arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 1909.00567physics.ins-det
收藏

连续式核退磁制冷机用紧凑型屏蔽超导磁体的性能

Performances of a Compact Shielded Superconducting Magnet for Continuous Nuclear Demagnetization Refrigerator

Shohei Takimoto, Ryo Toda, Satoshi Murakawa, Hiroshi Fukuyama

摘要:

我们已经成功地开发和测试了一个紧凑的屏蔽超导(SSC)磁铁与FeCoV磁屏蔽。这是为基于PrNi $_5$的核退磁制冷机开发的,该制冷机可以连续保持温度低于1 mK(CNDR)[Toda $\it{et~al}$ .,J.物理学:Conf. Ser. $\bf{969}$,012093(2018)]。SSC磁体的净孔径、外径和总长度分别为22、42和169 mm,并且它在6 A的电流下产生1.38 T的最大场。为了实现紧凑和高屏蔽性能,我们仔细选择材料和优化设计的磁屏蔽场分布的数值模拟的基础上测量的磁化曲线的几个候选材料的高磁导率。我们还测量了通过在真空中扫描SSC磁体产生的热量为每场循环230 mJ。该值与根据用于缠绕磁体的超导导线的测量磁滞的估计非常一致。

英文摘要:

We have successfully developed and tested a compact shielded superconducting (SSC) magnet with a FeCoV magnetic shield. This was developed for the PrNi$_5$ based nuclear demagnetization refrigerator which can keep temperatures below 1 mK continuously (CNDR) [Toda $\it{et~al}$., J. Phys.: Conf. Ser. $\bf{969}$, 012093 (2018)]. The clear bore diameter, outer diameter, and total length of the SSC magnet are 22, 42 and 169 mm, respectively, and it produces the maximum field of 1.38 T at an electric current of 6 A. In order to realize both the compactness and the high shielding performance, we carefully chose material and optimized design of the magnetic shield by numerical simulations of the field distribution based on measured magnetization curves of several candidate materials with high permeability. We also measured a heat generated by sweeping the SSC magnet in vacuum to be 230 mJ per field cycle. This value agrees very well with an estimation from the measured magnetic hysteresis of the superconducting wire used to wind the magnet.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑