Spin-Phonon coupling parameters from maximally localized Wannier functions and first principles electronic structure: the case of durene single crystal
Spin-orbit interaction is an important vehicle for spin relaxation. At finite temperature lattice vibrations modulate the spin-orbit interaction and thus generate a mechanism for spin-phonon coupling, which needs to be incorporated in any quantitative analysis of spin transport. Starting from a density functional theory \textit{ab initio} electronic structure, we calculate spin-phonon matrix elements over the basis of maximally localized Wannier functions. Such coupling terms form an effective Hamiltonian to be used to extract thermodynamic quantities, within a multiscale approach particularly suitable for organic crystals. The symmetry of the various matrix elements are analyzed by using the $Γ$-point phonon modes of a one-dimensional chain of Pb atoms. Then the method is employed to extract the spin-phonon coupling of solid durene, a high-mobility crystal organic semiconducting. Owing to the small masses of carbon and hydrogen spin-orbit is weak in durene and so is the spin-phonon coupling. Most importantly we demonstrate that the largest contribution to the spin-phonon interaction originates from Holstein-like phonons, namely from internal molecular vibrations.
The maximally localized Wannier functions play a very important role in the study of chemical bonding, ballistic transport and strongly-correlated system, etc. A significant development in this branch was made in 1997 and conjectured that the maximally localized Wannier functions are real. In this paper, we prove the conjecture. A key to this proof is that the real parts of complex Wannier functions equal to the algebraic average of two real Wannier functions and the spread functional of one of the two real Wannier functions is less than one of complex Wannier functions. If one starts with ini…
Maximally localized Wannier functions are widely used in electronic structure theory for analyses of bonding, electric polarization, orbital magnetization, and for interpolation. The state of the art method for their construction is based on the method of Marzari and Vanderbilt. One of the practical difficulties of this method is guessing functions (initial projections) that approximate the final Wannier functions. Here we present an approach based on optimized projection functions that can construct maximally localized Wannier functions without a guess. We describe and demonstrate this approa…
We show that an optimized projection functions method can automatically construct maximally localized Wannier functions even for bands with nontrivial topology. We demonstrate this method on a tight-binding model of a two-dimensional $\mathbb{Z}_2$ topological insulator, on a three-dimensional strong $\mathbb{Z}_2$ topological insulator, as well as on first-principles density functional theory calculated valence states of Bi$_2$Se$_3$. In all cases, the resulting Wannier functions contain large imaginary components and are more extended than those in the topologically trivial phase.
We use the maximally-localized Wannier function method to study bonding properties in amorphous silicon. This study represents, to our knowledge, the first application of the Wannier-function analysis to a disordered system. Our results show that, in the presence of disorder, this method is extremely helpful in providing an unambiguous picture of the bond distribution. In particular, defect configurations can be studied and characterized with a novel degree of accuracy that was not available before.
We present a new code to evaluate thermoelectric and electronic transport properties of extended systems with a maximally-localized Wannier function basis set. The semiclassical Boltzmann transport equations for the homogeneous infinite system are solved in the constant relaxation-time approximation and band energies and band derivatives are obtained via Wannier interpolations. Thanks to the exponential localization of the Wannier functions obtained, very high accuracy in the Brillouin zone integrals can be achieved with very moderate computational costs. Moreover, the analytical expression fo…
We present Wannier90, a program for calculating maximally-localised Wannier functions (MLWF) from a set of Bloch energy bands that may or may not be attached to or mixed with other bands. The formalism works by minimising the total spread of the MLWF in real space. This done in the space of unitary matrices that describe rotations of the Bloch bands at each k-point. As a result, Wannier90 is independent of the basis set used in the underlying calculation to obtain the Bloch states. Therefore, it may be interfaced straightforwardly to any electronic structure code. The locality of MLWF can be e…
We have developed a linear scaling algorithm for calculating maximally-localized Wannier functions (MLWFs) using atomic orbital basis. An O(N) ground state calculation is carried out to get the density matrix (DM). Through a projection of the DM onto atomic orbitals and a subsequent O(N) orthogonalization, we obtain initial orthogonal localized orbitals. These orbitals can be maximally localized in linear scaling by simple Jacobi sweeps. Our O(N) method is validated by applying it to water molecule and wurtzite ZnO. The linear scaling behavior of the new method is demonstrated by computing the…
Maximally localized Wannier functions are localized orthogonal functions that can accurately represent given Bloch eigenstates of a periodic system at a low computational cost, thanks to the small size of each orbital. Tight-binding models based on the maximally localized Wannier functions obtained from different systems are often combined to construct tight-binding models for large systems such as a semi-infinite surface. However, the corresponding maximally localized Wannier functions in the overlapping region of different systems are not identical, and this discrepancy can introduce serious…
We report on the implementation of the Wannier Functions (WFs) formalism within the full-potential linearized augmented plane wave method (FLAPW), suitable for bulk, film and one-dimensional geometries. The details of the implementation, as well as results for the metallic SrVO3, ferroelectric BaTiO3 grown on SrTiO3, covalently bonded graphene and a one-dimensional Pt-chain are given. We discuss the effect of spin-orbit coupling on the Wannier Functions for the cases of SrVO3 and platinum. The dependency of the WFs on the choice of the localized trial orbitals as well as the difference between…
The electronic ground state of a periodic crystalline solid is usually described in terms of extended Bloch orbitals; localized Wannier functions can alternatively be used. These two representations are connected by families of unitary transformations, carrying a large degree of arbitrariness. We have developed a localization algorithm that allows one to iteratively transform the extended Bloch orbitals of a first-principles calculation into a unique set of maximally localized Wannier functions. We apply this formalism here to the case of cubic BaTiO3. The purpose is twofold. First, a localize…
We have combined large-scale, $Γ$-point electronic-structure calculations with the maximally-localized Wannier functions approach to calculate efficiently the band structure and the quantum conductance of complex systems containing thousands of atoms while maintaining full first-principles accuracy. We have applied this approach to study covalent functionalizations in metallic single-walled carbon nanotubes. We find that the band structure around the Fermi energy is much less dependent on the chemical nature of the ligands than on the $sp^3$ functionalization pattern disrupting the conjugation…
We present a robust algorithm that computes (maximally localized) Wannier functions (WFs) without the need of providing an initial guess. Instead, a suitable starting point is constructed automatically from so-called local orbitals which are fundamental building blocks of the basis set within (linearized) augmented planewave methods. Our approach is applied to a vast variety of materials such as metals, bulk and low-dimensional semiconductors, and complex inorganic-organic hybrid interfaces. For the interpolation of electronic single-particle energies, an accuracy in the meV range can be easil…
The electronic ground state of a periodic system is usually described in terms of extended Bloch orbitals, but an alternative representation in terms of localized "Wannier functions" was introduced by Gregory Wannier in 1937. The connection between the Bloch and Wannier representations is realized by families of transformations in a continuous space of unitary matrices, carrying a large degree of arbitrariness. Since 1997, methods have been developed that allow one to iteratively transform the extended Bloch orbitals of a first-principles calculation into a unique set of maximally localized Wa…
We discuss a method for determining the optimally-localized set of generalized Wannier functions associated with a set of Bloch bands in a crystalline solid. By ``generalized Wannier functions'' we mean a set of localized orthonormal orbitals spanning the same space as the specified set of Bloch bands. Although we minimize a functional that represents the total spread sum_n [ <r^2>_n - <r>_n^2 ] of the Wannier functions in real space, our method proceeds directly from the Bloch functions as represented on a mesh of k-points, and carries out the minimization in a space of unitary matrices U_mn^…
We present an implementaion of interface between the full-potential linearized augmented plane wave package Wien2k and the wannier90 code for the construction of maximally localized Wannier functions. The FORTRAN code and a documentation is made available and results are discussed for SrVO$_3$, Sr$_2$IrO$_4$ (including spin-orbit coupling), LaFeAsO, and FeSb$_2$.
Using a realistic tight-binding Hamiltonian based on maximally localized Wannier functions, we investigate the two-ion magnetocrystalline anisotropy energy (MAE) in $L1_0$ transition metal compounds. MAE contributions from throughout the Brillouin zone are obtained using magnetic force theorem calculations with and without perturbation theory. The results from either method agree with one another, and both reflect features of the Fermi surface. The intra-sublattice and inter-sublattice contributions to MAE are evaluated using a Green's function method. We find that the sign of the inter-sublat…
The EPW (Electron-Phonon coupling using Wannier functions) software is a Fortran90 code that uses density-functional perturbation theory and maximally localized Wannier functions for computing electron-phonon couplings and related properties in solids accurately and efficiently. The EPW v4 program can be used to compute electron and phonon self-energies, linewidths, electron-phonon scattering rates, electron-phonon coupling strengths, transport spectral functions, electronic velocities, resistivity, anisotropic superconducting gaps and spectral functions within the Migdal-Eliashberg theory. Th…
We have calculated the maximally-localized Wannier functions of MnO in its antiferromagnetic (AFM) rhombohedral unit cell, which contains two formula units. Electron Bloch functions are obtained with the linearized augmented plane-wave method within both the LSD and the LSD+U schemes. The thirteen uppermost occupied spin-up bands correspond in a pure ionic scheme to the five Mn 3d orbitals at the Mn_1 (spin-up) site, and the four O 2s/2p orbitals at each of the O_1 and O_2 sites. Maximal localization identifies uniquely four Wannier functions for each O, which are trigonally-distorted sp^3-lik…
We present a method for obtaining well-localized Wannier-like functions (WFs) for energy bands that are attached to or mixed with other bands. The present scheme removes the limitation of the usual maximally-localized WFs method (N. Marzari and D. Vanderbilt, Phys. Rev. B 56, 12847 (1997)) that the bands of interest should form an isolated group, separated by gaps from higher and lower bands everywhere in the Brillouin zone. An energy window encompassing N bands of interest is specified by the user, and the algorithm then proceeds to disentangle these from the remaining bands inside the window…
We report a theoretical scheme that enables the calculation of maximally localized Wannier functions in the formalism of projector-augmented-waves (PAW) which also includes the ultrasoft-pseudopotential (USPP) approach. We give a description of the basic underlying formalism and explicitly write all the required matrix elements from the common ingredients of the PAW/USPP theory. We report an implementation of the method in a form suitable to accept the input electronic structure from USPP plane-wave DFT simulations. We apply the method to the calculation of Wannier functions, dipole moments an…
EPW (Electron-Phonon coupling using Wannier functions) is a program written in FORTRAN90 for calculating the electron-phonon coupling in periodic systems using density-functional perturbation theory and maximally-localized Wannier functions. EPW can calculate electron-phonon interaction self-energies, electron-phonon spectral functions, and total as well as mode-resolved electron-phonon coupling strengths. The calculation of the electron-phonon coupling requires a very accurate sampling of electron-phonon scattering processes throughout the Brillouin zone, hence reliable calculations can be pr…
Wannier function expansions are well suited for the description of photonic- crystal-based defect structures, but constructing maximally localized Wannier functions by optimizing the phase degree of freedom of the Bloch modes is crucial for the efficiency of the approach. We systematically analyze different locality criteria for maximally localized Wannier functions in two- dimensional square and triangular lattice photonic crystals, employing (local) conjugate-gradient as well as (global) genetic-algorithm-based, stochastic methods. Besides the commonly used second moment (SM) locality measur…
Density functional study of strain effects on the electronic band structure and transport prop- erties of the graphene nanoribbons (GNR) is presented. We apply a uniaxial strain in the x (nearest-neighbor) and y (second nearest-neighbor) directions, related to the deformation of zigzag and armchair edge GNRs (AGNR and ZGNR), respectively. We calculate the quantum conduc- tance and band structures of the GNR using the Wannier function in a strain range from -8% to +8% (minus and plus signs show compression and tensile strain). As strain increases, depending on the AGNR family type, the electric…
We review the formalisms of the self-consistent GW approximation to many-body perturbation theory and of the generation of optimally-localized Wannier functions from groups of energy bands. We show that the quasiparticle Bloch wave functions from such GW calculations can be used within this Wannier framework. These Wannier functions can be used to interpolate the many-body band structure from the coarse mesh of Brillouin zone points on which it is known from the initial calculation to the usual symmetry lines, and we demonstrate that this procedure is accurate and efficient for the self-consis…
We propose an algorithm to determine Maximally Localized Wannier Functions (MLWFs). This algorithm, based on recent theoretical developments, does not require any physical input such as initial guesses for the Wannier functions, unlike popular schemes based on the projection method. We discuss how the projection method can fail on fine grids when the initial guesses are too far from MLWFs. We demonstrate that our algorithm is able to find localized Wannier functions through tests on two-dimensional systems, simplified models of semiconductors, and realistic DFT systems by interfacing with the …
We investigate a recently developed approach [P. L. Silvestrelli, Phys. Rev. Lett. 100, 053002 (2008); J. Phys. Chem. A 113, 5224 (2009)] that uses maximally localized Wannier functions to evaluate the van der Waals contribution to the total energy of a system calculated with density-functional theory. We test it on a set of atomic and molecular dimers of increasing complexity (argon, methane, ethene, benzene, phthalocyanine, and copper phthalocyanine) and demonstrate that the method, as originally proposed, has a number of shortcomings that hamper its predictive power. In order to overcome th…
We present a method to compute the intrinsic spin Hall conductivity from first principles using an interpolation scheme based on maximally-localized Wannier functions. After obtaining the relevant matrix elements among the ab initio Bloch states calculated on a coarse k-point mesh, we Fourier transform them to find the corresponding matrix elements between Wannier states. We then perform an inverse Fourier transform to interpolate the velocity and spin-current matrix elements onto a dense k-point mesh, and use them to evaluate the spin Hall conductivity as a Brillouin-zone integral. This strat…
Meta-optimization of maximally-localized Wannier functions
Oden Institute for Computational Engineering and Sciences, The University of Texas at Austin（德克萨斯大学奥斯汀分校奥登计算工程与科学研究所）；Department of Physics, The University of Texas at Austin（德克萨斯大学奥斯汀分校物理系）
Maximally localized Wannier functions (MLWFs) based on Kohn-Sham band-structures provide a systematic way to construct realistic, materials specific tight-binding models for further theoretical analysis. Here, we construct MLWFs for the Mn e_g bands in LaMnO_3, and we monitor changes in the MLWF matrix elements induced by different magnetic configurations and structural distortions. From this we obtain values for the local Jahn-Teller and Hund's rule coupling strength, the hopping amplitudes between all nearest and further neighbors, and the corresponding reduction due to the GdFeO_3-type dist…
Construction of maximally localized Wannier functions (MLWFs) has been implemented within the linear combination of pseudo-atomic orbital (LCPAO) method. Detailed analysis using MLWFs is applied to three closely related materials, single benzene (Bz) molecule, organometallic Vanadium-Bz infinite chain, and V$_2$Bz$_{3}$ sandwich cluster. Two important results come out from the present analysis: 1) for the infinite chain, the validity of the basic assumption in the mechanism of Kanamori and Terakura for the ferromagnetic (FM) state stability is confirmed; 2) for V$_2$Bz$_3$, an important role p…
Real-time, time-dependent density functional theory (RT-TDDFT) has gained popularity as a first-principles approach to study a variety of excited-state phenomena such as optical excitations and electronic stopping. Within RT-TDDFT simulations, the gauge freedom of the time-dependent electronic orbitals can be exploited for numerical and scientific convenience while the unitary transformation does not alter physical properties calculated from the quantum dynamics of electrons. Exploiting this gauge freedom, we demonstrate propagation of maximally localized Wannier functions within RT-TDDFT. We …
A robust, user-friendly, and automated method to determine quantum conductance in disordered quasi-one-dimensional systems is presented. The scheme relies upon an initial density- functional theory calculation in a specific geometry after which the ground-state eigenfunctions are transformed to a maximally-localised Wannier function (MLWF) basis. In this basis, our novel algorithms manipulate and partition the Hamiltonian for the calculation of coherent electronic transport properties within the Landauer-Buttiker formalism. Furthermore, we describe how short- ranged Hamiltonians in the MLWF ba…
We present an alternative formalism for calculating the maximally localized Wannier functions in crystalline solids, obtaining an expression which is extremely simple and general. In particular, our scheme is exactly invariant under Brillouin zone folding, and therefore it extends trivially to the Gamma-point case. We study the convergence properties of the Wannier functions, their quadratic spread and centers as obtained by our simplified technique. We show how this convergence can be drastically improved by a simple and inexpensive ``refinement'' step, which allows for very efficient and acc…
We investigate the electronic structure of over-coordinated defects in amorphous silicon via density-functional total-energy calculations, with the aim of understanding the relationship between topological and electronic properties on a microscopic scale. Maximally-localized Wannier functions are computed in order to characterize the bonding and the electronic properties of these defects. The five-fold coordination defects give rise to delocalized states extending over several nearest neighbors, and therefore to very polarizable bonds and anomalously high Born effective charges for the defecti…
We have constructed maximally-localized Wannier functions for prototype structures of solid molecular hydrogen under pressure, starting from LDA and tight-binding Bloch wave functions. Each occupied Wannier function can be associated with two paired protons, defining a ``Wannier molecule''. The sum of the dipole moments of these ``molecules'' always gives the correct macroscopic polarization, even under strong compression, when the overlap between nearby Wannier functions becomes significant. We find that at megabar pressures the contributions to the dipoles arising from the overlapping tails …
Spin-orbit coupling in organic crystals is responsible for many spin-relaxation phenomena, going from spin diffusion to intersystem crossing. With the goal of constructing effective spin-orbit Hamiltonians to be used in multiscale approaches to the thermodynamical properties of organic crystals, we present a method that combines density functional theory with the construction of Wannier functions. In particular we show that the spin-orbit Hamiltonian constructed over maximally localised Wannier functions can be computed by direct evaluation of the spin-orbit matrix elements over the Wannier fu…
Ubiquitous Van der Waals interactions between atoms and molecules are important for many molecular and solid structures. These systems are often studied from first principles using the Density Functional Theory (DFT). However, the commonly used DFT functionals fail to capture the essence of Van der Waals effects. Many attempts to correct for this problem have been proposed, which are not completely satisfactory because they are either very complex and computationally expensive or have a basic semiempirical character. We here describe a novel approach, based on the use of the Maximally-Localize…
We have developed a practical scheme to construct partly occupied, maximally localized Wannier functions (WFs) for a wide range of systems. We explain and demonstrate how the inclusion of selected unoccupied states in the definition of the WFs can improve both their localization and symmetry properties. A systematic selection of the relevant unoccupied states is achieved by minimizing the spread of the resulting WFs. The method is applied to a silicon cluster, a copper crystal, and a Cu(100) surface with nitrogen adsorbed. In all cases we demonstrate the existence of a set of WFs with particul…
We present a new scheme to include the van der Waals (vdW) interactions in approximated Density Functional Theory (DFT) by combining the Quantum Harmonic Oscillator model with the Maximally Localized Wannier Function technique. With respect to the recently developed DFT/vdW-WF2 method, also based on Wannier Functions, the new approach is more general, being no longer restricted to the case of well separated interacting fragments. Moreover, it includes higher than pairwise energy contributions, coming from the dipole--dipole coupling among quantum oscillators. The method is successfully applied…
Computing electron-defect (e-d) interactions from first principles has remained impractical due to computational cost. Here we develop an interpolation scheme based on maximally localized Wannier functions (WFs) to efficiently compute e-d interaction matrix elements. The interpolated matrix elements can accurately reproduce those computed directly without interpolation, and the approach can significantly speed up calculations of e-d relaxation times and defect-limited charge transport. We show example calculations of vacancy defects in silicon and copper, for which we compute the e-d relaxatio…
We describe and implement a first-principles algorithm based on maximally-localized Wannier functions for calculating the shift-current response of piezoelectric crystals in the independent-particle approximation. The proposed algorithm presents several advantages over existing ones, including full gauge invariance, low computational cost, and a correct treatment of the optical matrix elements with nonlocal pseudopotentials. Band-truncation errors are avoided by a careful formulation of $k\cdot p$ perturbation theory within the subspace of wannierized bands. The needed ingredients are the matr…
We present an efficient first-principles approach for calculating Fermi surface averages and spectral properties of solids, and use it to compute the low-field Hall coefficient of several cubic metals and the magnetic circular dichroism of iron. The first step is to perform a conventional first-principles calculation and store the low-lying Bloch functions evaluated on a uniform grid of k-points in the Brillouin zone. We then map those states onto a set of maximally-localized Wannier functions, and evaluate the matrix elements of the Hamiltonian and the other needed operators between the Wanni…
We present a first-principles scheme that allows the orbital magnetization of a magnetic crystal to be evaluated accurately and efficiently even in the presence of complex Fermi surfaces. Starting from an initial electronic-structure calculation with a coarse ab initio k-point mesh, maximally localized Wannier functions are constructed and used to interpolate the necessary k-space quantities on a fine mesh, in parallel to a previously-developed formalism for the anomalous Hall conductivity [X.Wang, J. Yates, I. Souza, and D. Vanderbilt, Phys. Rev. B 74, 195118 (2006)]. We formulate our new app…
We introduce a scheme for constructing partly occupied, maximally localized Wannier functions (WFs) for both molecular and periodic systems. Compared to the traditional occupied WFs the partly occupied WFs posses improved symmetry and localization properties achieved through a bonding-antibonding closing procedure. We demonstrate the equivalence between bonding-antibonding closure and the minimization of the average spread of the WFs in the case of a benzene molecule and a linear chain of Pt atoms. The general applicability of the method is demonstrated through the calculation of WFs for a met…
\textit{Ab-initio} calculation of intrinsic spin Hall conductivity (SHC) generally requires a strict convergence criterion and a dense k-point mesh to sample the Brillouin zone, making its convergence challenging and time-consuming. Here we present a scheme for efficiently and accurately calculating SHC based on maximally localized Wannier function (MLWF). The quantities needed by the Kubo formula of SHC are derived in the space of MLWF and it is shown that only the Hamiltonian, the overlap and the spin operator matrices are required from the initial \textit{ab-initio} calculation. The computa…
Localized Wannier functions provide an efficient and intuitive means by which to compute dielectric properties from first principles. They are most commonly constructed in a post-processing step, following total-energy minimization. Nonorthogonal generalized Wannier functions (NGWFs) [Skylaris et al., Phys. Rev. B 66, 035119 11 (2002); Skylaris et al., J. Chem. Phys. 122, 084119 (2005)] may also be optimized in situ, in the process of solving for the ground-state density. We explore the relationship between NGWFs and orthonormal, maximally localized Wannier functions (MLWFs) [Marzari and Vande…
Many-body calculations for multi-orbital systems at present typically employ Slater or Kanamori interactions which implicitly assume a full rotational invariance of the orbitals, whereas the real crystal has a lower symmetry. In cubic symmetry, the low-energy $t_{2g}$ orbitals have an on-site Kanamori interaction, albeit without the constraint $U = U' + 2J$ implied by spherical symmetry ($U$: intra-orbital interaction, $U'$: inter-orbital interaction, $J$: Hund's exchange). Using maximally localized Wannier functions we show that deviations from the standard, spherically symmetric interactions…
Within this paper we outline a method able to generate truly minimal basis sets which describe either a group of bands, a band, or even just the occupied part of a band accurately. These basis sets are the so-called NMTOs, Muffin Tin Orbitals of order N. For an isolated set of bands, symmetrical orthonormalization of the NMTOs yields a set of Wannier functions which are atom-centered and localized by construction. They are not necessarily maximally localized, but may be transformed into those Wannier functions. For bands which overlap others, Wannier-like functions can be generated. It is show…
The intrinsic anomalous Hall effect in ferromagnets depends on subtle spin-orbit-induced effects in the electronic structure, and recent ab-initio studies found that it was necessary to sample the Brillouin zone at millions of k-points to converge the calculation. We present an efficient first-principles approach for computing the anomalous Hall conductivity. We start out by performing a conventional electronic-structure calculation including spin-orbit coupling on a uniform and relatively coarse k-point mesh. From the resulting Bloch states, maximally-localized Wannier functions are construct…
