Internet-of-things (IoT) is gaining popularity in recent times. Cellular network can be an appropriate solution for the IoT connectivity. With the exponential increase in the number of connected IoT devices, energy consumption is a bottleneck for wireless connectivity solutions. In this work, we proposed a scheme to decrease the power consumption of a base station of a cell. The maximum power consumption of a base station is associated with its data processing, routing, and transmission. Our scheme reduce the size of the transmission data which ultimately reduce the power consumption associated with it. Multiple data reduction techniques have been used for this purpose. System level simulations show the efficiency of our proposed system.
Due to the higher wireless transmission rates in the fifth generation (5G) cellular networks, higher computation overhead is incurred in smartphones, which can cause the wireless transmission rates to be limited by the computation capability of wireless terminals. In this case, is there a maximum receiving rate for smartphones to maintain stable wireless communications in 5G cellular networks? The main objective of this article is to investigate the maximum receiving rate of smartphones and its influence on 5G cellular networks. Based on Landauer's principle and the safe temperature bound on t…
The energy efficiency aspect of cellular networks is a vital topic of research over the recent days. As energy consumption is on the rise and the price of electricity is increasing very rapidly, necessity to reduce electricity usage in every aspect is becoming much more significant. The power grid infrastructure, from which the cellular networks attain the required electricity for operation is considering a significant change from the traditional electricity grid to the smart grid. The base stations, which are the main candidates for energy consumption in cellular networks, remain in operation…
The number of connected Internet of Things (IoT) devices within cyber-physical infrastructure systems grows at an increasing rate. This poses significant device management and security challenges to current IoT networks. Among several approaches to cope with these challenges, data-based methods rooted in deep learning (DL) are receiving an increased interest. In this paper, motivated by the upcoming surge of 5G IoT connectivity in industrial environments, we propose to integrate a DL-based anomaly detection (AD) as a service into the 3GPP mobile cellular IoT architecture. The proposed architec…
Leveraging multi-carrier access offers a promising approach to boosting access quality in mobile networks. However, our experiments show that the potential benefits are hard to fulfill due to fundamental limitations in the network-controlled design. To overcome these limitations, we propose iCellular, which allows users to define and intelligently select their own cellular network access from multiple carriers. iCellular reuses the existing device-side mechanisms and the standard cellular network procedure, but leverages the end device's intelligence to be proactive and adaptive in multi-carri…
The electricity production and distribution is facing two major changes. First, the production is shifting from classical energy sources such as coal and nuclear power towards renewable resources such as solar and wind. Secondly, the consumption in the low voltage grid is expected to grow significantly due to expected introduction of electrical vehicles. The first step towards more efficient operational capabilities is to introduce an observability of the distribution system and allow for leveraging the flexibility of end connection points with manageable consumption, generation and storage ca…
5G networks mainly rely on infrastructure-centric cellular solutions to address data traffic and service demands. Continuously scaling infrastructure-centric cellular networks is not exempt of challenges, and beyond 5G networks should consider the active coexistence and coordination of infrastructure-centric and device-centric wireless networks. Device-centric wireless networks will build from D2D and MCNs. Device-centric wireless networks can push the limits of edge computing and networking to smart devices (including smartphones, vehicles, machines and robots), and exploit their mobile compu…
Device-to-device (D2D) communication enables the user equipments (UEs) located in close proximity to bypass the cellular base stations (BSs) and directly connect to each other, and thereby, offload traffic from the cellular infrastructure. D2D communication can improve spatial frequency reuse and energy efficiency in cellular networks. This paper presents a comprehensive and tractable analytical framework for D2D-enabled uplink cellular networks with a flexible mode selection scheme along with truncated channel inversion power control. Different from the existing mode selection schemes where t…
The introduction of smart electricity meters with cellular radio interface puts an additional load on the wireless cellular networks. Currently, these meters are designed for low duty cycle billing and occasional system check, which generates a low-rate sporadic traffic. As the number of distributed energy resources increases, the household power will become more variable and thus unpredictable from the viewpoint of the Distribution System Operator (DSO). It is therefore expected, in the near future, to have an increased number of Wide Area Measurement System (WAMS) devices with Phasor Measure…
Smart city projects aim to enhance the management of city infrastructure by enabling government entities to monitor, control and maintain infrastructure efficiently through the deployment of Internet-of-things (IoT) devices. However, the financial burden associated with smart city projects is a detriment to prospective smart cities. A noteworthy factor that impacts the cost and sustainability of smart city projects is providing cellular Internet connectivity to IoT devices. In response to this problem, this paper explores the use of public transportation network nodes and mules, such as bus-st…
We present PCach, a smartphone-based approach for relieving the congestion in cellular network resulting from the exponential growth in mobile data traffic. The basic idea underlying PCach is simple: use WiFi to proactively cache content on the smartphone's memory, which otherwise would have been delivered through the cellular network. However, it leads to several challenging questions, including how much mobile data actually flows through cellular networks, how much data can be pre-cached, and when and what to pre-cache. We address these questions progressively using a thorough analysis of us…
We introduce a measurement tool for the performance evaluation of wireless communications with drones over cellular networks. The Android software records various LTE parameters, evaluates the TCP and UDP throughput, and tracks the GPS position. Example measurement results are presented.
The adoption of smart / adaptive antenna techniques in future wireless systems is expected to have a significant impact on the efficient use of the spectrum, the minimization of the cost of establishing new wireless networks, the optimization of service quality and realization of transparent operation across multi technology wireless networks [1]. This paper presents brief account on smart antenna (SA) system. SAs can place nulls in the direction of interferers via adaptive updating of weights linked to each antenna element. SAs thus cancel out most of the co-channel interference resulting in …
Smart grid, regarded as the next generation power grid, uses two-way flows of electricity and information to create a widely distributed automated energy delivery network. In this work we present our vision on smart grid from the perspective of wireless communications and networking technologies. We present wireless communication and networking paradigms for four typical scenarios in the future smart grid and also point out the research challenges of the wireless communication and networking technologies used in smart grid
The smart city is an emerging notion that is leveraging the Internet of Things (IoT) technique to achieve more comfortable, smart and controllable cities. The communications crossing domains between smart cities is indispensable to enhance collaborations. However, crossing-domain communications are more vulnerable since there are in different domains. Moreover, there are huge different devices with different computation capabilities, from sensors to the cloud servers. In this paper, we propose a lightweight two-layer blockchain mechanism for reliable crossing-domain communication in smart citi…
In this paper, using the stochastic geometry theory, we present a framework for analyzing the performance of device-to-device (D2D) communications underlaid uplink (UL) cellular networks. In our analysis, we consider a D2D mode selection criterion based on an energy threshold for each user equipment (UE). Specifically, a UE will operate in a cellular mode, if its received signal strength from the strongest base station (BS) is large than a threshold β. Otherwise, it will operate in a D2D mode. Furthermore, we consider a generalized log-normal shadowing in our analysis. The coverage probability…
This dissertation studies different aspects of D2D communications and its impact on the key performance indicators of the network. We design an architecture for the collaboration of cellular users by means of timely exploited D2D opportunities. We begin by presenting the analytical study on opportunistic outband D2D communications. The study reveals the great potential of opportunistic outband D2D communications for enhancing energy efficiency, fairness, and capacity of cellular networks when groups of D2D users can be form and managed in the cellular network. Then we introduce a protocol that…
The development of mobile communication technology, hardware, distributed computing, and artificial intelligence (AI) technology has promoted the application of edge computing in the field of heterogeneous Internet of Things (IoT). In order to overcome the defects of the traditional cloud computing model in the era of big data. In this article, we first propose a new AIenabled smart edge with heterogeneous IoT architecture which combines edge computing, caching, and communication. Then, we propose the Smart-Edge-CoCaCo algorithm. To minimize total delay and confirm the computation offloading d…
Device-to-device (D2D) communications in cellular networks are promising technologies for improving network throughput, spectrum efficiency, and transmission delay. In this paper, we first introduce the concept of guard distance to explore a proper system model for enabling multiple concurrent D2D pairs in the same cell. Considering the Signal to Interference Ratio (SIR) requirements for both macro-cell and D2D communications, a geometrical method is proposed to obtain the guard distances from a D2D user equipment (DUE) to the base station (BS), to the transmitting cellular user equipment (CUE…
This paper presents a review for the development of Intelligent Transportation System (ITS) world wide and the use of Smart Antennas in ITS. This review work also discusses the usual problems in ITS and proposes the solution of such problems using smart antennas.
Device-to-Device (D2D) communications is a technology that allows mobile users to relay information to each other, without access to the cellular network. In this paper, we consider how to dynamically select multi-hop routes for D2D communications in spectrum co-existence with a fully loaded cellular network. The modelling scenario is that of a real urban environment, when the cellular network is congested during an unexpected event, such as a terrorist attack. We use D2D to relay data across the urban terrain, in the presence of conventional cellular (CC) communications. We consider different…
In this report, we consider how to dynamically select transmission bands and multi-hop routes for device-to-device (D2D) communications in co-existence with a cellular network overlay. Firstly, we consider different wireless routing algorithms, i.e. broadcasting-routing (BR) method, and shortest-path-routing (SPR) method. The results show that depending on the co-existence cellular users' outage constraint, different routing strategies have different merits. BR is acceptable at the low D2D user density but is terrible at high density. We also consider the channel band performance (Uplink band …
Cellular networks with D2D links are increasingly being explored for mission-critical applications (e.g., real-time control and AR/VR) which require predictable communication reliability. Thus it is critical to control interference among concurrent transmissions in a predictable manner to ensure the required communication reliability. To this end, we propose a Unified Cellular Scheduling (UCS) framework that, based on the Physical-Ratio-K (PRK) interference model, schedules uplink, downlink, and D2D transmissions in a unified manner to ensure predictable communication reliability while maximiz…
Device-to-device (D2D) communications as an underlay of a LTE-A (4G) network can reduce the traffic load as well as power consumption in cellular networks by way of utilizing peer-to-peer links for users in proximity of each other. This would enable other cellular users to increment their traffic, and the aggregate traffic for all users can be significantly increased without requiring additional spectrum. However, D2D communications may increase interference to cellular users (CUs) and force CUs to increase their transmit power levels in order to maintain their required quality-of-service (QoS…
In this paper, we proposed a novel OTSS-assisted optical network architecture for smart-grid communication networks, which has unique requirements for low-latency connections. Illustrative results show that, OTSS can provide extremely better performance in latency and blocking probability than conventional flexi-grid optical networks.
Offloading traffic through opportunistic communications has been recently proposed as a way to relieve the current overload of cellular networks. Opportunistic communication can occur when mobile device users are (temporarily) in each other's proximity, such that the devices can establish a local peer-to-peer connection (e.g., via Bluetooth). Since opportunistic communication is based on the spontaneous mobility of the participants, it is inherently unreliable. This poses a serious challenge to the design of any cellular offloading solutions, that must meet the applications' requirements. In t…
The evolution of cellular technologies toward 5G progressively enables efficient and ubiquitous communications in an increasing number of fields. Among these, vehicular networks are being considered as one of the most promising and challenging applications, requiring support for communications in high-speed mobility and delay-constrained information exchange in proximity. In this context, simulation frameworks under the OMNeT++ umbrella are already available: SimuLTE and Veins for cellular and vehicular systems, respectively. In this paper, we describe the modifications that make SimuLTE inter…
Heterogeneous cellular networks (HCNs) with millimeter wave (mmWave) communications included are emerging as a promising candidate for the fifth generation mobile network. With highly directional antenna arrays, mmWave links are able to provide several-Gbps transmission rate. However, mmWave links are easily blocked without line of sight. On the other hand, D2D communications have been proposed to support many content based applications, and need to share resources with users in HCNs to improve spectral reuse and enhance system capacity. Consequently, an efficient resource allocation scheme fo…
Global System for Mobile Communications (GSM) is a cellular network that is popular and has been growing in recent years. It was developed to solve fragmentation issues of the first cellular system, and it addresses digital modulation methods, level of the network structure, and services. It is fundamental for organizations to become learning organizations to keep up with the technology changes for network services to be at a competitive level. A simulation analysis using the NetSim tool in this paper is presented for comparing different cellular network codecs for GSM network performance. The…
Machine-to-machine (M2M) communications have attracted great attention from both academia and industry. In this paper, with recent advances in wireless network virtualization and software-defined networking (SDN), we propose a novel framework for M2M communications in software-defined cellular networks with wireless network virtualization. In the proposed framework, according to different functions and quality of service (QoS) requirements of machine-type communication devices (MTCDs), a hypervisor enables the virtualization of the physical M2M network, which is abstracted and sliced into mult…
To overcome the limitations of DSRC with short range, non-supportability of high density networks, unreliable broadcast services, signal congestion and connectivity disruptions, cellular vehicle-to-everything (C-V2X) communication networks, standardized in 3rd Generation Partnership Project (3GPP) Release 14, have been recently introduced to cover broader vehicular communication scenarios including vehicle-to-vehicle (V2V), vehicle-to-pedestrian (V2P) and vehicle-to-infrastructure/network (V2I/N). In C-V2X, vehicles can directly communicate over PC5 based dedicated sidelinks called direct mode…
A recent paper by Yang et al. [1] proposed CRB-RPL as a new RPL-based routing protocol for communications in cognitive radio (CR) enabled smart grid. Essentially, CRB-RPL adopts the operation of CRB-MAC, which is a medium access control (MAC) protocol for cognitive machine-to-machine (M2M) communications, and depicts it as a network layer enhancement. CRB-RPL suffers from a number of technical flaws in terms of protocol operation and analytical aspects. The main objective of this paper is to highlight these technical flaws of CRB-RPL and provide corrections to analytical modeling.
Smart manufacturing is a vision and major driver for change in industrial environments. The goal of smart manufacturing is to optimize manufacturing processes through constantly monitoring and adapting processes towards more efficient and personalised manufacturing. This requires and relies on technologies for connected machines incorporating a variety of computation, sensing, actuation, and machine to machine communications modalities. As such, understanding the change towards smart manufacturing requires knowledge of the enabling technologies, their applications in real world scenarios and t…
Machine-to-machine (M2M) communications have attracted great attention from both academia and industry. In this paper, with recent advances in wireless network virtualization and software-defined networking (SDN), we propose a novel framework for M2M communications in software-defined cellular networks with wireless network virtualization. In the proposed framework, according to different functions and quality of service (QoS) requirements of machine-type communication devices (MTCDs), a hypervisor enables the virtualization of the physical M2M network, which is abstracted and sliced into mult…
By using experimental measurements of smart grid applications compliant with IEC 61850 in trace-driven WiMAX simulations, we show that the WiMAX MAC protocol efficiency decreases as a function of the number of stations. To avoid this shortcoming, we propose and analyze a novel WiMAX MAC protocol for smart grid applications, which uses lattice correlators to improve the throughput-delay performance significantly. For the considered configurations, the obtained maximum throughput of the proposed MAC protocol outperforms the current WiMAX MAC protocol by up to 41%.
The rapid growth of consumer Unmanned Aerial Vehicles (UAVs) is creating promising new business opportunities for cellular operators. On the one hand, UAVs can be connected to cellular networks as new types of user equipment, therefore generating significant revenues for the operators that can guarantee their stringent service requirements. On the other hand, UAVs offer the unprecedented opportunity to realize UAV-mounted flying base stations that can dynamically reposition themselves to boost coverage, spectral efficiency, and user quality of experience. Indeed, the standardization bodies are…
Prior Internet designs encompassed the fixed, mobile and lately the things Internet. In a natural evolution to these, the notion of the Tactile Internet is emerging which allows one to transmit touch and actuation in real-time. With voice and data communications driving the designs of the current Internets, the Tactile Internet will enable haptic communications, which in turn will be a paradigm shift in how skills and labor are digitally delivered globally. Design efforts for both the Tactile Internet and the underlying haptic communications are in its infancy. The aim of this article is thus …
Cellular network resources are essential to be optimized in Femto cells equipped macro cell networks. This is achieved by increasing the cellular coverage and channel capacity, and reducing power usage and interference between femto cells and macro cells. In this paper, the optimization approach for cellular resources with installed femto cells in macro cell networks has been addressed by deploying smart antennas applications and effect power adaptation method which significantly optimize the cellular coverage, channel capacity, power usage, and intra and inter tier interference. The simulatio…
This paper analyses the potential of utilising small unmanned-aerial-vehicles (SUAV) as wireless relays for assisting cellular network performance. Whilst high altitude wireless relays have been investigated over the past 2 decades, the new class of low cost SUAVs offers new possibilities for addressing local traffic imbalances and providing emergency coverage.We present field-test results from an SUAV test-bed in both urban and rural environments. The results show that trough-to-peak throughput improvements can be achieved for users in poor coverage zones. Furthermore, the paper reinforces th…
In this paper, we propose a transceiver architecture for full-duplex (FD) eNodeB (eNB) and FD user equipment (UE) transceiver. For FD communication,.i.e., simultaneous in-band uplink and downlink operation, same subcarriers can be allocated to UE in both uplink and downlink. Hence, contrary to traditional LTE, we propose using single-carrier frequency division multiple accesses (SC-FDMA) for downlink along with the conventional method of using it for uplink. The use of multiple antennas at eNB and singular value decomposition (SVD) in the downlink allows multiple users (MU) to operate on the s…
Smartphone-based communication networks form a basis for services in emergency response scenarios, where communication infrastructure is impaired or overloaded. Still, their design and evaluation are largely based on simulations that rely on generic mobility models and weak assumptions regarding user behavior. For a realistic assessment, scenario-specific models are essential. To this end, we conducted a large-scale field test of a set of emergency services that relied solely on ad hoc communication. Over the course of one day, we gathered data from smartphones distributed to 125 participants …
Emergency communications requires reliability and flexibility for disaster recovery and relief operation. Based upon existing commercial portable devices (e.g., smartphones, tablets, laptops), we propose a network architecture that uses cellular networks and WiFi connections to deliver large files in emergency scenarios under the impairments of wireless channel such as packet losses and intermittent connection issues. Network coding (NC) is exploited to improve the delivery probability. We first review the state-of-the-art of NC for emergency communications. Then, we present the proposed netwo…
Future IoT is expected to get ubiquitous connection and access in a global scale. In the meantime, with the empowered communications capability for IoT devices, IoT will evolve to be highly autonomous, even under the help from infrastructure, and thus will gradually establish the smart IoT community. One of the major challenges imposed on the smart IoT communities is the socialization of IoT communications, because massive IoT accesses make centralized control very hard and also face the shortage of spectrum resources. Towards these issues, we in this article first present the overview and dis…
As an important part of the Internet-of-Things (IoT), machine-to-machine (M2M) communications have attracted great attention. In this paper, we introduce mobile edge computing (MEC) into virtualized cellular networks with M2M communications, to decrease the energy consumption and optimize the computing resource allocation as well as improve computing capability. Moreover, based on different functions and quality of service (QoS) requirements, the physical network can be virtualized into several virtual networks, and then each MTCD selects the corresponding virtual network to access. Meanwhile,…
Since the last few years there has been a phenomenal growth in the wireless industry. Widespread wireless technologies, increasing variety of user-friendly and multimedia- enabled terminals and wider availability of open source tools for content generation has lead encouraged user-centric networks resulting in a need for efficient network design. The objective of this paper is comprehensive study related to 5G technology of mobile communication. Existing research work in mobile communication is related to 5G technology. The major contribution of this study is the key provisions of 5G (Fifth Ge…
The paper discusses M2M communications standards for smart metering. One of the our goals is to show the failures of ETSI standartization process for M2M communications. Our paper proposes some extesions to ETSI standards. At the first hand, it is M-Bus protocol and Open Metering System based on M-Bus. The paper shows how to estimate wireless M-bus throughput and how to avoid collisions. After analysis of Open API for M2M, submitted to ETSI, we propose a new approach in the client-side web development - Web Intents. The main goal for our suggestions is to simplify the development phase for new…
A smart grid based Advanced Metering Infrastructure (AMI), is a technology that enables the utilities to monitor and control the electricity consumption through a set of various smart meters (SMs) connected via a two way communication infrastructure. One of the key challenges for smart grids is how to connect a large number of devices. On the other hand, 4G Long Term Evolution (LTE), the latest standard for mobile communications, was developed to provide stable service performance and higher data rates for a large number of mobile users. Therefore, LTE is considered a promising solution for wi…
In this paper, we investigate how to network smartphones for providing communications in disaster recovery. By bridging the gaps among different kinds of wireless networks, we have designed and implemented a system called TeamPhone, which provides smartphones the capabilities of communications in disaster recovery. Specifically, TeamPhone consists of two components: a messaging system and a self-rescue system. The messaging system integrates cellular networking, ad-hoc networking and opportunistic networking seamlessly, and enables communications among rescue workers. The self-rescue system gr…
This paper presents a preliminary system architecture of integrating OMNeT++ into the mosaik co-simulation framework. This will enable realistic simulation of communication network protocols and services for smart grid scenarios and on the other side, further development of communication protocols for smart grid applications. Thus, by integrating OMNeT++ and mosaik, both communities will be able to leverage each others's sophisticated simulation models and expertise. The main challenges identified are the external management of the OMNeT++ simulation kernel and performance issues when federati…
TU Darmstadt（达姆施塔特工业大学）；Philipps-Universität Marburg（马尔堡菲利普斯大学）
We present a novel data-driven approach to perform smooth Wi-Fi/cellular handovers on smartphones. Our approach relies on data provided by multiple smartphone sensors (e.g., Wi-Fi RSSI, acceleration, compass, step counter, air pressure) to predict Wi-Fi connection loss and uses Multipath TCP to dynamically switch between different connectivity modes. We train a random forest classifier and an artificial neural network on real-world sensor data collected by five smartphone users over a period of three months. The trained models are executed on smartphones to reliably predict Wi-Fi connection lo…
This paper discusses on the need to focus on effective and cheap communication solutions for the deployment of smart services in countrysides. We present the main wireless technologies, software architectures and protocols that need to be exploited, such as multihop, multipath communication and mobility support through multihoming. We present Always Best Packet Switching (ABPS), an operation mode to perform network handover in a seamless way without the need to change the current network infrastructure and configuration. This is in accordance with the need of having cheap solutions that may wo…
Optimization of energy consumption in future intelligent energy networks (or Smart Grids) will be based on grid-integrated near-real-time communications between various grid elements in generation, transmission, distribution and loads. This paper discusses some of the challenges and opportunities of communications research in the areas of smart grid and smart metering. In particular, we focus on some of the key communications challenges for realizing interoperable and future-proof smart grid/metering networks, smart grid security and privacy, and how some of the existing networking technologie…
Connectivity has a major role in the current transformation of smart manufacturing. 5G is foreseen as an integral part of an end-to-end networking infrastructure supporting smart manufacturing operation. The integration of 5G with time-sensitive networking (TSN)is seen as a holistic communication solution for smart factories. The next generation of industrialization consists of real-time processes, automation, fixed and cellular networks, and high diversity of devices. The integration of fixed and cellular devices in a single infrastructure to enable end-to-end deterministic communications req…
While cognitive radio enables spectrum-efficient wireless communication, radio frequency (RF) energy harvesting from ambient interference is an enabler for energy-efficient wireless communication. In this paper, we model and analyze cognitive and energy harvesting-based D2D communication in cellular networks. The cognitive D2D transmitters harvest energy from ambient interference and use one of the channels allocated to cellular users (in uplink or downlink), which is referred to as the D2D channel, to communicate with the corresponding receivers. We investigate two spectrum access policies fo…
Machine-to-machine (M2M) communications are expected to provide ubiquitous connectivity between machines without the need of human intervention. To support such a large number of autonomous devices, the M2M system architecture needs to be extremely power and spectrally efficient. This article thus briefly reviews the features of M2M services in the third generation (3G) long-term evolution and its advancement (LTE-Advanced) networks. Architectural enhancements are then presented for supporting M2M services in LTE-Advanced cellular networks. To increase spectral efficiency, the same spectrum is…
