Wireless energy transferring technology offers a constant and instantaneous power for low-power applications such as Internet of Things (IoT) to become an affordable reality. This paper considers simultaneous wireless information and power transfer (SWIPT) over a dual-hop decode-and-forward (DF) relay network with the power-splitting (PS) energy harvesting protocol at the relay. The relay is equipped with a finite capacity battery. The system performance, which is characterized by the average success probability of source to destination transmission, is a function of the resource allocation policy that selects the PS ratio and the transmit energy of the relay. We develop a mathematical framework to find an upper bound for the maximum the average success probability. The upper bound is formulated by a discrete state space Markov decision problem (MDP) and make use of a policy iteration algorithm to calculate it.
In this paper, we study a massive multiple-input multiple-output (mMIMO) relay network where multiple source-destination pairs exchange information through a common relay equipped with a massive antenna array. The source users perform simultaneous wireless information and power transfer (SWIPT) and the power-splitting (PS) scheme is used at the relay to first harvest energy from the received signals, and then, to transmit the decoded signals using the harvested energy. Relay performs maximum ratio combining/maximum ratio transmission (MRC/MRT) beam-forming on the received signal. Under the thr…
This paper considers simultaneous wireless information and power transfer (SWIPT) over a dual-hop dynamic decode-and-forward (DF) relay network with the power-splitting (PS) energy harvesting protocol at the relay. The circuit power consumption (CPC), which includes power requirements for both decoding and encoding circuits, is considered at the relay. For a rate-dependent linear CPC model, we formulate an optimization problem to decide the optimal throughput, PS ratio, relay transmit power and time ratio for the source to relay transmission. Although the resultant optimization problem is non-…
Adaptive link selection for buffer-aided relaying can achieve significant performance gain compared with the conventional relaying with fixed transmission criterion. However, most of the existing link-selection strategies are designed based on perfect channel state information (CSI), which are very complex by requiring channel estimator. To solve this issue, in this paper, we investigate a buffer-aided differential chaos-shift-keying based simultaneous wireless information and power transfer (DCSK-SWIPT) relay system, where a decode-and-forward protocol is considered and the relay is equipped …
This paper proposes a novel cooperative secure unmanned aerial vehicle (UAV) aided transmission protocol, where a source (Alice) sends confidential information to a destination (Bob) via an energy-constrained UAV-mounted amplify-and-forward (AF) relay in the presence of a ground eavesdropper (Eve). We adopt destination-assisted cooperative jamming (CJ) as well as simultaneous wireless information and power transfer (SWIPT) at the UAV-mounted relay to enhance physical-layer security (PLS) and transmission reliability. Assuming a low altitude UAV, we derive connection probability (CP), secrecy o…
This letter proposes a dynamic power splitting scheme (DPSS) for decode-and-forward (DF) based cooperative simultaneous wireless information and power transfer (SWIPT) networks with direct link. The relay node adopts an optimal dynamic power splitting factor determined by instantaneous channel state information (CSI) to harvest energy and process information. The expressions for the optimal dynamic power splitting factor, outage probability and ergodic capacity of the proposed network are derived. Numerical results show that the proposed scheme is better than or the same as the existing PS sch…
In this paper, we analyze the symbol error rate (SER) performance of the simultaneous wireless information and power transfer (SWIPT) enabled three-node differential decode-and-forward (DDF) relay networks, which adopt the power splitting (PS) protocol at the relay. The use of non-coherent differential modulation eliminates the need for sending training symbols to estimate the instantaneous channel state information (CSI) at all network nodes, and therefore improves the power efficiency, as compared with the coherent modulation. However, performance analysis results are not yet available for t…
Time splitting and power splitting incorporating, a hybrid Simultaneous Wireless Information and Power Transfer (SWIPT) based cooperative Non-Orthogonal Multiple Access (CNOMA) protocol is considered in this paper. Cell center user of the CNOMA system acts as a relay to enhance the reliability of the cell edge user (CEU). SWIPT is considered to empower the relay operation to avoid the battery draining issue. To enhance the system performance in terms of ergodic sum capacity (ESC) and outage probabilities (OP), an integration of CNOMA strategy and hybrid SWIPT protocol for the downlink (DL) tra…
For enhancing transmission performance, privacy level and energy manipulating efficiency of wireless networks, this paper initiates a novel simultaneous wireless information and power transfer (SWIPT) full-duplex (FD) relaying protocol, termed harvest-and-opportunistically-relay (HOR). In the proposed HOR protocol, the relay can work opportunistically in either pure energy harvesting (PEH) or the FD SWIPT mode. Due to the FD characteristics, the dynamic fluctuation of R's residual energy is difficult to quantify and track. To solve this problem, we apply a novel discrete-state Markov Chain (MC…
Radio-frequency (RF) energy harvesting (EH) in wireless relaying networks has attracted considerable recent interest, especially for supplying energy to relay nodes in Internet-of-Things (IoT) systems to assist the information exchange between a source and a destination. Moreover, limited hardware, computational resources, and energy availability of IoT devices have raised various security challenges. To this end, physical layer security (PLS) has been proposed as an effective alternative to cryptographic methods for providing information security. In this study, we propose a PLS approach for …
Non-orthogonal multiple access (NOMA) is considered to be one of the best candidates for future networks due to its ability to serve multiple users using the same resource block. Although early studies have focused on transmission reliability and energy efficiency, recent works are considering cooperation among the nodes. The cooperative NOMA techniques allow the user with a better channel (near user) to act as a relay between the source and the user experiencing poor channel (far user). This paper considers the link security aspect of energy harvesting cooperative NOMA users. In particular, t…
This paper considers a cooperative cognitive radio network with two primary users (PUs) and two secondary users (SUs) that enables two-way communications of primary and secondary systems in conjunction with non-linear energy harvesting based simultaneous wireless information and power transfer (SWIPT). With the considered network, SUs are able to realize their communications over the licensed spectrum while extending relay assistance to the PUs. The overall bidirectional end-to-end transmission takes place in four phases, which include both energy harvesting (EH) and information transfer. A no…
In this paper, the integration of cooperative non-orthogonal multiple access (CNOMA) and power splitting based simultaneous wireless information and power transfer (SWIPT) is proposed to improve the spectral and energy efficiency. Moreover, different orbital angular momentum (OAM) based signals are also considered in this paper to transmit additional symbols to cell center user (CCU) and cell edge user (CEU). In the proposed technique, CCU is used as energy-constrained relay to forward signal to CEU. CCU harvests energy from the transmitted signal by the BS using the power splitting technique.…
Aiming at the limited battery capacity of widely deployed low-power smart devices in the Internet-of-things (IoT), this paper proposes a novel intelligent reflecting surface (IRS) empowered unmanned aerial vehicle (UAV) simultaneous wireless information and power transfer (SWIPT) network framework, in which IRS is used to reconstruct the wireless channel to enhance the wireless energy transmission efficiency and coverage area of the UAV SWIPT networks. In this paper, we formulate an achievable sum-rate maximization problem by jointly optimizing UAV trajectory, successive interference cancellat…
This work compares different linear and nonlinear RF energy harvesting models, including limited or unlimited sensitivity, for simultaneous wireless information and power transfer (SWIPT). The probability of successful SWIPT reception under a family of RF harvesting models is rigorously quantified, using state-of-the-art rectifiers in the context of commercial RFIDs. A significant portion of SWIPT literature uses oversimplified models that do not account for limited sensitivity or nonlinearity of the underlying harvesting circuitry. This work demonstrates that communications signals are not al…
This letter analyzes the performance of simultaneous wireless information-and-power transfer (SWIPT) in an overlay cognitive radio network (CRN) under Nakagami-$m$ fading. A pair of secondary users (SUs) is considered in which one SU facilitates relay cooperation for communications between two primary users (PUs). In return, SUs make use of primary users' signals for energy harvesting (EH) and realize their own communications. In such a network, end-to-end bidirectional communications between the two PUs and unidirectional information exchange between the SUs can be performed in three phases. …
In this letter, a reconfigurable intelligent surface (RIS)-assisted simultaneous wireless information and power transfer (SWIPT) network is investigated. To quantify the freshness of the data packets at the information receiver, the age of information (AoI) is considered. To minimize the sum AoI of the information users while ensuring that the power transferred to energy harvesting users is greater than the demanded value, we formulate a scheduling scheme, and a joint transmit beamforming and phase shift optimization at the base station (BS) and RIS, respectively. The alternating optimization …
This study considers the Joint Transmit/Reflect Beamforming and Power Splitting (JTRBPS) optimization problem in a spectrum underlay setting, such that the transmit sum-energy of the intelligent reflecting surface (IRS)-aided secondary transmitter (ST) is minimized subject to the quality-of-service requirements of the PS-simultaneous wireless information and power transfer (SWIPT) secondary receivers and the interference constraints of the primary receivers (PR). The interference at the PRs caused by the reception of IRS-reflected signals sent by the primary transmitter is taken into account. …
In this paper, we propose a state-of-the-art downlink communication transceiver design for transmissive reconfigurable metasurface (RMS)-enabled simultaneous wireless information and power transfer (SWIPT) networks. Specifically, a feed antenna is deployed in the transmissive RMS-based transceiver, which can be used to implement beamforming. According to the relationship between wavelength and propagation distance, the spatial propagation models of plane and spherical waves are built. Then, in the case of imperfect channel state information (CSI), we formulate a robust system sum-rate maximiza…
This paper proposes a novel network framework of intelligent reflecting surface (IRS)-assisted simultaneous wireless information and power transfer (SWIPT) non-orthogonal multiple access (NOMA) networks, where IRS is used to enhance the NOMA performance and the wireless power transfer (WPT) efficiency of SWIPT. We formulate a problem of minimizing base station (BS) transmit power by jointly optimizing successive interference cancellation (SIC) decoding order, BS transmit beamforming vector, power splitting (PS) ratio and IRS phase shift while taking into account the quality-of-service (QoS) re…
Traditional simultaneous wireless information and power transfer (SWIPT) with power splitting assumes perfect channel state information (CSI), which is difficult to obtain especially in the massive multiple-input-multiple-output (MIMO) regime. In this letter, we consider a mixed-timescale joint beamforming and power splitting (MJBP) scheme to maximize general utility functions under a power constraint in the downlink of a massive MIMO SWIPT IoT network. In this scheme, the transmit digital beamformer is adapted to the imperfect CSI, while the receive power splitters are adapted to the long-ter…
The performance of Simultaneous Wireless Information and Power Transfer (SWIPT) is mainly constrained by the received Radio-Frequency (RF) signal strength. To tackle this problem, we introduce an Intelligent Reflecting Surface (IRS) to compensate the propagation loss and boost the transmission efficiency. This paper proposes a novel IRS-aided SWIPT system where a multi-carrier multi-antenna Access Point (AP) transmits information and power simultaneously, with the assist of an IRS, to a single-antenna User Equipment (UE) employing practical receiving schemes. Considering harvester nonlinearity…
In this paper, relay selection is considered to enhance security of a cooperative system with multiple threshold-selection decode-and-forward (DF) relays. Threshold-selection DF relays are the relays in which a predefined signal-to-noise ratio is set for the condition of successful decoding of the source message. We focus on the practical and general scenario where the channels suffer from independent non-identical Rayleigh fading and where the direct links between the source and destination and source and eavesdropper are available. Based on channel state information knowledge, three relay se…
Power splitting (PS) based simultaneous wireless information and power transfer (SWIPT) is considered in a multi-user multiple-input-single-output broadcast scenario. Specifically, we focus on jointly configuring the transmit beamforming vectors and receive PS ratios to minimize the total transmit energy of the base station under the user-specific latency and energy harvesting (EH) requirements. The battery depletion phenomenon is avoided by preemptively incorporating information regarding the receivers' battery state and EH fluctuations into the resource allocation design. The resulting time-…
In this paper, we consider a dual-hop Multiple Input Multiple Output (MIMO) wireless multi-relay network, in which a source-destination pair both equipped with multiple antennas communicates through multiple half-duplex amplify-and-forward (AF) relay terminals which are also with multiple antennas. Since perfect channel state information (CSI) is difficult to obtain in practical multi-relay network, we consider imperfect CSI for all channels. We focus on maximizing the signal-to-interference-plus-noise ratio (SINR) at the destination. We propose a novel robust linear beamforming at the relays,…
Cognitive radio (CR) and non-orthogonal multiple access (NOMA) are two promising technologies in the next generation wireless communication systems. The security of a NOMA CR network (CRN) is important but lacks of study. In this paper, a multiple-input single-output NOMA CRN relying on simultaneous wireless information and power transfer is studied. In order to improve the security of both the primary and secondary network, an artificial noise-aided cooperative jamming scheme is proposed. Different from the most existing works, a power minimization problem is formulated under a practical non-…
The ever increasing demands for mobile network access have resulted in a significant increase in bandwidth usage. By improving the system spectral efficiency, multi-way relay networks (MWRNs) provide promising approaches to address this challenge. In this paper, we propose a novel linear beamforming design, namely partial zero-forcing (PZF), for MWRNs with a multiple-input-multiple-output (MIMO) relay. Compared to zero-forcing (ZF), PZF relaxes the constraints on the relay beamforming matrix such that only partial user-interference, instead of all, is canceled at the relay. The users eliminate…
Successive relaying can improve the transmission rate by allowing the source and relays to transmit messages simultaneously, but it may cause severe inter-relay interference (IRI). IRI cancellation schemes have been proposed to mitigate IRI. However, interference cancellation methods have a high risk of error propagation, resulting in a severe transmission rate loss in finite blocklength regimes. Thus, jointly decoding for successive relaying with finite-blocklength coding (FBC) remains a challenge. In this paper, we present an optimized channel-aware ordered successive relaying protocol with …
In this paper, we investigate an outdoor and indoor wireless communication network with the assistance of a novel relay-aided double-sided reconfigurable intelligent surface (RIS). A scheduling problem is considered at the outdoor access point (AP) to minimize the sum of age of information (AoI). To serve the indoor users and further enhance the wireless link quality, a novel double-sided RIS with relay is utilized. Since the formulated problem is non-convex with highly-coupled variables, a successive convex approximation (SCA) based alternating optimization (AO) algorithm is proposed to solve…
This paper considers an intelligent reflecting surface (IRS) assisted multi-input multi-output (MIMO) power splitting (PS) based simultaneous wireless information and power transfer (SWIPT) system with multiple PS receivers (PSRs). The objective is to maximize the achievable data rate of the system by jointly optimizing the PS ratios at the PSRs, the active transmit beamforming (ATB) at the access point (AP), and the passive reflective beamforming (PRB) at the IRS, while the constraints on maximum transmission power at the AP, the reflective phase shift of each element at the IRS, the individu…
In this work, a non-orthogonal multiple access (NOMA) based transmission between two sources and two end-users is examined over independent non-identically distributed (i.n.i.d.) slow Nakagami-$m$ fading channels, where a single relay using decode-and-forward (DF) protocol is selected out of a set of full-duplex/half-duplex (FD/HD) multiple relays in accordance with the quality of service criterion. Two relay selection (RS) strategies, selecting a relay to maximize data rate of user 1 at selected relay and selecting a relay out of a set of relays providing service quality for user 1 to maximiz…
Rate-splitting multiple access (RSMA) and reconfigurable intelligent surface (RIS) have been both recognized as promising techniques for 6G. The benefits of combining the two techniques to enhance the spectral and energy efficiency have been recently exploited in communication-only networks. Inspired by the recent advances on RIS empowered RSMA, in this work we investigate the use of RIS empowered RSMA for simultaneous wireless information and power transfer (SWIPT) with one transmitter concurrently sending information to multiple information receivers (IRs) and transferring energy to multiple…
In this paper, we study an active IRS-aided simultaneous wireless information and power transfer (SWIPT) system. Specifically, an active IRS is deployed to assist a multi-antenna access point (AP) to convey information and energy simultaneously to multiple single-antenna information users (IUs) and energy users (EUs). Two joint transmit and reflect beamforming optimization problems are investigated with different practical objectives. The first problem maximizes the weighted sum-power harvested by the EUs subject to individual signal-to-interference-plus-noise ratio (SINR) constraints at the I…
Reconfigurable intelligent surfaces (RISs) achieve high passive beamforming gains for signal enhancement or interference nulling by dynamically adjusting their reflection coefficients. Their employment is particularly appealing for improving both the wireless security and the efficiency of radio frequency (RF)-based wireless power transfer. Motivated by this, we conceive and investigate a RIS-assisted secure simultaneous wireless information and power transfer (SWIPT) system designed for information and power transfer from a base station (BS) to an information user (IU) and to multiple energy …
In this paper, we investigate centralized scheduling strategies for cooperative incremental redundancy retransmissions in the slow-fading half-duplex multiple access multiple relay channel. Time Division Multiple Access is assumed for the sources and the relays. Sources transmit successively in time slots for the first phase. The second phase consists of a limited number of time slots for retransmissions. In each time slot, the destination schedules a node (being a relay or a source) to retransmit, conditional on the knowledge of the correctly decoded source sets of each node (which is itself …
In this paper, we investigate the energy-efficient hybrid precoding design for integrated multicast-unicast millimeter wave (mmWave) system, where the simultaneous wireless information and power transform is considered at receivers. We adopt two sparse radio frequency chain antenna structures at the base station (BS), i.e., fully-connected and subarray structures, and design the codebook-based analog precoding according to the different structures. Then, we formulate a joint digital multicast, unicast precoding and power splitting ratio optimization problem to maximize the energy efficiency of…
This paper proposes and investigates an overlay spectrum sharing system in conjunction with the simultaneous wireless information and power transfer (SWIPT) to enable communications for the Internet of Things (IoT) applications. Considered is a cooperative cognitive radio network, where two IoT devices (IoDs) exchange their information and also provide relay assistance to a pair of primary users (PUs). Different from most existing works, in this paper, both IoDs can harvest energy from the radio-frequency (RF) signals received from the PUs. By utilizing the harvested energy, they provide relay…
Backscattering assisted wireless-powered communication combines ultralow-power backscatter transmitters with energy harvesting devices. This paper investigates the transmission mode selection problem of a hybrid relay that forwards data by switching between the active wireless-powered transmission and the passive ambient backscattering. It first presents a hybrid relay system model and derives its end-to-end success probability under theoretically optimal, but practically unrealistic, conditions. The transmission mode selection is then formulated as a stochastic two-armed bandit problem in a v…
In this paper, we address the power allocation problem for a decode and forward (DF) relay system, where a massive multiple-input-multiple-output (mMIMO) multi-carrier (MC) base station (BS) node communicates with a MC single antenna node directly and also through the single antenna full duplex (FD) MC relay, using rate splitting (RS) approach. Successive interference cancellation approach is adopted at the destination. We consider orthogonal frequency division multiplexing (OFDM) as our MC strategy. We take into account the impact of hardware distortions resulting in residual self-interferenc…
Cooperative relaying is utilized as an efficient method for data communication in wireless sensor networks and the Internet of Things (IoT). However, sometimes due to the necessity of multi-hop relaying in such communication networks, it is challenging to guarantee the secrecy of cooperative transmissions when the relays may themselves be eavesdroppers, i.e., we may face with the untrusted relaying scenario where the relays are both necessary helpers and potential adversary. To obviate this issue, a new cooperative jamming scheme is proposed in this paper, in which the data can be confidential…
In this paper, a cooperative protocol is investigated for a multi-hop network consisting of relays with buffers of finite size, which may operate in different communication modes. The protocol is based on the myopic decode-and-forward strategy, where each node of the network cooperates with a limited number of neighboring nodes for the transmission of the signals. Each relay stores in its buffer the messages that were successfully decoded, in order to forward them through the appropriate channel links, based on its supported communication modes. A complete theoretical framework is investigated…
