Localization and Mapping is an essential component to enable Autonomous Vehicles navigation, and requires an accuracy exceeding that of commercial GPS-based systems. Current odometry and mapping algorithms are able to provide this accurate information. However, the lack of robustness of these algorithms against dynamic obstacles and environmental changes, even for short time periods, forces the generation of new maps on every session without taking advantage of previously obtained ones. In this paper we propose the use of a deep learning architecture to segment movable objects from 3D LiDAR point clouds in order to obtain longer-lasting 3D maps. This will in turn allow for better, faster and more accurate re-localization and trajectoy estimation on subsequent days. We show the effectiveness of our approach in a very dynamic and cluttered scenario, a supermarket parking lot. For that, we record several sequences on different days and compare localization errors with and without our movable objects segmentation method. Results show that we are able to accurately re-locate over a filtered map, consistently reducing trajectory errors between an average of 35.1% with respect to a non-filtered map version and of 47.9% with respect to a standalone map created on the current session.
CCTNet: A Circular Convolutional Transformer Network for LiDAR-based Place Recognition Handling Movable Objects Occlusion
College of Computer Science and Technology, Jilin University（吉林大学计算机科学与技术学院）；China North Vehicle Research Institute (NOVERI)（中国北方车辆研究所）；Centre for Composite Materials and Structures, Harbin Institute of Technology（哈尔滨工业大学复合材料与结构中心）；Faculty of Computing, Harbin Institute of Technology（哈尔滨工业大学计算学部）；National Key Laboratory of Science and Technology on Advanced Composites in Special Environments, Harbin Institute of Technology（特殊环境先进复合材料科学与技术国家重点实验室）
Università degli Studi di Milano - Bicocca（米兰比可卡大学）；University of Freiburg（弗莱堡大学）；Universidad de Alcalá（阿尔卡拉大学）
Global localization is an important and widely studied problem for many robotic applications. Place recognition approaches can be exploited to solve this task, e.g., in the autonomous driving field. While most vision-based approaches match an image w.r.t. an image database, global visual localization within LiDAR-maps remains fairly unexplored, even though the path toward high definition 3D maps, produced mainly from LiDARs, is clear. In this work we leverage Deep Neural Network (DNN) approaches to create a shared embedding space between images and LiDAR-maps, allowing for image to 3D-LiDAR pl…
In this work, we present a detailed comparison of ten different 3D LiDAR sensors, covering a range of manufacturers, models, and laser configurations, for the tasks of mapping and vehicle localization, using as common reference the Normal Distributions Transform (NDT) algorithm implemented in the self-driving open source platform Autoware. LiDAR data used in this study is a subset of our LiDAR Benchmarking and Reference (LIBRE) dataset, captured independently from each sensor, from a vehicle driven on public urban roads multiple times, at different times of the day. In this study, we analyze t…
Shenzhen Institutes of Advanced Technology, Chinese Academy of Sciences（中国科学院深圳先进技术研究院）；University of Chinese Academy of Sciences（中国科学院大学）；University of Macau（澳门大学）
In complex environments, low-cost and robust localization is a challenging problem. For example, in a GPSdenied environment, LiDAR can provide accurate position information, but the cost is high. In general, visual SLAM based localization methods become unreliable when the sunlight changes greatly. Therefore, inexpensive and reliable methods are required. In this paper, we propose a stereo visual localization method based on the prior LiDAR map. Different from the conventional visual localization system, we design a novel visual optimization model by matching planar information between the LiD…
As the autonomous driving industry is slowly maturing, visual map localization is quickly becoming the standard approach to localize cars as accurately as possible. Owing to the rich data returned by visual sensors such as cameras or LiDARs, researchers are able to build different types of maps with various levels of details, and use them to achieve high levels of vehicle localization accuracy and stability in urban environments. Contrary to the popular SLAM approaches, visual map localization relies on pre-built maps, and is focused solely on improving the localization accuracy by avoiding er…
Compared to LiDAR-based localization methods, which provide high accuracy but rely on expensive sensors, visual localization approaches only require a camera and thus are more cost-effective while their accuracy and reliability typically is inferior to LiDAR-based methods. In this work, we propose a vision-based localization approach that learns from LiDAR-based localization methods by using their output as training data, thus combining a cheap, passive sensor with an accuracy that is on-par with LiDAR-based localization. The approach consists of two deep networks trained on visual odometry an…
ETH Zürich（苏黎世联邦理工学院）；University of Freiburg（弗莱堡大学）；KU Leuven（荷语鲁汶大学）；MPI for Informatics（马克斯·普朗克信息学研究所）
Existing learning methods for LiDAR-based applications use 3D points scanned under a pre-determined beam configuration, e.g., the elevation angles of beams are often evenly distributed. Those fixed configurations are task-agnostic, so simply using them can lead to sub-optimal performance. In this work, we take a new route to learn to optimize the LiDAR beam configuration for a given application. Specifically, we propose a reinforcement learning-based learning-to-optimize (RL-L2O) framework to automatically optimize the beam configuration in an end-to-end manner for different LiDAR-based applic…
PRISM-Loc: a Lightweight Long-range LiDAR Localization in Urban Environments with Topological Maps
Federal Research Center for Computer Science and Control of Russian Academy of Sciences（俄罗斯科学院计算机科学与控制联邦研究中心）；Moscow Institute of Physics and Technology (MIPT)（莫斯科物理技术学院）；Artificial Intelligence Research Institute (AIRI)（人工智能研究所）；Innopolis University（Innopolis大学）
School of Intelligence Science and Technology（智能科学与技术学院）
The ability for a moving agent to localize itself in environment is the basic demand for emerging applications, such as autonomous driving, etc. Many existing methods based on multiple sensors still suffer from drift. We propose a scheme that fuses map prior and vanishing points from images, which can establish an energy term that is only constrained on rotation, called the direction projection error. Then we embed these direction priors into a visual-LiDAR SLAM system that integrates camera and LiDAR measurements in a tightly-coupled way at backend. Specifically, our method generates visual r…
Karlsruhe Institute of Technology（卡尔斯鲁厄理工学院）；The University of Tokyo（东京大学）；Line Corporation（Line公司）
Estimating the pose of an unmanned aerial vehicle (UAV) or drone is a challenging task. It is useful for many applications such as navigation, surveillance, tracking objects on the ground, and 3D reconstruction. In this work, we present a LiDAR-camera-based relative pose estimation method between a drone and a ground vehicle, using a LiDAR sensor and a fisheye camera on the vehicle's roof and another fisheye camera mounted under the drone. The LiDAR sensor directly observes the drone and measures its position, and the two cameras estimate the relative orientation using indirect observation of …
The LiDAR and inertial sensors based localization and mapping are of great significance for Unmanned Ground Vehicle related applications. In this work, we have developed an improved LiDAR-inertial localization and mapping system for unmanned ground vehicles, which is appropriate for versatile search and rescue applications. Compared with existing LiDAR-based localization and mapping systems such as LOAM, we have two major contributions: the first is the improvement of the robustness of particle swarm filter-based LiDAR SLAM, while the second is the loop closure methods developed for global opt…
MTA SZTAKI, Hungarian Academy of Sciences, Institute for Computer Science and Control（匈牙利科学院计算机科学与控制研究所）
In this paper we deal with the problem of odometry and localization for Lidar-equipped vehicles driving in urban environments, where a premade target map exists to localize against. In our problem formulation, to correct the accumulated drift of the Lidar-only odometry we apply a place recognition method to detect geometrically similar locations between the online 3D point cloud and the a priori offline map. In the proposed system, we integrate a state-of-the-art Lidar-only odometry algorithm with a recently proposed 3D point segment matching method by complementing their advantages. Also, we …
Robotics Institute, Carnegie Mellon University（卡内基梅隆大学机器人研究所）
Simultaneous Localization and Mapping (SLAM) is a fundamental task to mobile and aerial robotics. LiDAR based systems have proven to be superior compared to vision based systems due to its accuracy and robustness. In spite of its superiority, pure LiDAR based systems fail in certain degenerate cases like traveling through a tunnel. We propose Stereo Visual Inertial LiDAR (VIL) SLAM that performs better on these degenerate cases and has comparable performance on all other cases. VIL-SLAM accomplishes this by incorporating tightly-coupled stereo visual inertial odometry (VIO) with LiDAR mapping …
Aalto University（阿尔托大学）；University of Bonn（波恩大学）；University of Oxford（牛津大学）
Robust and accurate localization is a basic requirement for mobile autonomous systems. Pole-like objects, such as traffic signs, poles, and lamps are frequently used landmarks for localization in urban environments due to their local distinctiveness and long-term stability. In this paper, we present a novel, accurate, and fast pole extraction approach based on geometric features that runs online and has little computational demands. Our method performs all computations directly on range images generated from 3D LiDAR scans, which avoids processing 3D point clouds explicitly and enables fast po…
Shanghai Jiao Tong University（上海交通大学）；Institute of Medical Robotics（医疗机器人研究院）
Long-term scene changes present challenges to localization systems using a pre-built map. This paper presents a LiDAR-based system that can provide robust localization against those challenges. Our method starts with activation of a mapping process temporarily when global matching towards the pre-built map is unreliable. The temporary map will be merged onto the pre-built map for later localization runs once reliable matching is obtained again. We further integrate a LiDAR inertial odometry (LIO) to provide motion-compensated LiDAR scans and a reliable initial pose guess for the global matchin…
University of Toronto Institute for Aerospace Studies（多伦多大学航空航天研究所）；Apple Inc.（苹果公司）
We present a self-supervised learning approach for the semantic segmentation of lidar frames. Our method is used to train a deep point cloud segmentation architecture without any human annotation. The annotation process is automated with the combination of simultaneous localization and mapping (SLAM) and ray-tracing algorithms. By performing multiple navigation sessions in the same environment, we are able to identify permanent structures, such as walls, and disentangle short-term and long-term movable objects, such as people and tables, respectively. New sessions can then be performed using a…
LiDAR is playing a more and more essential role in autonomous driving vehicles for objection detection, self localization and mapping. A single LiDAR frequently suffers from hardware failure (e.g., temporary loss of connection) due to the harsh vehicle environment (e.g., temperature, vibration, etc.), or performance degradation due to the lack of sufficient geometry features, especially for solid-state LiDARs with small field of view (FoV). To improve the system robustness and performance in self-localization and mapping, we develop a decentralized framework for simultaneous calibration, local…
Towards Robust LiDAR Localization: Deep Learning-based Uncertainty Estimation
Department of Computer Engineering, Amirkabir University of Technology（阿姆irkabir技术大学计算机工程系）；Graduate School of Information Science and Technology, The University of Tokyo（东京大学信息科学与技术研究生院）
Boosting LiDAR-Based Localization with Semantic Insight: Camera Projection versus Direct LiDAR Segmentation
Department of Technical Cognitive Systems, FZI Research Center for Information Technology（技术认知系统部门，信息技术研究所以暨创新中心）；Karlsruhe Institute of Technology (KIT)（卡尔斯鲁厄大学）
LiDAR-based localization and mapping is one of the core components in many modern robotic systems due to the direct integration of range and geometry, allowing for precise motion estimation and generation of high quality maps in real-time. Yet, as a consequence of insufficient environmental constraints present in the scene, this dependence on geometry can result in localization failure, happening in self-symmetric surroundings such as tunnels. This work addresses precisely this issue by proposing a neural network-based estimation approach for detecting (non-)localizability during robot operati…
Multi-LiDAR Localization and Mapping Pipeline for Urban Autonomous Driving
Institute of Automotive Technology, Munich Institute of Robotics and Machine Intelligence (MIRMI), Technical University of Munich（慕尼黑工业大学汽车技术研究所，慕尼黑机器人与机器智能研究所）；Professorship Autonomous Vehicle Systems, Munich Institute of Robotics and Machine Intelligence (MIRMI), Technical University of Munich（慕尼黑工业大学自动驾驶车辆系统教授席，慕尼黑机器人与机器智能研究所）
Pose estimation is a fundamental building block for robotic applications such as autonomous vehicles, UAV, and large scale augmented reality. It is also a prohibitive factor for those applications to be in mass production, since the state-of-the-art, centimeter-level pose estimation often requires long mapping procedures and expensive localization sensors, e.g. LiDAR and high precision GPS/IMU, etc. To overcome the cost barrier, we propose a neural network based solution to localize a consumer degree RGB camera within a prior sparse LiDAR map with comparable centimeter-level precision. We achi…
The LIght Detection And Ranging (LiDAR) sensor has become one of the most important perceptual devices due to its important role in simultaneous localization and mapping (SLAM). Existing SLAM methods are mainly developed for mechanical LiDAR sensors, which are often adopted by large scale robots. Recently, the solid-state LiDAR is introduced and becomes popular since it provides a cost-effective and lightweight solution for small scale robots. Compared to mechanical LiDAR, solid-state LiDAR sensors have higher update frequency and angular resolution, but also have smaller field of view (FoV), …
A Survey on Global LiDAR Localization: Challenges, Advances and Open Problems
Hong Kong University of Science and Technology（香港科技大学）；Zhejiang University（浙江大学）；National University of Defense Technology（国防科技大学）；University of Bonn（波恩大学）
TreeLoc: 6-DoF LiDAR Global Localization in Forests via Inter-Tree Geometric Matching
Dept. of Mechanical Engineering, SNU（机械工程系，首尔国立大学）；Oxford Robotics Institute, University of Oxford（牛津大学机器人研究所）；CSIRO Robotics, DATA61, CSIRO and the School of Electrical Engineering and Computer Science, The University of Queensland (UQ)（CSIRO机器人、DATA61、CSIRO及昆士兰大学电气工程与计算机科学学院）
Localization is an essential technique in mobile robotics. In a complex environment, it is necessary to fuse different localization modules to obtain more robust results, in which the error model plays a paramount role. However, exteroceptive sensor-based odometries (ESOs), such as LiDAR/visual odometry, often deliver results with scene-related error, which is difficult to model accurately. To address this problem, this research designs a scene-aware error model for ESO, based on which a multimodal localization fusion framework is developed. In addition, an end-to-end learning method is propos…
LEAR: Learning Edge-Aware Representations for Event-to-LiDAR Localization
Institute of Visual Computing, Graz University of Technology（视觉计算研究所，技术大学格拉茨）；School of Artificial Intelligence and Robotics, Hunan University（人工智能与机器人学院，湖南大学）
Light-weight camera localization in existing maps is essential for vision-based navigation. Currently, visual and visual-inertial odometry (VO\&VIO) techniques are well-developed for state estimation but with inevitable accumulated drifts and pose jumps upon loop closure. To overcome these problems, we propose an efficient monocular camera localization method in prior LiDAR maps using direct 2D-3D line correspondences. To handle the appearance differences and modality gaps between LiDAR point clouds and images, geometric 3D lines are extracted offline from LiDAR maps while robust 2D lines are …
Lidar technology has evolved significantly over the last decade, with higher resolution, better accuracy, and lower cost devices available today. In addition, new scanning modalities and novel sensor technologies have emerged in recent years. Public datasets have enabled benchmarking of algorithms and have set standards for the cutting edge technology. However, existing datasets are not representative of the technological landscape, with only a reduced number of lidars available. This inherently limits the development and comparison of general-purpose algorithms in the evolving landscape. This…
Reliable-loc: Robust sequential LiDAR global localization in large-scale street scenes based on verifiable cues
State Key Laboratory of Information Engineering in Surveying, Mapping and Remote Sensing, Wuhan University（武汉大学测绘遥感信息工程国家重点实验室）；School of Electrical and Electronic Engineering, Nanyang Technological University（南洋理工大学电气与电子工程学院）；School of Earth Sciences and Engineering, Hohai University（河海大学地球科学与工程学院）；Hubei Luojia Laboratory（湖北珞珈实验室）
Skolkovo Institute of Science and Technology（斯科尔科沃科学技术研究院）
In this study, we propose a novel visual localization approach to accurately estimate six degrees of freedom (6-DoF) poses of the robot within the 3D LiDAR map based on visual data from an RGB camera. The 3D map is obtained utilizing an advanced LiDAR-based simultaneous localization and mapping (SLAM) algorithm capable of collecting a precise sparse map. The features extracted from the camera images are compared with the points of the 3D map, and then the geometric optimization problem is being solved to achieve precise visual localization. Our approach allows employing a scout robot equipped …
RELEAD: Resilient Localization with Enhanced LiDAR Odometry in Adverse Environments
School of Systems Science and Engineering, Sun Yat-sen University（中山大学系统科学与工程学院）；Hong Kong University of Science and Technology（香港科技大学）；Hong Kong Polytechnic University（香港理工大学）
This paper deals with the development of a localization methodology for autonomous vehicles using only a $3\Dim$ LIDAR sensor. In the context of this paper, localizing a vehicle in a known 3D global map of the environment is essentially to find its global $3\Dim$ pose (position and orientation) within this map. The problem of tracking is then to use sequential LIDAR scan measurement to also estimate other states such as velocity and angular rates, in addition to the global pose of the vehicle. Particle filters are often used in localization and tracking, as in applications of simultaneously lo…
Dahlem Center for Machine Learning and Robotics (DCMLR), Department of Mathematics and Computer Science, Freie Universität Berlin（达赫姆机器学习与机器人研究中心（DCMLR），数学与计算机科学系，柏林自由大学）
Hong Kong University of Science and Technology（香港科技大学）
Moving objects can greatly jeopardize the performance of a visual simultaneous localization and mapping (vSLAM) system which relies on the static-world assumption. Motion removal have seen successful on solving this problem. Two main streams of solutions are based on either geometry constraints or deep semantic segmentation neural network. The former rely on static majority assumption, and the latter require labor-intensive pixel-wise annotations. In this paper we propose to adopt a novel weakly-supervised semantic segmentation method. The segmentation mask is obtained from a CNN pre-trained w…
Simultaneous localization and mapping (SLAM) has been a hot research field in the past years. Against the backdrop of more affordable 3D LiDAR sensors, research on 3D LiDAR SLAM is becoming increasingly popular. Furthermore, the re-localization problem with a point cloud map is the foundation for other SLAM applications. In this paper, a template matching framework is proposed to re-localize a robot globally in a 3D LiDAR map. This presents two main challenges. First, most global descriptors for point cloud can only be used for place detection under a small local area. Therefore, in order to r…
University of California Los Angeles（加州大学洛杉矶分校）；NASA Jet Propulsion Laboratory, California Institute of Technology（加州理工学院 NASA 喷气推进实验室）
Field robotics in perceptually-challenging environments require fast and accurate state estimation, but modern LiDAR sensors quickly overwhelm current odometry algorithms. To this end, this paper presents a lightweight frontend LiDAR odometry solution with consistent and accurate localization for computationally-limited robotic platforms. Our Direct LiDAR Odometry (DLO) method includes several key algorithmic innovations which prioritize computational efficiency and enables the use of dense, minimally-preprocessed point clouds to provide accurate pose estimates in real-time. This is achieved t…
Nanyang Technological University（南洋理工大学）；Institute for Infocomm Research, A-STAR（新加坡科技研究局资讯通信研究院）
Localization can be achieved by different sensors and techniques such as a global positioning system (GPS), wifi, ultrasonic sensors, and cameras. In this paper, we focus on the laser-based localization method for unmanned aerial vehicle (UAV) applications in a GPS denied environment such as a deep tunnel system. Other than a low-cost 2D LiDAR for the planar axes, a single axis Lidar for the vertical axis as well as an inertial measurement unit (IMU) device is used to increase the reliability and accuracy of the localization performance. We present a comparative analysis of the three selected …
EKF-Based Fusion of Wi-Fi/LiDAR/IMU for Indoor Localization and Navigation
School of Advanced Technology, Xi'an Jiaotong-Liverpool University（西安交通大学利物浦大学先进技术学院）；Department of Electrical Engineering and Electronics, University of Liverpool（利物浦大学电子工程系）；Zhejiang University of Technology（浙江工业大学）；School of Artificial Intelligence, Suzhou Vocational Institute of Industrial Technology（苏州工业职业技术学院人工智能学院）
End-to-end 2D-3D Registration between Image and LiDAR Point Cloud for Vehicle Localization
Department of Engineering, University of Cambridge（剑桥大学工程系）；School of Automation and Intelligent Sensing, Shanghai Jiao Tong University（上海交通大学自动化与智能感知学院）；Department of Computer Science and Artificial Intelligence, University of Technology Nuremberg（不莱梅技术大学计算机科学与人工智能系）
Semantic grids can be useful representations of the scene around an autonomous system. By having information about the layout of the space around itself, a robot can leverage this type of representation for crucial tasks such as navigation or tracking. By fusing information from multiple sensors, robustness can be increased and the computational load for the task can be lowered, achieving real time performance. Our multi-scale LiDAR-Aided Perspective Transform network uses information available in point clouds to guide the projection of image features to a top-view representation, resulting in…
MDF: Multi-Modal Data Fusion with CNN-Based Object Detection for Enhanced Indoor Localization Using LiDAR-SLAM
Department of Artificial Intelligence Convergence, Pukyong National University（人工智能融合系，浦项国立大学）；School of Computer Science, University of Nottingham Ningbo China（计算机科学学院，诺丁汉国际大学）
