Technological advances in the Internet of Things (IoT) have lead the way for technology to be used in ways that were never possible before. Through the development of devices with low-power radios, Wireless Sensor Networks (WSN) can be configured for almost any type of application. Agricultural has been one example where IoT and WSN have been able to increase productivity, efficiency, and output yield. Systems that previously required manual operation can be easily replaced with sensors and actuators to automate the process such as irrigation and disease management. Powering these devices is a concern as batteries are often required due to devices being located where electricity is not readily available. In this paper, a comparison is performed between three wireless technologies: IEEE 802.15.4 (Zigbee), Long Range Wireless Area Network (LoRaWAN), and IEEE 802.11g (WiFi 2.4~GHz) for agricultural monitoring with energy harvesting capabilities. According to experimental results, LoRaWAN is the optimal technology to use in an agricultural monitoring system where power consumption and network lifetime are a priority. The experimental results can be used for the selection of wireless technology for agricultural monitoring following application requirements.
In the Internet of Things (IoT), thousands of devices can be deployed to acquire data from the environment and provide service to several applications in different fields. In many cases, it is desirable that devices are self-sustainable in terms of energy. Therefore,the research community is exploring the possibility of employing battery-less devices, where the energy is derived solely from external and/or environmental sources, such as solar panels. In this work, we propose an ns-3 model of a (super) capacitor, which can be used as the storage of the harvested energy in a battery-less IoT dev…
Numerous energy harvesting wireless devices that will serve as building blocks for the Internet of Things (IoT) are currently under development. However, there is still only limited understanding of the properties of various energy sources and their impact on energy harvesting adaptive algorithms. Hence, we focus on characterizing the kinetic (motion) energy that can be harvested by a wireless node with an IoT form factor and on developing energy allocation algorithms for such nodes. In this paper, we describe methods for estimating harvested energy from acceleration traces. To characterize th…
Indoor beacon system is a cornerstone of internet of things. Until now, most of the research effort has focused on achieving various applications based on beacon communication. However, the power consumption on beacon devices becomes the bottleneck for the large-scale deployments of indoor networks. On one hand, the size of beacon devices is required to be small enough for easy deployment, which further limits the size of battery. On the other hand, replacing the batteries of the beacon devices could lead to high maintenance costs. It is important to provide them with full energy autonomy. To …
By enabling wireless devices to be charged wirelessly and remotely, radio frequency energy harvesting (RFEH) has become a promising technology to power the unattended Internet of Things (IoT) low-power devices. To enable this, in future IoT networks, besides the conventional data access points (DAPs) responsible for collecting data from IoT devices, energy access points (EAPs) should be deployed to transfer radio frequency (RF) energy to IoT devices to maintain their sustainable operations. In practice, the DAPs and EAPs may be operated by different operators and a DAP should provide certain i…
Energy harvesting technologies offer a promising solution to sustainably power an ever-growing number of Internet of Things (IoT) devices. However, due to the weak and transient natures of energy harvesting, IoT devices have to work intermittently rendering conventional routing policies and energy allocation strategies impractical. To this end, this paper, for the very first time, developed a distributed multi-agent reinforcement algorithm known as global actor-critic policy (GAP) to address the problem of routing policy and energy allocation together for the energy harvesting powered IoT syst…
The sustainable Internet of Things (IoT) is becoming a promising solution for the green living and smart industries. In this article, we investigate the practical issues in the radio energy harvesting and data communication systems through extensive field experiments. A number of important characteristics of energy harvesting circuits and communication modules have been studied, including the non-linear energy consumption of the communication system relative to the transmission power, the wake-up time associated with the payload, and the varying system power during consecutive packet transmiss…
Intensive research on energy harvested sensor nodes with traditional battery powered devices has been driven by the challenges in achieving the stringent design goals of battery lifetime, information accuracy, transmission distance, and cost. This challenge is further amplified by the inherent power intensive nature of long-range communication when sensor networks are required to span vast areas such as agricultural fields and remote terrain. Solar power is a common energy source is wireless sensor nodes, however, it is not reliable due to fluctuations in power stemming from the changing seaso…
The ever-evolving internet of things (IoT) has led to the growth of numerous wireless sensors, communicating through the internet infrastructure. When designing a network using these sensors, one critical aspect is the longevity and self-sustainability of these devices. For extending the lifetime of these sensors, radio frequency energy harvesting (RFEH) technology has proved to be promising. In this paper, we propose CURE, a novel framework for RFEH that effectively combines the benefits of cell-free massive MIMO (CFmMIMO), unmanned aerial vehicles (UAVs), and reconfigurable intelligent surfa…
Internet of Things (IoT) devices can apply mobile-edge computing (MEC) and energy harvesting (EH) to provide the satisfactory quality of experiences for computation intensive applications and prolong the battery lifetime. In this article, we investigate the computation offloading for IoT devices with energy harvesting in wireless networks with multiple MEC devices such as base stations and access points, each with different computation resource and radio communication capability. We propose a reinforcement learning based computation offloading framework for an IoT device to choose the MEC devi…
The agricultural sector is still lagging behind from all other sectors in terms of using the newest technologies. For production, the latest machines are being introduced and adopted. However, pre-harvest and post-harvest processing are still done by following traditional methodologies while tracing, storing, and publishing agricultural data. As a result, farmers are not getting deserved payment, consumers are not getting enough information before buying their product, and intermediate person/processors are increasing retail prices. Using blockchain, smart contracts, and IoT devices, we can fu…
Age of Information in Non-Terrestrial Networks with Energy Harvesting
ZJU-UIUC Institute, Zhejiang University（浙江大学中法联合学院）；Department of Computer and Information Science, Linkoping University（林雪平大学计算机与信息科学系）；National Mobile Communications Research Laboratory, Southeast University（东南大学移动通信国家重点实验室）
Ambient radio frequency (RF) energy harvesting (EH) technology is key to realize self-sustainable, always-on, low-power, massive Internet of Things networks. Typically, rigid (non-adaptable to channel fluctuations) multi-antenna receive architectures are proposed to support reliable EH operation. Herein, we introduce a dynamic RF combining architecture for ambient RF EH use cases, and exemplify the attainable performance gains via three simple phase shifts' exploration mechanisms, namely, brute force (BF), sequential testing (ST) and codebook based (CB). Among the proposed mechanisms, BF deman…
LoRa networks have been deployed all over the world and are a major enabling wireless technology for the Internet of Things (IoT). Massive connectivity applications such as smart metering, agriculture, and supply chain \& logistics are most suitable for LoRa deployments due to their long range, low cost, and low power features. Meanwhile, energy harvesting technologies that extract energy from ambient sources have enabled the battery-less operation of many small wireless sensors. This paper studies the merger of these two technologies and mathematically models device and network performance us…
With the growing number of deployments of Internet of Things (IoT) infrastructure for a wide variety of applications, the battery maintenance has become a major limitation for the sustainability of such infrastructure. To overcome this problem, energy harvesting offers a viable alternative to autonomously power IoT devices, resulting in a number of battery-less energy harvesting IoTs (or EH-IoTs) appearing in the market in recent years. Standards activities are also underway, which involve wireless protocol design suitable for EH-IoTs as well as testing procedures for various energy harvesting…
Timely status updates are crucial to enabling applications in massive Internet of Things (IoT). This paper measures the data-freshness performance of a status update system with an energy harvesting transmitter, considering the randomness in information generation, transmission and energy harvesting. The performance is evaluated by a non-linear function of age of information (AoI) that is defined as the time elapsed since the generation of the most up-to-date status information at the receiver. The system is formulated as two queues with status packet generation and energy arrivals both assume…
The emerging Internet of Things (IoT)-driven ultra-dense small cell networks (UD-SCNs) will need to combat a variety of challenges. On one hand, massive number of devices sharing the limited wireless resources will render centralized control mechanisms infeasible due to the excessive cost of information acquisition and computations. On the other hand, to reduce energy consumption from fixed power grid and/or battery, many IoT devices may need to depend on the energy harvested from the ambient environment (e.g., from RF transmissions, environmental sources). However, due to the opportunistic na…
There is an increasing demand for intelligent processing on emerging ultra-low-power internet of things (IoT) devices, and recent works have shown substantial efficiency boosts by executing inference tasks directly on the IoT device (node) rather than merely transmitting sensor data. However, the computation and power demands of Deep Neural Network (DNN)-based inference pose significant challenges for nodes in an energy-harvesting wireless sensor network (EH-WSN). Moreover, these tasks often require responses from multiple physically distributed EH sensor nodes, which imposes crucial system op…
LoRa Communication for Agriculture 4.0: Opportunities, Challenges, and Future Directions
College of Engineering, United Arab Emirates University（阿联酋大学工程学院）；College of Electronics and Information Engineering, Tongji University（同济大学电子与信息工程学院）；King Abdullah University of Science And Technology（阿卜杜拉国王科技大学）
Wireless Energy Transfer (WET) is a promising solution for powering massive Internet of Things deployments. An important question is whether the costly Channel State Information (CSI) acquisition procedure is necessary for optimum performance. In this paper, we shed some light into this matter by evaluating CSI-based and CSI-free multi-antenna WET schemes in a setup with WET in the downlink, and periodic or Poisson-traffic Wireless Information Transfer (WIT) in the uplink. When CSI is available, we show that a maximum ratio transmission beamformer is close to optimum whenever the farthest node…
Chongqing University of Posts and Telecommunications（重庆邮电大学）；Anqing Normal University（安庆师范大学）；Nanyang Technological University（南洋理工大学）
The combination of energy harvesting (EH), cognitive radio (CR), and non-orthogonal multiple access (NOMA) is a promising solution to improve energy efficiency and spectral efficiency of the upcoming beyond fifth generation network (B5G), especially for support the wireless sensor communications in Internet of things (IoT) system. However, how to realize intelligent frequency, time, and energy resource allocation to support better performances is an important problem to be solved. In this paper, we study joint spectrum, energy, and time resource management for the EH-CR-NOMA IoT systems. Our g…
