We present a novel numerical method to solve the incompressible Navier-Stokes equations for two-phase flows with phase change, using a one-fluid approach. Separate phases are tracked using a geometric Volume-Of-Fluid (VOF) method with piecewise linear interface construction (PLIC). Thermal energy advection is treated in conservative form and the geometric calculation of VOF fluxes at computational cell boundaries is used consistently to calculate the fluxes of heat capacity. The phase boundary is treated as sharp (infinitely thin), which leads to a discontinuity in the velocity field across the interface in the presence of phase change. The numerical difficulty of this jump is accommodated with the introduction of a novel two-step VOF advection scheme. The method has been implemented in the open source code PARIS and is validated using well-known test cases. These include an evaporating circular droplet in microgravity (2D), the Stefan problem and a 3D bubble in superheated liquid. The accuracy shown in the results were encouraging. The 2D evaporating droplet showed excellent prediction of the droplet volume evolution as well as preservation of its circular shape. A relative error of less than 1% was achieved for the Stefan problem case, using water properties at atmospheric conditions. For the final radius of the bubble in superheated liquid at a Jacob number of 0.5, a relative error of less than 6% was obtained on the coarsest grid, with less than 1% on the finest.
Volume of fluid(VOF) method is a sharp interface method employed for simulations of two phase flows. Interface in VOF is usually represented using piecewise linear line segments in each computational grid based on the volume fraction field. While VOF for cartesian coordinates conserve mass exactly, existing algorithms do not show machine-precision mass conservation for axisymmetric coordinate systems. In this work, we propose analytic formulae for interface reconstruction in axisymmetric coordinates, similar to those proposed by Scardovelli and Zaleski (J. Comput. Phys. 2000) for cartesian coo…
In this paper, we propose a simple and accurate numerical method for capturing moving interfaces on fixed Eulerian grids by coupling the Tangent of Hyperbola Interface Capturing (THINC) method and Level Set (LS) method. The innovative and practically-significant aspects of the proposed method, so-called THINC/LS method, lie in (1) representing the interface with polynomial of arbitrary-order rather than the plane representation commonly used in the Piecewise Linear Interface Calculation (PLIC) Volume of fluid (VOF) methods, (2) conserving rigorously the mass of the transported VOF field, and (…
We revisit simple algebraic VOF methods for advection of material interfaces based of the well established TVD paradigm. We show that greatly improved representation of contact discontinuities is obtained through use of a novel CFL-dependent limiter whereby the classical TVD bounds are exceeded. Perfectly crisp numerical interfaces are obtained with very limited numerical atomization (flotsam and jetsam) as compared to previous SLIC schemes. Comparison of the algorithm with accurate geometrical VOF shows larger error at given mesh resolution, but comparable efficiency when the reduced computat…
The moment-of-fluid method (MOF) is known as an extension of the volume-of-fluid method with piecewise linear interface construction (VOF-PLIC). In this study, several directional splitting advection algorithms are extended from the VOF-PLIC method to the MOF method. Those methods, along with some existing directional splitting algorithms, are presented in detail, especially on the geometrical and non-geometrical nature of the advection algorithm. Besides, we also proposed a simple and efficient analytic form to calculate the volume and centroid of the intersection polyhedron in 3D. Several nu…
The gVOF package includes a complete and self-contained set of routines for volume of fluid initialization, interface reconstruction and fluid advection, which are used to implement several accurate and efficient geometric volume of fluid (VOF) methods on arbitrary grids, either structured or unstructured with convex or non-convex cells, based on multidimensional unsplit advection and piecewise linear interface calculation (PLIC) schemes. The package uses the non-convex analytical and geometrical tools developed by López et al. [J. Comput. Phys. 392 (2019) 666-693] and the isosurface extractio…
To predict liquid-gas two-phase flow phenomena, accurate tracking and prediction of the evolving liquid-gas interface is required. Volume-of-Fluid or VoF method has been used in the literature for computationally modeling of such flows. In the VoF method, a single set of governing equations are solved for both phases along with an advection equation for the volume fraction. The properties in each computational cell are determined by a linear weighted average of the properties of the two fluids based on the phase fraction. While the method predicts water-air flows well, the predictions tend to …
Semi-Lagrangian schemes have proven to be very efficient to model advection problems. However most semi-Lagrangian schemes are not conservative. Here, a systematic method is introduced in order to enforce the conservative property on a semi-Lagrangian advection scheme. This method is shown to generate conservative schemes with the same linear stability range and the same order of accuracy as the initial advection scheme from which they are derived. We used a criterion based on the column-balance property of the schemes to assess their conservativity property. We show that this approach can be …
This paper proposes a comparison of four popular interface capturing methods : the volume of fluid (VOF), the standard level set (SLS), the accurate conservative level set (ACLS) and the coupled level set and volume of fluid (CLSVOF). All methods are embedded into a unified low-Mach framework based on a Cartesian-grid finite-volume discretization. This framework includes a sharp transport of the interface, a wellbalanced surface tension discretization and a consistent mass and momentum transport which allows capillary-driven simulations with high density ratio. The comparison relies on shared …
A wide variety of interface capturing methods have been introduced for simulating two-phase flows throughout the years. However, there is a noticeable dearth of literature focusing on objective comparisons between these methods, especially when they are coupled to the momentum equation and applied in physically relevant regimes. In this article, we compare two techniques for simulating two-phase flows that possess attractive qualities, but belong to the two distinct classes of diffuse interface (DI) and volume of fluid (VOF) methods. Both of these methods allow for mass-conserving schemes that…
We extend the positivity-preserving method of Zhang & Shu (2010, JCP, 229, 3091-3120) to simulate the advection of neutral particles in phase space using curvilinear coordinates. The ability to utilize these coordinates is important for non-equilibrium transport problems in general relativity and also in science and engineering applications with specific geometries. The method achieves high-order accuracy using Discontinuous Galerkin (DG) discretization of phase space and strong stability-preserving, Runge-Kutta (SSP-RK) time integration. Special care in taken to ensure that the method preserv…
Central finite difference schemes have long been avoided in the context of two-phase flows for the advection of the phase indicator function due to numerical overshoots and undershoots associated with their dispersion errors. We will show however, for an incompressible flow, in the context of a specific diffuse interface model, one can maintain the boundedness of the phase field while also taking advantage of the low cost and ease of implementation of central differences to construct a non-dissipative discretization scheme for the advective terms. This is made possible by combining the advecti…
In order to prevent velocity, pressure, and temperature spikes at material discontinuities occurring when the interface-capturing schemes inconsistently simulate compressible multi-material flows(when the specific heats ratio is variable),various non-conservative or quasi-conservative numerical models have been proposed. However, designing a consistent numerical algorithm, especially using the high-order characteristic flux-split based finite-difference method (CFS-FDM) is still an open question. In this study, a systematical analysis of previous algorithms of the consistent implementing the h…
This paper presents a simple and highly accurate method for capturing sharp interfaces moving in divergence-free velocity fields using the high-order Flux Reconstruction approach on unstructured grids. A well-known limitation of high-order methods is their susceptibility to the Gibbs phenomenon; the appearance of spurious oscillations in the vicinity of discontinuities and steep gradients makes it difficult to accurately resolve shocks or sharp interfaces. In order to address this issue in the context of sharp interface capturing, a novel, preconditioned and localized phase field method is dev…
In this work, we propose a novel phase-field model for the simulation of two-phase flows that is accurate, conservative, bounded, and robust. The proposed model conserves the mass of each of the phases, and results in bounded transport of the volume fraction. We present results from the canonical test cases of a drop advection and a drop in a shear flow, showing significant improvement in the accuracy over the commonly used conservative phase-field method. Moreover, the proposed model imposes a lesser restrictive Courant-Friedrichs-Lewy condition, and hence, is less expensive compared to other…
The moment-of-fluid (MOF) method is an extension of the volume-of-fluid method with piecewise linear interface construction (VOF-PLIC). By minimizing the least square error of the centroid of the cutting polyhedron, the MOF method reconstructs the linear interface without using any neighboring information. Traditional MOF involves iteration while finding the optimized linear reconstruction. Here, we propose an alternative approach based on a machine learning algorithm: Decision Tree algorithm. A training data set is generated from a list of random cuts of a unit cube by plane. The Decision Tre…
In this paper, a methodology for modelling two-phase flows based on a conservative level set method in the framework of finite volume method is presented. The novelty of the interface capturing method used here lies on the advection of level set which is solved with a WENO scheme and is corrected with a novel re-initialisation method for retaining its signed distance function character. The coupling with the volume of fluid method is done with a simple algebraic approach and with the new algorithm the accumulated mass conservation errors remain reasonably low. The paper presents a unique coupl…
We propose a novel method for the direct numerical simulation of interfacial flows involving large density contrasts, using a Volume-of-Fluid method. We employ the conservative formulation of the incompressible Navier-Stokes equations for immiscible fluids in order to ensure consistency between the discrete transport of mass and momentum in both fluids. This strategy is implemented on a uniform 3D Cartesian grid with a staggered configuration of primitive variables, wherein a geometrical reconstruction based mass advection is carried out on a grid twice as fine as that for the momentum. The im…
Pure advection of a conservative scalar is relevant to several applications including two-phase flow. Successful numerical schemes must capture the sharp interface between the phases while maintaining a smooth (wrinkle-free) interfacial contour. Among other methods, algebraic schemes that are based on the addition of an extra artificial interface compression term to the scalar transport equation have gained recent popularity (e.g., OpenFOAM; porous media). While the approach offers unique flexibilities in spatiotemporal discretizations, common numerical treatments result in the wrinkling of th…
A conservative Godunov-type mesh-free hydrodynamics scheme for weakly compressible multiphase flows
Technical University of Munich (TUM)（慕尼黑工业大学）；Munich Institute of Integrated Materials, Energy and Process Engineering (MEP), Technical University of Munich (TUM)（慕尼黑工业大学集成材料、能源和工艺工程研究所）
The micro-macro (mM) decomposition approach is considered for the numerical solution of the Vlasov--Poisson--Lenard--Bernstein (VPLB) system, which is relevant for plasma physics applications. In the mM approach, the kinetic distribution function is decomposed as $f=\mathcal{E}[\boldsymbolρ_{f}]+g$, where $\mathcal{E}$ is a local equilibrium distribution, depending on the macroscopic moments $\boldsymbolρ_{f}=\int_{\mathbb{R}}\boldsymbol{e} fdv=\langle\boldsymbol{e} f\rangle_{\mathbb{R}}$, where $\boldsymbol{e}=(1,v,\frac{1}{2}v^{2})^{\rm{T}}$, and $g$, the microscopic distribution, is defined…
This work describes three diffuse-interface methods for the simulation of immiscible, compressible multiphase fluid flows and elastic-plastic deformation in solids. The first method is the localized-artificial-diffusivity approach of Cook (2007), Subramaniam et al., (2018), and Adler and Lele (2019), in which artificial diffusion terms are added to the conservation equations. The second method is the gradient-form approach that is based on the quasi-conservative method of Shukla et al., (2010) and Tiwari et al., (2013), in which the diffusion and sharpening terms (together called regularizatio…
We compare the performance of energy-based and entropy-conserving schemes for modeling nonthermal energy components, such as unresolved turbulence and cosmic rays, using idealized fluid dynamics tests and isolated galaxy simulations. While both methods are aimed to model advection and adiabatic compression or expansion of different energy components, the energy-based scheme numerically solves the nonconservative equation for the energy density evolution, while the entropy-conserving scheme uses a conservative equation for modified entropy. Using the standard shock tube and Zel'dovich pancake t…
Second-order phase field models have emerged as an attractive option for capturing the advection of interfaces in two-phase flows. Prior to these, state-of-the-art models based on the Cahn-Hilliard equation, which is a fourth-order equation, allowed for the derivation of surface tension models through thermodynamic arguments. In contrast, the second-order phase field models do not follow a known energy law, and deriving a surface tension term for these models using thermodynamic arguments is not straightforward. In this work, we justify that the energy-based surface tension model from the Cahn…
