The recent advanced wireless energy harvesting technology has enabled wireless-powered communications to accommodate wireless data services in a self-sustainable manner. However, wireless-powered communications rely on active RF signals to communicate, and result in high power consumption. On the other hand, ambient backscatter technology that passively reflects existing RF signal sources in the air to communicate has the potential to facilitate an implementation with ultra-low power consumption. In this paper, we introduce a hybrid D2D communication paradigm by integrating ambient backscattering with wireless-powered communications. The hybrid D2D communications are self-sustainable, as no dedicated external power supply is required. However, since the radio signals for energy harvesting and for backscattering come from the ambient, the performance of the hybrid D2D communications depends largely on environment factors, e.g., distribution, spatial density, and transmission load of ambient energy sources. Therefore, we design two mode selection protocols for the hybrid D2D transmitter, allowing a more flexible adaptation to the environment. We then introduce analytical models to characterize the impacts of the considered environment factors on the hybrid D2D communication performance. Together with extensive simulations, our analysis shows that the communication performance benefits from larger repulsion, transmission load and density of ambient energy sources. Further, we investigate how different mode selection mechanisms affect the communication performance.
Self-sustainable communications based on advanced energy harvesting technologies have been under rapid development, which facilitate autonomous operation and energy-efficient transmission. Recently, ambient backscattering that leverages existing RF signal resources in the air has been invented to empower data communication among low-power devices. In this paper, we introduce hybrid device-to-device (D2D) communications by integrating ambient backscattering and wireless-powered communications. The hybrid D2D communications are self-sustainable, as no dedicated external power supply is required.…
With conventional anti-jamming solutions like frequency hopping or spread spectrum, legitimate transceivers often tend to "escape" or "hide" themselves from jammers. These reactive anti-jamming approaches are constrained by the lack of timely knowledge of jamming attacks. Bringing together the latest advances in neural network architectures and ambient backscattering communications, this work allows wireless nodes to effectively "face" the jammer by first learning its jamming strategy, then adapting the rate or transmitting information right on the jamming signal. Specifically, to deal with un…
Ambient backscatter communication technology has been introduced recently, and is then quickly becoming a promising choice for self-sustainable communication systems as an external power supply or a dedicated carrier emitter is not required. By leveraging existing RF signal resources, ambient backscatter technology can support sustainable and independent communications and consequently open up a whole new set of applications that facilitate Internet-of-Things (IoT). In this article, we study an integration of ambient backscatter with wireless powered communication networks (WPCNs). We first pr…
Backscattering assisted wireless-powered communication combines ultralow-power backscatter transmitters with energy harvesting devices. This paper investigates the transmission mode selection problem of a hybrid relay that forwards data by switching between the active wireless-powered transmission and the passive ambient backscattering. It first presents a hybrid relay system model and derives its end-to-end success probability under theoretically optimal, but practically unrealistic, conditions. The transmission mode selection is then formulated as a stochastic two-armed bandit problem in a v…
For an RF-powered cognitive radio network with ambient backscattering capability, while the primary channel is busy, the RF-powered secondary user (RSU) can either backscatter the primary signal to transmit its own data or harvest energy from the primary signal (and store in its battery). The harvested energy then can be used to transmit data when the primary channel becomes idle. To maximize the throughput for the secondary system, it is critical for the RSU to decide when to backscatter and when to harvest energy. This optimal decision has to account for the dynamics of the primary channel, …
Future IoT networks consist of heterogeneous types of IoT devices (with various communication types and energy constraints) which are assumed to belong to an IoT service provider (ISP). To power backscattering-based and wireless-powered devices, the ISP has to contract with an energy service provider (ESP). This article studies the strategic interactions between the ISP and its ESP and their implications on the joint optimal time scheduling and energy trading for heterogeneous devices. To that end, we propose an economic framework using the Stackelberg game to maximize the network throughput a…
Ambient backscatter has been introduced with a wide range of applications for low power wireless communications. In this article, we propose an optimal and low-complexity dynamic spectrum access framework for RF-powered ambient backscatter system. In this system, the secondary transmitter not only harvests energy from ambient signals (from incumbent users), but also backscatters these signals to its receiver for data transmission. Under the dynamics of the ambient signals, we first adopt the Markov decision process (MDP) framework to obtain the optimal policy for the secondary transmitter, aim…
Internet-of-Things (IoT) is featured with low-power communications among a massive number of ubiquitously-deployed and energy-constrained electronics, e.g., sensors and actuators. To cope with the demand, wireless-powered cooperative relaying emerges as a promising communication paradigm to extend data transmission coverage and solve energy scarcity for the IoT devices. In this paper, we propose a novel hybrid relaying strategy by combining wireless-powered communication and ambient backscattering functions to improve applicability and performance of data transfer. In particular, the hybrid re…
Nanyang Technological University（南洋理工大学）；University of Electronic Science and Technology of China（电子科技大学）；Sungkyunkwan University（成均馆大学）
In an RF-powered backscatter cognitive radio network, multiple secondary users communicate with a secondary gateway by backscattering or harvesting energy and actively transmitting their data depending on the primary channel state. To coordinate the transmission of multiple secondary transmitters, the secondary gateway needs to schedule the backscattering time, energy harvesting time, and transmission time among them. However, under the dynamics of the primary channel and the uncertainty of the energy state of the secondary transmitters, it is challenging for the gateway to find a time schedul…
This letter introduces a novel wireless-powered backscatter communication system which allows sensors to utilize RF signals transmitted from a dedicated RF energy source to transmit data. In the proposed system, when the RF energy source transmits RF signals, the sensors are able to backscatter the RF signals to transmit date to the gateway and/or harvest energy from the RF signals for their operations. By integrating backscattering and energy harvesting techniques, we can optimize the network throughput of the system. In particular, we first formulate the time scheduling problem for the syste…
This paper enables connectivity on everyday objects by transforming them into FM radio stations. To do this, we show for the first time that ambient FM radio signals can be used as a signal source for backscatter communication. Our design creates backscatter transmissions that can be decoded on any FM receiver including those in cars and smartphones. This enables us to achieve a previously infeasible capability: backscattering information to cars and smartphones in outdoor environments. Our key innovation is a modulation technique that transforms backscatter, which is a multiplication operatio…
In this paper, we consider a wireless cooperative network with an energy harvesting relay which is powered by the energy harvested from ambient RF waves, such as that of a data packet. At any given time, the relay operates either in the energy harvesting (EH) mode or the data decoding (DD) mode, but not both. Separate energy and data buffers are kept at the relay to store the harvested energy and decoded data packets, respectively. In this paper, we optimize a time switching policy that switches between the EH mode and DD mode to maximize the system throughput or minimize the average transmiss…
Dynamic Spectrum Access for Ambient Backscatter Communication-assisted D2D Systems with Quantum Reinforcement Learning
Department of Electrical Engineering and Electronics, University of Liverpool（电气工程与电子系，利物浦大学）；School of Informatics, University of Edinburgh（信息学院，爱丁堡大学）；School of Engineering, University of Warwick（工程学院，沃里克大学）；Interdisciplinary Centre for Security, Reliability and Trust (SnT), the University of Luxembourg（安全、可靠性与信任跨学科研究中心（SnT），卢森堡大学）；School of Electrical and Data Engineering, University of Technology Sydney（电气与数据工程学院，悉尼技术大学）；College of Computing and Data Science, Nanyang Technological University（计算与数据科学学院，南洋理工大学）；School of Computer Science and Statistics, Trinity College Dublin, The University of Dublin（计算机科学与统计学学院，都柏林大学）
Communication range in passive Radio-Frequency Identification (RFID) front-end devices is a critical barrier in the real-world implementation of this low-cost technology. Purely passive RFID tags power up by harvesting the limited RF energy transmitted by the interrogator, and communicate by backscattering the incident signal. This mode of communication keeps manufacturing costs below a few cents per tag, but the limited power available at the tag undermines long-range deployment. In this paper, we present an approach to use Photovoltaics (PV) to augment the available energy at the tag to impr…
In this paper, we study the transmission strategy adaptation problem in an RF-powered cognitive radio network, in which hybrid secondary users are able to switch between the harvest-then-transmit mode and the ambient backscatter mode for their communication with the secondary gateway. In the network, a monetary incentive is introduced for managing the interference caused by the secondary transmission with imperfect channel sensing. The sensing-pricing-transmitting process of the secondary gateway and the transmitters is modeled as a single-leader-multi-follower Stackelberg game. Furthermore, t…
In this paper, we focus on a typical cooperative communication system with one pair of source and destination, where a unmanned aerial vehicle (UAV) flying from a start location to an end location serves as a mobile relay. To efficiently utilize energy in ambient environment, the UAV's transmission capability is powered exclusively by radio signal transmitted from the source via the power-splitting mechanism. In such a cooperative communication system, we study the end-to-end cooperative throughput maximization problem by optimizing the UAV's power profile, power-splitting ratio profile and tr…
User cooperation is an effective technique to tackle the severe near-far user unfairness problem in wireless powered communication networks (WPCNs). In this paper, we consider a WPCN where two collaborating wireless devices (WDs) first harvest wireless energy from a hybrid access point (HAP) and then transmit their information to the HAP. The WD with the stronger WD-to-HAP channel helps relay the message of the other weaker user. In particular, we exploit the use of ambient backscatter communication during the wireless energy transfer phase, where the weaker user backscatters the received ener…
