On Determining Dead Layer and Detector Thicknesses for a Position-Sensitive Silicon Detector
J. Manfredi, Jenny Lee, W. G. Lynch, C. Y. Niu, M. B. Tsang, C. Anderson, J. Barney, K. W. Brown, Z. Chajecki, K. P. Chan, G. Chen, J. Estee, Z. Li, C. Pruitt, … 展开作者
J. Manfredi, Jenny Lee, W. G. Lynch, C. Y. Niu, M. B. Tsang, C. Anderson, J. Barney, K. W. Brown, Z. Chajecki, K. P. Chan, G. Chen, J. Estee, Z. Li, C. Pruitt, A. M. Rogers, A. Sanetullaev, H. Setiawan, R. Showalter, C. Y. Tsang, J. R. Winkelbauer, Z. Xiao, Z. Xu
备注:
Accepted for publication in Nuclear Instruments and Methods in Physics Research
In this work, two particular properties of the position-sensitive, thick silicon detectors (known as the "E" detectors) in the High Resolution Array (HiRA) are investigated: the thickness of the dead layer on the front of the detector, and the overall thickness of the detector itself. The dead layer thickness for each E detector in HiRA is extracted using a measurement of alpha particles emitted from a $^{212}$Pb pin source placed close to the detector surface. This procedure also allows for energy calibrations of the E detectors, which are otherwise inaccessible for alpha source calibration as each one is sandwiched between two other detectors. The E detector thickness is obtained from a combination of elastically scattered protons and an energy-loss calculation method. Results from these analyses agree with values provided by the manufacturer.
Inter-pad dead regions of irradiated FBK Low Gain Avalanche Detectors
低增益雪崩探测器(LGAD)是一种具有高掺杂增益层的薄硅探测器。由Fondazione Bruno Kessler(FBK)制造的LGAD在中子辐照前后进行了测试。在本研究中,使用TCT激光系统测量焊盘间距离(IPD),定义为焊盘之间距离的宽度。使用来自90 Sr源的$β$粒子调谐激光器的响应。这些不敏感的“死区”是由保护结构产生的,以避免击穿,连接端接扩展(JTE),它将焊盘分开。研究了\fluence{1.5}{15}和\fluence{2.5}{15}的中子辐射损伤对IPD的影响。将这些距离与供应商给出的标称距离进行比较,发现更高的通量对应于标称IPD的更好匹配。
Performance studies of a pixel tracker in the Silicon Detector (SiD) concept for a future linear collider
使用SiD探测器的模拟框架来研究Higgs -> mumu衰变通道,表明可以通过提高带电粒子动量分辨率来实现信号显著性的显著增益。然而,对Z-> mumu衰减通道的更详细的模拟表明,通过增加跟踪器粒度无法实现分辨率的显着提高。相反,使用寿命较长的粒子对缺失/死顶点层进行的探测器稳定性研究显示了轨道分辨率的增加。现有的9.15 cm x 25 μm硅条几何形状被100 x 100微米硅像素取代,将次级顶点分辨率提高了100倍。通过使用密集射流对高度准直事件进行的研究表明,动量分辨率可以提高2倍,大大提高了信号的重要性,但需要将像素大小减小到25微米。将跟踪器粒度从9.15 cm条带升级到微米尺寸的像素需要增加传感器通道的数量和复杂性,但在大多数线性对撞机物理学中仅提供小的改进。
On the performance of large monolithic LaCl3(Ce) crystals coupled to pixelated silicon photosensors
我们调查的大面积辐射探测器的性能,具有高能量和空间分辨率,旨在开发的总能量探测器与伽马射线成像能力,所谓的i-TED。这一新的发展旨在提高飞行时间中子捕获测量的探测灵敏度,而不是常用的C6 D 6液体闪烁总能量探测器。在这项工作中,我们详细研究了读出光电传感器的能量响应的大面积(5050平方毫米)单片氯化镧(Ce)晶体的影响,特别是当取代传统的单阴极光电倍增管的88像素化的硅光电倍增器。使用最大的商用单片SiPM阵列(25 cm 2),像素尺寸为66 mm 2,我们测量了晶体厚度为10,20和30 mm的平均能量分辨率为3.92% FWHM(662 keV)。其中光学过程和特性都被包括以用于闪烁光子的可靠跟踪。在对MC模型进行实验验证后,我们使用我们的MC代码来探索不同光电传感器分割(像素大小和粒度)对能量分辨率的影响。我们的光学MC模拟预测只有边际恶化的光谱性能为33平方毫米的像素。
Experimental Study of Different Silicon Sensor Options for the Upgrade of the CMS Outer Tracker
在计划于2027年左右开始的大型强子对撞机(HL-LHC)的高光度阶段,加速器预计将提供高达$7.5\times10^{34}$ cm $^{-2}$ s $^{-1}$的瞬时峰值光度。预计在未来十年内,$3000$或甚至$4000$ ~fb $^{-1}$的总积分亮度将被交付给通用探测器ATLAS和CMS,从而显著增加LHC实验的发现潜力。CMS探测器将为HL-LHC进行重大升级,全新的跟踪探测器由外部跟踪器和内部跟踪器组成。然而,新的跟踪系统将暴露在比当前跟踪器高得多的辐射下,需要新的抗辐射传感器。CMS从2009年开始发起了一项广泛的辐照和测量活动,系统地比较不同硅材料的特性和外跟踪器传感器的设计选择。在18种不同的晶圆材料、厚度和生产技术组合上设计并实现了几种测试结构和传感器。在用中子和不同能量的质子辐照之前和之后,对装置进行电气表征,其中通量对应于在$3000$ ~fb $^{-1}$之后CMS外跟踪器的不同半径处预期的通量。所执行的测试包括使用$β$源、激光和光束扫描的研究。本文比较了HL-LHC硅传感器的不同选择的性能,重点是硅块材料和厚度。
Characterization of Low-energy Ionization Signals in Silicon Detectors for the Nab Experiment
North Carolina State University(北卡罗来纳州立大学);Triangle Universities Nuclear Laboratory(三角大学核实验室);University of Manitoba(曼尼托巴大学);Los Alamos National Laboratory(洛斯阿拉莫斯国家实验室);University of Virginia(弗吉尼亚大学);Oak Ridge National Laboratory(橡树岭国家实验室)
A Hydrogenated Amorphous Silicon Photodiode indirect flexible device for radiation flux measurements at low intensities
INFN, Sez. di Perugia(意大利国家核物理研究所佩鲁贾分部);Centre for Medical Radiation Physics, University of Wollongong(伍伦贡大学医学辐射物理中心);Najran University, Faculty of Arts and Sciences, Department of Physics(纳季兰大学文理学院物理系);Dip. di Fisica e Geologia dell’Università degli Studi di Perugia(佩鲁贾大学物理与地质学系);Department of Mathematics and Physics "Ennio de Giorgi" University of Salento(莱切恩尼奥德乔治数学与物理系);INFN Sezione di Lecce(意大利国家核物理研究所莱切分部);Dipartimento Ingegneria dell’Informazione, Elettronica e Telecomunicazioni, dell’Università degli studi di Roma(罗马大学信息与电子通信工程系);INFN Sezione di Roma 1(意大利国家核物理研究所罗马第一分部);INFN-LNL(意大利国家核物理研究所-国家实验室);Dipartimento di Fisica e Astronomia Università di Padova(帕多瓦大学物理与天文学系);INFN TIFPA and Dipartimento di ingegneria industriale dell’Università di Trento(意大利国家核物理研究所TIFPA及特伦托大学工业工程系);Ecole Polytechnique Fédérale de Lausanne (EPFL)(洛桑联邦理工学院);DiSPeA, Università di Urbino Carlo Bo(乌尔比诺卡洛博大学DISPeA);INFN Sezione di Firenze(意大利国家核物理研究所佛罗伦萨分部);Dipartimento di Scienze Biomediche sperimentali e Cliniche “Mario Serio”, University of Florence(佛罗伦萨马里奥塞里奥实验与临床生物科学系);Scuola di Ingegneria Aerospaziale Università degli studi di Roma(罗马大学航空航天工程学院);Dipartimento. di Ingegneria dell’Università degli studi di Perugia(佩鲁贾大学工程系);CNR Istituto Officina dei Materiali (IOM)(意大利国家研究委员会材料研究所)