By using highly entangled states, quantum metrology guarantees precision impossible with classical measurements. Unfortunately such states can be very susceptible to noise, and it is a great challenge of the field to maintain quantum advantage in realistic conditions. In this study we investigate the practicality of graph states for quantum metrology. Graph states are a natural resource for much of quantum information, and here we characterize their quantum Fisher information (QFI) for an arbitrary graph state. We then construct families of graph states which approximately achieves the Heisenberg limit, we call these states bundled graph states. We demonstrate that bundled graph states maintain a quantum advantage after being subjected to iid dephasing or finite erasures. This shows that these graph states are good resources for robust quantum metrology. We also quantify the number of n qubit stabilizer states that are useful as a resource for quantum metrology.
Weak-value amplification (WVA) provides a way for amplified detection of a tiny physical signal at the expense of a lower detection probability. Despite this trade-off, due to its robustness against certain types of noise, WVA has advantages over conventional measurements in precision metrology. Moreover, it has been shown that WVA-based metrology can reach the Heisenberg-limit using entangled resources, but preparing macroscopic entangled resources remains challenging. Here we demonstrate a novel WVA scheme based on iterative interactions, achieving the Heisenberg-limited precision scaling wi…
We consider a cryptographically motivated framework for quantum metrology in the presence of a malicious adversary. We begin by devising an estimation strategy for a (potentially) altered resource (due to a malicious adversary) and quantify the amount of bias and the loss in precision as a function of the introduced uncertainty in the resource. By incorporating an appropriate cryptographic protocol, the uncertainty in the resource can be bounded with respect to the soundness of the cryptographic protocol. Thus the effectiveness of the quantum metrology problem can be directly related to the ef…
We establish the nonclassicality of continuous-variable states as a resource for quantum metrology. Based on the quantum Fisher information of multimode quadratures, we introduce the metrological power as a measure of nonclassicality with a concrete operational meaning of displacement sensitivity beyond the classical limit. This measure belongs to the resource theory of nonclassicality, which is nonincreasing under linear optical elements. Our Letter reveals that a single copy, highly nonclassical quantum state is intrinsically advantageous when compared to multiple copies of a quantum state w…
Quantum number-path entanglement is a resource for super-sensitive quantum metrology and in particular provides for sub-shotnoise or even Heisenberg-limited sensitivity. However, such number-path entanglement has thought to have been resource intensive to create in the first place --- typically requiring either very strong nonlinearities, or nondeterministic preparation schemes with feed-forward, which are difficult to implement. Recently in [Phys. Rev. Lett. 114, 170802 (2015)] we showed that number-path entanglement from a BosonSampling inspired interferometer can be used to beat the shot-no…
We have investigated high-precision measurements, beyond the standard quantum limit, utilizing non-classical states. Although entanglement has been considered a resource for achieving the Heisenberg limit in measurements, we show that any advantage expected from using entanglement is dependent on the measurement in question. We investigate several measurement scenarios and illustrate the role of entanglement as a resource for quantum high-precision measurement. In particular, we demonstrate that there is a regime wherein entanglement not only does not help, but prevents the achievement of the …
We investigate the utility of non classical states of simple harmonic oscillators (a superposition of coherent states) for sensitive force detection. We find that like squeezed states a superposition of coherent states allows the detection of displacement measurements at the Heisenberg limit. Entangling many superpositions of coherent states offers a significant advantage over a single mode superposition states with the same mean photon number.
Quantum resources, such as entanglement, can decrease the uncertainty of a parameter-estimation procedure beyond what is classically possible. This phenomenon is well described for noiseless systems with asymptotically many measurement resources by the Quantum Cramer-Rao Bound, but no general description exists for the regime of limited measurement resources. We address this problem by defining a Bayesian quantifier for uncertainty suitable for the regime of limited resources, and by developing a mathematical description for a parameter-estimation procedure which uses qubit probes to estimate …
Graph states are a unique resource for quantum information processing, such as measurement-based quantum computation. Here, we theoretically investigate using continuous-variable graph states for single-parameter quantum metrology, including both phase and displacement sensing. We identified the optimal graph states for the two sensing modalities and showed that Heisenberg scaling of the accuracy for both phase and displacement sensing can be achieved with local homodyne measurements.
For the last 20 years, the question of what are the fundamental capabilities of quantum precision measurements has sparked a lively debate throughout the scientific community. Typically, the ultimate limits in quantum metrology are associated with the notion of the Heisenberg limit expressed in terms of the physical resources used in the measurement procedure. Over the years, a variety of different physical resources were introduced, leading to a confusion about the meaning of the Heisenberg limit. Here, we review the mainstream definitions of the relevant resources and introduce the universal…
We demonstrate that a many-body nonlocality is a resource for ultra-precise metrology. This result is achieved by linking the sensitivity of a quantum sensor with a combination of many-body correlation functions that witness the nonlocality. We illustrate our findings with some prominent examples---a collection of spins forming an Ising chain and a gas of ultra-cold atoms in any two-mode configuration.
Quantum metrology offers a quadratic advantage over classical approaches to parameter estimation problems by utilizing entanglement and nonclassicality. However, the hurdle of actually implementing the necessary quantum probe states and measurements, which vary drastically for different metrological scenarios, is usually not taken into account. We show that for a wide range of tasks in metrology, 2D cluster states (a particular family of states useful for measurement-based quantum computation) can serve as flexible resources that allow one to efficiently prepare any required state for sensing,…
We derive a bound on the ability of a linear optical network to estimate a linear combination of independent phase shifts by using an arbitrary non-classical but unentangled input state, thereby elucidating the quantum resources required to obtain the Heisenberg limit with a multi-port interferometer. Our bound reveals that while linear networks can generate highly entangled states, they cannot effectively combine quantum resources that are well distributed across multiple modes for the purposes of metrology: in this sense linear networks endowed with well-distributed quantum resources behave …
Quantum metrology aims to exploit quantum phenomena to overcome classical limitations in the estimation of relevant parameters. We consider a probe undergoing a phase shift $φ$ whose generator is randomly sampled according to a distribution with unknown concentration $κ$, which introduces a physical source of noise. We then investigate strategies for the joint estimation of the two parameters $φ$ and $κ$ given a finite number $N$ of interactions with the phase imprinting channel. We consider both single qubit and multipartite entangled probes, and identify regions of the parameters where simul…
The field of quantum metrology promises measurement devices that are fundamentally superior to conventional technologies. Specifically, when quantum entanglement is harnessed the precision achieved is supposed to scale more favourably with the resources employed, such as system size and the time required. Here we consider measurement of magnetic field strength using an ensemble of spins, and we identify a third essential resource: the initial system polarisation, i.e. the low entropy of the original state. We find that performance depends crucially on the form of decoherence present; for a pla…
Quantum metrology promises improved sensitivity in parameter estimation over classical procedures. However, there is an extensive debate over the question how the sensitivity scales with the resources (such as the average photon number) and number of queries that are used in estimation procedures. Here, we reconcile the physical definition of the relevant resources used in parameter estimation with the information-theoretical scaling in terms of the query complexity of a quantum network. This leads to a completely general optimality proof of the Heisenberg limit for quantum metrology. We give …
Quantum Metrology is one of the most promising application of quantum technologies. The aim of this research field is the estimation of unknown parameters exploiting quantum resources, whose application can lead to enhanced performances with respect to classical strategies. Several physical quantum systems can be employed to develop quantum sensors, and photonic systems represent ideal probes for a large number of metrological tasks. Here we review the basic concepts behind quantum metrology and then focus on the application of photonic technology for this task, with particular attention to ph…
Estimation of physical parameters is a must in almost any part of science and technology. The enhancement of the performances in this task, e.g., beating the standard classical shot-noise limit, using available physical resources is a major goal in metrology. Quantum metrology in closed systems has indicated that entanglement in such systems may be a useful resource. However, it is not yet fully understood whether in open quantum systems such enhancements may still show up. Here, we consider a dissipative (open) quantum system of identical particles in which a parameter of the open dynamics it…
One of the main quests in quantum metrology is to attain the ultimate precision limit with given resources, where the resources are not only of the number of queries, but more importantly of the allowed strategies. With the same number of queries, the restrictions on the strategies constrain the achievable precision. In this work, we establish a systematic framework to identify the ultimate precision limit of different families of strategies, including the parallel, the sequential, and the indefinite-causal-order strategies, and provide an efficient algorithm that determines an optimal strateg…
Quantum entanglement is a resource in quantum metrology that can be distributed to two orthogonal physical quantities for the enhancement of their joint measurement sensitivity, as demonstrated in quantum dense metrology. On the other hand, we can also devote all the quantum resource to phase measurement only for optimum measurement sensitivity. Here, we experimentally implement a dual-beam scheme in an SU(1,1) interferometer for the optimum phase measurement sensitivity. We demonstrate a 3.9-dB improvement in signal-to-noise ratio over the optimum classical method and this is 3-dB better than…
We address the relation between quantum metrological resolution and coherence. We examine this dependence in two manners: we develop a quantum Wiener-Kintchine theorem for a suitable model of quantum ruler, and we compute the Fisher information. The two methods have the virtue of including both the contributions of probe and measurement on an equal footing. We illustrate this approach with several examples of linear and nonlinear metrology. Finally, we optimize resolution regarding coherence as a finite resource.
Quantum metrology is studied in the presence of quantum correlation. The quantum correlation measure based on quantum Fisher information enables us to gain a deeper insight on how quantum correlations are instrumental in setting metrological precision. Our analysis shows that not only the entanglement but also the quantum correlation plays important roles to enhance precision in quantum metrology. Even in the absence of entanglement, quantum correlation can be exploited as the resource to beat standard quantum limit and reach Heisenberg limit in metrology. Clearly unraveling the role of quantu…
We examine a family of intrinsic performance measures in terms of probability distributions that generalize Hellinger distance and Fisher information. They are applied to quantum metrology to assess the uncertainty in the detection of minute changes of physical quantities. We show that different measures lead to contradictory conclusions, including the possibility of arbitrarily small uncertainty for fixed resources. These intrinsic performances are compared with the averaged error in the corresponding estimation problem after single-shot measurements.
Quantum metrology is an auspicious discipline of quantum information which is currently witnessing a surge of experimental breakthroughs and theoretical developments. The main goal of quantum metrology is to estimate unknown parameters as accurately as possible. By using quantum resources as probes, it is possible to attain a measurement precision that would be otherwise impossible using the best classical strategies. For example, with respect to the task of phase estimation, the maximum precision (the Heisenberg limit) is a quadratic gain in precision with respect to the best classical strate…
Quantum metrology exploits quantum correlations in specially prepared entangled or other non-classical states to perform measurements that exceed the standard quantum limit. Typically though, such states are hard to engineer, particularly when larger numbers of resources are desired. As an alternative, this paper aims to establish quantum jump metrology which is based on generalised sequential measurements as a general design principle for quantum metrology and discusses how to exploit open quantum systems to obtain a quantum enhancement. By analysing a simple toy model, we illustrate that par…
Near-optimal quantum metrology with few-qubit measurements
Institute for Advanced Study, Tsinghua University（清华大学高等研究院）；Institute for Quantum Information and Matter, California Institute of Technology（加州理工学院量子信息与物质研究所）；Oratomic（奥拉托米克公司）；Perimeter Institute for Theoretical Physics（理论物理珀蒂默研究所）；University of Waterloo（滑铁卢大学）
We study the sensitivity of phase estimation in a lossy Mach-Zehnder interferometer (MZI) using two general, and practical, resources generated by a laser and a nonlinear optical medium with passive optimal elements, which are readily available in the laboratory: One is a two-mode separable coherent and squeezed vacuum state at a beam splitter and the other is a two-mode squeezed vacuum state. In view of the ultimate precision given by quantum Fisher information, we show that the two-mode squeezed vacuum state can achieve a lower bound of estimation error than the coherent and squeezed vacuum …
Quantum number-path entanglement is a resource for super-sensitive quantum metrology and in particular provides for sub-shotnoise or even Heisenberg-limited sensitivity. However, such number-path entanglement has thought to have been resource intensive to create in the first place --- typically requiring either very strong nonlinearities, or nondeterministic preparation schemes with feed-forward, which are difficult to implement. Very recently, arising from the study of quantum random walks with multi-photon walkers, as well as the study of the computational complexity of passive linear optica…
In this article we study the role that quantum resources play in quantum error correction assisted quantum metrology (QECQM) schemes. We show that there exist classes of such problems where entanglement is not necessary to retrieve noise free evolution and Heisenberg scaling in the long time limit. Over short time scales, noise free evolution is also possible even without any form of quantum correlations. In particular, for qubit probes, we show that whenever noise free quantum metrology is possible via QECQM, entanglement free schemes over long time scales and correlation free schemes over sh…
We examine quantum detection via a Michelson interferometer embedded in a gas with Kerr nonlinearity. This nonlinear interferometer is illuminated by pulses of classical light. This strategy combines the robustness against practical imperfections of classical light with the improvement provided by nonlinear processes. Regarding ultimate quantum limits, we stress that, as a difference with linear schemes, the nonlinearity introduces pulse duration as a new variable into play along with the energy resources.
Quantum metrology pursues high-precision measurements of physical quantities by using quantum resources. However, the decoherence generally hinders its performance. Previous work found that the metrological error tends to diverge in the long-encoding-time regime due to the Born-Markovian approximate decoherence, which is called the no-go theorem of noisy quantum metrology. Here we propose a Gaussian quantum metrology scheme using bimodal quantized optical fields as the quantum probe. It achieves the precision of a sub-Heisenberg limit in the ideal case. However, the Markovian decoherence cause…
The nonclassical properties of quantum states are of tremendous interest due to their potential applications in future technologies. It has recently been realized that the concept of a "resource theory" is a powerful approach to quantifying and understanding nonclassicality. To realize the potential of this approach one must first find resource theoretic measures of nonclassicality that are "operational", meaning that they also quantify the ability of quantum states to provide enhanced performance for specific tasks, such as precision sensing. Here we achieve a significant milestone in this en…
We discuss the Heisenberg limit in the multiparameter metrology within two different paradigms -- the one, where the measurement is repeated many times (so the Cramér-Rao bound is guaranteed to be asymptotically saturable) and the second one, where all the resources are allocated into one experimental realization (analyzed with the mimimax approach). We investigate the potential advantage of measuring all the parameter simultaneously compared to estimating them individually, while spending the same total amount of resources. We show that in general the existence of such an advantage, its magni…
We introduce the task of anonymous metrology, in which a physical parameter of an object may be determined without revealing the object's location. Alice and Bob share a correlated quantum state, with which one of them probes the object. Upon receipt of the quantum state, Charlie is then able to estimate the parameter without knowing who possesses the object. We show that quantum correlations are resources for this task when Alice and Bob do not trust the devices in their labs. The anonymous metrology protocol moreover distinguishes different kinds of quantum correlations according to the leve…
Geometric bounds on multiparameter Heisenberg scaling in optical metrology with limited squeezed resources
University of Portsmouth（朴茨茅斯大学）；Quantum Science and Technology Hub, University of Portsmouth（朴茨茅斯大学量子科学与技术中心）；Università di Bari（巴里大学）；INFN, Sezione di Bari（意大利国家核物理研究所巴里分部）；Institute of Cosmology and Gravitation, University of Portsmouth（朴茨茅斯大学宇宙学与引力研究所）
We study the precise phase estimation using squeezed states with photon losses present. Our exact quantum Fisher information calculation shows significant quantum enhancement and thus reveals the benchmark for practical quantum metrology in this noisy scenario. However, we find that the existing parity measurement scheme [P.M. Anisimov et al, Phys. Rev. Lett. 104, 103602 (2010)] behaves worse than even classical cases given very small losses, unless we take an appropriate loss dependent phase shift. Using our formulae, the two optimized aspects including the pre-detection phase shift and the c…
We have introduced a measure of Gaussian quantum correlations based on quantum Fisher information. For bipartite Gaussian states the minimum quantum Fisher information due to local unitary evolution on one of the parties reliably quantifies quantum correlation. In quantum metrology the proposed measure becomes the tool to investigate the role of quantum orrelation in setting metrological precision. In particular, a deeper insights can be gained on how quantum correlations are instrumental to enhance metrological precision. Our analysis demonstrates that not only entanglement but also quantum c…
Interacting quantum systems are attracting increasing interest for developing precise metrology. In particular, the realisation that quantum-correlated states and the dynamics of interacting systems can lead to entirely new and unexpected phenomena have initiated an intense research effort to explore interaction-based metrology both theoretically and experimentally. However, the current framework of interaction-based metrology mainly focuses on single-parameter estimations, a demonstration of multiparameter metrology using interactions as a resource was heretofore lacking. Here we demonstrate …
Scaling Enhancement in Quantum Metrology via Indefinite-Time-Direction Encoding
Shanghai Jiao Tong University（上海交通大学）；The University of Hong Kong（香港大学）；Hefei National Laboratory（合肥国家实验室）；Shanghai Research Center for Quantum Sciences（上海量子科学研究中心）
