A large number of sensors deployed in recent years in various setups and their data is readily available in dedicated databases or in the cloud. Of particular interest is real-time data processing and 3D visualization in web-based user interfaces that facilitate spatial information understanding and sharing, hence helping the decision making process for all the parties involved. In this research, we provide a prototype system for near real-time, continuous X3D-based visualization of processed sensor data for two significant applications: thermal monitoring for residential/commercial buildings and nitrogen cycle monitoring in water beds for aquaponics systems. As sensors are sparsely placed, in each application, where they collect data for large periods (of up to one year), we employ a Finite Differences Method and a Neural Networks model to approximate data distribution in the entire volume.
We propose a new secure transmission scheme which uses directional modulation (DM) with artificial noise and is aided by the intelligent reflecting surface (IRS). Specifically, the direct path and IRS-enabled reflect path carry the same confidential signal and thus can be coherently added at the desired position to maximize the total received power, while the received signals at other positions are distorted. We derive a closed-form expression for the secrecy rate achieved by the proposed scheme. Using simulation results, we show that the proposed scheme can achieve two-dimensional secure tran…
With the rapid development of smart terminals and infrastructures, as well as diversified applications (e.g., virtual and augmented reality, remote surgery and holographic projection) with colorful requirements, current networks (e.g., 4G and upcoming 5G networks) may not be able to completely meet quickly rising traffic demands. Accordingly, efforts from both industry and academia have already been put to the research on 6G networks. Recently, artificial intelligence (AI) has been utilized as a new paradigm for the design and optimization of 6G networks with a high level of intelligence. Ther…
This paper studies an Internet-of-Things (IoT) network employing a reconfigurable intelligent surface (RIS) over generalized fading channels. Inspired by the promising potential of RIS-based transmission, we investigate a RIS-enabled IoT network with the source node employing a RIS-based access point. The system is modelled with reference to a receiver transmitter pair and the Fisher-Snedecor F model is adopted to analyse the composite fading and shadowing channel. Closed-form expressions are derived for the system with regards to the average capacity, average bit error rate (BER) and outage p…
The Internet of Things (IoT) is the enabler for smart city to achieve the envision of the "Internet of Everything" by intelligently connecting devices without human interventions. The explosive growth of IoT devices makes the amount of business data generated by machine-type communications (MTC) account for a great proportion in all communication services. The fifth-generation (5G) specification for cellular networks defines two types of application scenarios for MTC: One is massive machine type communications (mMTC) requiring massive connections, while the other is ultra-reliable low latency …
This paper investigates the achievable rate maximization problem of a downlink unmanned aerial vehicle (UAV)-enabled communication system aided by an intelligent omni-surface (IOS). Different from the state-of-the-art reconfigurable intelligent surface (RIS) that only reflects incident signals, the IOS can simultaneously reflect and transmit the signals, thereby providing full-dimensional rate enhancement. To tackle such a problem, we formulate it by jointly optimizing the IOS's phase shift and the UAV trajectory. Although it is difficult to solve it optimally due to its non-convexity, we prop…
This paper first describes the introduction of 6G-empowered V2X communications and IRS technology. Then it discusses different use case scenarios of IRS enabled V2X communications and reports recent advances in the existing literature. Next, we focus our attention on the scenario of vehicular edge computing involving IRS enabled drone communications in order to reduce vehicle computational time via optimal computational and communication resource allocation. At the end, this paper highlights current challenges and discusses future perspectives of IRS enabled V2X communications in order to impr…
Reconfigurable intelligent surface (RIS) offers tremendous spectrum and energy efficiency in wireless networks by adjusting the amplitudes and/or phases of passive reflecting elements to optimize signal reflection. With the agility and mobility of unmanned aerial vehicles (UAVs), RIS can be mounted on UAVs to enable three-dimensional signal reflection. Compared to the conventional terrestrial RIS (TRIS), the aerial RIS (ARIS) enjoys higher deployment flexibility, reliable air-to-ground links, and panoramic full-angle reflection. However, due to UAV's limited payload and battery capacity, it is…
With the rapid development of the smart city, high-level autonomous driving, intelligent manufacturing, and etc., the stringent industrial-level requirements of the extremely low latency and high reliability for communication and new trends for sub-centimeter sensing have transcended the abilities of 5G and call for the development of 6G. Based on analyzing the function design of the communication, sensing and the emerging intelligent computation systems, we propose the joint communication, sensing and computation (JCSC) framework for 6G intelligent machine-type communication (IMTC) network to…
This paper investigates the downlink transmission of reconfigurable intelligent surface (RIS)-aided cooperative non-orthogonal-multiple-access (C-NOMA), where both half-duplex (HD) and full-duplex (FD) relaying modes are considered. The system model consists of one base station (BS), two users and one RIS. The goal is to minimize the total transmit power at both the BS and at the user-cooperating relay for each relaying mode by jointly optimizing the power allocation coefficients at the BS, the transmit power coefficient at the relay user, and the passive beamforming at the RIS, subject to pow…
This paper investigates intelligent reflecting surface (IRS) enabled non-line-of-sight (NLoS) wireless sensing, in which an IRS is deployed to assist an access point (AP) to sense a target in its NLoS region. It is assumed that the AP is equipped with multiple antennas and the IRS is equipped with a uniform linear array. The AP aims to estimate the target's direction-of-arrival (DoA) with respect to the IRS, based on the echo signals from the AP-IRS-target-IRS-AP link. Under this setup, we jointly design the transmit beamforming at the AP and the reflective beamforming at the IRS to minimize t…
A reconfigurable intelligent surface (RIS) employs an array of individually-controllable elements to scatter incident signals in a desirable way; for example, to facilitate links between base stations and mobile stations that would otherwise be blocked. A principal consideration in the study of RIS-enabled propagation channels is path loss. This paper presents a simple yet broadly-applicable method for calculating the path loss of a channel consisting of a passive reflectarray-type RIS. This model is then used to characterize path loss as a function of RIS size, link geometry, and the method u…
TU Braunschweig（布伦瑞克工业大学）；Beijing Jiaotong University（北京交通大学）；Beijing University of Posts and Telecommunications（北京邮电大学）
Reconfigurable intelligent surface (RIS) is an emerging technology for future wireless communication systems. In this work, we consider downlink spatial multiplexing enabled by the RIS for weighted sum-rate (WSR) maximization. In the literature, most solutions use alternating gradient-based optimization, which has moderate performance, high complexity, and limited scalability. We propose to apply a fully convolutional network (FCN) to solve this problem, which was originally designed for semantic segmentation of images. The rectangular shape of the RIS and the spatial correlation of channels w…
Given its ability to control and manipulate wireless environments, reconfigurable intelligent surface (RIS), also known as intelligent reflecting surface (IRS), has emerged as a key enabler technology for the six-generation (6G) cellular networks. In the meantime, vehicular environment radio propagation is negatively influenced by a large set of objects that cause transmission distortion such as high buildings. Therefore, this work is devoted to explore the area of RIS technology integration with vehicular communications while considering the dynamic nature of such communication environment. S…
University of Electronic Science and Technology of China（电子科技大学）；University of Essex（埃塞克斯大学）
Research on the sixth generation cellular networks (6G) is gaining huge momentum to achieve ubiquitous wireless connectivity. Connected autonomous driving (CAV) is a critical vertical envisioned for 6G, holding great potentials of improving road safety, road and energy efficiency. However the stringent service requirements of CAV applications on reliability, latency and high speed communications will present big challenges to 6G networks. New channel access algorithms and intelligent control schemes for connected vehicles are needed for 6G supported CAV. In this paper, we investigated 6G suppo…
Terahertz (THz) communications have been envisioned as a promising enabler to provide ultra-high data transmission for sixth generation (6G) wireless networks. To tackle the blockage vulnerability brought by severe path attenuation and poor diffraction of THz waves, an intelligent reflecting surface (IRS) is put forward to smartly control the incident THz waves by adjusting the phase shifts. In this paper, we firstly design an efficient hardware structure of graphene-based IRS with phase response up to 306.82 degrees. Subsequently, to characterize the capacity of the IRS-enabled THz multiple-i…
Vehicle-to-everything (V2X) communication is expected to support many promising applications in next-generation wireless networks. The recent development of integrated sensing and communications (ISAC) technology offers new opportunities to meet the stringent sensing and communication (S&C) requirements in V2X networks. However, considering the relatively small radar cross section (RCS) of the vehicles and the limited transmit power of the road site units (RSUs), the power of echoes may be too weak to achieve effective target detection and tracking. To handle this issue, we propose a novel sen…
With growing security threats to the evolving wireless systems, protecting user privacy becomes progressively challenging. Even if the transmitted information is encrypted and the potential wiretap channel is physically limited (e.g. through information-theoretic security approaches), the raw data itself, such as transmitter position and transmission pattern, could expose confidential information. In this context, covert communication that intends to hide the existence of transmission from an observant adversary by exploiting the physical characteristics of the wireless medium has been activel…
This paper studies the physical layer security (PLS) of a vehicular network employing reconfigurable intelligent surfaces (RISs). RIS technologies are emerging as an important paradigm for the realisation of next-generation smart radio environments, where large numbers of small, low-cost and passive elements, reflect the incident signal with an adjustable phase shift without requiring a dedicated energy source. Inspired by the promising potential of RIS-based transmission, we investigate the PLS of two vehicular network system models: One with vehicle-to-vehicle communication with the source e…
Reconfigurable intelligent surface has recently emerged as a promising technology for shaping the wireless environment by leveraging massive low-cost reconfigurable elements. Prior works mainly focus on a single-layer metasurface that lacks the capability of suppressing multiuser interference. By contrast, we propose a stacked intelligent metasurface (SIM)-enabled transceiver design for multiuser multiple-input single-output downlink communications. Specifically, the SIM is endowed with a multilayer structure and is deployed at the base station to perform transmit beamforming directly in the e…
Vehicle-to-everything (V2X) communication and services have been garnering significant interest from different stakeholders as part of future intelligent transportation systems (ITSs). This is due to the many benefits they offer. However, many of these services have stringent performance requirements, particularly in terms of the delay/latency. Multi-access/mobile edge computing (MEC) has been proposed as a potential solution for such services by bringing them closer to vehicles. Yet, this introduces a new set of challenges such as where to place these V2X services, especially given the limit …
Innovative reconfigurable intelligent surface (RIS) technologies are rising and recognized as promising candidates to enhance 6G and beyond wireless communication systems. RISs acquire the ability to manipulate electromagnetic signals, thus, offering a degree of control over the wireless channel and the potential for many more benefits. Furthermore, active RIS designs have recently been introduced to combat the critical double fading problem and other impairments passive RIS designs may possess. In this paper, the potential and flexibility of active RIS technology are exploited for uplink syst…
The current literature on intelligent reflecting surface (IRS) focuses on optimizing the IRS phase shifts to yield coherent beamforming gains, under the assumption of perfect channel state information (CSI) of individual IRS-assisted links, which is highly impractical. This work, instead, considers the random rotations scheme at the IRS in which the reflecting elements only employ random phase rotations without requiring any CSI. The only CSI then needed is at the base station (BS) of the overall channel to implement the beamforming transmission scheme. Under this framework, we derive the sum-…
Full-duplex (FD) transmission has already been regarded and developed as a promising method to improve the utilization efficiency of the limited spectrum resource, as transmitting and receiving are allowed to simultaneously occur on the same frequency band. Nowadays, benefiting from the recent development of intelligent reflecting surface (IRS), some unique electromagnetic (EM) functionalities, like wavefront shaping, focusing, anomalous reflection, absorption, frequency shifting, and nonreciprocity can be realized by soft-controlled elements at the IRS, showing the capability of reconfiguring…
Unmanned aerial vehicles (UAVs) are envisioned to be extensively employed for assisting wireless communications in Internet of Things (IoT) applications. On the other hand, terahertz (THz) enabled intelligent reflecting surface (IRS) is expected to be one of the core enabling technologies for forthcoming beyond-5G wireless communications that promise a broad range of data-demand applications. In this paper, we propose a UAV-mounted IRS (UIRS) communication system over THz bands for confidential data dissemination from an access point (AP) towards multiple ground user equipments (UEs) in IoT ne…
ShanghaiTech University（上海科技大学）；Shanghai Jiao Tong University（上海交通大学）；University College London（伦敦大学学院）；Terminus Group（特斯联集团）；Peng Cheng Laboratory（鹏城实验室）；Shenzhen SmartCity Technology Development Group Company Ltd.（深圳市智慧城市科技发展集团有限公司）
In the intelligent communication field, deep learning (DL) has attracted much attention due to its strong fitting ability and data-driven learning capability. Compared with the typical DL feedforward network structures, an enhancement structure with direct data feedback have been studied and proved to have better performance than the feedfoward networks. However, due to the above simple feedback methods lack sufficient analysis and learning ability on the feedback data, it is inadequate to deal with more complicated nonlinear systems and therefore the performance is limited for further improve…
This paper aims at identifying emerging computational intelligence trends for the design and modeling of complex biometric-enabled infrastructure and systems. Biometric-enabled systems are evolving towards deep learning and deep inference using the principles of adaptive computing, - the front tides of the modern computational intelligence domain. Therefore, we focus on intelligent inference engines widely deployed in biometrics. Computational intelligence applications that cover a wide spectrum of biometric tasks using physiological and behavioral traits are chosen for illustration. We highli…
Reconfigurable intelligent surface (RIS) has emerged as a promising technology for achieving high spectrum and energy efficiency in future wireless communication networks. In this paper, we investigate an RIS-aided single-cell multi-user mobile edge computing (MEC) system where an RIS is deployed to support the communication between a base station (BS) equipped with MEC servers and multiple single-antenna users. To utilize the scarce frequency resource efficiently, we assume that users communicate with BS based on a non-orthogonal multiple access (NOMA) protocol. Each user has a computation ta…
Besides improving communication performance, intelligent reflecting surfaces (IRSs) are also promising enablers for achieving larger sensing coverage and enhanced sensing quality. Nevertheless, in the absence of a direct path between the base station (BS) and the targets, multi-target sensing is generally very difficult, since IRSs are incapable of proactively transmitting sensing beams or analyzing target information. Moreover, the echoes of different targets reflected via the IRS-established virtual links share the same directionality at the BS. In this paper, we study a wireless system comp…
Intelligent reflecting surface (IRS) is an emerging technology to enhance the spectral and energy efficiency of wireless communications cost-effectively. This letter considers a new multi-IRS aided wireless network where a cascaded line-of-sight (LoS) link is established between the base station (BS) and a remote user by leveraging the multi-hop signal reflection of selected IRSs. As compared to the conventional single-/double-hop IRS system, multi-hop IRS system provides more pronounced path diversity and cooperative passive beamforming gains, especially in the environment with dense obstacle…
