Advances in Wireless Sensor Network (WSN) have provided the availability of small and low-cost sensors with the capability of sensing various types of physical and environmental conditions, data processing, and wireless communication. Since WSN protocols are application specific, the focus has been given to the routing protocols that might differ depending on the application and network architecture. In this work, novel routing protocols have been proposed which is a cluster-based security protocol is named as Efficient and Secure Routing Protocol (ESRP) for WSN. The goal of ESRP is to provide an energy efficient routing solution with dynamic security features for clustered WSN. During the network formation, a node which is connected to a Personal Computer (PC) has been selected as a sink node. Once the sensor nodes were deployed, the sink node logically segregates the other nodes in a cluster structure and subsequently creates a WSN. This centralized cluster formation method is used to reduce the node level processing burden and avoid multiple communications. In order to ensure reliable data delivery, various security features have been incorporated in the proposed protocol such as Modified Zero-Knowledge Protocol (MZKP), Promiscuous hearing method, Trapping of adversaries and Mine detection. One of the unique features of this ESRP is that it can dynamically decide about the selection of these security methods, based on the residual energy of nodes.
An energy efficient routing protocol is the major attentiveness for researcher in field of Wireless Sensor Networks (WSNs). In this paper, we present some energy efficient hierarchal routing protocols, prosper from conventional Low Energy Adaptive Clustering Hierarchy (LEACH) routing protocol. Fundamental objective of our consideration is to analyze, how these ex- tended routing protocols work in order to optimize lifetime of network nodes and how quality of routing protocols is improved for WSNs. Furthermore, this paper also emphasizes on some issues experienced by LEACH and also explains how…
Energy efficient routing protocol for Wireless Sensor Networks (WSNs) is one of the most challenging task for researcher. Hierarchical routing protocols have been proved more energy efficient routing protocols, as compare to flat and location based routing protocols. Heterogeneity of nodes with respect to their energy level, has also added extra lifespan for sensor network. In this paper, we propose a Centralized Energy Efficient Clustering (CEEC) routing protocol. We design the CEEC for three level heterogeneous network. CEEC can also be implemented in multi-level heterogeneity of networks. F…
Wireless Sensor Networks (WSNs) with their dynamic applications gained a tremendous attention of researchers. Constant monitoring of critical situations attracted researchers to utilize WSNs at vast platforms. The main focus in WSNs is to enhance network life-time as much as one could, for efficient and optimal utilization of resources. Different approaches based upon clustering are proposed for optimum functionality. Network life-time is always related with energy of sensor nodes deployed at remote areas for constant and fault tolerant monitoring. In this work, we propose Quadrature-LEACH (Q-…
Energy efficient routing protocols are consistently cited as efficient solutions for Wireless Sensor Networks (WSNs) routing. The area of WSNs is one of the emerging and fast growing fields which brought low cost, low power and multi-functional sensor nodes. In this paper, we examine some protocols related to homogeneous and heterogeneous networks. To evaluate the efficiency of different clustering schemes, we compare five clustering routing protocols; Low Energy Adaptive Clustering Hierarchy (LEACH), Threshold Sensitive Energy Efficient Sensor Network (TEEN), Distributed Energy Efficient Clus…
Wireless Sensor Networks (WSNs) consist of sensor nodes which can be deployed for various operations such as agriculture and environmental sensing, wild life monitoring, health care, military surveillance, industrial control, home automation, security etc. Quality of Service (QoS) is an important issue in wireless sensor networks (WSNs) and providing QoS support in WSNs is an emerging area of research. Due to resource constraints nature of sensor networks like processing power, memory, bandwidth, energy etc. providing QoS support in WSNs is a challenging task. Delay is an important QoS paramet…
Wireless Sensor Networks (WSN) are set of energy-limited sensors, which recently have been point of interest due to their vast applications. One of the efficient ways to consume energy in these networks is to utilize optimal routing protocols. In this approach, we proposed a greedy hierarchical chain-based routing method, named, PGC (stands for Persian Greedy Chain) which route the network applying Spread Spectrum codes as a mask given to the grid cells. Due to similarities between the proposed method in this article and LEACH protocol, we compare this routing protocol with the proposed model …
Wireless Sensor Networks (WSNs) experiences several technical challenges such as limited energy, short transmission range, limited storage capacities, and limited computational capabilities. Moreover, the sensor nodes are deployed randomly and massively over an inaccessible or hostile region. Hence WSNs are vulnerable to adversaries and are usually operated in a dynamic and unreliable environment. Animal tracking using wireless sensors is one such application of WSN where power management plays a vital role. In this paper, an energy-efficient hybrid routing method is proposed that divides the …
Wireless Sensors Networks (WSNs) have a big application in heterogeneous networks. In this paper, we propose and evaluate Advanced Low-Energy Adaptive Clustering Hierarchy (Ad-LEACH) which is static clustering based heterogeneous routing protocol. The complete network field is first divided into static clusters and then in each cluster separate Ad-LEACH protocol is applied. Our proposed protocol is inherited from LEACH with a cluster head selection criteria of Distributed Energy-Efficient Clustering (DEEC). This enables Ad-LEACH to cope with the heterogeneous nature of nodes. Due to small stat…
This paper presents comparison of different hierarchical (position and non-position based) protocols with respect to different mobility models. Previous work mainly focuses on static networks or at most a single mobility model. Using only one mobility model may not predict the behavior of routing protocol accurately. Simulation results show that mobility has large impact on the behavior of WSN routing protocols. Also, position based routing protocols performs better in terms of packet delivery compared to non position based routing protocols.
In this paper, we propose Regional Energy Efficient Cluster Heads based on Maximum Energy (REECH-ME) Routing Protocol for Wireless Sensor Networks (WSNs) . The main purpose of this protocol is to improve the network lifetime and particularly the stability period of the network. In REECH-ME, the node with the maximum energy in a region becomes Cluster Head (CH) of that region for that particular round and the number of the cluster heads in each round remains the same. Our technique outperforms LEACH which uses probabilistic approach for the selection of CHs. We also implement the Uniform Random…
Wireless sensor nodes along with Base Station (BS) constitute a Wireless Sensor Network (WSN). Nodes comprise of tiny power battery. Nodes sense the data and send it to BS. WSNs need protocol for efficient energy consumption of the network. In direct transmission and minimum transmission energy routing protocols, energy consumption is not well distributed. However, LEACH (Low-Energy Adaptive Clustering Hierarchy) is a clustering protocol; randomly selects the Cluster Heads (CHs) in each round. However, random selection of CHs does not guarantee efficient energy consumption of the network. Ther…
The sensor nodes in a Wireless Sensor Network are generally constrained with limited power supply. Efficient power management is a must for any sensor network to keep the sensor nodes in the network to be operational for a longer period of time this increasing the lifetime of the sensor network. Hierarchy based routing enables the sensor networks to be deployed in larger areas. In this paper we present a hierarchical cluster based routing protocol which improves the scalability as the data travels from one cluster level to another covering a greater amount of distance and increases the lifetim…
In Wireless sensor networks, sensor nodes sense the data from environment according to its functionality and forwards to its base station. This process is called Data collection. The Data collection process is done either directly or by multi-hop routing. In direct routing, every sensor node directly transfers its sensed data to base station which has an impact on energy consumption from sensor node due to the far distance between the sensor node and base station. In multi-hop routing, the sensed data is relayed through multiple nodes to the base station, it consumes less energy. This paper pr…
A Wireless Sensor Network (WSN) is a collection of tiny nodes that have low energy levels and have become an essential component of the modern communication infrastructure and very important in industry and academia. Energy is crucial in WSN, and thus the design of WSN in the research community is based on energy efficiency, and node energy consumption is a great challenge to enhance WSN's lifetime. It may be costly or even impossible to charge or replace consumed batteries because of the difficult environment. Many energy efficiency methods are introduced in this article to decrease energy co…
In the years, routing protocols in wireless sensor networks (WSN) have been substantially investigated by researches. Most state-of-the-art surveys have focused on reviewing of wireless sensor network .In this paper we review the existing secure geographic routing protocols for wireless sensor network (WSN) and also provide a qualitative comparison of them.
The opportunistic routing has advantages on improving the packet delivery ratio between source node and candidate set (PDRsc). However, considering the frequent topology variation in wireless sensor networks, how to improve and control the PDR has not been investigated in detail. Therefore, in this paper, we propose an efficient and reliable topology control based opportunistic routing algorithm (ERTO) which takes PDRsc into account. In ERTO, the interference and transmission power loss are taken into account during the calculation of PDRsc. The PDRsc, the expected energy consumption, and the …
In this research work, we advise gateway based energy-efficient routing protocol (M-GEAR) for Wireless Sensor Networks (WSNs). We divide the sensor nodes into four logical regions on the basis of their location in the sensing field. We install Base Station (BS) out of the sensing area and a gateway node at the centre of the sensing area. If the distance of a sensor node from BS or gateway is less than predefined distance threshold, the node uses direct communication. We divide the rest of nodes into two equal regions whose distance is beyond the threshold distance. We select cluster heads (CHs…
More and more critical Wireless Sensor Networks (WSNs) applications are emerging. Those applications need reliability and respect of time constraints. The underlying mechanisms such as MAC and routing must handle such requirements. Our approach to the time constraint problem is to bound the hop-count between a node and the sink and the time it takes to do a hop so the end-to-end delay can be bounded and the communications are thus real-time. For reliability purpose we propose to select forwarder nodes depending on how they are connected in the direction of the sink. In order to be able to do s…
Data acquisition from a multi-hop large-scale outdoor wireless sensor network (WSN) deployment for environmental monitoring is full of challenges. This is because the severe resource constraints on small battery-operated motes (e.g., bandwidth, memory, power, and computing capacity), the big data acquisition volume from the large-scale WSN,and the highly dynamic wireless link conditions in an outdoor communication environment. We present a novel compressed sensing approach which can recover the sensing data at the sink with high fidelity when very few data packets are collected, leading to a s…
Source location privacy (SLP) protection is an emerging research topic in wireless sensor networks (WSNs). Because the source location represents the valuable information of the target being monitored and tracked, it is of great practical significance to achieve a high degree of privacy of the source location. Although many studies based on phantom nodes have alleviates the protection of source location privacy to some extent. It is urgent to solve the problems such as complicate the ac path between nodes, improve the centralized distribution of Phantom nodes near the source nodes and reduce t…
Wireless Sensor Networks (WSNs) emerge as underlying infrastructures for new classes of large scale net- worked embedded systems. However, WSNs system designers must fulfill the Quality-of-Service (QoS) requirements imposed by the applications (and users). Very harsh and dynamic physical environments and extremely limited energy/computing/memory/communication node resources are major obstacles for satisfying QoS metrics such as reliability, timeliness and system lifetime. The limited communication range of WSN nodes, link asymmetry and the characteristics of the physical environment lead to a …
Wireless Sensor Networks (WSNs) are highly distributed networks consisting of a large number of tiny, low-cost, light-weight wireless nodes deployed to monitor an environment or a system. Each node in a WSN consists of three subsystems: the sensor subsystem which senses the environment, the processing subsystem which performs local computations on the sensed data, and the communication subsystem which is responsible for message exchange with neighboring sensor nodes. While an individual sensor node has limited sensing region, processing power, and energy, networking a large number of sensor no…
Wireless distributed sensor network consists of randomly deployed sensors having low energy assets. These networks can be used for monitoring a variety of environments. Major problems of these networks are energy constraints and their finite lifetimes. To overcome these problems different routing protocols and clustering techniques are introduced. We propose DREEM-ME which uses a unique technique for clustering to overcome these two problems efficiently. DREEM-ME elects a fix number of cluster heads (CHs) in each round instead of probabilistic selection of CHs. Packet Drop Technique is also im…
In this paper, we study the downward routing for network control/actuation in large-scale and heterogeneous wireless sensor networks (WSNs) and Internet of Things (IoT). We propose the Opportunistic Source Routing (OSR), a scalable and reliable downward routing protocol for WSNs/IoT. OSR introduces opportunistic routing into traditional source routing based on the parent set of a node's upward routing in data collection, significantly addressing the drastic link dynamics in low-power and lossy WSNs. We devise a novel adaptive Bloom filter mechanism to effectively and efficiently encode a downw…
Routing packets opportunistically is an essential part of multihop ad hoc wireless sensor networks. The existing routing techniques are not adaptive opportunistic. In this paper we have proposed an adaptive opportunistic routing scheme that routes packets opportunistically in order to ensure that packet loss is avoided. Learning and routing are combined in the framework that explores the optimal routing possibilities. In this paper we implemented this Reinforced learning framework using a customer simulator. The experimental results revealed that the scheme is able to exploit the opportunistic…
Sink mobility is seen as a successful strategy to resolve the hotspot problem in Wireless Sensor Network (WSN). Mobile sinks roam in the network and collect data from special nodes such as Cluster Heads (CH) by means of short-range communications which improves the energy efficiency. Numerous mobile sink based routing protocols have been proposed, however, they incur high delays especially in large scale networks where the mobile sink has to travel for a long distance to collect data from CHs and consequently they failed to ensure a tradeoff between energy efficiency and delay. To resolve this…
There are many challenges when designing and deploying wireless sensor networks (WSNs). One of the key challenges is how to make full use of the limited energy to prolong the lifetime of the network, because energy is a valuable resource in WSNs. The status of energy consumption should be continuously monitored after network deployment. In this paper, we propose coverage and connectivity aware neural network based energy efficient routing in WSN with the objective of maximizing the network lifetime. In the proposed scheme, the problem is formulated as linear programming (LP) with coverage and …
Wireless Sensor Networks (WSNs) are rapidly emerging as an important new area in wireless and mobile computing research. Applications of WSNs are numerous and growing, and range from indoor deployment scenarios in the home and office to outdoor deployment scenarios in adversary's territory in a tactical battleground (Akyildiz et al., 2002). For military environment, dispersal of WSNs into an adversary's territory enables the detection and tracking of enemy soldiers and vehicles. For home/office environments, indoor sensor networks offer the ability to monitor the health of the elderly and to d…
Advances in wireless sensor network (WSN) technology have provided the availability of small and low-cost sensor with capability of sensing various types of physical and environmental conditions, data processing, and wireless communication. In WSN, the sensor nodes have a limited transmission range, and their processing and storage capabilities as well as their energy resources are also limited. Modified triple umpiring system (MTUS) has already proved its better performance in Wireless Sensor Networks. In this paper, we extended the MTUS by incorporating optimal signal to noise ratio (SNR)-ba…
Wireless sensor networks are harshly restricted by storage capacity, energy and computing power. So it is essential to design effective and energy aware protocol in order to enhance the network lifetime. In this paper, a review on routing protocol in WSNs is carried out which are classified as data-centric, hierarchical and location based depending on the network structure. Then some of the multipath routing protocols which are widely used in WSNs to improve network performance are also discussed. Advantages and disadvantages of each routing algorithm are discussed thereafter. Furthermore, thi…
Multipath routing in WSN has been a long wish in security scenario where nodes on next-hop may be targeted to compromise. Many proposals of Multipath routing has been proposed in ADHOC Networks but under constrained from keying environment most seems ignorant. In WSN where crucial data is reported by nodes in deployment area to their securely located Sink, route security has to be guaranteed. Under dynamic load and selective attacks, availability of multiple secure paths is a boon and increases the attacker efforts by many folds. We propose to build a subset of neighbors as our front towards d…
An energy efficient routing protocol is the major concern in Wireless Sensor Networks (WSNs). In this survey paper, we present energy efficient hierarchical routing protocols, developed from conventional LEACH routing protocol. Main focus of our study is how these extended protocols work in order to increase the life time and how quality routing protocol are improved for WSNs. Furthermore, this paper also highlights some of the issues faced by LEACH and also explains how these issues are tackled by extended versions of LEACH. We compare the features and performance issues of the selected hiera…
The advent and development in the field of Wireless Sensor Networks (WSNs) in recent years has seen the growth of extremely small and low-cost sensors that possess sensing, signal processing and wireless communication capabilities. These sensors can be expended at a much lower cost and are capable of detecting conditions such as temperature, sound, security or any other system. A good protocol design should be able to scale well both in energy heterogeneous and homogeneous environment, meet the demands of different application scenarios and guarantee reliability. On this basis, we have compare…
From energy conservation perspective inWireless Sensor Networks (WSNs), clustering of sensor nodes is a challenging task. Clustering technique in routing protocols play a key role to prolong the stability period and lifetime of the network. In this paper, we propose and evaluate a new routing protocol for WSNs. Our protocol; Divide-and-Rule (DR) is based upon static clustering and dynamic Cluster Head (CH) selection technique. This technique selects fixed number of CHs in each round instead of probabilistic selection of CH. Simulation results show that DR protocol outperform its counterpart ro…
Cluster based routing technique is most popular routing technique in Wireless Sensor Networks (WSNs). Due to varying need of WSN applications efficient energy utilization in routing protocols is still a potential area of research. In this research work we introduced a new energy efficient cluster based routing technique. In this technique we tried to overcome the problem of coverage hole and energy hole. In our technique we controlled these problems by introducing density controlled uniform distribution of nodes and fixing optimum number of Cluster Heads (CHs) in each round. Finally we verifie…
Wireless Sensor Networks (WSNs), with growing applications in the environment which are not within human reach have been addressed tremendously in the recent past. For optimized working of network many routing algorithms have been proposed, mainly focusing energy efficiency, network lifetime, clustering processes. Considering homogeneity of network, we proposed Energy Efficient Sleep Awake Aware (EESAA) intelligent routing protocol for WSNs. In our proposed technique we evaluate and enhance certain issues like network stability, network lifetime and cluster head selection process. Utilizing th…
Routing in Wireless Sensor Network (WSN) aims to interconnect sensor nodes via single or multi-hop paths. The routes are established to forward data packets from sensor nodes to the sink. Establishing a single path to report each data packet results in increasing energy consumption in WSN, hence, data aggregation routing is used to combine data packets and consequently reduce the number of transmissions. This reduces the routing overhead by eliminating redundant and meaningless data. There are two models for data aggregation routing in WSN: mobile agent and client/server. This paper describes …
Wireless Sensor Networks (WSNs) generate massive amount of live data and events sensed through dispersedly deployed tiny sensors. This generated data needed to be disseminate to the sink with slight consumption of network resources. One of the ways to efficiently transmit this bulk data is gossiping. An important consideration in gossip-based dissemination protocols is to keep routing table up to date. Considering the inherent resource constrained nature of adhoc wireless sensor networks, we propose a gossip based protocol that consumes little resources. Our proposed scheme aims to keep the ro…
This paper proposes a Traffic-Differentiated Two-Hop Routing protocol for Quality of Service (QoS) in Wireless Sensor Networks (WSNs). It targets WSN applications having different types of data traffic with several priorities. The protocol achieves to increase Packet Reception Ratio (PRR) and reduce end-to-end delay while considering multi-queue priority policy, two-hop neighborhood information, link reliability and power efficiency. The protocol is modular and utilizes effective methods for estimating the link metrics. Numerical results show that the proposed protocol is a feasible solution t…
The nodes in wireless sensor networks (WSNs) contain limited energy resources, which are needed to transmit data to base station (BS). Routing protocols are designed to reduce the energy consumption. Clustering algorithms are best in this aspect. Such clustering algorithms increase the stability and lifetime of the network. However, every routing protocol is not suitable for heterogeneous environments. AM-DisCNT is proposed and evaluated as a new energy efficient protocol for wireless sensor networks. AM-DisCNT uses circular deployment for even consumption of energy in entire wireless sensor n…
Wireless sensor networks (WSN) are characterized by a network of small, battery powered devices, operating remotely with no pre-existing infrastructure. The unique structure of WSN allow for novel approaches to data reduction and energy preservation. This paper presents a modification to the existing Q-routing protocol by providing an alternate action of performing sensor data reduction in place thereby reducing energy consumption, bandwidth usage, and message transmission time. The algorithm is further modified to include an energy factor which increases the cost of forwarding as energy reser…
Advances in Wireless Sensor Network Technology (WSN) have provided the availability of small and low-cost sensor with capability of sensing various types of physical and environmental conditions, data processing and wireless communication. In WSN, the sensor nodes have a limited transmission range, and their processing and storage capabilities as well as their energy resources are limited. Triple Umpiring System (TUS) has already been proved its better performance on Wireless Sensor Networks. Clustering technique provides an effective way to prolong the lifetime of WSN. In this paper, we modif…
This work focusses on analyzing the optimization strategies of routing protocols with respect to energy utilization of sensor nodes in Wireless Sensor Network (WSNs). Different routing mechanisms have been proposed to address energy optimization problem in sensor nodes. Clustering mechanism is one of the popular WSNs routing mechanisms. In this paper, we first address energy limitation constraints with respect to maximizing network life time using linear programming formulation technique. To check the efficiency of different clustering scheme against modeled constraints, we select four cluster…
The applications of Wireless Sensor Networks (WSN) contain a wide variety of scenarios. In most of them, the network is composed of a significant number of nodes deployed in an extensive area in which not all nodes are directly connected. Then, the data exchange is supported by multihop communications. Routing protocols are in charge of discovering and maintaining the routes in the network. However, the correctness of a particular routing protocol mainly depends on the capabilities of the nodes and on the application requirements. This paper presents a dynamic discover routing method for commu…
Wireless Sensor Networks (WSNs) are comprised of thousands of sensor nodes, with restricted energy, that co-operate to accomplish a sensing task. Various routing Protocols are designed for transmission in WSNs. In this paper, we proposed a hybrid routing protocol: Zonal-Stable Election Protocol (Z-SEP) for heterogeneous WSNs. In this protocol, some nodes transmit data directly to base station while some use clustering technique to send data to base station as in SEP. We implemented Z-SEP and compared it with traditional Low Energy adaptive clustering hierarchy (LEACH) and SEP. Simulation resul…
Protocols developed during the last years for Wireless Sensor Networks (WSNs) are mainly focused on energy efficiency and autonomous mechanisms (e.g. self-organization, self-configuration, etc). Nevertheless, with new WSN applications, appear new QoS requirements such as time constraints. Real-time applications require the packets to be delivered before a known time bound which depends on the application requirements. We particularly focus on applications which consist in alarms sent to the sink node. We propose Real-Time X-layer Protocol (RTXP), a real-time communication protocol. To the best…
Monitoring and automation of the critical infrastructures like the power grid is improvised by the support of an efficient and secure communication net-work. Due to the low cost, low power profile, dynamic nature, improved ac-curacy and scalability, wireless sensor networks (WSN) became an attractive choice for the Information and Communication Technology (ICT) system of the smart grid. However, the energy efficiency and security of WSN depends highly on the network design and routing scheme. In this paper, a WSN based Secure and Energy Efficient Remote Monitoring Technique (SERMT) is proposed…
Wireless Sensor Networks (WSNs) are increasing to handle complex situations and functions. In these networks some of the nodes become Cluster Heads (CHs) which are responsible to aggregate data of from cluster members and transmit it to Base Stations (BS). Those clustering techniques which are designed for homogenous network are not enough efficient for consuming energy. Stable Election Protocol (SEP) introduces heterogeneity in WSNs, consisting of two type of nodes. SEP is based on weighted election probabilities of each node to become CH according to remaining energy of nodes. We propose Het…
Wireless sensor networks are appearing as an emerging need for mankind. Though, Such networks are still in research phase however, they have high potential to be applied in almost every field of life. Lots of research is done and a lot more is awaiting to be standardized. In this work, cluster based routing in wireless sensor networks is studied precisely. Further, we modify one of the most prominent wireless sensor network's routing protocol "LEACH" as modified LEACH (MODLEACH) by introducing \emph{efficient cluster head replacement scheme} and \emph{dual transmitting power levels}. Our modif…
A Wireless Sensor Network (WSN) is made up of a large number of nodes that are spread randomly or on a regular basis to detect the surrounding environment and transfer data to a base station (BS) over the Internet to the user. It is widely used in a variety of civil and military concerns. Because the sensor has limited battery capacity, energy efficiency is a critical issue with WSNs. As a result, developing a routing protocol that decreases energy consumption in sensor nodes to extend the lifetime of the WSN using an intelligence algorithm has become difficult. LEACH is the first hierarchical…
This report deals with security in wireless sensor networks (WSNs), especially in network layer. Multiple secure routing protocols have been proposed in the literature. However, they often use the cryptography to secure routing functionalities. The cryptography alone is not enough to defend against multiple attacks due to the node compromise. Therefore, we need more algorithmic solutions. In this report, we focus on the behavior of routing protocols to determine which properties make them more resilient to attacks. Our aim is to find some answers to the following questions. Are there any exist…
We present our ``Zero Energy Network'' (ZEN) protocol stack for energy harvesting wireless sensor networks applications. The novelty in our work is $4$ fold: (1) Energy harvesting aware fully featured MAC layer. Carrier sensing, Backoff algorithms, ARQ, RTS/CTS mechanisms, Adaptive Duty Cycling are either auto configurable or available as tunable parameters to match the available energy (b) Energy harvesting aware Routing Protocol. The multi-hop network establishes routes to the base station using a modified version of AODVjr routing protocol assisted by energy predictions. (c) Application of …
The new advances of the Internet of Things (IoT) technology can be utilized to promote service delivery in several real-life applications such as healthcare systems. The Routing Protocol for Low Power and Loss Network (RPL) is a routing protocol designed to serve as a proper routing protocol for packets in Wireless Sensor Networks (WSN). Among the most prominent issues exist in the RPL protocol are packet loss within the WSN and sensors power consumption especially in healthcare WSNs. Multiple Objective Functions (OF) in RPL intended to find the routes from source nodes to a destination node. …
Energy is one of the most important and scarce resources in Wireless Sensor Networks (WSN). WSN nodes work with the embedded operating system called TinyOS, which addresses the constrains of the WSN nodes such as limited processing power, memory, energy, etc and it uses the collection Tree Protocol (CTP) to collect the data from the sensor nodes. It uses either the four-bit link estimation or Link Estimation Exchange Protocol (LEEP) to predict the bi directional quality of the wireless link between the nodes and the next hop candidate is based on the estimated link quality. The residual energy…
A Wireless Sensor Network(WSN) can be described as a collection of untethered sensor nodes. An important application of WSNs is in the field of real-time communication. Real-time communication is a critical service which requires a qualitative routing protocol for energy-efficient network communication. The judicious use of energy of the network nodes is essential and important for sustainability and longevity of a WSN. This paper proposes an algorithm namely Priority-Energy Based Data Forwarding Algorithm(PEDF) which empowers the node to choose the most suitable packet forwarding path, based …
A flooding attack in wireless sensor networks is a type of threat that shortens the lifetimes of the sensor networks. Although flooding attack prevention techniques have been proposed, if a continuous flooding attack occurs, the sensor node energy is depleted during detection. In this paper, we use multi-path routing to solve this problem. In order to balance the load of the sensor node, energy balancing of the sensor node is controlled by determining the number of pathways using fuzzy logic. By adjusting the energy balancing of the sensor nodes, the number of energy-exhausting sensor nodes ca…
Energy saving to prolong the network life is an important design issue while developing a new routing protocol for wireless sensor network. Clustering is a key technique for this and helps in maximizing the network lifetime and scalability. Most of the routing and data dissemination protocols of WSN assume a homogeneous network architecture, in which all sensors have the same capabilities in terms of battery power, communication, sensing, storage, and processing. Recently, there has been an interest in heterogeneous sensor networks, especially for real deployments. This research paper has prop…
Wireless Sensor Networks (WSNs) contain numerous sensor nodes having limited power resource, which report sensed data to the Base Station (BS) that requires high energy usage. Many routing protocols have been proposed in this regard achieving energy efficiency in heterogeneous scenarios. However, every protocol is not suitable for heterogeneous WSNs. Efficiency of protocol degrades while changing the heterogeneity parameters. In this paper, we first test Distributed Energy- Efficient Clustering (DEEC), Developed DEEC (DDEEC), Enhanced DEEC (EDEEC) and Threshold DEEC (TDEEC) under several diffe…
