (e.g., natural disaster) in the Internet of Things (IoT) networks to enhance the ability of disaster prediction, damage assessment, and rescue operations promptly. A UAV can be deployed as a flying base station (BS) to collect data from time-constrained IoT devices and then transfer it to a ground gateway (GW). In general, the latency constraint at IoT devices and UAV's limited storage capacity highly hinder practical applications of UAV-assisted IoT networks. In this paper, {full-dup…
We consider multiple unmanned aerial vehicles (UAVs) at a common altitude serving as data collectors to a network of IoT devices. First, using a probabilistic line of sight channel model, the optimal assignment of IoT devices to the UAVs is determined. Next, for the asymptotic regimes of a large number of UAVs and/or large UAV altitudes, we propose closed-form analytical expressions for the optimal data rate and characterize the corresponding optimal UAV deployments. We also propose a simple iterative algorithm to find the optimal deployments with a small number of UAVs at high altitudes. Glob…
The challenge of wildfire management and detection is recently gaining increased attention due to the increased severity and frequency of wildfires worldwide. Popular fire detection techniques such as satellite imaging and remote camera-based sensing suffer from late detection and low reliability while early wildfire detection is a key to prevent massive fires. In this paper, we propose a novel wildfire detection solution based on unmanned aerial vehicles assisted Internet of things (UAV-IoT) networks. The main objective is to (1) study the performance and reliability of the UAV-IoT networks f…
University of Waterloo（滑铁卢大学）；Zhejiang University（浙江大学）；Huazhong University of Science and Technology（华中科技大学）；Central South University（中南大学）；Xidian University（西安电子科技大学）
In this paper, we investigate a computing task scheduling problem in space-air-ground integrated network (SAGIN) for delay-oriented Internet of Things (IoT) services. In the considered scenario, an unmanned aerial vehicle (UAV) collects computing tasks from IoT devices and then makes online offloading decisions, in which the tasks can be processed at the UAV or offloaded to the nearby base station or the remote satellite. Our objective is to design a task scheduling policy that minimizes offloading and computing delay of all tasks given the UAV energy capacity constraint. To this end, we first…
6G is envisioned to connect everything and yet to be a hundred times more energy efficient than the 5G. Thanks for its ability to use sources of ambient energy, energy harvesting (EH) is promising in alleviating the challenge of meeting such conflicting demands. Moreover, when it comes to the Internet of things (IoT), one of the foundations for enabling connecting everything, the need for EH may become inevitable. IoT involves connecting not only devices that are large in number, but also hard to reach. The good news, nevertheless, is that the unmanned aerial vehicle (UAV), owning to its flexi…
Queen’s University Belfast（贝尔法斯特女王大学）；HoChiMinh City University of Technology and Education（胡志明市工业与教育大学）；Princeton University（普林斯顿大学）
Many of the devices used in Internet-of-Things (IoT) applications are energy-limited, and thus supplying energy while maintaining seamless connectivity for IoT devices is of considerable importance. In this context, we propose a simultaneous wireless power transfer and information transmission scheme for IoT devices with support from reconfigurable intelligent surface (RIS)-aided unmanned aerial vehicle (UAV) communications. In particular, in a first phase, IoT devices harvest energy from the UAV through wireless power transfer; and then in a second phase, the UAV collects data from the IoT de…
This paper investigates a full-duplex orthogonal-frequency-division multiple access (OFDMA) based multiple unmanned aerial vehicles (UAVs)-enabled wireless-powered Internet-of-Things (IoT) networks. In this paper, a swarm of UAVs is first deployed in three dimensions (3D) to simultaneously charge all devices, i.e., a downlink (DL) charging period, and then flies to new locations within this area to collect information from scheduled devices in several epochs via OFDMA due to potential limited number of channels available in Narrow Band IoT, i.e., an uplink (UL) communication period. To maximiz…
Illinois Institute of Technology（伊利诺伊理工学院）；Argonne National Laboratory（阿贡国家实验室）
In this paper, we apply the Non-Orthogonal Multiple Access (NOMA) technique to improve the massive channel access of a wireless IoT network where solar-powered Unmanned Aerial Vehicles (UAVs) relay data from IoT devices to remote servers. Specifically, IoT devices contend for accessing the shared wireless channel using an adaptive $p$-persistent slotted Aloha protocol; and the solar-powered UAVs adopt Successive Interference Cancellation (SIC) to decode multiple received data from IoT devices to improve access efficiency. To enable an energy-sustainable capacity-optimal network, we study the j…
With the advent of the Internet-of-Things (IoT) era, the ever-increasing number of devices and emerging applications have triggered the need for ubiquitous connectivity and more efficient computing paradigms. These stringent demands have posed significant challenges to the current wireless networks and their computing architectures. In this article, we propose a high-altitude platform (HAP) network-enabled edge computing paradigm to tackle the key issues of massive IoT connectivity. Specifically, we first provide a comprehensive overview of the recent advances in non-terrestrial network-based …
