This letter reports the results of a search for a stochastic background of gravitational waves (GW) at 100 MHz by laser interferometry. We have developed a GW detector, which is a pair of 75-cm baseline synchronous recycling (resonant recycling) interferometers. Each interferometer has a strain sensitivity of ~ 10^{-16} Hz^{-1/2} at 100 MHz. By cross-correlating the outputs of the two interferometers within 1000 seconds, we found h_{100}^2 Omega_{gw} < 6 times 10^{25} to be an upper limit on the energy density spectrum of the GW background in a 2-kHz bandwidth around 100 MHz, where a flat spectrum is assumed.
Recently, observational searches for gravitational wave background (GWB) have developed and given direct and indirect constraints on the energy density of GWB in a broad range of frequencies. These constraints have already rejected some theoretical models of large GWB spectra. However, at 100 MHz, there is no strict upper limit from direct observation, though the indirect limit by He4 abundance due to big-bang nucleosynthesis exists. In this paper, we propose an experiment with laser interferometers searching GWB at 100 MHz. We considered three detector designs and evaluated the GW response fu…
Laser interferometer gravitational wave detectors can be operated at their free spectral range frequency. We show that in this case and when the interferometer is well understood one could detect a stochastic background using a single detector.
The Laser Interferometer Space Antenna will detect gravitational waves with frequencies from 0.1 mHz to 1 Hz. This article provides a brief overview of LISA's science goals followed by a tutorial of the LISA measurement concept.
Laser frequency stabilization is notably one of the major challenges on the way to a space-borne gravitational wave observatory. The proposed Laser Interferometer Space Antenna (LISA) is presently under development in an ESA, NASA collaboration. We present a novel method for active laser stabilization and phase noise suppression in such a gravitational wave detector. The proposed approach is a further evolution of the "arm locking" method, which in essence consists of using an interferometer arm as an optical cavity, exploiting the extreme long-run stability of the cavity size in the frequency…
We present a new general design approach of a broad-band detector of gravitational radiation that relies on two atom interferometers separated by a distance L. In this scheme, only one arm and one laser will be used for operating the two atom interferometers. We consider atoms in the atom interferometers not only as perfect inertial reference sensors, but also as highly stable clocks. Atomic coherence is intrinsically stable and can be many orders of magnitude more stable than a laser. The unique one-laser configuration allows us to then apply time-delay interferometry to the responses of the …
In this paper we demonstrate that a double Michelson interferometer with Fabry-Perot cavities in its arms is able to perform laser- and displacement-noise-free gravitational-wave (GW) detection if certain model assumptions are met. Assuming the input mirrors of a single Michelson/Fabry-Perot interferometer can be rigidly attached to beamsplitter on a central platform one can manipulate with interferometer's response signals in a way to cancel laser noise and displacement noise of all test masses except the cental platform. A pair of symmetrically positioned Michelson/Fabry-Perot interferometer…
We analyze and discuss the quantum noise in signal-recycled laser interferometer gravitational-wave detectors, such as Advanced LIGO, using a heterodyne readout scheme and taking into account the optomechanical dynamics. Contrary to homodyne detection, a heterodyne readout scheme can simultaneously measure more than one quadrature of the output field, providing an additional way of optimizing the interferometer sensitivity, but at the price of additional noise. Our analysis provides the framework needed to evaluate whether a homodyne or heterodyne readout scheme is more optimal for second gene…
The purpose of this paper is twofold. First, we will present recent results on the data processing for LISA, including algorithms for elimination of clock jitter noise and discussion of the generation of the data averages that will eventually need to be telemetered to the ground. Second, we will argue, based partly on these results, that a laser interferometer tracking system (LITS) that employs independent lasers in each spacecraft is preferable for reasons of simplicity to that in which the lasers in two of the spacecraft are locked to the incoming beam from the third.
By mapping the signal-recycling (SR) optical configuration to a three-mirror cavity, and then to a single detuned cavity, we express SR optomechanical dynamics, input--output relation and noise spectral density in terms of only three characteristic parameters: the (free) optical resonant frequency and decay time of the entire interferometer, and the laser power circulating in arm cavities. These parameters, and therefore the properties of the interferometer, are invariant under an appropriate scaling of SR-mirror reflectivity, SR detuning, arm-cavity storage time and input power at beamsplitte…
We show that a recent claim that matter wave interferometers have a much higher sensitivity than laser interferometers for a comparable physical setup is unfounded. We point out where the mistake in the earlier analysis is made. We also disprove the claim that only a description based on the geodesic deviation equation can produce the correct physical result. The equations for the quantum dynamics of non-relativistic massive particles in a linearly perturbed spacetime derived here are useful for treating a wider class of related physical problems. A general discussion on the use of atom interf…
Laser interferometer detectors are now widely used in an attempt to detect gravitational waves (gw). The interaction of the gw with the light circulating in the interferometer is usually explained in terms of the motion of the "free" mirrors that form the interferometer arms. It is however instructive to show that the same result can be obtained by simply calculating the propagation of an electromagnetic plane wave between "free mirrors" in the curved space-time induced by the gw. One finds that the plane wave acquires frequency modulation sidebands at the gw frequency, as would be expected fr…
Mirror thermal noise is and will remain one of the main limitations to the sensitivity of gravitational wave detectors based on laser interferometers. We report about projected mirror thermal noise due to losses in the mirror coatings and substrates. The evaluation includes all kind of thermal noises presently known. Several of the envisaged substrate and coating materials are considered. The results for mirrors operated at room temperature and at cryogenic temperature are reported.
The interferometers being planned for second generation LIGO promise and order of magnitude increase in broadband strain sensitivity--with the corresponding cubic increase in detection volume--and an extension of the observation band to lower frequencies. In addition, one of the interferometers may be designed for narrowband performance, giving further improved sensitivity over roughly an octave band above a few hundred Hertz. This article discusses the physics and technology of these new interferometer designs, and presents their projected sensitivity spectra.
Dual recycling is an advanced optical technique to enhance the signal-to-noise ratio of laser interferometric gravitational wave detectors in a limited bandwidth. To optimise the center of this band with respect to Fourier frequencies of expected gravitational wave signals detuned dual recycling has to be implemented. We demonstrated detuned dual recycling on a fully suspended 30m prototype interferometer. A control scheme that allows to tune the detector to different frequencies will be outlined. Good agreement between the experimental results and numerical simulations has been achieved.
We analyze the response of the gravitational wave detector to a scalar massive plane gravitational wave. We give the compact form of the response and discuss its angular and frequency characteristics. The derivations is carried out in the conformal and the synchronous gauges and the equivalence of the two approaches is shown. In the case of the massive Brans-Dicke theory we solve the linearized vacuum field equations in the two gauges as well.
We extend the formalisms developed in Gair et al. and Cornish and van Haasteren to create maps of gravitational-wave backgrounds using a network of ground-based laser interferometers. We show that in contrast to pulsar timing arrays, which are insensitive to half of the gravitational-wave sky (the curl modes), a network of ground-based interferometers is sensitive to both the gradient and curl components of the background. The spatial separation of a network of interferometers, or of a single interferometer at different times during its rotational and orbital motion around the Sun, allows for …
Laser interferometer response to a plane gravitational wave on the Minkowski background is given. The derivation does not assume any particular gauge within a class compatible with almost Minkowskian coordinates that preserve a plane wave form of the solutions. Consequently all ten modes of the metric are taken into an account. The final result, the time of flight of a laser signal exchanged between freely moving observers, is expressed in the form of integrals of the metric perturbations taken along the undisturbed trajectories. The result can be applied in any metric theory o gravity; it is …
We propose a class of displacement- and laser-noise free gravitational-wave-interferometer configurations, which does not sense non-geodesic mirror motions and laser noises, but provides non-vanishing gravitational-wave signal. Our interferometer consists of 4 mirrors and 2 beamsplitters, which form 4 Mach-Zehnder interferometers. By contrast to previous works, no composite mirrors are required. Each mirror in our configuration is sensed redundantly, by at least two pairs of incident and reflected beams. Displacement- and laser-noise free detection is achieved when output signals from these 4 …
Using the force-susceptibility formalism of linear quantum measurements, we study the dynamics of signal recycled interferometers, such as LIGO-II. We show that, although the antisymmetric mode of motion of the four arm-cavity mirrors is originally described by a free mass, when the signal-recycling mirror is added to the interferometer, the radiation-pressure force not only disturbs the motion of that ``free mass'' randomly due to quantum fluctuations, but also and more fundamentally, makes it respond to forces as though it were connected to a spring with a specific optical-mechanical rigidit…
The goal of the Laser Interferometric Gravitational-Wave Observatory (LIGO) is to detect and study gravitational waves of astrophysical origin. Direct detection of gravitational waves holds the promise of testing general relativity in the strong-field regime, of providing a new probe of exotic objects such as black hole and neutron stars, and of uncovering unanticipated new astrophysics. LIGO, a joint Caltech-MIT project supported by the National Science Foundation, operates three multi-kilometer interferometers at two widely separated sites in the United States. These detectors are the result…
Space gravitational wave detectors employing laser interferometry between free-flying spacecraft differ in many ways from their laboratory counterparts. Among these differences is the fact that, in space, the end-masses will be moving relative to each other. This creates a problem by inducing a Doppler shift between the incoming and outgoing frequencies. The resulting beat frequency is so high that its phase cannot be read to sufficient accuracy when referenced to state-of-the-art space-qualified clocks. This is the problem that is addressed in this paper. We introduce a set of time-domain alg…
Bayesian analysis of LISA data sets based on Markov chain Monte Carlo methods has been shown to be a challenging problem, in part due to the complicated structure of the likelihood function consisting of several isolated local maxima that dramatically reduces the efficiency of the sampling techniques. Here we introduce a new fully Markovian algorithm, a Delayed Rejection Metropolis-Hastings Markov chain Monte Carlo method, to efficiently explore these kind of structures and we demonstrate its performance on selected LISA data sets containing a known number of stellar-mass binary signals embedd…
Atom-interferometer gravitational-wave (GW) observatory, as a new design of ground-based GW detector for the near future, is sensitive at a relatively low frequency for GW observations. Taking the proposed atom interferometer Zhaoshan Long-baseline Atom Interferometer Gravitation Antenna (ZAIGA), and its illustrative upgrade (Z+) as examples, we investigate how the atom interferometer will complement ground-based laser interferometers in testing the gravitational dipole radiation from binary neutron star (BNS) mergers. A test of such kind is important for a better understanding of the strong e…
Using a quantum mechanical approach, we show that in a gravitational-wave interferometer composed of arm cavities and a signal recycling cavity, e.g., the LIGO-II configuration, the radiation-pressure force acting on the mirrors not only disturbs the motion of the free masses randomly due to quantum fluctuations, but also and more fundamentally, makes them respond to forces as though they were connected to an (optical) spring with a specific rigidity. This oscillatory response gives rise to a much richer dynamics than previously known, which enhances the possibilities for reshaping the LIGO-II…
An interferometer design that cancels all displacement noises of its test masses and maintains a gravitational-wave (GW) signal by combining multiple detector signals is called a displacement noise-free interferometer (DFI). The idea has been considered previously for a laser interferometer. However, a limitation of a laser DFI is that its sensitive frequency band is too high for astrophysical GW sources, $\sim 10^5\,{\rm Hz}$ even for a kilometer-sized interferometer. To circumvent this limitation, in this paper, we propose a neutron DFI, in which neutrons are used instead of light. Since neu…
We propose a simple way to improve the laser gravitational-wave detectors sensitivity by means of reduction of the number of reflective coating layers of the core optics mirrors. This effects in the proportional decrease of the coating thermal noise, the most notorious among the interferometers technical noise sources. The price for this is the increased quantum noise, as well as high requirements for the pump laser power and power at the beamsplitter. However, as far as these processes depend differently on the coating thickness, we demonstrate that a certain trade-off is possible, yielding a…
In order to detect the rare astrophysical events that generate gravitational wave (GW) radiation, sufficient stability is required for GW antennas to allow long-term observation. In practice, seismic excitation is one of the most common disturbances effecting stable operation of suspended-mirror laser interferometers. A straightforward means to allow more stable operation is therefore to locate the antenna, the ``observatory'', at a ``quiet'' site. A laser interferometer gravitational wave antenna with a baseline length of 20m (LISM) was developed at a site 1000m underground, near Kamioka, Jap…
The beamplitter in high-power interferometers is subject to significant radiation-pressure fluctuations. As a consequence, the phase relations which appear in the beamsplitter coupling equations oscillate and phase modulation fields are generated which add to the reflected fields. In this paper, the transfer function of the various input fields impinging on the beamsplitter from all four ports onto the output field is presented including radiation-pressure effects. We apply the general solution of the coupling equations to evaluate the input-output relations of the dual-recycled laser-interfer…
Terrestrial laser interferometers for gravitational-wave detection made the landmark first detection of gravitational waves in 2015. We provide an overview of the history of how these laser interferometers prevailed as the most promising technology in the search for gravitational waves. We describe their working principles and their limitations, and provide examples of some of the most important technologies that enabled their construction. We introduce each of the four large-scale laser interferometer gravitational-wave detectors in operation around the world today and provide a brief outlook…
Detection of gravitational waves (GW) opened new windows on fundamental physics and it would be natural to search how the role of extra dimensional effects can be traced to gravitational wave physics. In this article, we consider a toy model of five dimensional pure gravity theory compactified on a circle. The resulting four dimensional theory is a scalar-Maxwell theory which is minimally coupled with gravity. By finding the equations of motion for scalar, electric and magnetic fields , we would be able to find exact wave solutions of coupled equations which are zero mode solutions. We also pe…
Theories of quantum gravity based on the holographic principle predict the existence of quantum fluctuations of distance measurements that accumulate and exhibit correlations over macroscopic distances. This paper models an expected signal due to this phenomenology, and details the design and estimated sensitivity of co-located twin table-top 3D interferometers being built to measure or constrain it. The experiment is estimated to be sensitive to displacements $\sim10^{-19}\,\rm{m}/\sqrt{\rm{Hz}}$ in a frequency band between 1 and 250 MHz, surpassing previous experiments and enabling the possi…
The random superposition of many weak sources will produce a stochastic background of gravitational waves that may dominate the response of the LISA (Laser Interferometer Space Antenna) gravitational wave observatory. Unless something can be done to distinguish between a stochastic background and detector noise, the two will combine to form an effective noise floor for the detector. Two methods have been proposed to solve this problem. The first is to cross-correlate the output of two independent interferometers. The second is an ingenious scheme for monitoring the instrument noise by operatin…
The gravitational wave (GW) has opened a new window to the universe beyond the electromagnetic spectrum. Since 2015, dozens of GW events have been caught by the ground-based GW detectors through laser interferometry. However, all the ground-based detectors are L-shaped Michelson interferometers, with very limited directional response to GW. Here we propose a three-dimensional (3-D) laser interferometer detector in the shape of a regular triangular pyramid, which has more spherically symmetric antenna pattern. Moreover, the new configuration corresponds to much stronger constraints on parameter…
We discuss exploration for isotropic gravitational wave backgrounds around 1 mHz by correlation analysis, targeting both parity odd and even polarization modes. Even though the space interferometer LISA alone cannot probe the two modes due to cancellations, the outlook is being changed drastically by the strong development of other space detectors such as Taiji. In fact, a heliocentric interferometer network holds a preferable geometrical symmetry {illuminated by a virtual sphere off-center from the Sun}. By utilizing an internal symmetry of data streams, we can optimally decompose the odd and…
We have demonstrated displacement- and frequency-noise free laser interferometry (DFI) by partially implementing a recently proposed optical configuration using bi-directional Mach-Zehnder interferometers (MZI). This partial implementation, the minimum necessary to be called DFI, has confirmed the essential feature of DFI: the combination of two MZI signals can be carried out in a way which cancels displacement noise of the mirrors while maintaining gravitational wave signals. The attained maximum displacement noise suppression allowed a simulated-SNR of 45dB.
We propose a method to probe the equation of state of the early universe and its evolution, using the stochastic gravitational wave background from inflation. A small deviation from purely radiation dominated universe ($w= 1/3$) would be clearly imprinted on the gravitational wave spectrum $Ω_{GW}(f)$ due to the nearly scale invariant nature of inflationary generated waves.
The observed microwave background anisotropies in combination with the theory of quantum mechanically generated cosmological perturbations predict a well measurable amount of relic gravitational waves in the frequency intervals tested by LISA and ground-based laser interferometers.
We report on the first demonstration of time-delay interferometry (TDI) for LISA, the Laser Interferometer Space Antenna. TDI was implemented in a laboratory experiment designed to mimic the noise couplings that will occur in LISA. TDI suppressed laser frequency noise by approximately 10^9 and clock phase noise by 6x10^4, recovering the intrinsic displacement noise floor of our laboratory test bed. This removal of laser frequency noise and clock phase noise in post-processing marks the first experimental validation of the LISA measurement scheme.
It is shown that the expected amplitudes and specific correlation properties of the relic (squeezed) gravitational wave background may allow the registration of the relic gravitational waves by the first generation of sensitive gravity-wave detectors.
We show that pairs of widely separated interferometers are advantageous for measuring the Stokes parameter V of a stochastic background of gravitational waves. This parameter characterizes asymmetry of amplitudes of right- and left-handed waves and generation of the asymmetry is closely related to parity violation in the early universe. The advantageous pairs include LIGO(Livingston)-LCGT and AIGO-Virgo that are relatively insensitive to Omega_GW (the simple intensity of the background). Using at least three detectors, information of the intensity Omega_GW and the degree of asymmetry V can be …
A MHz gravitational wave search for harmonic sources was conducted using a 704-hr dataset obtained from the Holometer, a pair of 40-meter power recycled Michelson interferometers. Our search was designed to look for cosmic string loops and eccentric black hole binaries in an entirely unexplored frequency range from 1 to 25 MHz. The measured cross-spectral density between both interferometers was used to perform four different searches. First, we search to identify any fundamental frequencies bins that have excess power above 5$σ$. Second, we reduce the per-bin threshold on any individual frequ…
We investigate the possibility of measuring the primordial gravitational wave (GW) signal across 21 decades in frequencies, using the cosmic microwave background (CMB), pulsar timing arrays (PTA), and laser and atomic interferometers. For the CMB and PTA experiments we consider the LiteBIRD mission and the Square Kilometer Array (SKA), respectively. For the interferometers we consider space mission proposals including the Laser Interferometer Space Antenna (LISA), the Big Bang Observer (BBO), the Deci-hertz Interferometer Gravitational wave Observatory (DECIGO), the $μ$Ares experiment, the Dec…
Arm-locking is a technique for stabilizing the frequency of a laser in an inter-spacecraft interferometer by using the spacecraft separation as the frequency reference. A candidate technique for future space-based gravitational wave detectors such as the Laser Interferometer Space Antenna (LISA), arm-locking has been extensive studied in this context through analytic models, time-domain simulations, and hardware-in-the-loop laboratory demonstrations. In this paper we show the Laser Ranging Interferometer instrument flying aboard the upcoming Gravity Recovery and Climate Experiment Follow-On (G…
LIGO --- The Laser Interferometer Gravitational-Wave Observatory --- is one of several large projects being undertaken in the United States, Europe and Japan to detect gravitational radiation. The novelty and precision of these instruments is such that large volumes of data will be generated in an attempt to find a small number of weak signals, which can be identified only as subtle changes in the instrument output over time. In this paper, I discuss the how the nature of the LIGO experiment determines the size of the data archive that will be produced, how the nature of the analyses that must…
Several km-scale gravitational-wave detectors have been constructed world wide. These instruments combine a number of advanced technologies to push the limits of precision length measurement. The core devices are laser interferometers of a new kind; developed from the classical Michelson topology these interferometers integrate additional optical elements, which significantly change the properties of the optical system. Much of the design and analysis of these laser interferometers can be performed using well-known classical optical techniques; however, the complex optical layouts provide a ne…
We analyze the radiation pressure induced interaction of mirror motion and light fields in Michelson-type interferometers used for the detection of gravitational waves and for fundamental research in table-top quantum optomechanical experiments, focusing on the asymmetric regime with a (slightly) unbalanced beamsplitter and a (small) offset from the dark port. This regime, as it was shown recently, provides new interesting features, in particular a stable optical spring and optical cooling on cavity resonance. We show that generally the nature of optomechanical coupling in Michelson-type inter…
In the gravitational sector, we study the CPT violation and birefringence of gravitational waves. In presence of the CPT violation, a relative dephasing is generated between two circular polarization states of gravitational waves. This effect induces the birefringence of gravitational waves. We predict the gravitational waveform corrected by it and estimate the expected constraints on it from Advanced Laser Interferometer Gravitational-Wave Observatory, Einstein Telescope and Laser Interferometer Space Antenna.
We use recent population synthesis results to investigate the distribution of pulsars in the frequency space, having a gravitational strain high enough to be detected by the future generations of laser beam interferometers. We find that until detectors become able to recover the entire population, the frequency distribution of the 'detectable' population will be very dependent on the detector noise curve. Assuming a mean equatorial deformation $ε=10^{-6}$, the optimal frequency is around 450 Hz for interferometers of the first generation (LIGO or VIRGO) and shifts toward 85 Hz for advanced det…
LIGO's detection of gravitational waves marks a first step in measurable effects of general relativity on quantum matter. In its current operation, laser interferometer gravitational-wave detectors are already quantum limited at high frequencies, and planned upgrades aim to decrease the noise floor to the quantum level over a wider bandwidth. This raises the interesting idea of what a gravitational-wave detector, or an optomechanical system more generally, may reveal about gravity beyond detecting gravitational waves from highly energetic astrophysical events, such as its quantum versus classi…
It may be possible to construct a laser interferometer gravitational wave antenna in space with $h_{rms}\sim 10^{-23}$ at $ f\sim 0.1{\rm Hz}$ in $\sim 2020$. This deci hertz antenna may be called DECIGO/BBO,which stand for DECi hertz Interferometer Gravitational wave Observatory and Big Bang Observer, respectively. The analysis of 1-10 years observational data of the coalescing binary neutron stars or black holes at the distance of $\sim$ 300Mpc will give us the spatial position within $\sim$ an arc minute and the time of the coalescence within $\sim 0.1$ sec beforehand. With the knowledge of…
It may be possible to construct a laser interferometer gravitational wave antenna in space with $h_{rms}\sim 10^{-27}$ at $ f\sim 0.1{\rm Hz}$ in this century. We show possible specification of this antenna which we call DECIGO. Using this antenna we show that 1) typically $ 10^5$ ($10^4\sim 10^6$) chirp signals of coalescing binary neutron stars per year may be detected with S/N $\sim 10^4$. 2) We can directly measure the acceleration of the universe by ten years observation of binary neutron stars. 3) The stochastic gravitational waves of $Ω_{GW}\gsim 10^{-20}$ predicted by the inflation may…
In a general metric theory of gravitation in four dimensions, six polarizations of a gravitational wave are allowed: two scalar and two vector modes, in addition to two tensor modes in general relativity. Such additional polarization modes appear due to additional degrees of freedom in modified theories of gravitation or theories with extra dimensions. Thus, observations of gravitational waves can be utilized to constrain the extended models of gravitation. In this paper, we investigate detectability of additional polarization modes of gravitational waves, particularly focusing on a stochastic…
We demonstrate a method to fully characterize mass-transferring double white dwarf (DWD) systems with a helium-rich (He) WD donor based on the mass--radius relationship for He WDs. Using a simulated Galactic population of DWDs, we show that donor and accretor masses can be inferred for up to $\sim\, 60$ systems observed by both Laser Interferometer Space Antenna (LISA) and Gaia. Half of these systems will have mass constraints $Δ\,M_{\rm{D}}\lesssim0.2M_{\odot}$ and $Δ\,M_{\rm{A}}\lesssim2.3\,M_{\odot}$. We also show how the orbital frequency evolution due to astrophysical processes and gravit…
We consider the implications for laser interferometry of the quantum-gravity-motivated modifications in the laws of particle propagation, which are presently being considered in attempts to explain puzzling observations of ultra-high-energy cosmic rays. We show that there are interferometric setups in which the Planck-scale effect on propagation leads to a characteristic signature. A naive estimate is encouraging with respect to the possibility of achieving Planck-scale sensitivity, but we also point out some severe technological challenges which would have to be overcome in order to achieve t…
