Recent experiments with film-coupled nanoparticles suggest that the impact of spatial dispersion is enhanced in plasmonic structures where high wavevector guided modes are excited. More advanced descriptions of the optical response of metals than Drude's are thus probably necessary in plasmonics. We show that even in classical prism coupler experiments, the plasmonic enhancement of spatial dispersion can be leveraged to make such experiments two orders of magnitude more sensitive. The realistic multilayered structures involved rely on layers that are thick enough to rule our any other phenomenon as the spill-out. Optical evanescent excitation of plasmonic waveguides using prism couplers thus constitutes an ideal platform to study spatial dispersion.
A set of grating couplers that convert plane waves into odd pairs of plasmons supported by extremely thin layers of doped indium tin oxide is designed. The inverse design approach is implemented to improve the efficiency of ordinary periodical couplers significantly. The optimization code based on the gradient descent method and direct Maxwell solver is designed in Matlab. Three models with different optimization levels are compared and discussed. The results of calculations are prepared for subsequent experimental verification. Considered odd plasmonic pairs represent an example of high quali…
An optical switch based on liquid-crystal tunable long-range metal stripe waveguides is proposed and theoretically investigated. A nematic liquid crystal layer placed between a vertical configuration consisting of two gold stripes is shown to allow for the extensive electro-optic tuning of the coupler's waveguiding characteristics. Rigorous liquid-crystal switching studies are coupled with the investigation of the optical properties of the proposed plasmonic structure, taking into account different excitation conditions and the impact of LC-scattering losses. A directional coupler optical swit…
By a hybrid integration of plasmonic and dielectric waveguide concepts, it is shown that coherent perfect absorption can be achieved in a co-propagant coupler geometry. The device holds promises for classical and quantum signal processing. First, the operating principle of the proposed device is detailed in the context of a more general 2x2 lossy coupler formalism. Then, it is shown how to tune the device in a wide region of possible working points, its broadband operation, and the tolerance to fabrication uncertainties. Finally, a complete picture of the electromagnetic modes inside the hybri…
We experimentally demonstrate plasmonic nano-circuits operating as sub-diffraction directional couplers optically excited with high efficiency from free-space using optical Yagi-Uda style antennas at λ= 1550 nm. The optical Yagi-Uda style antennas are designed to feed channel plasmon waveguides with high efficiency (45 % in coupling, 60 % total emission), narrow angular directivity (< 40°) and low insertion loss. SPP gap waveguides exhibit propagation lengths as large as 34 μm with adiabatically tuned confinement, and are integrated with ultra-compact (5 μm x 10 μm), highly dispersive directio…
We develop an approach to utilize anisotropic metamaterials to solve one of the fundamental problems of modern plasmonics -- parasitic scattering of surface waves into free-space modes, opening the road to truly two-dimensional plasmonic optics. We illustrate the developed formalism on examples of plasmonic refractor and plasmonic crystal, and discuss limitations of the developed technique and its possible applications for sensing and imaging structures, high-performance mode couplers, optical cloaking structures, and dynamically reconfigurable electro-plasmonic circuits.
A plasmonic coupled-cavity system, which consists of a quarter-wave coupler cavity, a resonant Fabry-Perot detector nanocavity, and an off-resonant reflector cavity, is used to enhance the localization of surface plasmons in a plasmonic detector. The coupler cavity is designed based on transmission line theory and wavelength scaling rules in the optical regime, while the reflector cavity is derived from off-resonant resonator structures to attenuate transmission of plasmonic waves. We observed strong coupling of the cavities in simulation results, with an 86% improvement of surface plasmon loc…
From the onset of high-speed optical communications, lithium niobite (LN) has been the material of choice for electro-optic modulators owing to its large electro-optic response, wide transparent window, excellent thermal stability and long-term material reliability. Conventional LN electro-optic modulators while continue to be the workhorse of the optoelectronic industry become progressively too bulky, expensive and power hungry to fully serve the needs of this industry rapidly progressing towards highly integrated, cost-effective and energy efficient components and circuits. Recently develope…
Optical modulators are required to have high modulation bandwidths and a compact footprint. In this paper we experimentally demonstrate a novel Si/In$_2$O$_3$ hybrid plasmonic waveguide modulator, which is realized by an asymmetric directional coupler (ADC) consisting of a silicon photonic waveguide and a Si/In$_2$O$_3$ hybrid plasmonic waveguide. The optical signal is modulated by radio-frequency (RF) signal applied on the Au electrodes at the top of MOS capacitor and contacting the In$_2$O$_3$ thin film. The record-high modulation bandwidth of >40 GHz is realized by a silicon-doping-free met…
Recent experiments have shown that spatial dispersion may have a conspicuous impact on the response of plasmonic structures. This suggests that in some cases the Drude model should be replaced by more advanced descriptions that take spatial dispersion into account, like the hydrodynamic model. Here we show that nonlocality in the metallic response affects surface plasmons propagating at the interface between a metal and a dielectric with high permittivity. As a direct consequence, any nanoparticle with a radius larger than 20 nm can be expected to be sensitive to spatial dispersion whatever it…
We report a novel design of a compact wavelength add-drop multiplexer utilizing dielectric-loaded surface plasmon-polariton waveguides (DLSPPWs). The DLSPPW-based configuration exploits routing properties of directional couplers and filtering abilities of Bragg gratings. We present practical realization of a 20-$μ$m-long device operating at telecom wavelengths that can reroute optical signals separated by approximately 70 nm in the wavelength band. We characterize the performance of the fabricated structures using scanning near-field optical microscopy as well as leakage-radiation microscopy a…
In this paper, we describe the implementation of leakage radiation microscopy (LRM) to probe the chirality of plasmonic nanostructures. We demonstrate experimentally spin-driven directional coupling as well as vortex generation of surface plasmon polaritons (SPPs) by nanostructures built with T-shaped and $Λ$- shaped apertures. Using this far-field method, quantitative inspections, including directivity and extinction ratio measurements, are achieved via polarization analysis in both image and Fourier planes. To support our experimental findings, we develop an analytical model based on a multi…
We propose a technique to control the beam direction of a dielectric optical micro-prism structure by properly designing its geometry. We show that by selectively choosing the slope of a high index micro prism, the direction of the radiated beam from the tip can be controlled in the broadside direction of the prism structure. We propose an easy fabrication method to integrate such broadside beam routers on a Si platform. We also propose a demonstrate a technique to build the beam router on an elastic PDMS platform which demonstrates stress induced beam scanning in the broadside This specific f…
We study a plasmonic coupler involving backward (TM_01) and forward (HE_11) modes of dielectric waveguides embedded into infinite metal. The simultaneously achievable contradirectional energy flows and codirectional wavevectors in different channels lead to a spectral gap, despite the absence of periodic structures along the waveguide. We demonstrate that a complete spectral gap can be achieved in a symmetric structure composed of four coupled waveguides.
The modified rigorous coupled-wave analysis technique is developed to describe the optical characteristics of the plasmonic structures with the grating-gated delta-thin conductive channel in the far- and near-field zones of electromagnetic waves. The technique was applied for analysis of the resonant properties of AlGaN/GaN heterostructures combined with deeply-subwavelength metallic grating which facilitates the excitation of the two-dimensional plasmons in the THz frequency range. The convergence of the calculations at the frequencies near the plasmon resonances is discussed. The impact of t…
Plasmonic waveguides based on 2D materials, which enable the formations of guided modes confined around few-layered material, are promising plasmonic platforms for the miniaturization of photonic devices. Nonetheless, such waveguides support modes that are evanescent in the waveguide core with the majority of the fields concentrated around waveguide edges, which are different from those supported by 3D dielectric waveguides where the modal fields are of oscillatory nature and peak at the center. As a result, many photonic devices and functionalities that can be achieved within 3D dielectric wa…
We propose a scheme for the coupler-free excitation of surface polaritonic solitons and breathers in a planar plasmonic waveguide structure comprising of a transparent layer, a metal layer and a layer of three-level lambda-type atomic medium. In the proposed system, an enhanced Kerr nonlinearity is achieved via electromagnetically induced transparency (EIT) in the bottom atomic medium, which can be controlled through proper modulation of the frequency detunings and Rabi frequencies of the driving laser fields. This nonlinearity balances the dispersion in the system, thus providing the necessar…
Hyperbolic metamaterials (HMMs) represent a novel class of fascinating anisotropic plasmonic materials, supporting highly confined propagating plasmon polaritons in addition to surface plasmon polaritons. However, it is very challenging to tailor and excite these modes at optical frequencies by prism coupling because of the intrinsic difficulties in engineering non-traditional optical properties with artificial nanostructures and the unavailability of high refractive index prisms for matching the momentum between the incident light and the guided modes. Here, we report the mechanism of excitat…
Advances in graphene plasmonics offer numerous opportunities for enabling the design and manufacture of a variety of nanoelectronics and other exciting optical devices. However, due to the limitation of material properties, its operating frequency cannot drop to the microwave range. In this work, a new concept of microwave equivalent graphene based on the ultrathin monolayer plasmonic metasurface is proposed and demonstrated. Based on this concept, elliptical and hyperbolic dispersion can be theoretically obtained by stacking the equivalent graphene metasurfaces periodically. As proofs of the …
This work aims to design a CMOS compatible, low-electrical power consumption modulator assisted by plasmons. For compactness and reduction of the electrical power consumption, electro-absorption based on the Franz-Keldysh effect in Germanium was chosen for modulation. It consists in the change of the absorption coefficient of the material near the band edge under the application of a static electric field, hence producing a direct modulation of the light intensity. The use of plasmons allows enhancing the electro-optical effect due to the high field confinement. An integrated electro-optical s…
