Despite the promising results of convolutional neural networks (CNNs), their application on devices with limited resources is still a big challenge; this is mainly due to the huge memory and computation requirements of the CNN. To counter the limitation imposed by the network size, we use pruning to reduce the network size and -- implicitly -- the number of floating point operations (FLOPs). Contrary to the filter norm method -- used in ``conventional`` network pruning -- based on the assumption that a smaller norm implies ``less importance'' to its associated component, we develop a novel filter importance norm that is based on the change in the empirical loss caused by the presence or removal of a component from the network architecture.
Since there are too many individual possibilities for filter configuration, we repeatedly sample from these architectural components and measure the system performance in the respective state of components being active or disabled. The result is a collection of filter ensembles -- filter masks -- and associated performance values. We rank the filters based on a linear and additive model and remove the least important ones such that the drop in network accuracy is minimal. We evaluate our method on a fully connected network, as well as on the ResNet architecture trained on the CIFAR-10 dataset. Using our pruning method, we managed to remove $60\%$ of the parameters and $64\%$ of the FLOPs from the ResNet with an accuracy drop of less than $0.6\%$.
Beijing National Research Center for Information Science and Technology (BNRist)（北京信息科学与技术国家研究中心（BNRist））；Tsinghua University（清华大学）；University of Warwick（华威大学）；Hangzhou Dianzi University（杭州电子科技大学）
It is not easy to design and run Convolutional Neural Networks (CNNs) due to: 1) finding the optimal number of filters (i.e., the width) at each layer is tricky, given an architecture; and 2) the computational intensity of CNNs impedes the deployment on computationally limited devices. Oracle Pruning is designed to remove the unimportant filters from a well-trained CNN, which estimates the filters' importance by ablating them in turn and evaluating the model, thus delivers high accuracy but suffers from intolerable time complexity, and requires a given resulting width but cannot automatically …
Sparsification is an efficient approach to accelerate CNN inference, but it is challenging to take advantage of sparsity in training procedure because the involved gradients are dynamically changed. Actually, an important observation shows that most of the activation gradients in back-propagation are very close to zero and only have a tiny impact on weight-updating. Hence, we consider pruning these very small gradients randomly to accelerate CNN training according to the statistical distribution of activation gradients. Meanwhile, we theoretically analyze the impact of pruning algorithm on the…
The sophisticated structure of Convolutional Neural Network (CNN) allows for outstanding performance, but at the cost of intensive computation. As significant redundancies inevitably present in such a structure, many works have been proposed to prune the convolutional filters for computation cost reduction. Although extremely effective, most works are based only on quantitative characteristics of the convolutional filters, and highly overlook the qualitative interpretation of individual filter's specific functionality. In this work, we interpreted the functionality and redundancy of the convol…
Robert Bosch GmbH（罗伯特·博世有限公司）；University of Lübeck（吕贝克大学）
Unstructured pruning is well suited to reduce the memory footprint of convolutional neural networks (CNNs), both at training and inference time. CNNs contain parameters arranged in $K \times K$ filters. Standard unstructured pruning (SP) reduces the memory footprint of CNNs by setting filter elements to zero, thereby specifying a fixed subspace that constrains the filter. Especially if pruning is applied before or during training, this induces a strong bias. To overcome this, we introduce interspace pruning (IP), a general tool to improve existing pruning methods. It uses filters represented i…
Convolutional neural networks (CNNs) have succeeded in many practical applications. However, their high computation and storage requirements often make them difficult to deploy on resource-constrained devices. In order to tackle this issue, many pruning algorithms have been proposed for CNNs, but most of them can't prune CNNs to a reasonable level. In this paper, we propose a novel algorithm for training and pruning CNNs based on the recursive least squares (RLS) optimization. After training a CNN for some epochs, our algorithm combines inverse input autocorrelation matrices and weight matrice…
In recent years, most of the deep learning solutions are targeted to be deployed in mobile devices. This makes the need for development of lightweight models all the more imminent. Another solution is to optimize and prune regular deep learning models. In this paper, we tackle the problem of CNN model pruning with the help of Self-Similarity Matrix (SSM) computed from the 2D CNN filters. We propose two novel algorithms to rank and prune redundant filters which contribute similar activation maps to the output. One of the key features of our method is that there is no need of finetuning after tr…
Pruning is a popular technique for reducing the model size and computational cost of convolutional neural networks (CNNs). However, a slow retraining or fine-tuning procedure is often required to recover the accuracy loss caused by pruning. Recently, a new research direction on weight pruning, pruning-at-initialization (PAI), is proposed to directly prune CNNs before training so that fine-tuning or retraining can be avoided. While PAI has shown promising results in reducing the model size, existing approaches rely on fine-grained weight pruning which requires unstructured sparse matrix computa…
Beijing National Research Center for Information Science and Technology (BNRist)（北京信息科学与技术国家研究中心（BNRist））；School of Software, Tsinghua University（清华大学软件学院）；Kwai Inc.（快手公司）；Aberystwyth University（阿伯里斯特威斯大学）
We propose ResRep, a novel method for lossless channel pruning (a.k.a. filter pruning), which slims down a CNN by reducing the width (number of output channels) of convolutional layers. Inspired by the neurobiology research about the independence of remembering and forgetting, we propose to re-parameterize a CNN into the remembering parts and forgetting parts, where the former learn to maintain the performance and the latter learn to prune. Via training with regular SGD on the former but a novel update rule with penalty gradients on the latter, we realize structured sparsity. Then we equivalen…
Australian National University（澳大利亚国立大学）；Australian Centre for Robotic Vision（澳大利亚机器人视觉中心）；Data61, CSIRO（澳大利亚联邦科学与工业研究组织Data61）；Microsoft Research（微软研究院）
Although 3D Convolutional Neural Networks (CNNs) are essential for most learning based applications involving dense 3D data, their applicability is limited due to excessive memory and computational requirements. Compressing such networks by pruning therefore becomes highly desirable. However, pruning 3D CNNs is largely unexplored possibly because of the complex nature of typical pruning algorithms that embeds pruning into an iterative optimization paradigm. In this work, we introduce a Resource Aware Neuron Pruning (RANP) algorithm that prunes 3D CNNs at initialization to high sparsity levels.…
Centre for Vision, Speech and Signal Processing (CVSSP)（视觉、语音与信号处理中心（CVSSP））；University of Surrey（萨里大学）
Convolution neural networks (CNNs) have shown great success in various applications. However, the computational complexity and memory storage of CNNs is a bottleneck for their deployment on resource-constrained devices. Recent efforts towards reducing the computation cost and the memory overhead of CNNs involve similarity-based passive filter pruning methods. Similarity-based passive filter pruning methods compute a pairwise similarity matrix for the filters and eliminate a few similar filters to obtain a small pruned CNN. However, the computational complexity of computing the pairwise similar…
Parameter pruning is a promising approach for CNN compression and acceleration by eliminating redundant model parameters with tolerable performance loss. Despite its effectiveness, existing regularization-based parameter pruning methods usually drive weights towards zero with large and constant regularization factors, which neglects the fact that the expressiveness of CNNs is fragile and needs a more gentle way of regularization for the networks to adapt during pruning. To solve this problem, we propose a new regularization-based pruning method (named IncReg) to incrementally assign different …
Object trackers deployed on low-power devices need to be light-weight, however, most of the current state-of-the-art (SOTA) methods rely on using compute-heavy backbones built using CNNs or transformers. Large sizes of such models do not allow their deployment in low-power conditions and designing compressed variants of large tracking models is of great importance. This paper demonstrates how highly compressed light-weight object trackers can be designed using neural architectural pruning of large CNN and transformer based trackers. Further, a comparative study on architectural choices best su…
SenseTime Research（商汤科技研究院）；The University of Hong Kong（香港大学）；Sun Yat-Sen University（中山大学）；The Chinese University of Hong Kong（香港中文大学）
Channel pruning is a popular technique for compressing convolutional neural networks (CNNs), where various pruning criteria have been proposed to remove the redundant filters. From our comprehensive experiments, we found two blind spots in the study of pruning criteria: (1) Similarity: There are some strong similarities among several primary pruning criteria that are widely cited and compared. According to these criteria, the ranks of filters'Importance Score are almost identical, resulting in similar pruned structures. (2) Applicability: The filters'Importance Score measured by some pruning c…
Robert Bosch GmbH（罗伯特·博世公司）；University of Freiburg（弗莱堡大学）；Institute for Autonomous Intelligent Systems（自主智能系统研究所）
Deep neural networks (DNNs) are usually over-parameterized to increase the likelihood of getting adequate initial weights by random initialization. Consequently, trained DNNs have many redundancies which can be pruned from the model to reduce complexity and improve the ability to generalize. Structural sparsity, as achieved by filter pruning, directly reduces the tensor sizes of weights and activations and is thus particularly effective for reducing complexity. We propose "Holistic Filter Pruning" (HFP), a novel approach for common DNN training that is easy to implement and enables to specify …
CNN model is a popular method for imagery analysis, so it could be utilized to recognize handwritten digits based on MNIST datasets. For higher recognition accuracy, various CNN models with different fully connected layer sizes are exploited to figure out the relationship between the CNN fully connected layer size and the recognition accuracy. Inspired by previous pruning work, we performed pruning methods of distinctiveness on CNN models and compared the pruning performance with NN models. For better pruning performances on CNN, the effect of angle threshold on the pruning performance was exp…
Laboratoire de Physique de l’École normale supérieure, ENS, Université PSL（巴黎高等师范学院物理实验室，巴黎高等师范学院，巴黎文理研究大学）；CNRS（法国国家科学研究中心）；Sorbonne Université（索邦大学）；Université de Paris（巴黎大学）
Pruning methods can considerably reduce the size of artificial neural networks without harming their performance. In some cases, they can even uncover sub-networks that, when trained in isolation, match or surpass the test accuracy of their dense counterparts. Here we study the inductive bias that pruning imprints in such "winning lottery tickets". Focusing on visual tasks, we analyze the architecture resulting from iterative magnitude pruning of a simple fully connected network (FCN). We show that the surviving node connectivity is local in input space, and organized in patterns reminiscent o…
Computer Network Information Center, Chinese Academy of Sciences（中国科学院计算机网络信息中心）；University of Chinese Academy of Sciences（中国科学院大学）；Visa Research（Visa研究院）；The Ohio State University（俄亥俄州立大学）
Convolutional neural networks (CNNs) have demonstrated extraordinarily good performance in many computer vision tasks. The increasing size of CNN models, however, prevents them from being widely deployed to devices with limited computational resources, e.g., mobile/embedded devices. The emerging topic of model pruning strives to address this problem by removing less important neurons and fine-tuning the pruned networks to minimize the accuracy loss. Nevertheless, existing automated pruning solutions often rely on a numerical threshold of the pruning criteria, lacking the flexibility to optimal…
University College Dublin（都柏林大学）；National University of Singapore（新加坡国立大学）
Using smart wearable devices to monitor patients electrocardiogram (ECG) for real-time detection of arrhythmias can significantly improve healthcare outcomes. Convolutional neural network (CNN) based deep learning has been used successfully to detect anomalous beats in ECG. However, the computational complexity of existing CNN models prohibits them from being implemented in low-powered edge devices. Usually, such models are complex with lots of model parameters which results in large number of computations, memory, and power usage in edge devices. Network pruning techniques can reduce model co…
The redundancy is widely recognized in Convolutional Neural Networks (CNNs), which enables to remove unimportant filters from convolutional layers so as to slim the network with acceptable performance drop. Inspired by the linear and combinational properties of convolution, we seek to make some filters increasingly close and eventually identical for network slimming. To this end, we propose Centripetal SGD (C-SGD), a novel optimization method, which can train several filters to collapse into a single point in the parameter hyperspace. When the training is completed, the removal of the identica…
Intel Labs（英特尔实验室）；University of Pittsburgh（匹兹堡大学）；Duke University（杜克大学）
Phenomenally successful in practical inference problems, convolutional neural networks (CNN) are widely deployed in mobile devices, data centers, and even supercomputers. The number of parameters needed in CNNs, however, are often large and undesirable. Consequently, various methods have been developed to prune a CNN once it is trained. Nevertheless, the resulting CNNs offer limited benefits. While pruning the fully connected layers reduces a CNN's size considerably, it does not improve inference speed noticeably as the compute heavy parts lie in convolutions. Pruning CNNs in a way that increa…
National Taiwan University of Science and Technology（国立台湾科技大学）
Pruning redundant filters in CNN models has received growing attention. In this paper, we propose an adaptive binary search-first hybrid pyramid- and clustering-based (ABSHPC-based) method for pruning filters automatically. In our method, for each convolutional layer, initially a hybrid pyramid data structure is constructed to store the hierarchical information of each filter. Given a tolerant accuracy loss, without parameters setting, we begin from the last convolutional layer to the first layer; for each considered layer with less or equal pruning rate relative to its previous layer, our ABS…
Convolutional neural networks (CNN) have achieved impressive performance on the wide variety of tasks (classification, detection, etc.) across multiple domains at the cost of high computational and memory requirements. Thus, leveraging CNNs for real-time applications necessitates model compression approaches that not only reduce the total number of parameters but reduce the overall computation as well. In this work, we present a stability-based approach for filter-level pruning of CNNs. We evaluate our proposed approach on different architectures (LeNet, VGG-16, ResNet, and Faster RCNN) and da…
National Key Laboratory for Novel Software Technology（计算机软件新技术国家重点实验室）；Nanjing University（南京大学）
This paper aims to simultaneously accelerate and compress off-the-shelf CNN models via filter pruning strategy. The importance of each filter is evaluated by the proposed entropy-based method first. Then several unimportant filters are discarded to get a smaller CNN model. Finally, fine-tuning is adopted to recover its generalization ability which is damaged during filter pruning. Our method can reduce the size of intermediate activations, which would dominate most memory footprint during model training stage but is less concerned in previous compression methods. Experiments on the ILSVRC-12 b…
The deployment of Convolutional Neural Networks (CNNs) on resource constrained platforms such as mobile devices and embedded systems has been greatly hindered by their high implementation cost, and thus motivated a lot research interest in compressing and accelerating trained CNN models. Among various techniques proposed in literature, structured pruning, especially channel pruning, has gain a lot focus due to 1) its superior performance in memory, computation, and energy reduction; and 2) it is friendly to existing hardware and software libraries. In this paper, we investigate the intermediat…
Network pruning in Convolutional Neural Networks (CNNs) has been extensively investigated in recent years. To determine the impact of pruning a group of filters on a network's accuracy, state-of-the-art pruning methods consistently assume filters of a CNN are independent. This allows the importance of a group of filters to be estimated as the sum of importances of individual filters. However, overparameterization in modern networks results in highly correlated filters that invalidate this assumption, thereby resulting in incorrect importance estimates. To address this issue, we propose OrthoRe…
While convolutional neural networks (CNN) have achieved impressive performance on various classification/recognition tasks, they typically consist of a massive number of parameters. This results in significant memory requirement as well as computational overheads. Consequently, there is a growing need for filter-level pruning approaches for compressing CNN based models that not only reduce the total number of parameters but reduce the overall computation as well. We present a new min-max framework for filter-level pruning of CNNs. Our framework, called Play and Prune (PP), jointly prunes and f…
OPPO US Research Center InnoPeak Technology（OPPO 美国研究中心 InnoPeak Technology）
For many years, the family of convolutional neural networks (CNNs) has been a workhorse in deep learning. Recently, many novel CNN structures have been designed to address increasingly challenging tasks. To make them work efficiently on edge devices, researchers have proposed various structured network pruning strategies to reduce their memory and computational cost. However, most of them only focus on reducing the number of filter channels per layer without considering the redundancy within individual filter channels. In this work, we explore pruning from another dimension, the kernel size. W…
Structure pruning is an effective method to compress and accelerate neural networks. While filter and channel pruning are preferable to other structure pruning methods in terms of realistic acceleration and hardware compatibility, pruning methods with a finer granularity, such as intra-channel pruning, are expected to be capable of yielding more compact and computationally efficient networks. Typical intra-channel pruning methods utilize a static and hand-crafted pruning granularity due to a large search space, which leaves room for improvement in their pruning performance. In this work, we in…
Singapore University of Technology and Design（新加坡科技设计大学）
Even though the Convolutional Neural Networks (CNN) has shown superior results in the field of computer vision, it is still a challenging task to implement computer vision algorithms in real-time at the edge, especially using a low-cost IoT device due to high memory consumption and computation complexities in a CNN. Network compression methodologies such as weight pruning, filter pruning, and quantization are used to overcome the above mentioned problem. Even though filter pruning methodology has shown better performances compared to other techniques, irregularity of the number of filters prun…
Structured pruning greatly eases the deployment of large neural networks in resource-constrained environments. However, current methods either involve strong domain expertise, require extra hyperparameter tuning, or are restricted only to a specific type of network, which prevents pervasive industrial applications. In this paper, we undertake a simple and effective approach that can be easily applied to both vision transformers and convolutional neural networks. Specifically, we consider pruning as an evolution process of sub-network structures that inherit weights through reconstruction techn…
The existence of redundancy in Convolutional Neural Networks (CNNs) enables us to remove some filters/channels with acceptable performance drops. However, the training objective of CNNs usually tends to minimize an accuracy-related loss function without any attention paid to the redundancy, making the redundancy distribute randomly on all the filters, such that removing any of them may trigger information loss and accuracy drop, necessitating a following finetuning step for recovery. In this paper, we propose to manipulate the redundancy during training to facilitate network pruning. To this e…
We present a filter pruning approach for deep model compression, using a multitask network. Our approach is based on learning a a pruner network to prune a pre-trained target network. The pruner is essentially a multitask deep neural network with binary outputs that help identify the filters from each layer of the original network that do not have any significant contribution to the model and can therefore be pruned. The pruner network has the same architecture as the original network except that it has a multitask/multi-output last layer containing binary-valued outputs (one per filter), whic…
Harbin Institute of Technology, Shenzhen（哈尔滨工业大学（深圳））；Tencent Youtu Lab（腾讯优图实验室）
Pruning has become a very powerful and effective technique to compress and accelerate modern neural networks. Existing pruning methods can be grouped into two categories: filter pruning (FP) and weight pruning (WP). FP wins at hardware compatibility but loses at the compression ratio compared with WP. To converge the strength of both methods, we propose to prune the filter in the filter. Specifically, we treat a filter $F \in \mathbb{R}^{C\times K\times K}$ as $K \times K$ stripes, i.e., $1\times 1$ filters $\in \mathbb{R}^{C}$, then by pruning the stripes instead of the whole filter, we can a…
Institute of Computing Technology, Chinese Academy of Sciences（中国科学院计算技术研究所）；University of Chinese Academy of Sciences（中国科学院大学）
Filter pruning is widely used to reduce the computation of deep learning, enabling the deployment of Deep Neural Networks (DNNs) in resource-limited devices. Conventional Hard Filter Pruning (HFP) method zeroizes pruned filters and stops updating them, thus reducing the search space of the model. On the contrary, Soft Filter Pruning (SFP) simply zeroizes pruned filters, keeping updating them in the following training epochs, thus maintaining the capacity of the network. However, SFP, together with its variants, converges much slower than HFP due to its larger search space. Our question is whet…
Hefei University of Technology（合肥工业大学）；Engineering Research Center of Safety Critical Industrial Measurement and Control Technology, Ministry of Education（教育部安全关键工业测控技术工程研究中心）
As the convolutional neural network (CNN) gets deeper and wider in recent years, the requirements for the amount of data and hardware resources have gradually increased. Meanwhile, CNN also reveals salient redundancy in several tasks. The existing magnitude-based pruning methods are efficient, but the performance of the compressed network is unpredictable. While the accuracy loss after pruning based on the structure sensitivity is relatively slight, the process is time-consuming and the algorithm complexity is notable. In this article, we propose a novel automatic channel pruning method (ACP).…
The recent trend toward increasingly deep convolutional neural networks (CNNs) leads to a higher demand of computational power and memory storage. Consequently, the deployment of CNNs in hardware has become more challenging. In this paper, we propose an Intra-Kernel Regular (IKR) pruning scheme to reduce the size and computational complexity of the CNNs by removing redundant weights at a fine-grained level. Unlike other pruning methods such as Fine-Grained pruning, IKR pruning maintains regular kernel structures that are exploitable in a hardware accelerator. Experimental results demonstrate u…
Channel pruning has received ever-increasing focus on network compression. In particular, class-discrimination based channel pruning has made major headway, as it fits seamlessly with the classification objective of CNNs and provides good explainability. Prior works singly propose and evaluate their discriminant functions, while further study on the effectiveness of the adopted metrics is absent. To this end, we initiate the first study on the effectiveness of a broad range of discriminant functions on channel pruning. Conventional single-variate binary-class statistics like Student's T-Test a…
George Mason University（乔治梅森大学）；Clarkson University（克拉克森大学）
Based on filter magnitude ranking (e.g. L1 norm), conventional filter pruning methods for Convolutional Neural Networks (CNNs) have been proved with great effectiveness in computation load reduction. Although effective, these methods are rarely analyzed in a perspective of filter functionality. In this work, we explore the filter pruning and the retraining through qualitative filter functionality interpretation. We find that the filter magnitude based method fails to eliminate the filters with repetitive functionality. And the retraining phase is actually used to reconstruct the remained filte…
The University of Tennessee Knoxville（田纳西大学诺克斯维尔分校）；Sun Yat-sen University（中山大学）
Convolutional neural network (CNN) pruning has become one of the most successful network compression approaches in recent years. Existing works on network pruning usually focus on removing the least important filters in the network to achieve compact architectures. In this study, we claim that identifying structural redundancy plays a more essential role than finding unimportant filters, theoretically and empirically. We first statistically model the network pruning problem in a redundancy reduction perspective and find that pruning in the layer(s) with the most structural redundancy outperfor…
Australian National University（澳大利亚国立大学）；Australian Centre for Robotic Vision（澳大利亚机器人视觉中心）；Microsoft Research（微软研究院）；Data61, CSIRO（联邦科学与工业研究组织Data61）；Amazon（亚马逊）
Although 3D Convolutional Neural Networks are essential for most learning based applications involving dense 3D data, their applicability is limited due to excessive memory and computational requirements. Compressing such networks by pruning therefore becomes highly desirable. However, pruning 3D CNNs is largely unexplored possibly because of the complex nature of typical pruning algorithms that embeds pruning into an iterative optimization paradigm. In this work, we introduce a Resource Aware Neuron Pruning (RANP) algorithm that prunes 3D CNNs at initialization to high sparsity levels. Specif…
Most neural network pruning methods, such as filter-level and layer-level prunings, prune the network model along one dimension (depth, width, or resolution) solely to meet a computational budget. However, such a pruning policy often leads to excessive reduction of that dimension, thus inducing a huge accuracy loss. To alleviate this issue, we argue that pruning should be conducted along three dimensions comprehensively. For this purpose, our pruning framework formulates pruning as an optimization problem. Specifically, it first casts the relationships between a certain model's accuracy and de…
Filter pruning is one of the most effective ways to accelerate and compress convolutional neural networks (CNNs). In this work, we propose a global filter pruning algorithm called Gate Decorator, which transforms a vanilla CNN module by multiplying its output by the channel-wise scaling factors, i.e. gate. When the scaling factor is set to zero, it is equivalent to removing the corresponding filter. We use Taylor expansion to estimate the change in the loss function caused by setting the scaling factor to zero and use the estimation for the global filter importance ranking. Then we prune the n…
Beijing University of Posts and Telecommunications（北京邮电大学）
Convolutional Neural Network (CNN) has an amount of parameter redundancy, filter pruning aims to remove the redundant filters and provides the possibility for the application of CNN on terminal devices. However, previous works pay more attention to designing evaluation criteria of filter importance and then prune less important filters with a fixed pruning rate or a fixed number to reduce convolutional neural networks' redundancy. It does not consider how many filters to reserve for each layer is the most reasonable choice. From this perspective, we propose a new filter pruning method by searc…
University of Maryland（马里兰大学）；NEC Labs America（NEC美国实验室）
The success of CNNs in various applications is accompanied by a significant increase in the computation and parameter storage costs. Recent efforts toward reducing these overheads involve pruning and compressing the weights of various layers without hurting original accuracy. However, magnitude-based pruning of weights reduces a significant number of parameters from the fully connected layers and may not adequately reduce the computation costs in the convolutional layers due to irregular sparsity in the pruned networks. We present an acceleration method for CNNs, where we prune filters from CN…
Tsinghua University（清华大学）；Nuctech AI R&D Center（Nuctech人工智能研发中心）
Filter pruning has drawn more attention since resource constrained platform requires more compact model for deployment. However, current pruning methods suffer either from the inferior performance of one-shot methods, or the expensive time cost of iterative training methods. In this paper, we propose a balanced filter pruning method for both performance and pruning speed. Based on the filter importance criteria, our method is able to prune a layer with approximate layer-wise optimal pruning rate at preset loss variation. The network is pruned in the layer-wise way without the time consuming pr…
Centrum Wiskunde & Informatica（数学与计算机科学中心）；Leiden Institute of Advanced Computer Science（莱顿高级计算机科学研究所）
Neural network pruning techniques can substantially reduce the computational cost of applying convolutional neural networks (CNNs). Common pruning methods determine which convolutional filters to remove by ranking the filters individually, i.e., without taking into account their interdependence. In this paper, we advocate the viewpoint that pruning should consider the interdependence between series of consecutive operators. We propose the LongEst-chAiN (LEAN) method that prunes CNNs by using graph-based algorithms to select relevant chains of convolutions. A CNN is interpreted as a graph, with…
Isfahan University of Technology（伊斯法罕理工大学）；McMaster University（麦克马斯特大学）
Filters are the essential elements in convolutional neural networks (CNNs). Filters are corresponded to the feature maps and form the main part of the computational and memory requirement for the CNN processing. In filter pruning methods, a filter with all of its components, including channels and connections, are removed. The removal of a filter can cause a drastic change in the network's performance. Also, the removed filters cannot come back to the network structure. We want to address these problems in this paper. We propose a CNN pruning method based on filter attenuation in which weak fi…
University of Technology Sydney（悉尼科技大学）；A*STAR Centre for Frontier AI Research (CFAR)（新加坡科技研究局前沿人工智能研究中心）；Zhejiang University（浙江大学）
Filter pruning is effective to reduce the computational costs of neural networks. Existing methods show that updating the previous pruned filter would enable large model capacity and achieve better performance. However, during the iterative pruning process, even if the network weights are updated to new values, the pruning criterion remains the same. In addition, when evaluating the filter importance, only the magnitude information of the filters is considered. However, in neural networks, filters do not work individually, but they would affect other filters. As a result, the magnitude informa…
Since the convolutional neural networks are often trained with redundant parameters, it is possible to reduce redundant kernels or filters to obtain a compact network without dropping the classification accuracy. In this paper, we propose a filter pruning method using the hierarchical group sparse regularization. It is shown in our previous work that the hierarchical group sparse regularization is effective in obtaining sparse networks in which filters connected to unnecessary channels are automatically close to zero. After training the convolutional neural network with the hierarchical group …
Technical University of Vienna（维也纳技术大学）；MIT（麻省理工学院）
In this paper, we present a novel sensitivity-based filter pruning algorithm (SbF-Pruner) to learn the importance scores of filters of each layer end-to-end. Our method learns the scores from the filter weights, enabling it to account for the correlations between the filters of each layer. Moreover, by training the pruning scores of all layers simultaneously our method can account for layer interdependencies, which is essential to find a performant sparse sub-network. Our proposed method can train and generate a pruned network from scratch in a straightforward, one-stage training process witho…
