A conventional camera performs various signal processing steps sequentially to reconstruct an image from a raw Bayer image. When performing these processing in multiple stages the residual error from each stage accumulates in the image and degrades the quality of the final reconstructed image. In this paper, we present a fully convolutional neural network (CNN) to perform defect pixel correction, denoising, white balancing, exposure correction, demosaicing, color transform, and gamma encoding. To our knowledge, this is the first CNN trained end-to-end to perform the entire image signal processing pipeline in a camera. The neural network was trained using a large image database of raw Bayer images. Through extensive experiments, we show that the proposed CNN based image signal processing system performs better than the conventional signal processing pipelines that perform the processing sequentially.
Bernoulli Institute for Mathematics, Computer Science and Artificial Intelligence, University of Groningen（格罗宁根大学伯努利数学、计算机科学与人工智能研究所）；Universidad de León（莱昂大学）
One of the challenging problems in digital image forensics is the capability to identify images that are captured by the same camera device. This knowledge can help forensic experts in gathering intelligence about suspects by analyzing digital images. In this paper, we propose a two-part network to quantify the likelihood that a given pair of images have the same source camera, and we evaluated it on the benchmark Dresden data set containing 1851 images from 31 different cameras. To the best of our knowledge, we are the first ones addressing the challenge of device-based image matching. Though…
University of Southern California（南加利福尼亚大学）；Information Sciences Institute（信息科学研究所）
Hyperspectral cameras generate a large amount of data due to the presence of hundreds of spectral bands as opposed to only three channels (red, green, and blue) in traditional cameras. This requires a significant amount of data transmission between the hyperspectral image sensor and a processor used to classify/detect/track the images, frame by frame, expending high energy and causing bandwidth and security bottlenecks. To mitigate this problem, we propose a form of processing-in-pixel (PIP) that leverages advanced CMOS technologies to enable the pixel array to perform a wide range of complex …
Camera model identification (CMI) has gained significant importance in image forensics as digitally altered images are becoming increasingly commonplace. In this paper, a novel convolutional neural network (CNN) architecture is proposed for CMI with emphasis given on the preprocessing task considered to be inevitable for removing the scene content that heavily obscures the camera model fingerprints. Unlike the conventional approaches where fixed filters are used for preprocessing, the proposed remnant blocks, when coupled with a classification block and trained end-to-end minimizing the classi…
Modern digital cameras and smartphones mostly rely on image signal processing (ISP) pipelines to produce realistic colored RGB images. However, compared to DSLR cameras, low-quality images are usually obtained in many portable mobile devices with compact camera sensors due to their physical limitations. The low-quality images have multiple degradations i.e., sub-pixel shift due to camera motion, mosaick patterns due to camera color filter array, low-resolution due to smaller camera sensors, and the rest information are corrupted by the noise. Such degradations limit the performance of current …
Bangladesh University of Engineering and Technology（孟加拉国工程技术大学）
Digital security has been an active area of research interest due to the rapid adaptation of internet infrastructure, the increasing popularity of social media, and digital cameras. Due to inherent differences in working principles to generate an image, different camera brands left behind different intrinsic processing noises which can be used to identify the camera brand. In the last decade, many signal processing and deep learning-based methods have been proposed to identify and isolate this noise from the scene details in an image to detect the source camera brand. One prominent solution is…
Recently, transformer networks have outperformed traditional deep neural networks in natural language processing and show a large potential in many computer vision tasks compared to convolutional backbones. In the original transformer, readout tokens are used as designated vectors for aggregating information from other tokens. However, the performance of using readout tokens in a vision transformer is limited. Therefore, we propose a novel fusion strategy to integrate radar data into a dense prediction transformer network by reassembling camera representations with radar representations. Inste…
We present a CNN-based predictive lossless compression scheme for raw color mosaic images of digital cameras. This specialized application problem was previously understudied but it is now becoming increasingly important, because modern CNN methods for image restoration tasks (e.g., superresolution, low lighting enhancement, deblurring), must operate on original raw mosaic images to obtain the best possible results. The key innovation of this paper is a high-order nonlinear CNN predictor of spatial-spectral mosaic patterns. The deep learning prediction can model highly complex sample dependenc…
Conventional image signal processing (ISP) frameworks are designed to reconstruct an RGB image from a single raw measurement. As multi-camera systems become increasingly popular these days, it is worth exploring improvements in ISP frameworks by incorporating raw measurements from multiple cameras. This manuscript is an intermediate progress report of a new ISP framework that is under development, StereoISP. It employs raw measurements from a stereo camera pair to generate a demosaicked, denoised RGB image by utilizing disparity estimated between the two views. We investigate StereoISP by test…
The Hong Kong Polytechnic University（香港理工大学）；DJI Co.,Ltd.（大疆创新科技有限公司）
Traditional image signal processing (ISP) pipeline consists of a set of individual image processing components onboard a camera to reconstruct a high-quality sRGB image from the sensor raw data. Due to the hand-crafted nature of the ISP components, traditional ISP pipeline has limited reconstruction quality under challenging scenes. Recently, the convolutional neural networks (CNNs) have demonstrated their competitiveness in solving many individual image processing problems, such as image denoising, demosaicking, white balance and contrast enhancement. However, it remains a question whether a …
Purpose: The purpose of this study was to observe change in accuracies of convolutional neural networks (CNN) models (ratio of correct classifications to total predictions) on thoracic radiological images by creating different binary classification models based on age, gender, and image pre-processing filters on 14 pathologies. Methodology: This is a quantitative research exploring variation in CNN model accuracies. Radiological thoracic images were divided by age and gender and pre-processed by various image processing filters. Findings: We found partial support for enhancement to model accur…
SenseTime Research（商汤科技研究院）；The Chinese University of Hong Kong（香港中文大学）；Beihang University（北京航空航天大学）；Nanyang Technological University（南洋理工大学）；Shanghai AI Laboratory（上海人工智能实验室）
Image Signal Processor (ISP) is a crucial component in digital cameras that transforms sensor signals into images for us to perceive and understand. Existing ISP designs always adopt a fixed architecture, e.g., several sequential modules connected in a rigid order. Such a fixed ISP architecture may be suboptimal for real-world applications, where camera sensors, scenes and tasks are diverse. In this study, we propose a novel Reconfigurable ISP (ReconfigISP) whose architecture and parameters can be automatically tailored to specific data and tasks. In particular, we implement several ISP module…
University of Southampton（南安普顿大学）；Fuzhou University（福州大学）
The traditional image compressors, e.g., BPG and H.266, have achieved great image and video compression quality. Recently, Convolutional Neural Network has been used widely in image compression. We proposed an attention-based convolutional neural network for low bit-rate compression to post-process the output of traditional image compression decoder. Across the experimental results on validation sets, the post-processing module trained by MAE and MS-SSIM losses yields the highest PSNR of 32.10 on average at the bit-rate of 0.15.
Digital cameras and mobile phones enable us to conveniently record precious moments. While digital image quality is constantly being improved, taking high-quality photos of digital screens still remains challenging because the photos are often contaminated with moiré patterns, a result of the interference between the pixel grids of the camera sensor and the device screen. Moiré patterns can severely damage the visual quality of photos. However, few studies have aimed to solve this problem. In this paper, we introduce a novel multiresolution fully convolutional network for automatically removin…
The record-breaking achievements of deep neural networks (DNNs) in image classification and detection tasks resulted in a surge of new computer vision applications during the past years. However, their computational complexity is restricting their deployment to powerful stationary or complex dedicated processing hardware, limiting their use in smart edge processing applications. We propose an automated deployment framework for DNN acceleration at the edge on field-programmable gate array (FPGA)-based cameras. The framework automatically converts an arbitrary-sized and quantized trained network…
Space and Naval Warfare Systems Center Pacific（太平洋空间与海战系统中心）
Traditional metrics for evaluating the efficacy of image processing techniques do not lend themselves to understanding the capabilities and limitations of modern image processing methods - particularly those enabled by deep learning. When applying image processing in engineering solutions, a scientist or engineer has a need to justify their design decisions with clear metrics. By applying blind/referenceless image spatial quality (BRISQUE), Structural SIMilarity (SSIM) index scores, and Peak signal-to-noise ratio (PSNR) to images before and after image processing, we can quantify quality impro…
Digital cameras are commonly used for diagnostic purposes in large-scale physics experiments. A typical image diagnostic system consists of an optical setup, digital camera, frame grabber, image processing CPU, and data analysis tool. The standard architecture of the imaging system has a number of disadvantages. Data transmitted from a camera are buffered multiple times and must be converted between various protocols before they are finally transmitted to the host memory. Such an architecture makes the system quite complicated, limits its performance and, in consequence, increases its price. T…
This paper presents a method for detection and recognition of traffic signs based on information extracted from an event camera. The solution used a FireNet deep convolutional neural network to reconstruct events into greyscale frames. Two YOLOv4 network models were trained, one based on greyscale images and the other on colour images. The best result was achieved for the model trained on the basis of greyscale images, achieving an efficiency of 87.03%.
In today's world, the amount of data produced in every field has increased at an unexpected level. In the face of increasing data, the importance of data processing has increased remarkably. Our resource topic is on the processing of video data, which has an important place in increasing data, and the production of summary videos. Within the scope of this resource, a new method for anomaly detection with object-based unsupervised learning has been developed while creating a video summary. By using this method, the video data is processed as pixels and the result is produced as a video segment.…
The limited dynamic range of commercial compact camera sensors results in an inaccurate representation of scenes with varying illumination conditions, adversely affecting image quality and subsequently limiting the performance of underlying image processing algorithms. Current state-of-the-art (SoTA) convolutional neural networks (CNN) are developed as post-processing techniques to independently recover under-/over-exposed images. However, when applied to images containing real-world degradations such as glare, high-beam, color bleeding with varying noise intensity, these algorithms amplify th…
There has been significant amount of research work on human activity classification relying either on Inertial Measurement Unit (IMU) data or data from static cameras providing a third-person view. Using only IMU data limits the variety and complexity of the activities that can be detected. For instance, the sitting activity can be detected by IMU data, but it cannot be determined whether the subject has sat on a chair or a sofa, or where the subject is. To perform fine-grained activity classification from egocentric videos, and to distinguish between activities that cannot be differentiated b…
Stony Brook University（石溪大学）；The State University of New York Korea（纽约州立大学韩国分校）
We applied pre-defined kernels also known as filters or masks developed for image processing to convolution neural network. Instead of letting neural networks find its own kernels, we used 41 different general-purpose kernels of blurring, edge detecting, sharpening, discrete cosine transformation, etc. for the first layer of the convolution neural networks. This architecture, thus named as general filter convolutional neural network (GFNN), can reduce training time by 30% with a better accuracy compared to the regular convolutional neural network (CNN). GFNN also can be trained to achieve 90% …
Extracting per-frame features using convolutional neural networks for real-time processing of video data is currently mainly performed on powerful GPU-accelerated workstations and compute clusters. However, there are many applications such as smart surveillance cameras that require or would benefit from on-site processing. To this end, we propose and evaluate a novel algorithm for change-based evaluation of CNNs for video data recorded with a static camera setting, exploiting the spatio-temporal sparsity of pixel changes. We achieve an average speed-up of 8.6x over a cuDNN baseline on a realis…
Faculty of Physics and Mathematics, Benemérita Universidad Autónoma de Puebla（普埃布拉自治大学物理与数学学院）
Gliomas are brain tumors composed of different highly heterogeneous histological subregions. Image analysis techniques to identify relevant tumor substructures have high potential for improving patient diagnosis, treatment and prognosis. However, due to the high heterogeneity of gliomas, the segmentation task is currently a major challenge in the field of medical image analysis. In the present work, the database of the Brain Tumor Segmentation (BraTS) Challenge 2018, composed of multimodal MRI scans of gliomas, was studied. A segmentation methodology based on the design and application of conv…
Consumer light-field (LF) cameras suffer from a low or limited resolution because of the angular-spatial trade-off. To alleviate this drawback, we propose a novel learning-based approach utilizing attention mechanism to synthesize novel views of a light-field image using a sparse set of input views (i.e., 4 corner views) from a camera array. In the proposed method, we divide the process into three stages, stereo-feature extraction, disparity estimation, and final image refinement. We use three sequential convolutional neural networks for each stage. A residual convolutional block attention mod…
Camera model identification has earned paramount importance in the field of image forensics with an upsurge of digitally altered images which are constantly being shared through websites, media, and social applications. But, the task of identification becomes quite challenging if metadata are absent from the image and/or if the image has been post-processed. In this paper, we present a DenseNet pipeline to solve the problem of identifying the source camera-model of an image. Our approach is to extract patches of 256*256 from a labeled image dataset and apply augmentations, i.e., Empirical Mode…
Image compression is an essential and last processing unit in the camera image signal processing (ISP) pipeline. While many studies have been made to replace the conventional ISP pipeline with a single end-to-end optimized deep learning model, image compression is barely considered as a part of the model. In this paper, we investigate the designing of a fully end-to-end optimized camera ISP incorporating image compression. To this end, we propose RAWtoBit network (RBN) that can effectively perform both tasks simultaneously. RBN is further improved with a novel knowledge distillation scheme by …
The video acquisition and processing systems are commonly used in industrial and scientific applications. Many of them utilize Camera Link interface for the transmission of a video stream from the camera to the host system. The framework presented in the paper enables capturing such data, processing it and transmitting to the host CPU. It consist of MTCA.4-compliant frame grabber and a set of software libraries supporting several different cameras. It is designed for use in large scale physics experiments such as ITER tokamak or European X-Ray Free-Electron Laser (E-XFEL), as well as in the Ce…
We demonstrate that image reconstruction can be achieved via a convolutional neural network for a "see-through" computational camera comprised of a transparent window and a CMOS image sensor. Furthermore, we compared classification results using a classifier network for the raw sensor data vs the reconstructed images. The results suggest that similar classification accuracy is likely possible in both cases with appropriate network optimizations. All networks were trained and tested for the MNIST (6 classes), EMNIST and the Kanji49 datasets.
We use convolutional neural networks to recover images optically down-sampled by $6.7\times$ using coherent aperture synthesis over a 16 camera array. Where conventional ptychography relies on scanning and oversampling, here we apply decompressive neural estimation to recover full resolution image from a single snapshot, although as shown in simulation multiple snapshots can be used to improve SNR. In place training on experimental measurements eliminates the need to directly calibrate the measurement system. We also present simulations of diverse array camera sampling strategies to explore ho…
University of Winnipeg（温尼伯大学）；Weatherlogics Inc.（韦瑟洛吉克斯公司）
Weather is an important factor affecting transportation and road safety. In this paper, we leverage state-of-the-art convolutional neural networks in labelling images taken by street and highway cameras located across across North America. Road camera snapshots were used in experiments with multiple deep learning frameworks to classify images by road condition. The training data for these experiments used images labelled as dry, wet, snow/ice, poor, and offline. The experiments tested different configurations of six convolutional neural networks (VGG-16, ResNet50, Xception, InceptionResNetV2, …
To compose a 360 image from a rig with multiple fisheye cameras, a conventional processing pipeline first performs demosaicking on each fisheye camera's Bayer-patterned grid, then translates demosaicked pixels from the camera grid to a rectified image grid---thus performing two image interpolation steps in sequence. Hence interpolation errors can accumulate, and acquisition noise in the captured pixels can pollute neighbors in two consecutive processing stages. In this paper, we propose a joint processing framework that performs demosaicking and grid-to-grid mapping simultaneously---thus limit…
