Through passively emitting excess heat to the outer space, radiative cooling has been demonstrated as an efficient way for energy saving applications. Selective surface with unity emittance only within the atmospheric window as well as zero absorption within the solar spectrum is sought to achieve the best sub-ambient radiative cooling performance during the daytime. In this work, we proposed a bulk radiative cooler consisting of a 1-mm-thick lithium fluoride crystal coated with silver backing, which exhibits a solar absorptance of 4.7% and nearly ideal infrared selectivity with high emission exactly within the atmospheric transmission band (i.e., 8-13 um). Excellent daytime cooling performance was demonstrated in an outdoor test with stagnation temperature below the ambient temperature by 5 K under solar irradiance above 900 W/m2 and a net cooling power of about 60 W/m2 when the cooler is in thermal equilibrium with the ambient. As a bulk material with the highest ultraviolet-visible-near infrared transmittance, lithium fluoride crystal has been widely employed as the optical windows and mirrors in various applications. The proposed simple selective infrared emitter based on lithium fluoride would open up an innovative way to radiatively cool optical systems.
The management of the abundant eggshell biowaste produced worldwide has become a problematic issue due to the generated odor and microorganisms after directly disposing eggshell biowaste in landfills. Herein, we propose a novel method to convert the hazardous eggshell biowaste to valuable resources for energy management applications. Eggshell-based films are fabricated by embedding eggshell powders into polymer matrix to achieve highly efficient sub-ambient daytime radiative cooling. Benefiting from the Mie scattering of eggshell particles/air pores in the solar spectrum and strong emission of…
Daytime radiative cooling is a promising passive cooling technology for combating global warming. Existing daytime radiative coolers usually show whitish colors due to their broadband high solar reflectivity, which severely impedes applications in real-life situations with aesthetic demands and effective display. However, there is a trade-off between vivid colors and high cooling performance because colors are often produced by absorption of visible light, decreasing net cooling power. To break this trade-off, we design multilayered structures with coupled nanocavities and produce structural c…
Radiative cooling is a passive cooling technology by reflecting sunlight and emitting radiation in the atmospheric sky window. Although highly desired, full daytime sub-ambient radiative cooling in commercial-like single-layer particle-matrix paints is yet to be achieved. In this work, we have demonstrated full daytime sub-ambient radiative cooling in CaCO3-acrylic paint by adopting large bandgap fillers, a high particle concentration and a broad size distribution. Our paint shows the highest solar reflectance of 95.5% among paints and a high sky-window emissivity of 0.94. Field tests show coo…
We report a daytime passive radiative cooler using chemically fabricated porous anodic aluminum oxide (AAO) membranes. Effective medium theory (EMT) has been applied to analyzing the optical properties of the air-doped porous medium. The composite structure is specifically optimized so that it has a high absorbance (emittance) in the far-infrared atmospheric window and nearly no loss in the solar spectrum. The calculated emittance is well reproduced in the experiment by our AAO sample. The fabricated porous membrane shows a potential cooling power density of 64 W/m2 at ambient (humidity = 75%)…
Radiative cooling is a passive cooling technology that offers great promises to reduce space cooling cost, combat the urban island effect and alleviate the global warming. To achieve passive daytime radiative cooling, current state-of-the-art solutions often utilize complicated multilayer structures or a reflective metal layer, limiting their applications in many fields. Attempts have been made to achieve passive daytime radiative cooling with single-layer paints, but they often require a thick coating or show partial daytime cooling. In this work, we experimentally demonstrate remarkable full…
Scalable colored sub-ambient radiative coolers based on a polymer-Tamm photonic structure
Zhejiang Provincial Engineering Research Center of Energy Optoelectronic Materials and Devices, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences（中国科学院宁波材料技术与工程研究所）；School of Physical Science and Technology, Ningbo University（宁波大学物理科学与技术学院）；Nano Science and Technology Institute, University of Science and Technology of China（中国科学技术大学纳米科学技术学院）；Jiangsu Key Laboratory of Micro and Nano Heat Fluid Flow Technology and Energy Application, Suzhou University of Science and Technology（苏州科技大学）；Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences（中国科学院西安光学精密机械研究所）
Daytime radiative cooling has attracted considerable attention recently due to its tremendous potential for passively exploiting the coldness of deep-sky as clean and renewable energy. Many advanced materials with novel photonic micro-nanostructures have already been developed to enable highly efficient daytime radiative coolers, among which the flexible hierarchical porous coatings (HPCs) are a more distinguished category. However, it is still hard to precisely control the size distribution of the randomized pores within the HPCs, usually resulting in a deficient solar reflection at the near-…
The exponential growth in population and the increasing global temperature trickles down to an explosive demand in cooling and refrigeration. The vicious cycle of carbon footprint generation by these cooling devices can be broken by a mechanism of passive cooling. This study outlines research undertaken with the aim to design such materials - exhibiting high reflectance in the solar spectrum and high emission in the atmospheric transparency window of 8-13 $μ$m. The Monte Carlo (MC) method is used to simulate light propagation in a composite material aiding the design of metamaterials with thes…
Terrestrial radiative cooling is an intriguing way to mitigate the accelerating cooling demands in the residential and commercial sectors by offering zero-energy cooling. However, the ultra-white or mirror-like appearance of radiative coolers can be visually sterile and raise safety issues when broadly applied to building facades and vehicles. To overcome the fundamental trade-off between color diversity and cooling performance, we propose a radiatively integrated, conductively insulated system that exploits thermal non-equilibrium between colorants and thermal emitters. This allows such radia…
Energy-saving cooling materials with strong operability are desirable towards sustainable thermal management. Inspired by the cooperative thermo-optical effect in fur of polar bear, we develop a flexible and reusable cooling skin via laminating a polydimethylsiloxane film with a highly-scattering polyethylene aerogel. Owing to its high porosity of 97.9% and tailored pore size of 3.8 +- 1.4 micrometers, superior solar reflectance of 0.96 and high transparency to irradiated thermal energy of 0.8 can be achieved at a thickness of 2.7 mm. Combined with low thermal conductivity of 0.032 W/m/K of th…
As an emerging electricity-free cooling technology, radiative cooling employs outer space as the heat sink. With this, a sky-facing thermal emitter is usually required. Due to the black-body radiation limit at ambient temperature, the maximum cooling power density for a single-faced radiative cooling device is ~156.9 W/m2. Here we report a double-sided radiative cooling architecture using graded nanocomposite metamaterials (GNM) designed for a vertically aligned thermal emitter. This GNM structure possesses an optical absorption of over 90% throughout the solar spectrum, and exceeds 90% reflec…
A thermostat senses the temperature of a physical system and switches heating or cooling devices on or off, regulating the flow of heat to maintain the system's temperature near a desired setpoint. Taking advantage of recent advances in radiative heat transfer technologies, here we propose a passive radiative "thermostat" based on phase-change photonic nanostructures for thermal regulation at room temperature. By self-adjusting their visible to mid-IR absorptivity and emissivity responses depending on the ambient temperature, the proposed devices use the sky to passively cool or heat during da…
Radiative cooling is a passive cooling strategy with zero consumption of electricity. Although this technology can work well during optimal atmospheric conditions at nighttime, it is essential to achieve efficient radiative cooling during daytime when peak cooling demand actually occurs. In this article, we report an inexpensive planar polydimethylsiloxane (PDMS)/metal thermal emitter, i.e., a thin film structure fabricated using fast solution coating process that is scalable for large area manufacturing. By manipulating the beaming effect of the thermal radiation, temperature reduction of 9.5…
The regulation of temperature at the macro and microscale is a major energy-consuming process of humankind. Modern cooling systems account for 15% of the global energy consumption and are responsible for 10% of greenhouse gas emissions. Due to global warming, a ten-fold growth in the demand of cooling technologies is expected in the next 30 years, thus linking global warming and cooling needs through a worrying negative feedback loop. Here, we propose an inexpensive solution to this global challenge based on a single-layer of silica microspheres self-assembled on a soda-lime glass substrate. T…
Quantum emitters in van der Waals (vdW) materials have attracted lots of attentions in recent years, and shown great potentials to be fabricated as quantum photonic nanodevices. Especially, the single photon emitter (SPE) in hexagonal boron nitride (hBN) emerges with the outstanding room-temperature quantum performances, whereas the ubiquitous blinking and bleaching restrict its practical applications and investigations critically. The blister in vdW materials possessing stable structure can modify the local bandgap by strains on nanoscale, which is supposed to have the ability to fix this pho…
The radiative cooling of objects during daytime under direct sunlight has recently been shown to be significantly enhanced by utilizing nanophotonic coatings. Multilayer thin film stacks, 2D photonic crystals, etc. as coating structures improved the thermal emission rate of a device in the infrared atmospheric transparency window reducing considerably devices' temperature. Due to the increased heating in photovoltaic (PV) devices, that has significant adverse consequences on both their efficiency and life-time, and inspired by the recent advances in daytime radiative cooling, we developed a co…
We show how to overcome almost every major limitation in passive dew collection including: parasitic heating, parasitic evaporation, uncontrolled wind conditions, and performing dew collection 24 hours per day at nearly arbitrary relative humidity. We incorporate an ideal selective emitter in a simple thermal-equilibrium dew collection model that relies on an important physical insight -- that the roles of the radiative emitter and dew collector should be decoupled to achieve optimal dew harvesting. Previous models of passive dew collection strongly coupled those roles leading to nonideal theo…
Materials with both low absorption of incoming solar radiation and high emittance in mid-infrared band can be applied for daytime radiative cooling. Current state-of-the-art materials for passive radiative cooling often utilize a combination of solar reflector and infrared emitter by different structures, or even by expensive nanofabricated photonic structures, which limits the applications in practice. In this study, possessing these two specified radiative properties, pure Y2Ce2O7 is demonstrated with a performance of passive radiative cooling. With a bandgap at 375.7 nm, the prepared Y2Ce2O…
The technique of passive daytime radiative cooling (PDRC) is used to cool an object down by simultaneously reflecting sunlight and thermally radiating heat to the cold outer space through the Earth's atmospheric window. However, for practical applications, current PDRC materials are facing unprecedented challenges such as complicated and expensive fabrication approaches and performance degradation arising from surface contamination. Here, we develop a scalable paper-based material with excellent self-cleaning and self-cooling capabilities, through air-spraying ethanolic polytetrafluoroethylene…
Broadband electrochromism from visible to infrared wavelengths is attractive for applications like smart windows, thermal-camouflage, and temperature control. In this work, the broadband electrochromic properties of Li4Ti5O12 (LTO) and its suitability for infrared-camouflage and thermoregulation are investigated. Upon Li+ intercalation, LTO changes from a wide band-gap semiconductor to a metal, causing LTO nanoparticles on metal to transition from a super-broadband optical reflector to a solar absorber and thermal emitter. Large tunabilities of 0.74, 0.68 and 0.30 are observed for the solar re…
Small scale renewable energy harvesting is an attractive solution to the growing need for power in remote technological applications. For this purpose, localized thermal gradients on-chip--created via radiative cooling--could be exploited to create microscale renewable heat engines running on environmental heat. This could allow self-powering in small scale portable applications, thus reducing the need for non-renewable sources of electricity and hazardous batteries. In this work, we demonstrate the creation of a local thermal gradient on-chip by radiative cooling of a 90 nm thick freestanding…
