Composites are ideally suited to achieve desirable multifunctional effective properties since the best properties of different materials can be judiciously combined with designed microstructures. Here we establish cross-property relations for two-phase composite media that link effective elastic and electromagnetic wave characteristics to one another, including the respective effective wave speeds and attenuation coefficients, which facilitate multifunctional material design. This is achieved by deriving accurate formulas for the effective electromagnetic and elastodynamic properties that depend on the wavelengths of the incident waves and the microstructure via the spectral density. Our formulas enable us to explore the wave characteristics of a broad class of disordered microstructures because they apply, unlike conventional formulas, for a wide range of incident wavelengths, i.e., well beyond the long-wavelength regime. This capability enables us to study the dynamic properties of exotic disordered ``hyperuniform'' composites that can have advantages over crystalline ones, such as nearly optimal, direction-independent properties and robustness against defects. We specifically show that disordered ``stealthy'' hyperuniform microstructures exhibit novel wave characteristics, e.g., low-pass filters that transmit waves ``isotropically'' up to a finite wavenumber. Our cross-property relations for the effective wave characteristics can be applied to design multifunctional composites via inverse techniques. Design examples include structural components that require high stiffness and electromagnetic absorption, heat-sinks for CPUs, and sound-absorbing housings for motors that have to efficiently emit thermal radiation and suppress mechanical vibrations, and nondestructive evaluation of the elastic moduli of materials from the effective dielectric response.
Soft materials with a liquid component are an emerging paradigm in materials design. The incorporation of a liquid phase, such as water, liquid metals, or complex fluids, into solid materials imparts unique properties and characteristics that emerge as a result of the dramatically different properties of the liquid and solid. Especially in recent years, this has led to the development and study of a range of novel materials with new functional responses, with applications in topics including soft electronics, soft robotics, 3D printing, wet granular systems and even in cell biology. Here we pr…
Soft electronics are a promising and revolutionary alternative for traditional electronics when safe physical interaction between machines and the human body is required. Among various materials architectures developed for producing soft and stretchable electronics, Liquid-Metal Embedded Elastomers (LMEEs), which contain Ga-based inclusions as a conductive phase, has drawn considerable attention in various emerging fields such as wearable computing and bio-inspired robotics. This is because LMEEs exhibit a unique combination of desirable mechanical, electrical, and thermal properties. For inst…
We study the elastic response of composites of rods embedded in elastic media. We calculate the micro-mechanical response functions, and bulk elastic constants as functions of rod density. We find two fixed points for Poisson's ratio with respect to the addition of rods in 3D composites: there is an unstable fixed point for Poisson's ratio=1/2 (an incompressible system) and a stable fixed point for Poisson's ratio=1/4 (a compressible system). We also derive an approximate expression for the elastic constants for arbitrary rod density that yields exact results for both low and high density. The…
Investigation of inhomogeneities has wide applications in different areas of mechanics including the study of composite materials. Here, we analytically study an arbitrarily-shaped isotropic inhomogeneity embedded in a finite-sized heterogeneous medium. By modal decomposition of the influence of the inhomogeneity on the deformation of the composite, a relation is presented that determines the variation of effective elastic stiffness caused by the presence of the inhomogeneity. This relation indicates that the effective elastic stiffness of a composite is always a concave function of the proper…
We report detailed theoretical investigations of the micro-mechanics and bulk elastic properties of composites consisting of randomly distributed stiff fibers embedded in an elastic matrix in two and three dimensions. Recent experiments published in Physical Review Letters [102, 188303 (2009)] have suggested that the inclusion of stiff microtubules in a softer, nearly incompressible biopolymer matrix can lead to emergent compressibility. This can be understood in terms of the enhancement of the compressibility of the composite relative to its shear compliance as a result of the addition of sti…
We derive exact expressions for effective elastodynamic properties of two-phase composites in the long-wavelength (quasistatic) regime via homogenized constitutive relations that are local in space. This is accomplished by extending the "strong-contrast" expansion formalism that was previously applied to the static problem. These strong-contrast expansions explicitly incorporate complete microstructural information of the composite via an infinite set of $n$-point correlation functions. Utilizing the rapid-convergence properties of these series expansions (even for extreme contrast ratios), we…
Motivated by recent experiments showing nonlinear elasticity of in vitro networks of the biopolymer actin cross-linked with filamin, we present an effective medium theory of flexibly cross-linked stiff polymer networks. We model such networks by randomly oriented elastic rods connected by flexible connectors to a surrounding elastic continuum, which self-consistently represents the behavior of the rest of the network. This model yields a crossover from a linear elastic regime to a highly nonlinear elastic regime that stiffens in a way quantitatively consistent with experiment.
Very recently, the construction of twist actuators from magnetorheological gels and elastomers has been suggested. These materials consist of magnetizable colloidal particles embedded in a soft elastic polymeric environment. The twist actuation is enabled by a net chirality of the internal particle arrangement. Upon magnetization by a homogeneous external magnetic field, the systems feature an overall torsional deformation around the magnetization direction. Starting from a discrete minimal mesoscopic model set-up we work towards a macroscopic characterization. The two scales are linked by ide…
Conducting polymers have wide technological applications in sensors, actuators, electric and optical devices, solar cells etc. To improve their operational performance, mechanical, thermal, electrical and optical properties, such polymers are doped with carbon allotrope nanofillers. Functionality of the novel nanocomposite polymers may be stipulated by size characteristics of nanoparticles and the polymer, different physical effects like charge transfer in such objects etc. We characterize and analyze structure, elastic, electric properties and of novel polymer nanocomposites, isotactic polypr…
The importance of surface tension effects is being recognized in the context of soft composite solids, where it is found to significantly affect the mechanical properties, such as the elastic response to an external stress. It has recently been discovered that Eshelby's inclusion theory breaks down when the inclusion size approaches the elastocapillary length $L\equivγ/E$, where $γ$ is the inclusion/host surface tension and $E$ is the host Young's modulus. Extending our recent results for liquid inclusions, here we model the elastic behavior of a non-dilute distribution of isotropic elastic sp…
Deformation due to embedded fluidic networks is currently studied in the context of soft-actuators and soft-robotics. Expanding on this concept, beams can be designed so that the pressure in the channel-network is created directly from external forces acting on the beam, and thus can be viewed as passive solid-liquid composite structure. We obtain a continuous function relating the network geometry to the deformation. This enables design of networks creating arbitrary steady and time varying deformation-fields as well as to eliminate deformation created by external forces.
Short fiber reinforced polymer composites have found extensive industrial and engineering applications owing to their unique combination of low cost, relatively easy processing and superior mechanical properties compared to their parent polymers. In this study, a coarse grained (CG) model of cross linked carbon nanotube (CNT) reinforced polymer matrix composites is developed. A characteristic feature of the CG model is the ability to capture the interactions between polymer chains, and nanotubes and polymer matrix. The dependence of the elastic properties of the composites on the mole fraction…
Eshelby's theory is the foundation of composite mechanics, allowing calculation of the effective elastic moduli of composites from a knowledge of their microstructure. However it ignores interfacial stress and only applies to very dilute composites -- i.e. where any inclusions are widely spaced apart. Here, within the framework of the Mori-Tanaka multiphase approximation scheme, we extend Eshelby's theory to treat a composite with interfacial stress in the non-dilute limit. In particular we calculate the elastic moduli of composites comprised of a compliant, elastic solid hosting a non-dilute …
Mixing colloid shapes with distinctly different anisotropy generates composite nematics in which the order of the individual components can be fundamentally different. In colloidal rod-disk mixtures or hybrid nematics composed of anisotropic colloids immersed in a thermotropic liquid crystal, one of the components may adopt so-called anti-nematic order while the other exhibits conventional nematic alignment. Focussing on simple models for hard rods and disks, we employ Onsager-Straley's second-virial theory to derive scaling expressions for the elastic moduli of rods and disks in both nematic …
One possibility to adjust material properties to a specific need is to embed units of one substance into a matrix of another substance. Even materials that are readily tunable during operation can be generated in this way. In (visco)elastic substances, both the matrix material as well as the inclusions and/or their immediate environment can be dynamically deformed. If the typical dynamic response time of the inclusions and their surroundings approach the macroscopic response time, their deformation processes need to be included into a dynamic macroscopic characterization. Along these lines, we…
We consider an elastic composite material containing particulate inclusions in a soft elastic matrix that is bounded by a rigid wall, e.g., the substrate. If such a composite serves as a soft actuator, forces are imposed on or induced between the embedded particles. We investigate how the presence of the rigid wall affects the interactions between the inclusions in the elastic matrix. For no-slip boundary conditions, we transfer Blake's derivation of a corresponding Green's function from low-Reynolds-number hydrodynamics to the linearly elastic case. Results for no-slip and free-slip surface c…
Many biological materials consist of sparse networks of disordered fibres, embedded in a soft elastic matrix. The interplay between rigid and soft elements in such composite networks leads to mechanical properties that can go far beyond the sum of those of the constituents. Here we present lattice-based simulations to unravel the microscopic origins of this mechanical synergy. We show that the competition between fibre stretching and bending and elastic deformations of the matrix gives rise to distinct mechanical regimes, with phase transitions between them that are characterized by critical b…
This work studies the constitutive response of two- and three-dimensional lattice materials subject to isotropic prestress. The unit cell of the examined lattices is formed by an arbitrary number of junctions attached to a junction. Analytic formulae for second-order elastic constants and elastic stiffness coefficients of stretching-dominated lattices are provided. In addition, numerical results for the incremental elastic moduli of composite lattices equipped with hard and soft rods are presented. The given results highlight that isotropically pre-tensioned lattices may exhibit marked variati…
In this paper we apply the methodology based on the analysis of changes in acoustic wave velocities under static stress for measurements of the third-order elastic moduli in three polystyrene-based nanocomposites with different fillers: SiO2 particles, halloysite natural tubules, and carbon black particles. The samples were fabricated by the same technology and our data provide information on relative changes of nonlinear properties of the composites caused by addition of the fillers. The data obtained for composites are compared with that for commercial grade polystyrene. The substantial vari…
Euler buckling is the elastic instability of a column subjected to longitudinal compression forces at its ends. The buckling instability occurs when the compressing load reaches a critical value and an infinitesimal fluctuation leads to a large amplitude deflection. Since Euler's original study, this process has been extensively studied in homogeneous, isotropic, linear-elastic solids. Here, we examine the nature of the buckling in inhomogeneous soft composite materials. In particular, we consider a soft host with liquid inclusions both large and small relative to the elastocapillarity length,…
Polymer architecture plays critical roles in both bulk rheological properties and microscale macromolecular dynamics in entangled polymer solutions and composites. Ring polymers, in particular, have been the topic of much debate due to the inability of the celebrated reptation model to capture their observed dynamics. Macrorheology and differential dynamic microscopy (DDM) are powerful methods to determine entangled polymer dynamics across scales, yet they typically require different samples under different conditions, preventing direct coupling of bulk rheological properties to the underlying…
