Micro-energy harvesting wireless network (MEHWN) enables a perpetual network deployment that cannot be achieved in traditional battery-operated counterparts. Despite its sustainability, end-to-end delay in an MEHWN could be very large, due to the large waiting delay on each hop in the network. In this work, we consider an MEHWN where every node constantly switches between on and off states, due to the limited amount of harvested energy. The network delay of an MEHWN is not well understood because of the energy uncertainty, asynchronized working schedules, and complex network topology in an MEHWN. To close this research gap, we define the relative network delay as the ratio between end-to-end delay and distance. Compared to previous works, we are able to identify a closed-form expression of the lower bound and a tighter upper bound of the relative network delay. The theoretical findings are verified in simulations. Our theoretical analysis deepens the understanding about the interplay of network delay, energy harvesting rate, and node density in an MEHWN.
Considering an energy harvesting sensor network, the overall probability of event loss is derived. Based on this result, a variety of harvesting resource allocation schemes (sizing the energy storages and the harvesting devices, under a total cost constraint) are provided. Their performances are verified and compared through simulations.
Energy harvesting emerges as a potential solution for prolonging the lifetime of the energy-constrained mobile wireless devices. In this paper, we focus on Radio Frequency (RF) energy harvesting for multiuser multicarrier mobile wireless networks. Specifically, we propose joint data and energy transfer optimization frameworks for powering mobile wireless devices through RF energy harvesting. We introduce a power utility that captures the power consumption cost at the base station (BS) and the used power from the users' batteries, and determine optimal power resource allocations that meet data …
Radio frequency (RF) energy harvesting and transfer techniques have recently become alternative methods to power the next generation of wireless networks. As this emerging technology enables proactive replenishment of wireless devices, it is advantageous in supporting applications with quality-of-service (QoS) requirement. This article focuses on the resource allocation issues in wireless networks with RF energy harvesting capability, referred to as RF energy harvesting networks (RF-EHNs). First, we present an overview of the RF-EHNs, followed by a review of a variety of issues regarding resou…
The dramatic mobile data traffic growth is not only resulting in the spectrum crunch but is also leading to exorbitant energy consumption. It is thus desirable to liberate mobile and wireless networks from the constraint of the spectrum scarcity and to rein in the growing energy consumption. This article introduces FreeNet, figuratively synonymous to "Free Network", which engineers the spectrum and energy harvesting techniques to alleviate the spectrum and energy constraints by sensing and harvesting spare spectrum for data communications and utilizing renewable energy as power supplies, respe…
In this paper, the theoretical sustainable capacity of wireless networks with radio frequency (RF) energy harvesting is analytically studied. Specifically, we consider a large scale wireless network where base stations (BSs) and low power wireless devices are deployed by homogeneous Poisson point process (PPP) with different spatial densities. Wireless devices exploit the downlink transmissions from the BSs for either information delivery or energy harvesting. Generally, a BS schedules downlink transmission to wireless devices. The scheduled device receives the data information while other dev…
Radio Frequency (RF) Energy Harvesting holds a promising future for generating a small amount of electrical power to drive partial circuits in wirelessly communicating electronics devices. Reducing power consumption has become a major challenge in wireless sensor networks. As a vital factor affecting system cost and lifetime, energy consumption in wireless sensor networks is an emerging and active research area. This chapter presents a practical approach for RF Energy harvesting and management of the harvested and available energy for wireless sensor networks using the Improved Energy Efficien…
Heterogeneous ultra-dense networks enable ultra-high data rates and ultra-low latency through the use of dense sub-6 GHz and millimeter wave (mmWave) small cells with different antenna configurations. Existing work has widely studied spectral and energy efficiency in such networks and shown that high spectral and energy efficiency can be achieved. This article investigates the benefits of heterogeneous ultra-dense network architecture from the perspectives of three promising technologies, i.e., physical layer security, caching, and wireless energy harvesting, and provides enthusiastic outlook …
Technological advances in the Internet of Things (IoT) have lead the way for technology to be used in ways that were never possible before. Through the development of devices with low-power radios, Wireless Sensor Networks (WSN) can be configured for almost any type of application. Agricultural has been one example where IoT and WSN have been able to increase productivity, efficiency, and output yield. Systems that previously required manual operation can be easily replaced with sensors and actuators to automate the process such as irrigation and disease management. Powering these devices is a…
In this paper, we consider a wireless cooperative network with an energy harvesting relay which is powered by the energy harvested from ambient RF waves, such as that of a data packet. At any given time, the relay operates either in the energy harvesting (EH) mode or the data decoding (DD) mode, but not both. Separate energy and data buffers are kept at the relay to store the harvested energy and decoded data packets, respectively. In this paper, we optimize a time switching policy that switches between the EH mode and DD mode to maximize the system throughput or minimize the average transmiss…
Energy harvesting (EH) is a promising technology for realizing energy efficient wireless networks. In this paper, we utilize the ambient RF energy, particularly interference from neighboring transmissions, to replenish the batteries of the EH enabled nodes. However, RF energy harvesting imposes new challenges into the analysis of wireless networks. Our objective in this work is to investigate the performance of a slotted Aloha random access wireless network consisting of two types of nodes, namely Type I which has unlimited energy supply and Type II which is solely powered by an RF energy harv…
Wireless energy harvesting sensor networks constitute a new paradigm, where the motes deployed in the field are no longer constrained by the limited battery resource, but are able to re-charge themselves through directed electromagnetic energy transfer. The energy sources, which we call actors, are mobile and move along pre-decided patterns while radiating an appropriate level of energy, sufficient enough to charge the sensors at an acceptable rate. This is the first work that investigates the impact of energy transfer, especially concerning the energy gain in the sensors, the energy spent by …
In this work, we investigate the capacity allocation problem in the energy harvesting wireless sensor networks (WSNs) with interference channel. For the fixed topologies of data and energy, we formulate the optimization problem when the data flow remains constant on all data links and each sensor node harvests energy only once in a time slot. We focus on the optimal data rates, power allocations and energy transfers between sensor nodes in a time slot. Our goal is to minimize the total delay in the network under two scenarios, i.e., no energy transfer and energy transfer. Furthermore, since th…
We consider an energy harvesting sensor transmitting latency-sensitive data over a fading channel. We aim to find the optimal transmission scheduling policy that minimizes the packet queuing delay given the available harvested energy. We formulate the problem as a Markov decision process (MDP) over a state-space spanned by the transmitter's buffer, battery, and channel states, and analyze the structural properties of the resulting optimal value function, which quantifies the long-run performance of the optimal scheduling policy. We show that the optimal value function (i) is non-decreasing and…
Energy harvesting or power harvesting or energy scavenging is a process where energy is derived from external sources (e.g. solar power, thermal energy, wind energy, salinity gradients, kinetic energy etc.), captured, and stored for small, wireless autonomous devices, like those used in wearable electronics and wireless sensor networks. This paper is focused to applications of Energy Harvesting in Wireless Sensor Networks. This is going to help the ever growing M2M (Machine to Machine) field where there is an exponential growth of intelligent devices and automatic control of these is of paramo…
Radio frequency (RF) energy transfer and harvesting techniques have recently become alternative methods to power the next generation wireless networks. As this emerging technology enables proactive energy replenishment of wireless devices, it is advantageous in supporting applications with quality of service (QoS) requirement. In this paper, we present an extensive literature review on the research progresses in wireless networks with RF energy harvesting capability, referred to as RF energy harvesting networks (RF-EHNs). First, we present an overview of the RF-EHNs including system architectu…
We consider the wireless powered communications where users harvest energy from non-dedicated sources. The user follows a harvest-then-transmit protocol: in first phase of a slot time the source node harvests energy from a nearby conventional Access Point, then transmit information to its destination node or relay node in the second phase. We obtain the optimal\textit{ harvesting ratio} to maximize the expected throughput for direct transmission (DT )and decode forward (DF) relay under outage constraint, respectively. Our results reveal that the optimal harvest ratio for DT is dominated by the…
Spectrum efficiency and energy efficiency are two critical issues in designing wireless networks. Through dynamic spectrum access, cognitive radios can improve the spectrum efficiency and capacity of wireless networks. On the other hand, radio frequency (RF) energy harvesting has emerged as a promising technique to supply energy to wireless networks and thereby increase their energy efficiency. Therefore, to achieve both spectrum and energy efficiencies, the secondary users in a cognitive radio network (CRN) can be equipped with the RF energy harvesting capability and such a network can be ref…
For energy-harvesting sensor nodes, rechargeable batteries play a critical role in sensing and transmissions. By coupling two simple Markovian queue models in a delay-tolerant networking setting, we consider the problem of battery sizing for these sensor nodes to operate effectively: given the intended energy depletion and overflow probabilities, how to decide the minimal battery capacity that is required to ensure opportunistic data exchange despite the inherent intermittency of renewable energy generation.
This paper studies two power control problems in energy harvesting wireless networks where one hybrid base station (HBS) and all user equipments (UEs) are operating in in-band full-duplex mode. We consider minimizing the aggregate power subject to the quality of service requirement constraint, and maximizing the aggregate throughput. We address these two problems by proposing two distributed power control schemes for controlling the uplink transmit power by the UEs and the downlink energy harvesting signal power by the HBS. In our proposed schemes, the HBS updates the downlink transmit power l…
Ambient RF (Radio Frequency) energy harvesting technique has recently been proposed as a potential solution to provide proactive energy replenishment for wireless devices. This paper aims to analyze the performance of a battery-free wireless sensor powered by ambient RF energy harvesting using a stochastic geometry approach. Specifically, we consider the point-to-point uplink transmission of a wireless sensor in a stochastic geometry network, where ambient RF sources, such as mobile transmit devices, access points and base stations, are distributed as a Ginibre alpha-determinantal point proces…
Wireless Sensor Networks (WSNs) are extensively used in monitoring applications such as humidity and temperature sensing in smart buildings, industrial automation, and predicting crop health. Sensor nodes are deployed in remote places to sense the data information from the environment and to transmit the sensing data to the Base Station (BS). When a sensor is drained of energy, it can no longer achieve its role without a substituted source of energy. However, limited energy in a sensor's battery prevents the long-term process in such applications. In addition, replacing the sensors' batteries …
We study a sensor node with an energy harvesting source. The generated energy can be stored in a buffer. The sensor node periodically senses a random field and generates a packet. These packets are stored in a queue and transmitted using the energy available at that time. We obtain energy management policies that are throughput optimal, i.e., the data queue stays stable for the largest possible data rate. Next we obtain energy management policies which minimize the mean delay in the queue.We also compare performance of several easily implementable sub-optimal energy management policies. A gree…
We consider a two-hop communication network consisted of a source node, a relay and a destination node in which the source and the relay node have external traffic arrivals. The relay forwards a fraction of the source node's traffic to the destination and the cooperation is performed at the network level. In addition, both source and relay nodes have energy harvesting capabilities and an unlimited battery to store the harvested energy. We study the impact of the energy constraints on the stability region. Specifically, we provide inner and outer bounds on the stability region of the two-hop ne…
Wireless networks can be self-sustaining by harvesting energy from ambient radio-frequency (RF) signals. Recently, researchers have made progress on designing efficient circuits and devices for RF energy harvesting suitable for low-power wireless applications. Motivated by this and building upon the classic cognitive radio (CR) network model, this paper proposes a novel method for wireless networks coexisting where low-power mobiles in a secondary network, called secondary transmitters (STs), harvest ambient RF energy from transmissions by nearby active transmitters in a primary network, calle…
In this paper, the deployment of federated learning (FL) is investigated in an energy harvesting wireless network in which the base station (BS) employs massive multiple-input multiple-output (MIMO) to serve a set of users powered by independent energy harvesting sources. Since a certain number of users may not be able to participate in FL due to the interference and energy constraints, a joint energy management and user scheduling problem in FL over wireless systems is formulated. This problem is formulated as an optimization problem whose goal is to minimize the FL training loss via optimizi…
This paper studies a novel user cooperation method in a wireless powered communication network (WPCN), where a pair of closely located devices first harvest wireless energy from an energy node (EN) and then use the harvested energy to transmit information to an access point (AP). In particular, we consider the two energy-harvesting users exchanging their messages and then transmitting cooperatively to the AP using space-time block codes. Interestingly, we exploit the short distance between the two users and allow the information exchange to be achieved by energy-conserving backscatter techniqu…
In recent years, the radio frequency (RF) energy harvesting technique is considered as a favorable alternative to supply power for the next-generation wireless sensor networks. Due to the features of energy self-sustainability and long lifetime, the energy harvesting sensor network (RF-EHSN) becomes a promising solution to provide smart healthcare services. Nowadays, many energy harvesting based applications have been developed for monitoring the health status of human beings; how to benefit animals, however, has not yet drawn people's attention. This article explores the potential of applying…
We study sensor networks with energy harvesting nodes. The generated energy at a node can be stored in a buffer. A sensor node periodically senses a random field and generates a packet. These packets are stored in a queue and transmitted using the energy available at that time at the node. For such networks we develop efficient energy management policies. First, for a single node, we obtain policies that are throughput optimal, i.e., the data queue stays stable for the largest possible data rate. Next we obtain energy management policies which minimize the mean delay in the queue. We also comp…
Consciousness of energy saving is increasing in fifth-generation (5G) wireless networks due to the high energy consumption issue. Energy harvesting technology is a possible appealing solution for ultimately prolonging the lifetime of devices and networks. Although considerable research efforts have been conducted in the context of using energy harvesting technology in 5G wireless networks, these efforts are in their infancy, and a tutorial on this topic is still lacking. This study aims to discuss the beneficial role of energy harvesting technology in 5G networks. We categorize and classify th…
An energy cooperation policy for energy harvesting wireless sensor networks (WSNs) with wireless power transfer is proposed in this paper to balance the energy at each sensor node and increase the total energy utilization ratio of the whole WSNs. Considering the unbalanced spatio-temporal properties of the energy supply across the deployment terrain of energy harvesting WSNs and the dynamic traffic load at each sensor node, the energy cooperation problem among sensor nodes is decomposed into two steps: the local energy storage at each sensor node based on its traffic load to meet its own needs…
The broadcast nature of the wireless medium allows unintended users to eavesdrop the confidential information transmission. In this regard, we investigate the problem of secure communication between a source and a destination via a wireless energy harvesting untrusted node which acts as a helper to relay the information; however, the source and destination nodes wish to keep the information confidential from the relay node. To realize the positive secrecy rate, we use destination-assisted jamming. Being an energy-starved node, the untrusted relay harvests energy from the received radio frequen…
Vehicle electronic systems currently utilize wired networks for power delivery (from the main battery) and communication (e.g., LIN, CAN, FlexRay) between nodes. Wired networks cannot practically accommodate nodes in moving parts (e.g., tires) and with the increasing functional complexity in vehicles, they require kilometer-long harnesses, significantly increasing fuel consumption and manufacturing and design costs. As an alternative, energy harvesting intra-vehicular wireless sensor networks (IVWSN) can accommodate nodes in all locations and they obviate the need for wiring, significantly low…
Capillary wireless sensor networks devoted to air quality monitoring have provided vital information on dangerous air conditions. In adopting the environmentally generated energy as the fundamental energy source the main challenge is the implementation of capillary networks rather than replacing the batteries on a set period of times that leads to functional dilemma of devices management and high costs. In this paper we present a battery-less, self-governing, multi-parametric sensing platform for air quality monitoring that harvests environment energy for long run. Furthermore study on sensor …
We consider a spectrum sharing scenario, where a secondary network coexists with a primary network of multiple transceivers. The secondary network consists of an energy-constrained decode-and-forward secondary relay which assists the communication between a secondary transmitter and a destination in the presence of the interference from multiple primary transmitters. The secondary relay harvests energy from the received radio-frequency signals, which include the information signal from the secondary transmitter and the primary interference. The harvested energy is then used to decode the secon…
This paper advocates the use of the emerging distributed compressive sensing (DCS) paradigm in order to deploy energy harvesting (EH) wireless sensor networks (WSN) with practical network lifetime and data gathering rates that are substantially higher than the state-of-the-art. In particular, we argue that there are two fundamental mechanisms in an EH WSN: i) the energy diversity associated with the EH process that entails that the harvested energy can vary from sensor node to sensor node, and ii) the sensing diversity associated with the DCS process that entails that the energy consumption ca…
Towards Battery-Free Wireless Sensing via Radio-Frequency Energy Harvesting
City University of Hong Kong（香港城市大学）；Shandong University（山东大学）；Delft University of Technology（代尔夫特理工大学）；University at Buffalo, SUNY（纽约州立大学布法罗分校）；Macquarie University（麦考瑞大学）
We consider an energy harvesting source that is collecting measurements from a physical phenomenon and sending updates to a destination within a communication session time. Updates incur transmission delays that are function of the energy used in their transmission. The more transmission energy used per update, the faster it reaches the destination. The goal is to transmit updates in a timely manner, namely, such that the total age of information is minimized by the end of the communication session, subject to energy causality constraints. We consider two variations of this problem. In the fir…
The design of Medium Access Control (MAC) protocols for wireless sensor networks (WSNs) has been conventionally tackled by assuming battery-powered devices and by adopting the network lifetime as the main performance criterion. While WSNs operated by energy-harvesting (EH) devices are not limited by network lifetime, they pose new design challenges due to the uncertain amount of harvestable energy. Novel design criteria are thus required to capture the trade-offs between the potentially infinite network lifetime and the uncertain energy availability. This paper addresses the analysis and desig…
Nanoscale wireless networks are expected to revolutionize a variety of domains, with significant advances conceivable in in-body healthcare. In healthcare, these nanonetworks will consist of energy-harvesting nanodevices passively flowing through the bloodstream, taking actions at certain locations, and communicating results to more powerful Body Area Network (BAN) nodes. Assuming such a setup and electromagnetic nanocommunication in the Terahertz (THz) frequencies, we propose a network architecture that can support fine-grained localization of the energy-harvesting in-body nanonodes, as well …
In this letter, we investigate the security of a single-antenna rechargeable source node in the presence of a multi-antenna rechargeable cooperative jammer and a potential single-antenna eavesdropper. The batteries at the legitimate transmitting nodes (i.e. the source node and the jamming node) are assumed to be limited in capacity and are modeled as queueing systems. We investigate the impact of the energy arrival rates at the batteries on the achievable secrecy rates. In our energy-constrained network, we propose an efficient scheme to enhance the system's security by optimizing the transmis…
For Industrial Wireless Sensor Networks, it is essential to reliably sense and deliver the environmental data on time to avoid system malfunction. While energy harvesting is a promising technique to extend the lifetime of sensor nodes, it also brings new challenges for system reliability due to the stochastic nature of the harvested energy. In this paper, we investigate the optimal energy management policy to minimize the weighted packet loss rate under delay constraint, where the packet loss rate considers the lost packets both during the sensing and delivering processes. We show that the abo…
Wireless systems comprised of rechargeable nodes have a significantly prolonged lifetime and are sustainable. A distinct characteristic of these systems is the fact that the nodes can harvest energy throughout the duration in which communication takes place. As such, transmission policies of the nodes need to adapt to these harvested energy arrivals. In this paper, we consider optimization of point-to-point data transmission with an energy harvesting transmitter which has a limited battery capacity, communicating in a wireless fading channel. We consider two objectives: maximizing the throughp…
Age of Information (AoI) is a newly appeared concept and metric to characterize the freshness of data. In this work, we study the delay and AoI in a multiple access channel (MAC) with two source nodes transmitting different types of data to a common destination. The first node is grid-connected and its data packets arrive in a bursty manner, and at each time slot it transmits one packet with some probability. Another energy harvesting (EH) sensor node generates a new status update with a certain probability whenever it is charged. We derive the delay of the grid-connected node and the AoI of t…
LoRa networks have been deployed all over the world and are a major enabling wireless technology for the Internet of Things (IoT). Massive connectivity applications such as smart metering, agriculture, and supply chain \& logistics are most suitable for LoRa deployments due to their long range, low cost, and low power features. Meanwhile, energy harvesting technologies that extract energy from ambient sources have enabled the battery-less operation of many small wireless sensors. This paper studies the merger of these two technologies and mathematically models device and network performance us…
We investigate an energy-harvesting wireless sensor transmitting latency-sensitive data over a fading channel. The sensor injects captured data packets into its transmission queue and relies on ambient energy harvested from the environment to transmit them. We aim to find the optimal scheduling policy that decides whether or not to transmit the queue's head-of-line packet at each transmission opportunity such that the expected packet queuing delay is minimized given the available harvested energy. No prior knowledge of the stochastic processes that govern the channel, captured data, or harvest…
Numerous energy harvesting wireless devices that will serve as building blocks for the Internet of Things (IoT) are currently under development. However, there is still only limited understanding of the properties of various energy sources and their impact on energy harvesting adaptive algorithms. Hence, we focus on characterizing the kinetic (motion) energy that can be harvested by a wireless node with an IoT form factor and on developing energy allocation algorithms for such nodes. In this paper, we describe methods for estimating harvested energy from acceleration traces. To characterize th…
In energy harvesting communications, users transmit messages using energy harvested from nature during the course of communication. With an optimum transmit policy, the performance of the system depends only on the energy arrival profiles. In this paper, we introduce the concept of energy cooperation, where a user wirelessly transmits a portion of its energy to another energy harvesting user. This enables shaping and optimization of the energy arrivals at the energy-receiving node, and improves the overall system performance, despite the loss incurred in energy transfer. We consider several ba…
We consider the effects of decoding costs in energy harvesting communication systems. In our setting, receivers, in addition to transmitters, rely solely on energy harvested from nature, and need to spend some energy in order to decode their intended packets. We model the decoding energy as an increasing convex function of the rate of the incoming data. In this setting, in addition to the traditional energy causality constraints at the transmitters, we have the decoding causality constraints at the receivers, where energy spent by the receiver for decoding cannot exceed its harvested energy. W…
We propose a simple yet efficient scheme for a set of energy-harvesting sensors to establish secure communication with a common destination (a master node). An eavesdropper attempts to decode the data sent from the sensors to their common destination. We assume a single modulation scheme that can be implemented efficiently for energy-limited applications. We design a multiple-access scheme for the sensors under secrecy and limited-energy constraints. In a given time slot, each energy-harvesting sensor chooses between sending its packet or remaining idle. The destination assigns a set of data t…
By enabling wireless devices to be charged wirelessly and remotely, radio frequency energy harvesting (RFEH) has become a promising technology to power the unattended Internet of Things (IoT) low-power devices. To enable this, in future IoT networks, besides the conventional data access points (DAPs) responsible for collecting data from IoT devices, energy access points (EAPs) should be deployed to transfer radio frequency (RF) energy to IoT devices to maintain their sustainable operations. In practice, the DAPs and EAPs may be operated by different operators and a DAP should provide certain i…
We consider cooperative communications with energy harvesting (EH) relays, and develop a distributed power control mechanism for the relaying terminals. Unlike prior art which mainly deal with single-relay systems with saturated traffic flow, we address the case of bursty data arrival at the source cooperatively forwarded by multiple half-duplex EH relays. We aim at optimizing the long-run average delay of the source packets under the energy neutrality constraint on power consumption of each relay. While EH relay systems have been predominantly optimized using either offline or online methodol…
