The gravitational wave (GW) has opened a new window to the universe beyond the electromagnetic spectrum. Since 2015, dozens of GW events have been caught by the ground-based GW detectors through laser interferometry. However, all the ground-based detectors are L-shaped Michelson interferometers, with very limited directional response to GW. Here we propose a three-dimensional (3-D) laser interferometer detector in the shape of a regular triangular pyramid, which has more spherically symmetric antenna pattern. Moreover, the new configuration corresponds to much stronger constraints on parameters of GW sources, and is capable of constructing null-streams to get rid of the signal-like noise events. A 3-D detector of kilometer scale of such kind would shed new light on the joint search of GW and electromagnetic emission.
Terrestrial laser interferometers for gravitational-wave detection made the landmark first detection of gravitational waves in 2015. We provide an overview of the history of how these laser interferometers prevailed as the most promising technology in the search for gravitational waves. We describe their working principles and their limitations, and provide examples of some of the most important technologies that enabled their construction. We introduce each of the four large-scale laser interferometer gravitational-wave detectors in operation around the world today and provide a brief outlook…
Laser interferometer gravitational wave detectors can be operated at their free spectral range frequency. We show that in this case and when the interferometer is well understood one could detect a stochastic background using a single detector.
The Laser Interferometer Space Antenna will detect gravitational waves with frequencies from 0.1 mHz to 1 Hz. This article provides a brief overview of LISA's science goals followed by a tutorial of the LISA measurement concept.
Several km-scale gravitational-wave detectors have been constructed world wide. These instruments combine a number of advanced technologies to push the limits of precision length measurement. The core devices are laser interferometers of a new kind; developed from the classical Michelson topology these interferometers integrate additional optical elements, which significantly change the properties of the optical system. Much of the design and analysis of these laser interferometers can be performed using well-known classical optical techniques; however, the complex optical layouts provide a ne…
We report on the first demonstration of time-delay interferometry (TDI) for LISA, the Laser Interferometer Space Antenna. TDI was implemented in a laboratory experiment designed to mimic the noise couplings that will occur in LISA. TDI suppressed laser frequency noise by approximately 10^9 and clock phase noise by 6x10^4, recovering the intrinsic displacement noise floor of our laboratory test bed. This removal of laser frequency noise and clock phase noise in post-processing marks the first experimental validation of the LISA measurement scheme.
Laser frequency stabilization is notably one of the major challenges on the way to a space-borne gravitational wave observatory. The proposed Laser Interferometer Space Antenna (LISA) is presently under development in an ESA, NASA collaboration. We present a novel method for active laser stabilization and phase noise suppression in such a gravitational wave detector. The proposed approach is a further evolution of the "arm locking" method, which in essence consists of using an interferometer arm as an optical cavity, exploiting the extreme long-run stability of the cavity size in the frequency…
We present a new general design approach of a broad-band detector of gravitational radiation that relies on two atom interferometers separated by a distance L. In this scheme, only one arm and one laser will be used for operating the two atom interferometers. We consider atoms in the atom interferometers not only as perfect inertial reference sensors, but also as highly stable clocks. Atomic coherence is intrinsically stable and can be many orders of magnitude more stable than a laser. The unique one-laser configuration allows us to then apply time-delay interferometry to the responses of the …
In this paper we demonstrate that a double Michelson interferometer with Fabry-Perot cavities in its arms is able to perform laser- and displacement-noise-free gravitational-wave (GW) detection if certain model assumptions are met. Assuming the input mirrors of a single Michelson/Fabry-Perot interferometer can be rigidly attached to beamsplitter on a central platform one can manipulate with interferometer's response signals in a way to cancel laser noise and displacement noise of all test masses except the cental platform. A pair of symmetrically positioned Michelson/Fabry-Perot interferometer…
Arm-locking is a technique for stabilizing the frequency of a laser in an inter-spacecraft interferometer by using the spacecraft separation as the frequency reference. A candidate technique for future space-based gravitational wave detectors such as the Laser Interferometer Space Antenna (LISA), arm-locking has been extensive studied in this context through analytic models, time-domain simulations, and hardware-in-the-loop laboratory demonstrations. In this paper we show the Laser Ranging Interferometer instrument flying aboard the upcoming Gravity Recovery and Climate Experiment Follow-On (G…
We analyze and discuss the quantum noise in signal-recycled laser interferometer gravitational-wave detectors, such as Advanced LIGO, using a heterodyne readout scheme and taking into account the optomechanical dynamics. Contrary to homodyne detection, a heterodyne readout scheme can simultaneously measure more than one quadrature of the output field, providing an additional way of optimizing the interferometer sensitivity, but at the price of additional noise. Our analysis provides the framework needed to evaluate whether a homodyne or heterodyne readout scheme is more optimal for second gene…
The purpose of this paper is twofold. First, we will present recent results on the data processing for LISA, including algorithms for elimination of clock jitter noise and discussion of the generation of the data averages that will eventually need to be telemetered to the ground. Second, we will argue, based partly on these results, that a laser interferometer tracking system (LITS) that employs independent lasers in each spacecraft is preferable for reasons of simplicity to that in which the lasers in two of the spacecraft are locked to the incoming beam from the third.
By mapping the signal-recycling (SR) optical configuration to a three-mirror cavity, and then to a single detuned cavity, we express SR optomechanical dynamics, input--output relation and noise spectral density in terms of only three characteristic parameters: the (free) optical resonant frequency and decay time of the entire interferometer, and the laser power circulating in arm cavities. These parameters, and therefore the properties of the interferometer, are invariant under an appropriate scaling of SR-mirror reflectivity, SR detuning, arm-cavity storage time and input power at beamsplitte…
We show that a recent claim that matter wave interferometers have a much higher sensitivity than laser interferometers for a comparable physical setup is unfounded. We point out where the mistake in the earlier analysis is made. We also disprove the claim that only a description based on the geodesic deviation equation can produce the correct physical result. The equations for the quantum dynamics of non-relativistic massive particles in a linearly perturbed spacetime derived here are useful for treating a wider class of related physical problems. A general discussion on the use of atom interf…
Laser interferometer detectors are now widely used in an attempt to detect gravitational waves (gw). The interaction of the gw with the light circulating in the interferometer is usually explained in terms of the motion of the "free" mirrors that form the interferometer arms. It is however instructive to show that the same result can be obtained by simply calculating the propagation of an electromagnetic plane wave between "free mirrors" in the curved space-time induced by the gw. One finds that the plane wave acquires frequency modulation sidebands at the gw frequency, as would be expected fr…
Atom-interferometer gravitational-wave (GW) observatory, as a new design of ground-based GW detector for the near future, is sensitive at a relatively low frequency for GW observations. Taking the proposed atom interferometer Zhaoshan Long-baseline Atom Interferometer Gravitation Antenna (ZAIGA), and its illustrative upgrade (Z+) as examples, we investigate how the atom interferometer will complement ground-based laser interferometers in testing the gravitational dipole radiation from binary neutron star (BNS) mergers. A test of such kind is important for a better understanding of the strong e…
Mirror thermal noise is and will remain one of the main limitations to the sensitivity of gravitational wave detectors based on laser interferometers. We report about projected mirror thermal noise due to losses in the mirror coatings and substrates. The evaluation includes all kind of thermal noises presently known. Several of the envisaged substrate and coating materials are considered. The results for mirrors operated at room temperature and at cryogenic temperature are reported.
When a stellar-mass compact object is captured by a supermassive black hole located in a galactic centre, the system losses energy and angular momentum by the emission of gravitational waves. Subsequently, the stellar compact object evolves inspiraling until plunging onto the massive black hole. These EMRI systems are expected to be one of the main sources of gravitational waves for the future space-based Laser Interferometer Space Antenna (LISA). However, the detection of EMRI signals will require of very accurate theoretical templates taking into account the gravitational self-force, which i…
The interferometers being planned for second generation LIGO promise and order of magnitude increase in broadband strain sensitivity--with the corresponding cubic increase in detection volume--and an extension of the observation band to lower frequencies. In addition, one of the interferometers may be designed for narrowband performance, giving further improved sensitivity over roughly an octave band above a few hundred Hertz. This article discusses the physics and technology of these new interferometer designs, and presents their projected sensitivity spectra.
This letter reports the results of a search for a stochastic background of gravitational waves (GW) at 100 MHz by laser interferometry. We have developed a GW detector, which is a pair of 75-cm baseline synchronous recycling (resonant recycling) interferometers. Each interferometer has a strain sensitivity of ~ 10^{-16} Hz^{-1/2} at 100 MHz. By cross-correlating the outputs of the two interferometers within 1000 seconds, we found h_{100}^2 Omega_{gw} < 6 times 10^{25} to be an upper limit on the energy density spectrum of the GW background in a 2-kHz bandwidth around 100 MHz, where a flat spec…
We consider a class of proposed gravitational wave detectors based on multiple atomic interferometers separated by large baselines and referenced by common laser systems. We compute the sensitivity limits of these detectors due to intrinsic phase noise of the light sources, non-inertial motion of the light sources, and atomic shot noise and compare them to sensitivity limits for traditional light interferometers. We find that atom interferometers and light interferometers are limited in a nearly identical way by intrinsic phase noise and that both require similar mitigation strategies (e.g. mu…
In order to detect the rare astrophysical events that generate gravitational wave (GW) radiation, sufficient stability is required for GW antennas to allow long-term observation. In practice, seismic excitation is one of the most common disturbances effecting stable operation of suspended-mirror laser interferometers. A straightforward means to allow more stable operation is therefore to locate the antenna, the ``observatory'', at a ``quiet'' site. A laser interferometer gravitational wave antenna with a baseline length of 20m (LISM) was developed at a site 1000m underground, near Kamioka, Jap…
Dual recycling is an advanced optical technique to enhance the signal-to-noise ratio of laser interferometric gravitational wave detectors in a limited bandwidth. To optimise the center of this band with respect to Fourier frequencies of expected gravitational wave signals detuned dual recycling has to be implemented. We demonstrated detuned dual recycling on a fully suspended 30m prototype interferometer. A control scheme that allows to tune the detector to different frequencies will be outlined. Good agreement between the experimental results and numerical simulations has been achieved.
We analyze the response of the gravitational wave detector to a scalar massive plane gravitational wave. We give the compact form of the response and discuss its angular and frequency characteristics. The derivations is carried out in the conformal and the synchronous gauges and the equivalence of the two approaches is shown. In the case of the massive Brans-Dicke theory we solve the linearized vacuum field equations in the two gauges as well.
We extend the formalisms developed in Gair et al. and Cornish and van Haasteren to create maps of gravitational-wave backgrounds using a network of ground-based laser interferometers. We show that in contrast to pulsar timing arrays, which are insensitive to half of the gravitational-wave sky (the curl modes), a network of ground-based interferometers is sensitive to both the gradient and curl components of the background. The spatial separation of a network of interferometers, or of a single interferometer at different times during its rotational and orbital motion around the Sun, allows for …
Laser interferometer response to a plane gravitational wave on the Minkowski background is given. The derivation does not assume any particular gauge within a class compatible with almost Minkowskian coordinates that preserve a plane wave form of the solutions. Consequently all ten modes of the metric are taken into an account. The final result, the time of flight of a laser signal exchanged between freely moving observers, is expressed in the form of integrals of the metric perturbations taken along the undisturbed trajectories. The result can be applied in any metric theory o gravity; it is …
The observed microwave background anisotropies in combination with the theory of quantum mechanically generated cosmological perturbations predict a well measurable amount of relic gravitational waves in the frequency intervals tested by LISA and ground-based laser interferometers.
The random superposition of many weak sources will produce a stochastic background of gravitational waves that may dominate the response of the LISA (Laser Interferometer Space Antenna) gravitational wave observatory. Unless something can be done to distinguish between a stochastic background and detector noise, the two will combine to form an effective noise floor for the detector. Two methods have been proposed to solve this problem. The first is to cross-correlate the output of two independent interferometers. The second is an ingenious scheme for monitoring the instrument noise by operatin…
We propose a class of displacement- and laser-noise free gravitational-wave-interferometer configurations, which does not sense non-geodesic mirror motions and laser noises, but provides non-vanishing gravitational-wave signal. Our interferometer consists of 4 mirrors and 2 beamsplitters, which form 4 Mach-Zehnder interferometers. By contrast to previous works, no composite mirrors are required. Each mirror in our configuration is sensed redundantly, by at least two pairs of incident and reflected beams. Displacement- and laser-noise free detection is achieved when output signals from these 4 …
Using the force-susceptibility formalism of linear quantum measurements, we study the dynamics of signal recycled interferometers, such as LIGO-II. We show that, although the antisymmetric mode of motion of the four arm-cavity mirrors is originally described by a free mass, when the signal-recycling mirror is added to the interferometer, the radiation-pressure force not only disturbs the motion of that ``free mass'' randomly due to quantum fluctuations, but also and more fundamentally, makes it respond to forces as though it were connected to a spring with a specific optical-mechanical rigidit…
Sensitivity of gravitational-wave detectors is limited in the high-frequency band by quantum shot noise and eventually limited by the optical loss in signal recycling cavity. This limit is the main obstacle on the way to detect gravitational waves from the binary neutron star mergers in the current and the future generation detectors, as it does not depend on either the arm length, or the injected squeezing level. In this paper, we come up with the sloshing Sagnac interferometer topology, which can be obtained from the Michelson interferometer by optically connecting the end mirrors into an ad…
We have demonstrated displacement- and frequency-noise free laser interferometry (DFI) by partially implementing a recently proposed optical configuration using bi-directional Mach-Zehnder interferometers (MZI). This partial implementation, the minimum necessary to be called DFI, has confirmed the essential feature of DFI: the combination of two MZI signals can be carried out in a way which cancels displacement noise of the mirrors while maintaining gravitational wave signals. The attained maximum displacement noise suppression allowed a simulated-SNR of 45dB.
Some next-generation gravitational-wave detectors, such as the American Advanced LIGO project and the Japanese LCGT project, plan to use power recycled resonant sideband extraction (RSE) interferometers for their interferometer's optical configuration. A power recycled zero-detuning (PRZD) RSE interferometer, which is the default design for LCGT, has five main length degrees of freedom that need to be controlled in order to operate a gravitational-wave detector. This task is expected to be very challenging because of the complexity of optical configuration. A new control scheme for a PRZD RSE …
It is shown that the expected amplitudes and specific correlation properties of the relic (squeezed) gravitational wave background may allow the registration of the relic gravitational waves by the first generation of sensitive gravity-wave detectors.
We propose a method to probe the equation of state of the early universe and its evolution, using the stochastic gravitational wave background from inflation. A small deviation from purely radiation dominated universe ($w= 1/3$) would be clearly imprinted on the gravitational wave spectrum $Ω_{GW}(f)$ due to the nearly scale invariant nature of inflationary generated waves.
The goal of the Laser Interferometric Gravitational-Wave Observatory (LIGO) is to detect and study gravitational waves of astrophysical origin. Direct detection of gravitational waves holds the promise of testing general relativity in the strong-field regime, of providing a new probe of exotic objects such as black hole and neutron stars, and of uncovering unanticipated new astrophysics. LIGO, a joint Caltech-MIT project supported by the National Science Foundation, operates three multi-kilometer interferometers at two widely separated sites in the United States. These detectors are the result…
The upcoming European design study `Einstein gravitational-wave Telescope' represents the first step towards a substantial, international effort for the design of a third-generation interferometric gravitational wave detector. It is generally believed that third-generation instruments might not be installed into existing infrastructures but will provoke a new search for optimal detector sites. Consequently, the detector design could be subject to fewer constraints than the on-going design of the second generation instruments. In particular, it will be prudent to investigate alternatives to the…
Space gravitational wave detectors employing laser interferometry between free-flying spacecraft differ in many ways from their laboratory counterparts. Among these differences is the fact that, in space, the end-masses will be moving relative to each other. This creates a problem by inducing a Doppler shift between the incoming and outgoing frequencies. The resulting beat frequency is so high that its phase cannot be read to sufficient accuracy when referenced to state-of-the-art space-qualified clocks. This is the problem that is addressed in this paper. We introduce a set of time-domain alg…
Bayesian analysis of LISA data sets based on Markov chain Monte Carlo methods has been shown to be a challenging problem, in part due to the complicated structure of the likelihood function consisting of several isolated local maxima that dramatically reduces the efficiency of the sampling techniques. Here we introduce a new fully Markovian algorithm, a Delayed Rejection Metropolis-Hastings Markov chain Monte Carlo method, to efficiently explore these kind of structures and we demonstrate its performance on selected LISA data sets containing a known number of stellar-mass binary signals embedd…
Using a quantum mechanical approach, we show that in a gravitational-wave interferometer composed of arm cavities and a signal recycling cavity, e.g., the LIGO-II configuration, the radiation-pressure force acting on the mirrors not only disturbs the motion of the free masses randomly due to quantum fluctuations, but also and more fundamentally, makes them respond to forces as though they were connected to an (optical) spring with a specific rigidity. This oscillatory response gives rise to a much richer dynamics than previously known, which enhances the possibilities for reshaping the LIGO-II…
We show that pairs of widely separated interferometers are advantageous for measuring the Stokes parameter V of a stochastic background of gravitational waves. This parameter characterizes asymmetry of amplitudes of right- and left-handed waves and generation of the asymmetry is closely related to parity violation in the early universe. The advantageous pairs include LIGO(Livingston)-LCGT and AIGO-Virgo that are relatively insensitive to Omega_GW (the simple intensity of the background). Using at least three detectors, information of the intensity Omega_GW and the degree of asymmetry V can be …
We present a real-time differential phasefront detector sensitive to better than 3 mrad rms, which corresponds to a precision of about 500 pm. This detector performs a spatially resolving measurement of the phasefront of a heterodyne interferometer, with heterodyne frequencies up to approximately 10 kHz. This instrument was developed as part of the research for the LISA Technology Package (LTP) interferometer, and will assist in the manufacture of its flight model. Due to the advantages this instrument offers, it also has general applications in optical metrology.
An interferometer design that cancels all displacement noises of its test masses and maintains a gravitational-wave (GW) signal by combining multiple detector signals is called a displacement noise-free interferometer (DFI). The idea has been considered previously for a laser interferometer. However, a limitation of a laser DFI is that its sensitive frequency band is too high for astrophysical GW sources, $\sim 10^5\,{\rm Hz}$ even for a kilometer-sized interferometer. To circumvent this limitation, in this paper, we propose a neutron DFI, in which neutrons are used instead of light. Since neu…
We investigate the possibility of measuring the primordial gravitational wave (GW) signal across 21 decades in frequencies, using the cosmic microwave background (CMB), pulsar timing arrays (PTA), and laser and atomic interferometers. For the CMB and PTA experiments we consider the LiteBIRD mission and the Square Kilometer Array (SKA), respectively. For the interferometers we consider space mission proposals including the Laser Interferometer Space Antenna (LISA), the Big Bang Observer (BBO), the Deci-hertz Interferometer Gravitational wave Observatory (DECIGO), the $μ$Ares experiment, the Dec…
We propose a simple way to improve the laser gravitational-wave detectors sensitivity by means of reduction of the number of reflective coating layers of the core optics mirrors. This effects in the proportional decrease of the coating thermal noise, the most notorious among the interferometers technical noise sources. The price for this is the increased quantum noise, as well as high requirements for the pump laser power and power at the beamsplitter. However, as far as these processes depend differently on the coating thickness, we demonstrate that a certain trade-off is possible, yielding a…
LIGO --- The Laser Interferometer Gravitational-Wave Observatory --- is one of several large projects being undertaken in the United States, Europe and Japan to detect gravitational radiation. The novelty and precision of these instruments is such that large volumes of data will be generated in an attempt to find a small number of weak signals, which can be identified only as subtle changes in the instrument output over time. In this paper, I discuss the how the nature of the LIGO experiment determines the size of the data archive that will be produced, how the nature of the analyses that must…
The gravitational wave detector of higher sensitivity and greater bandwidth in kilohertz window is required for future gravitational wave astronomy and cosmology. Here we present a new type broadband high frequency laser interferometer gravitational wave detector utilizing polarization of light as signal carrier. Except for Fabry-Perot cavity arms we introduce dual power recycling to further amplify the gravitational wave signals. A novel method of weak measurement amplification is used to amplify signals for detection and to guarantee the long-term run of detector. Equipped with squeezed ligh…
Jiggled interferometer: Ground-based gravitational wave detector using rapidly-repeated free-falling test masses
Nagoya University（名古屋大学）；Syracuse University（雪城大学）；The University of Tokyo（东京大学）；Kavli Institute for the Physics and Mathematics of the Universe (Kavli IPMU), WPI, UTIAS, The University of Tokyo（理化学研究所宇宙粒子天体物理研究所（Kavli IPMU））；Institute of Space and Astronautical Science, Japan Aerospace Exploration Agency（日本宇宙航空研究开发机构宇宙科学研究所）；Institute for Cosmic Ray Research, The University of Tokyo（东京大学宇宙射线研究所）；National Astronomical Observatory of Japan（日本国立天文台）
The beamplitter in high-power interferometers is subject to significant radiation-pressure fluctuations. As a consequence, the phase relations which appear in the beamsplitter coupling equations oscillate and phase modulation fields are generated which add to the reflected fields. In this paper, the transfer function of the various input fields impinging on the beamsplitter from all four ports onto the output field is presented including radiation-pressure effects. We apply the general solution of the coupling equations to evaluate the input-output relations of the dual-recycled laser-interfer…
The first terrestrial gravitational wave interferometers have dramatically underscored the scientific value of observing the Universe through an entirely different window, and of folding this new channel of information with traditional astronomical data for a multimessenger view. The Laser Interferometer Space Antenna (LISA) will broaden the reach of gravitational wave astronomy by conducting the first survey of the millihertz gravitational wave sky, detecting tens of thousands of individual astrophysical sources ranging from white-dwarf binaries in our own galaxy to mergers of massive black h…
For further gravitational wave (GW) detections, it is significant to invent a technique to reduce all kinds of mirror displacement noise dominant at low frequencies for ground-based detectors. The neutron displacement-noise-free interferometer (DFI) is one of the tools to reduce all the mirror displacement noise at lower frequencies. In this paper, we describe a further simplified configuration of a neutron DFI in terms of neutron incidence direction. In the new configuration, neutrons enter the interferometer with unidirectional incidence at four speeds as opposed to two bidirectional inciden…
Inelastic back-scattering of stray light is a long-standing and fundamental problem in high-sensitivity interferometric measurements and a potential limitation for advanced gravitational-wave detectors. The emerging parasitic interferences cannot be distinguished from a scientific signal via conventional single readout. In this work, we propose the subtraction of inelastic back-scatter signals by employing dual homodyne detection on the output light, and demonstrate it for a table-top Michelson interferometer. The additional readout contains solely parasitic signals and is used to model the sc…
We consider the implications for laser interferometry of the quantum-gravity-motivated modifications in the laws of particle propagation, which are presently being considered in attempts to explain puzzling observations of ultra-high-energy cosmic rays. We show that there are interferometric setups in which the Planck-scale effect on propagation leads to a characteristic signature. A naive estimate is encouraging with respect to the possibility of achieving Planck-scale sensitivity, but we also point out some severe technological challenges which would have to be overcome in order to achieve t…
Detection of gravitational waves (GW) opened new windows on fundamental physics and it would be natural to search how the role of extra dimensional effects can be traced to gravitational wave physics. In this article, we consider a toy model of five dimensional pure gravity theory compactified on a circle. The resulting four dimensional theory is a scalar-Maxwell theory which is minimally coupled with gravity. By finding the equations of motion for scalar, electric and magnetic fields , we would be able to find exact wave solutions of coupled equations which are zero mode solutions. We also pe…
