We present a model of soliton propagation in waveguides with quadratic nonlinearity. Criteria for solitons to exist in such waveguides are developed and two example nano-waveguide structures are simulated as proof of concept. Interactions between quadratic solitons and dispersive waves are analysed giving predictions closely matching soliton propagation simulations. The example structures are found to support five different regimes of soliton and quasi-soliton existence. Pulse propagation in these example waveguides has been simulated confirming the possibility of soliton generation at experimentally accessible powers. Simulations of multi-soliton generation, Cherenkov radiation and quasi-solitons with opposite signs of dispersion in the fundamental and second harmonic are also presented here.
We outline the design for a photonic crystal resonator made in a hybrid Silicon/Lithium Niobate material system. Using the index contrast between silicon and lithium niobate, it is possible to guide and confine photonic resonances in a thin film of silicon bonded on top of lithium niobate. Quality factors greater than $10^6$ at optical wavelength scale mode volumes are achievable. We show that patterning electrodes on such a system can yield an electro-optic coupling rate of 0.6 GHz/V (4 pm/V).
Lithium niobate is a multi-functional material, which has been regarded as one of the most promising platform for the multi-purpose optical components and photonic circuits. Targeting at the miniature optical components and systems, lithium niobate microstructures with feature sizes of several to hundreds of micrometers have been demonstrated, such as waveguides, photonic crystals, micro-cavities, and modulators, et al. In this paper, we presented subwavelength nanograting metasurfaces fabricated in a crystalline lithium niobate film, which hold the possibilities towards further shrinking the …
We demonstrate second harmonic generation of blue light on an integrated thin-film lithium niobate waveguide and observe a conversion efficiency of $η_0= 33000\%/\text{W-cm}^2$, significantly exceeding previous demonstrations.
We demonstrate efficient first-order quasi-phase-matched second-harmonic generation in a surface periodically poled Ti:indiffused lithium niobate waveguide; 6 mW of continuous-wave blue radiation (wavelength = 412.6 nm) was produced showing the potential of surface domain inversion for efficient nonlinear waveguide interactions.
Lithium Niobate (LN or just niobate) thin-film micro-photonic resonators have promising prospects in many applications including high efficiency electro-optic modulators, optomechanics and nonlinear optics. This paper presents free-standing thin-film lithium niobate photonic resonators on a silicon platform using MEMS fabrication technology. We fabricated a 35um radius niobate disk resonator that exhibits high intrinsic optical quality factor (Q) of 484,000. Exploiting the optomechanical interaction from the released free-standing structure and high optical Q, we were able to demonstrate acous…
We demonstrate electro-optic tuning of an on-chip lithium niobate microresonator with integrated in-plane microelectrodes. First two metallic microelectrodes on the substrate were formed via femtosecond laser process. Then a high-Q lithium niobate microresonator located between the microelectrodes was fabricated by femtosecond laser direct writing accompanied by focused ion beam milling. Due to the efficient structure designing, high electro-optical tuning coefficient of 3.41 pm/V was observed.
We develop a chip-scale cavity optomechanical system in single-crystal lithium niobate that exhibits high optical quality factors and a large frequency-quality product as high as $3.6\times 10^{12}$ Hz at room temperature and atmosphere. The excellent optical and mechanical properties together with the strong optomechanical coupling allow us to efficiently excite the coherent regenerative optomechanical oscillation operating at 375.8 MHz with a threshold power of 174 ${\rm μW}$ in the air. The demonstrated lithium niobate optomechanical device enables great potential for achieving electro-opti…
Integrated thin-film lithium niobate platform has recently emerged as a promising candidate for next-generation, high-efficiency wavelength conversion systems that allow dense packaging and mass-production. Here we demonstrate efficient, phase-matched second harmonic generation in lithographically-defined thin-film lithium niobate waveguides with sub-micron dimensions. Both modal phase matching in fixed-width waveguides and quasi-phase matching in periodically grooved waveguides are theoretically proposed and experimentally demonstrated. Our low-loss (~ 3.0 dB/cm) nanowaveguides possess normal…
In this paper, we proposed and numerically demonstrated a giant enhancement up to 108 in both forward and backward propagation of the Second Harmonic Generation by combining the high-quality factor cavities of the Bound States in the Continuum and the excellent nonlinear optical crystal of lithium niobate. The enhancement factor is defined as the ratio of the second harmonic signal generated by the structure (lithium niobate membrane with Si grating) divided by the signal generated by lithium niobate membrane alone. Furthermore, a minimum interaction time of 350 ps is achieved despite the etch…
We report on backward second-harmonic-generation in bulk periodically poled congruent lithium niobate with a 3.2 microns period. A tunable continuous-wave Ti:sapphire laser allowed us exciting two resonant quasi-phase-matching orders in the backward configuration. The resonances were also resolved by temperature tuning and interpolated with standard theory to extract relevant information on the sample.
We demonstrate efficient multicycle terahertz pulse generation at 14.6 THz from large-area lithium niobate crystals by using high-energy (up to 2 J) femtosecond Ti:sapphire laser pulses. Such terahertz radiation is produced by phase-matched optical rectification in lithium niobate. Experimentally, we achieve maximal terahertz energy of 0.71 mJ with conversion efficiency of $\sim$0.04%. We also find that the effective interaction length for optimal terahertz conversion is fundamentally limited by terahertz absorption, laser pulse stretching by material dispersion, and terahertz-induced nonlinea…
We report an application of the tri-dimensional pseudo-spectral time domain algorithm, that solves with accuracy the nonlinear Maxwell's equations, to predict second harmonic generation in lithium niobate ridge-type waveguides with high index contrast. Characteristics of the nonlinear process such as conversion efficiency as well as impact of the multimode character of the waveguide are investigated as a function of the waveguide geometry in uniformly and periodically poled medium.
Lithium Niobate (LN) is an important nonlinear optical material. Here we demonstrate LN microdisk resonators that feature optical quality factor ~ 100,000, realized using robust and scalable fabrication techniques, that operate over a wide wavelength range spanning visible and near infrared. Using our resonators, and leveraging LN's large second order optical nonlinearity, we demonstrate on-chip second harmonic generation with a conversion efficiency of 0.109 W-1.
Second harmonic generation is investigated in lithium niobate channels realized by proton exchange and quasi-phase-matched by surface periodic-poling. The reduction in conversion efficiency at high powers is interpreted in terms of multi-photon absorption via two-color terms, yielding an estimate of the dominating three-photon process.
Thin-film lithium niobate is an attractive integrated photonics platform due to its low optical loss and favorable optical nonlinear and electro-optic properties. However, in applications such as second harmonic generation, frequency comb generation, and microwave-to-optics conversion, the device performance is strongly impeded by the photorefractive effect inherent in thin-films. In this paper, we show that the dielectric cladding on lithium niobate microring resonator has a significant influence on the photorefractive effect. By removing the dielectric cladding layer, the photorefractive eff…
Lithium niobate on insulator (LNOI) waveguides, as an emerging technology, have proven to offer a promising platform for integrated optics, due to their strong optical confinement comparable to silicon on insulator (SOI) waveguides, while possessing the versatile properties of lithium niobate, such as high electro-optic coefficients. In this paper, we show that mode hybridization, a phenomenon widely found in vertically asymmetric waveguides, can be efficiently modulated in an LNOI ridge waveguide by electro-optic effect, leading to a polarization mode converter with 97% efficiency. Moreover, …
We report on two novel ways for patterning Lithium Niobate (LN) at submicronic scale by means of focused ion beam (FIB) bombardment. The first method consists of direct FIB milling on LiNbO3 and the second one is a combination of FIB milling on a deposited metallic layer and subsequent RIE (Reactive Ion Etching) etching. FIB images show in both cases homogeneous structures with well reproduced periodicity. These methods open the way to the fabrication of photonic crystals on LiNbO3 substrates.
Optical microresonators have recently attracted a growing attention in the photonics community. Their applications range from quantum electro-dynamics to sensors and filtering devices for optical telecommunication systems, where they are likely to become an essential building block. The integration of nonlinear and electro-optical properties in the resonators represents a very stimulating challenge, as it would incorporate new and more advanced functionality. Lithium niobate is an excellent candidate material, being an established choice for electro-optic and nonlinear optical applications. He…
High quality lithium niobate thin film microresonators provide an ideal platform for on-chip nonlinear optics applications. However, the phase matching condition for efficient parametric process sets a high requirement for fabrication control. Here we demonstrate a photonic molecular structure composed of two strongly coupled lithium niobate microdisks of different diameters fabricated using femtosecond laser micromachining and focused ion beam milling. With a continuous wave excitation, rich nonlinear optical processes including cascaded four-wave mixing and stimulated Raman scattering were o…
We report on fabrication of depressed cladding optical waveguides buried in lithium niobate crystal with shaped femtosecond laser pulses. Depressed cladding waveguides of variable mode-field sizes are fabricated by forming the four sides of the cladding using a slit-beam shaping technique. We show that the waveguides fabricated by our technique allows single-mode propagation of the light polarized in both vertical and horizontal directions.
We review measurements in the literature regarding Kerr nonlinearity of lithium niobate. Of particular interest is to separate the value of the electronic Kerr nonlinearity and the strength of the delayed Raman nonlinearity. The spectral shape of the Raman response in LN is discussed and we restrict ourselves to the case where the pump is polarized along the optical axis. This configuration is important for so-called type 0 noncritical interaction, which is used in QPM devices and in recent supercontinuum generation and few-cycle soliton compression experiments.
In this paper, by cascading several bichromatic photonic crystals we demonstrate that the quality factor can be much larger compared with that in an isolated cavity without increasing the total size of the device. We take lithium niobate photonic crystal as an example to illustrate that the simulated quality factor of the cascaded cavity can attain 10^5 with a 70° slant angle, which is an order of magnitude larger than that in isolated cavity. The device can be fabricated easily by current etching technique for lithium niobate. We have fabricated the proposed device experimentally including ho…
Much progress, both experimentally and theoretically, has recently been made towards optical frequency comb generation from continuously pumped second-order nonlinear systems. Here, we present the first observations towards finding an integrated solution for such a system, using a titanium indiffused lithium niobate waveguide resonator. These results are compared to recently developed theory for equivalent systems. The system is seen to exhibit strong instabilities, which require further investigation in order to fully determine the suitability of this platform for stable optical frequency com…
We report intracavity Bragg scattering induced by photorefractive (PR) effect in high-Q lithium niobate (LN) ring resonators at cryogenic temperatures. We show that, when a cavity mode is strongly excited, the PR effect imprints a long-lived periodic space-charge field. This residual field in turn creates a refractive index modulation pattern that dramatically enhances the back scattering of an incoming probe light, and results in selective and reconfigurable mode splittings. This PR-induced Bragg scattering effect, despite being undesired for many applications, could be utilized to enable opt…
We study the chirality of periodically poled MgO-doped lithium niobate (MgO:PPLN) by electro-optic (EO) effect. It shows that optical propagation is reciprocal in MgO:PPLN when quasi-phase-matching (QPM) condition is satisfied, which is similar to natural optical active material like quartz. The specific rotation of MgO:PPLN by EO effect is shown to be proportional to the transverse electric field, making large polarization rotation in optical active material with small size possible. We also demonstrate that the chirality of MgO:PPLN can be controlled by external electric field.
We demonstrate coherent supercontinuum generation (SCG) in a monolithically integrated lithium-niobate waveguide, under the presence of second- and third-order nonlinear effects. We achieve more than two octaves of optical bandwidth in a 0.5-cm-long waveguide with 100-picojoule-level pulses. Dispersion engineering of the waveguide allows for spectral overlap between the SCG and the second harmonic which enables direct detection of the carrier-envelope offset frequency fCEO using a single waveguide. We measure the fCEO of our femtosecond pump source with a 30-dB signal-to-noise ratio.
We describe a technique for surface domain engineering in congruent lithium niobate single crystals. The method is based on conventional electric-field poling, but involves an intentional overpoling step that inverts all the material apart from a thin surface region directly below the patterned photoresist. The surface poled structures show good domain uniformity, and the technique has so far been applied to produce domain periods as small as 1 μm. The technique is fully compatible with nonlinear optical integrated devices based on waveguide structures.
We obtained an optical-to-terahertz (THz) energy conversion efficiency of 0.5% using the tilted-pulse-front technique in lithium niobate at a cryogenically cooled temperature of 100 K pumped by amplified Ti:sapphire laser pulses with ~150 fs pulse duration at 800 nm wavelength. Compared with the optimized conversion efficiency of 0.18% achieved at room temperature, we achieved more than 2.5 times enhancement in conversion efficiency upon cryogenically cooling the crystal due to reduction of THz absorption. Further improvements to the conversion efficiency can be made by optimizing the out-coup…
We report experimental demonstration of continuous-wave cascaded-harmonic generation and Raman lasing in a millimeter-scale lithium niobate whispering-gallery resonator pumped at a telecommunication-compatible infrared wavelength. Intensity enhancement through multiple recirculations in the whispering-gallery resonator and quasi phase-matching through a nonuniform crystal poling enable simultaneous cascaded-harmonic generation up to the fourth-harmonic accompanied by stimulated Raman, two-photon, three-photon, and four-photon Raman scattering corresponding the molecular vibrational wavenumbers…
We demonstrate integrating a high quality factor lithium niobate microdisk resonator with a free-standing membrane waveguide. Our technique is based on femtosecond laser direct writing which produces the pre-structure, followed by focused ion beam milling which reduces the surface roughness of sidewall of the fabricated structure to nanometer scale. Efficient light coupling between the integrated waveguide and microdisk was achieved, and the quality factor of the microresonator was measured as high as 1.67*10^5.
We carried out second-harmonic generation in quasi-phase-matched α-phase lithium niobate channel waveguides realized by proton exchange and surface periodic poling. Owing to a limited ferroelectric domain depth, we could observe the interplay between second-harmonic generation and self-phase modulation due to cascading and cubic effects, resulting in a nonlinear resonance shift. Data reduction allowed us to evaluate both the quadratic nonlinearity in the near infrared as well as the depth of the uninverted domains.
An anisotropic model for the fabrication of annealed and reverse proton exchange waveguides in lithium niobate is presented. We characterized the anisotropic diffusion properties of proton exchange, annealing and reverse proton exchange in Z-cut and X-cut substrates using planar waveguides. Using this model we fabricated high quality channel waveguides with propagation losses as low as 0.086 dB/cm and a coupling efficiency with optical fiber of 90% at 1550 nm. The splitting ratio of a set of directional couplers is predicted with an accuracy of +- 0.06.
Tunable light sources are a key enabling technology for many applications such as ranging, spectroscopy, optical coherence tomography, digital imaging and interferometry. For miniaturized laser devices, whispering gallery resonator lasers are a well-suited platform, offering low thresholds and small linewidths, however, many realizations suffer from the lack of reliable tuning. Rare-earth ion-doped lithium niobate offers a way to solve this issue. Here we present a single-frequency laser based on a neodymium-doped lithium niobate whispering gallery mode resonator that is tuned via the linear e…
We report on fabrication of high Q lithium niobate (LN) whispering-gallery-mode (WGM) microresonators suspended on silica pedestals by femtosecond laser microfabrication. The micrometer-scale (diameter ~82 μm) LN resonator possesses a Q factor of 2.5x10^5 around 1550 nm wavelength range. Moreover, second harmonic generation with a continuous-wave tunable single-longitudinal-mode pump laser in the on-chip LN microresonator is demonstrated in the on-chip LN microresonator. A fiber taper is employed to couple the pump laser into the microresonator, showing a normalized conversion efficiency of 1.…
We report the optical and dielectric properties in hafnium (Hf)-doped lithium niobate (LN) crystals. We investigated samples of congruent composition with various doping concentration varying from 0 to 8 mol%. The clamped and unclamped values of the electro-optic coefficient r 22 of Hf-doped LN and the corresponding dielectric permittivity as well, have been experimentally determined and compared with the results obtained in undoped congruent LN crystals. We show that the electro-optic and dielectric properties are only slightly affected by the introduction of hafnium ions, and therefore Hf-do…
Second-order optical nonlinear effects (second-harmonic and sum-frequency generation) are demonstrated in the telecommunication band by periodic poling of thin films of lithium niobate wafer-bonded on silicon substrates and rib-loaded with silicon nitride channels to attain ridge waveguide with cross-sections of ~ 2 μm2. The compactness of the waveguides results in efficient second-order nonlinear devices. A nonlinear conversion of 8% is obtained with a pulsed input in 4 mm long waveguides. The choice of silicon substrate makes the platform potentially compatible with silicon photonics, and th…
In this paper, we have investigated the interplay between the second and third-order nonlinearities in lithium-niobate waveguides with strong waveguide dispersion using uniform and linearly-chirped poling patterns at input powers in the pico-joule range. We have implemented the accurate unidirectional pulse propagation model to take into account all the possible nonlinear interactions inside these structures. In particular, the poling period has been designed to quasi-phase-match single and multiple sum- and difference-frequency generation processes. We have shown how the poling period can be …
We have operated a CW triply resonant OPO using a PPLN crystal pumped by a Nd:YAG laser at 1.06 micron and generating signal and idler modes in the 2-2.3 micron range. The OPO was operated stably in single mode operation over large periods of time with a pump threshold as low as 500 microwatts.
Systematic Analysis of Ferroelectric Domain Dynamics in Periodically Poled Lithium Niobate Waveguides Using Two-Photon Microscopy and Digital Imaging Processing
Thin-film lithium niobate (TFLN) is an emerging platform for compact, low-power nonlinear-optical devices, and has been used extensively for near-infrared frequency conversion. Recent work has extended these devices to mid-infrared wavelengths, where broadly tunable sources may be used for chemical sensing. To this end, we demonstrate efficient and broadband difference frequency generation between a fixed 1-micron pump and a tunable telecom source in uniformly-poled TFLN-on-sapphire by harnessing the dispersion-engineering available in tightly-confining waveguides. We show a simultaneous 1-2 o…
Temporal cloaks have inspired the innovation of research on security and efficiency of quantum and fiber communications for concealing temporal events. The existing temporal cloaking approaches possessing ps ~ns cloaking windows employed the third-order nonlinearity mostly. Here we explore a temporal cloak for perpetually concealing pulse events using high efficiency second-order nonlinearity. A temporal pulse event was cloaked as a continuous wave with constant intensity and restored by polarization dependent sum frequency generation processes between the continuous wave and probe. The variet…
We report an on-chip single mode microlaser with low-threshold fabricated on Erbium doped lithium niobate on insulator (LNOI). The single mode laser emission at 1550.5 nm wavelength is generated in a coupled photonic molecule, which is facilitated by Vernier effect when pumping the photonic molecule at 970 nm. A threshold pump power as low as 200 uW is demonstrated thanks to the high quality factor above 10^6. Moreover, the linewidth of the microlaser reaches 4 kHz, which is the best result in LNOI microlasers. Such single mode micro-laser lithographically fabricated on chip is highly in deman…
The capability to modulate the intensity of an optical beam has scientific and practical significance. In this work, we demonstrate Y-Z cut lithium niobate acousto-optic modulators with record-high modulation efficiency, requiring only $1.5~\text{W}/\text{cm}^2$ for 100% modulation at 7 MHz. These modulators use a simple fabrication process; coating the top and bottom surfaces of a thin lithium niobate wafer with transparent electrodes. The fundamental shear acoustic mode of the wafer is excited through the transparent electrodes by applying voltage with frequency corresponding to the resonant…
Many applications of metasurfaces require an ability to dynamically change their properties in time domain. Electrical tuning techniques are of particular interest, since they pave a way to on-chip integration of metasurfaces with optoelectronic devices. In this work, we propose and experimentally demonstrate an electro-optic lithium niobate (EO-LN) metasurface that shows dynamic modulations to phase retardation of transmitted light. Quasi-bound states in the continuum (QBIC) are observed from our metasurface. And by applying external electric voltages, the refractive index of the LN is change…
Using an affordable ytterbium laser with sub-mJ of energy combined with a novel pulse compression technique, we demonstrate an extremely competitive state-of-the-art terahertz (THz) source with 53 mW of average power and 310 kV/cm at focus from the tilted-pulse front pumping scheme in lithium niobate at room temperature. Key points of this demonstration include the use of a pump pulse duration of 280 fs in combination with an echelon mirror. Our results present unmatched combined characteristics and are highly competitive with the existing THz sources pumped at the mJ range. This demonstration…
Thin-film lithium niobate on insulator (LNOI) has emerged as a superior integrated-photonics platform for linear, nonlinear, and electro-optics. Here we combine quasi-phase-matching, dispersion engineering, and tight mode confinement to realize nonlinear parametric processes with both high efficiency and wide wavelength tunability. On a millimeter-long, Z-cut LNOI waveguide, we demonstrate ultra-efficient ($1900\pm500 \% $W$^{-1}$cm$^{-2}$) and highly tunable (-1.71 nm/K) second-harmonic generation from 1530 to 1583 nm by type-0 quasi-phase-matching. Our technique is applicable to optical harm…
