This paper aims at studying the angular scattering properties of bianisotropic metasurfaces and at clarifying the different roles played by tangential and normal polarization densities. Different types of metasurfaces are considered for this study and are classified according to their symmetrical/asymmetrical and reciprocal/nonreciprocal angular scattering behavior. Finally, the paper presents the relationships between the symmetrical angular scattering properties of reciprocal metasurfaces and the structural symmetries of their scattering particles. This may prove to be practically useful for the implementation of metasurfaces with complex angular scattering characteristics.
We present an initial study of the angular spectrum of a bianisotropic refractive metasurface at an interface between two dielectric media. In this study, we report on the existence of three distinct angular regions: a)~a rotated transmission cone, b)~a modified total internal reflection region, and c)~a new total retro-reflection region.
A bianisotropic metasurface design is proposed for extending the Brewster effect to arbitrary angles and polarizations. The metasurface is synthesized using the surface susceptibility tensor and Generalized Sheet Transition Conditions (GSTCs) synthesis method, and is demonstrated by GSTC-FDFD simulation. It is found that an extremely broad angular range (0-30) with near zero reflection may be obtained near the normal angle, which is of paramount interest in paraxial optics, while narrower angular range at more oblique angles may find applications in spatial filtering.
We propose a surface-wave dispersion retrieval method and synthesis technique that applies to bianisotropic metasurfaces that are embedded in symmetric or asymmetric environments. Specifically, we use general zero-thickness sheet transition conditions to relate the propagation constants of surface-wave modes to the bianisotropic susceptibility components of the metasurface, which can themselves be directly related to its scattering parameters. It is then possible to either obtain the metasurface dispersion diagram from its known susceptibilities or, alternatively, compute the susceptibilities …
We provide a detailed discussion on the electromagnetic modeling and classification of polarization converting bianisotropic metasurfaces. To do so, we first present a general approach to compute the scattering response of such metasurfaces, which relies on a generalized sheet transition conditions based susceptibility model. Then, we review how the fundamental properties of reciprocity, energy conservation, rotation invariance and matching may be expressed in terms of metasurface susceptibilities and scattering parameters, and show how these properties may affect and limit the polarization ef…
Bianisotropy is a powerful concept enabling asymmetric optical response, including asymmetric reflection, absorption, optical forces, light trapping, and lasing. The physical origin of these asymmetric effects can be understood from magnetoelectric coupling and asymmetrical field enhancement. Here, we theoretically propose highly asymmetric second-harmonic generation (SHG) in bianisotropic AlGaAs metasurfaces. We show that around four orders of magnitude second-harmonic power difference for the forward and backward illuminations can be obtained by altering geometrical parameters that coincide …
Electromagnetic metasurface design based on far-field constraints without the complete knowledge of the fields on both sides of the metasurface is typically a time consuming and iterative process, which relies heavily on heuristics and ad hoc methods. This paper proposes an end-to-end systematic and efficient approach where the designer inputs high-level far-field constraints such as nulls, sidelobe levels, and main beam level(s); and a 3-layer non-uniform passive, lossless, omega-type bianisotropic electromagnetic metasurface design to satisfy them is returned. The surface parameters to reali…
We discuss different applications and potentials of reciprocal bianisotropic metasurfaces including uniform and gradient metasurfaces, in particular, with anisotropic, chiral, and omega properties. Based on an analytic analysis, we discuss the necessary conditions to observe asymmetric co- and cross- polarization reflection and/or transmission, polarization conversion and rotation, asymmetric absorption, etc. We consider two kinds of incident wave scenarios based on linear and circular polarization.
Metasurfaces are an enabling technology for complex wave manipulation functions, including in the terahertz frequency range, where they are expected to advance security, imaging, sensing, and communications technology. For operation in transmission, Huygens' metasurfaces are commonly used, since their good impedance match to the surrounding media minimizes reflections and maximizes transmission. Recent theoretical work has shown that Huygens' metasurfaces are non-optimal, particularly for large angles of refraction, and that to eliminate reflections and spurious diffracted beams it is necessar…
We present a simple and efficient Finite-Difference Time-Domain (FDFD) scheme for simulating dispersive (Lorentz-Debye) bianisotropic metasurfaces. This scheme replaces the conventional FDTD update equations by augmented update equations where the effect of the metasurface, positioned at a virtual node (or node plane) in the Yee grid, is accounted for by judiciously selected auxiliary polarization functions, based on the Generalized Sheet Transition Conditions (GSTCs). This scheme is computationally -- time- and memory-wise -- more efficient and easier to implement than a previously reported s…
A general strategy for the realization of electric and magnetic quasi-trapped modes located at the same spectral position is presented. This strategy's application makes it possible to design metasurfaces allowing switching between the electric and magnetic quasi-trapped modes by changing the polarization of the incident light wave. The developed strategy is based on two stages: the application of the dipole approximation for determining the conditions required for the implementation of trapped modes and the creation of the energy channels for their excitation by introducing a weak bianisotrop…
We show that a properly designed bianisotropic metasurface placed at the interface between two arbitrary different media, or coating a dielectric medium exposed to the air, provides Brewster (reflectionless) transmission at arbitrary angles and for both the TM and TE polarizations. We present a rigorous derivation of the corresponding surface susceptibility tensors based on the Generalized Sheet Transition Conditions (GSTCs), and demonstrate the system with planar microwave metasurfaces designed for polarization-independent and azimuth-independent operations. Moreover, we reveal that such a sy…
Upon using fundamental electromagnetic properties of metasurfaces we build a platform to classify reciprocal bianisotropic metasurfaces from typical experimental measurements and determine isotropic, anisotropic, bi-isotropic (chiral), and bianisotropic (so-called omega) properties. We provide experimental guidelines to identify each class by measuring macroscopic scattering parameters, i.e., reflection and transmission coefficients upon plane wave illumination with linear and/or circular polarization. We explicitly provide a recipe of what metasurface properties can and cannot be inferred by …
The paper overviews our recent work on the synthesis of metasurfaces and related concepts and applications. The synthesis is based on generalized sheet transition conditions (GSTCs) with a bianisotropic surface susceptibility tensor model of the metasurface structure. We first place metasurfaces in a proper historical context and describe the GSTC technique with some fundamental susceptibility tensor considerations. Upon this basis, we next provide an in-depth development of our susceptibility-GSTC synthesis technique. Finally, we present five recent metasurface concepts and applications, whic…
One of the main advantages of reciprocal bianisotropic metasurfaces is their capability to produce asymmetric scattering depending from which side they are illuminated and on the handedness of circularly polarized illuminations. For most applications, these metasurfaces are designed for illumination by a single source at a time. The resulting bianisotropic metasurface has a specific and usually complex geometrical structure that ensures the expected scattering produced under various illuminations. Here we show that geometrical asymmetry of metasurfaces can be emulated by using non-bianisotropi…
In recent years, new functionality and unprecedented wavefront control has been enabled by the introduction of bianisotropic metasurfaces. A bianisotropic metasurface is characterized by an electric response, a magnetic response, and an electromagnetic/magnetoelectric response. In general, these metasur-faces consists of an array of metallic or dielectric particles located within a subwavelength thick host medium, and are approximated and modelled as infinitely-thin, idealized sheet boundaries defined along a surface. An appropriate sheet boundary condition which effectively models the tangent…
Surface waves supported by structured metallic surfaces, i.e. metasurfaces, have drawn wide attention recently. They are promising for various applications ranging from integrated photonic circuits to imaging and bio-sensing in various frequency regimes. In this work, we show that surface states with diverse polarization configurations can be supported by a metasurface consisting of a single layer of bianisotropic metamaterial elements. The structure possesses D2d symmetry, which includes mirror symmetry in the xz and yz plane, and C2 rotational symmetry along y = +-x axis. Due to this unique …
Strong Mode Coupling via Quasi-Bound States in the Continuum in Bianisotropic Metasurfaces
Nanophotonics Technology Center, Universitat Politècnica de València（纳米光子技术中心，瓦伦西亚理工大学）；Department of Electronics and Nanoengineering, Aalto University（电子与纳米工程系，阿尔托大学）
This paper presents a framework for analyzing and designing cylindrical omega-bianisotropic metasurfaces, inspired by mode matching and digital signal processing techniques. Using the discrete Fourier transform, we decompose the the electromagnetic field distributions into orthogonal cylindrical modes and convert the azimuthally varying metasurface constituent parameters into their respective spectra. Then, by invoking appropriate boundary conditions, we set up systems of algebraic equations which can be rearranged to either predict the scattered fields of prespecified metasurfaces, or to synt…
We propose the concept of one-sided quantum interference based on non-Hermitian metasurfaces.By designing bianisotropic metasurfaces with a non-Hermitian exceptional point, we show that quantum interference can exist only on only one side but not another. This is the quantum inheritance of unidirectional zero reflection in classical optics.The one-side interference can be further manipulated with tailor-made metasurface. With two photons simultaneously entering the metasurface from different sides, the probability for only outputting one photon on the side with reflection can be modified to ze…
Omega bianisotropic metasurfaces (OBMS) provide wave-control capabilities not previously available with Huygens' metasurfaces (HMS). These enhanced capabilities derive from the additional degree of freedom provided by OBMS, and are based on analyses of zero-thickness surfaces with abstract surface impedance properties. However, the design of practical metasurfaces has proven tedious. Herein, we propose a novel, easily designed structure to realize OBMSs. Extending our previous work, we show that an asymmetrical cascade of two judiciously engineered Fabry-Perot (FP) etalons could form an OBMS m…
Electromagnetic metasurfaces have attracted significant interest recently due to their low profile and advantageous applications. Practically, many metasurface designs start with a set of constraints for the radiated far-field, such as main-beam direction(s) and side lobe levels, and end with a non-uniform physical structure for the surface. This problem is quite challenging, since the required tangential field transformations are not completely known when only constraints are placed on the scattered fields. Hence, the required surface properties cannot be solved for analytically. Moreover, th…
The features of polarization control of multiple multiresonances for quasi-trapped modes excited by synchronization of bianisotropic dipole responses in MoS$_2$ disks with a hole are considered. Using the numerical calculations with analytical multipole analysis, we showed that the presence of a strong optical anisotropy of MoS$_2$ nanoparticles provides an additional degree of freedom and allows to observe several resonances of electric and magnetic dipoles at once in a narrow spectral range. Based on the simulation results, we obtained the frequency dependences for the dipole polarizabilitie…
Maximum non reciprocity in metasurfaces of gyrotropic rods
Institute of Electronic Structure and Laser, Foundation of Research and Technology Hellas（电子结构与激光研究所，希腊研究基金会）；School of Electrical and Computer Engineering, National Technical University of Athens（雅典国立技术大学电气与计算机工程学院）；Department of Physics, National and Kapodistrian University of Athens（雅典诺米卡卡波迪斯特里亚斯大学物理系）
We present a (nongyrotropic) metasurface magnetless specular isolator. This device reflects as a mirror a wave incident under a specified angle in one direction and absorbs it in the opposite direction. The metasurface is synthesized in terms of bianisotropic susceptibility tensors, whose nonreciprocity resides in normal components and exhibits a hybrid electric, magneto-electric nature. The metaparticle is implemented in the form of a U-shaped conducting structure loaded by a transistor. The operation principle of the specular isolator is demonstrated by both full-wave simulation and experime…
Hyperbolic propagation offers exciting opportunities in nanophotonics, from sub-diffraction imaging to enhanced local density of states. This transport regime is typically induced by strong modulation of conductivity, i.e., with alternating metallic and dielectric material properties. Here, we analyze a moving impedance surface, showing that suitably tailored homogeneous metasurfaces can support one-way hyperbolic propagation when in motion, adding non-reciprocity to hyperbolic propagation phenomena, and without suffering from nonlocal effects stemming from discretization or finite granularity…
Within the paradigm of metamaterials and metasurfaces, electromagnetic properties of composite materials can be engineered by shaping or modulating their constituents, so-called meta-atoms. Synthesis and analysis of complex-shape meta-atoms with general polarization properties is a challenging task. In this paper, we demonstrate that the most general response can be conceptually decomposed into a set of basic, fundamental polarization phenomena, which enables immediate all-direction characterization of electromagnetic properties of arbitrary linear metamaterials and metasurfaces. The proposed …
Thermo-optical properties of the nanodisc and metal hole array plasmonic perfect absorber (PPA) metasurfaces were designed and characterised at midinfrared wavelengths. Both, light emitter and detector systems are highly thought after for the future sensor networks in the internet-of-things for various spectral domains. Reciprocity of the absorbance and emittance is shown experimentally, i.e., the PPAs are following Kirchhoff's law where the patterns exhibiting a strong optical absorption were found enhanced thermal radiation. Design principles and scaling for photo-thermal conversion are disc…
Emerging photonic functionalities are mostly governed by the fundamental principle of Lorentz reciprocity. Lifting the constraints imposed by this principle could circumvent deleterious effects that limit the performance of photonic systems. A variety of approaches have recently been explored to break reciprocity, yet most efforts have been limited to confined photonic systems. Here, we propose and experimentally demonstrate a spatio-temporally modulated metasurface capable of extreme breakdown of Lorentz reciprocity. Through tailoring the momentum and frequency harmonic contents of the scatte…
Static metasurfaces have shown to be prominent compact structures for reciprocal and frequency-invariant transformation of electromagnetic waves in space. However, incorporating temporal variation to static metasurfaces would result in dynamic apparatuses which are capable of four-dimensional tailoring of both the spatial and temporal characteristics of electromagnetic waves, leading to functionalities that are far beyond the capabilities of conventional static metasurfaces. This includes nonreciprocal full-duplex wave transmission, pure frequency conversion, parametric wave amplification, spa…
In this letter, we propose a magnet-less non-reciprocal isolating system based on time-varying metasurfaces. Two parallel time-varying metasurfaces, one for frequency up-conversion and one for down-conversion by the same amount, are used for realizing a region of space where incident waves from opposite directions experience an opposite Doppler frequency shift. As a result, any device within this region becomes sensitive to the illumination direction, exhibiting a different scattering response from opposite directions and thus breaking reciprocity. Very importantly, thanks to the opposite freq…
This tutorial provides an intuitive and concrete description of the phenomena of electromagnetic nonreciprocity that will be useful for readers with engineering or physics backgrounds. The notion of time reversal and its different definitions are discussed with special emphasis to its relationship with the reciprocity concept. Starting from the Onsager reciprocal relations generally applicable to many physical processes, we present the derivation of the Lorentz theorem and discuss other implications of reciprocity for electromagnetic systems. Next, we identify all possible routes towards engin…
We develop a quasi-normal mode theory (QNMT) to calculate a system's scattering $S$ matrix, simultaneously satisfying both energy conservation and reciprocity even for a small truncated set of resonances. It is a practical reduced-order (few-parameter) model based on the resonant frequencies and constant mode-to-port coupling coefficients, easily computed from an eigensolver without the need for QNM normalization. Furthermore, we show how low-$Q$ modes can be separated into an effective slowly varying background response $C$, giving an additional approximate formula for $S$, which is useful to…
