Spin current generated by spin Hall effect in the heavy metal would diffuse up and down to adjacent ferromagnetic layers and exert torque on their magnetization, called spin-orbit torque. Antiferromagnetically coupled trilayers, namely the so-called synthetic antiferromagnets (SAF), are usually employed to serve as the pinned layer of spintronic devices based on spin valves and magnetic tunnel junctions to reduce the stray field and/or increase the pinning field. Here we investigate the spin-orbit torque in MgO/CoFeB/Ta/CoFeB/MgO perpendicularly magnetized multilayer with interlayer antiferromagnetic coupling. It is found that the magnetization of two CoFeB layers can be switched between two antiparallel states simultaneously. This observation is replicated by the theoretical calculations by solving Stoner-Wohlfarth model and Landau-Lifshitz-Gilbert equation. Our findings combine spin-orbit torque and interlayer coupling, which might advance the magnetic memories with low stray field and low power consumption.
We present results from an X-ray photoemission spectroscopy (XPS) study of CoFeB/MgO bi-layers where we observe process-dependent formation of B, Fe, and Co oxides at the CoFeB/MgO interface due to oxidation of CoFeB during MgO deposition. Vacuum annealing reduces the Co and Fe oxides but further incorporates B into the MgO forming a composite MgBxOy layer. Inserting an Mg layer between CoFeB and MgO introduces an oxygen sink, providing increased control over B content in the barrier.
We show by vector network analyzer ferromagnetic resonance measurements that low Gilbert damping α down to 0.006 can be achieved in perpendicularly magnetized MgO/CoFeB/MgO thin films with ultra-thin insertions of Ta in the CoFeB layer. While increasing the number of Ta insertions allows thicker CoFeB layers to remain perpendicular, the effective areal magnetic anisotropy does not improve with more insertions, and also comes with an increase in α.
Understanding the magnetic anisotropy at ferromagnetic metal/oxide interface is a fundamental and intriguing subject. Here we propose an approach to manipulate the strength of perpendicular magnetic anisotropy (PMA) by varying MgO thickness in the MgO/CoFeB/Ta thin films. We identify that the PMA at the MgO/CoFeB interface is tuned by the crystalline structure of bulk MgO layer and decreases dramatically due to the onset of crystalline MgO forming with the increase of MgO thickness. Our work opens an avenue to manipulate the magnetic anisotropy by the modification of the ferromagnetic metal/ox…
We report tunnel magnetoresistance (TMR) ratios as high as 472% at room temperature and 804% at 5 K in pseudo-spin valve (SV) CoFeB/MgO/CoFeB magnetic tunnel junctions (MTJs) annealed at 450oC, which is approaching the theoretically predicted value. By contrast, the TMR ratios for exchange-biased (EB) SV MTJs with a MnIr antiferromagnetic layer are found to drop when they are annealed at 450oC. Energy dispersive X-ray analysis shows that annealing at 450oC induces interdiffusion of Mn and Ru atoms into the MgO barrier and ferromagnetic layers in EB-SV MTJs. Mechanisms behind the different anne…
Thermal stability factor (delta) of recording layer was studied in perpendicular anisotropy CoFeB/MgO magnetic tunnel junctions (p-MTJs) with various CoFeB recording layer thicknesses and junction sizes. In all series of p-MTJs with different thicknesses, delta is virtually independent of the junction sizes of 48-81 nm in diameter. The values of delta increase linearly with increasing the recording layer thickness. The slope of the linear fit is explained well by a model based on nucleation type magnetization reversal.
We observe magnetic domain structures of MgO/CoFeB with a perpendicular magnetic easy axis under an electric field. The domain structure shows a maze pattern with electric-field dependent isotropic period. We find that the electric-field modulation of the period is explained by considering the electric-field modulation of the exchange stiffness constant in addition to the known magnetic anisotropy modulation.
To get stable perpendicularly magnetized tunnel junctions at small device dimensions, composite free layers that comprise two MgO/FeCoB interfaces as sources of interface anisotropy are generally used. Proper cristallisation and annealing robustness is typically ensured by the insertion of a spacer layer of the early transition metal series within the FeCoB layer. We study the influence of the spacer thickness and growth condition on the switching metrics of tunnel junctions thermally annealed at 400$^\circ$C for the case of 1-4 Å Ta spacers. Thick Ta spacer results in a large anisotropies ind…
We report the intrinsic critical current density (Jc0) in current-induced magnetization switching and the thermal stability factor (E/kBT, where E, kB, and T are the energy potential, the Boltzmann constant, and temperature, respectively) in MgO based magnetic tunnel junctions with a Co40Fe40B20(2nm)/Ru(0.7-2.4nm)/Co40Fe40B20(2nm) synthetic ferrimagnetic (SyF) free layer. We show that Jc0 and E/kBT can be determined by analyzing the average critical current density as a function of coercivity using the Slonczewski's model taking into account thermal fluctuation. We find that high antiferromagn…
Current-driven magnetization switching in low-resistance Co40Fe40B20/MgO/Co40Fe40B20 magnetic tunnel junctions (MTJs) is reported. The critical-current densities Jc required for current-driven switching in samples annealed at 270C and 300C are found to be as low as 7.8 x 10^5 A/cm^2 and 8.8 x 10^5 A/cm^2 with accompanying tunnel magnetoresistance (TMR) ratios of 49% and 73 %, respectively. Further annealing of the samples at 350C increases TMR ratio to 160 %, while accompanying Jc increases to 2.5 x 10^6 A/cm^2. We attribute the low Jc to the high spin-polarization of tunnel current and small …
We investigated the dependence of giant tunnel magnetoresistance (TMR) on the thickness of an MgO barrier and on the annealing temperature of sputtered CoFeB/MgO/CoFeB magnetic tunnel junctions deposited on SiO2/Si wafers. The resistance-area product exponentially increases with MgO thickness, indicating that the quality of MgO barriers is high in the investigated thickness range of 1.15-2.4 nm. High-resolution transmission electron microscope images show that annealing at 375 C results in the formation of crystalline CoFeB/MgO/CoFeB structures, even though CoFeB electrodes are amorphous in th…
We study the perpendicular magnetic anisotropy (PMA) of the CoFeB/MgO bilayers in contact with W, Ta, IrMn and Ti which has been suggested as the spin-orbit-torque-related underlayers. The saturation magnetization of the CoFeB depends on the underlayer materials due to formation of a dead-layer, affecting PMA strength of each film. The x-ray magnetic circular dichroism measurement reveals that the interfacial intermixing suppresses only the perpendicular orbital moment of Fe, while the intermixing simultaneously suppresses both the perpendicular and in-plane orbital moments of Co.
Magnetic tunnel junctions with crystalline MgO tunnel barrier and amorphous CoFeB electrodes received much attention due to their high tunnel magneto resistance ratio at room temperature. One important parameter for achieving high tunnel magneto resistance ratios is to control the boron diffusion from the electrodes especially during post growth annealing. By high resolution transmission electron microscopy and electron energy loss spectroscopy techniques we show that the cap layer material adjacent to the electrodes and the MgO deposition method are crucial to control boron redistribution. It…
We present a comparison of the tunnel magneto-Seebeck effect for laser induced and intrinsic heating. Therefore, Co$_{40}$Fe$_{40}$B$_{20}$/MgAl$_2$O$_4$ and Co$_{25}$Fe$_{55}$B$_{20}$/MgO magnetic tunnel junctions have been prepared. The TMS ratio of 3\,\% in case of the MAO MTJ agrees well with ratios found for other barrier materials, while the TMS ratio of 23\,\% of the MgO MTJ emphasizes the influence of the CoFe composition. We find results using the intrinsic method that differ in sign and magnitude in comparison to the results of the laser heating. The intrinsic contributions can alter…
We report measurements of the in-plane magnetoelastic coupling in ultra-thin Ta|CoFeB|MgO layers as a function of uniaxial strain, conducted using a four-point bending apparatus. For annealed samples, we observe a strong dependence on the thickness of the CoFeB layer in the range 1.3-2.0 nm, which can be modeled as arising from a combination of effective surface and volume contributions to the magnetoelastic coupling. We point out that if similar thickness dependence exists for magnetoelastic coupling in response to biaxial strain, then the standard Néel model for the magnetic anisotropy energ…
We investigate the exchange stiffness constants of 28-nm-thick CoFeB film using Brillouin light scattering. Series of CoFeB films are prepared on the MgO(001) substrate with or without additional 5-nm thick MgO buffer layer, the effect of the annealing temperature on the exchange stiffness constants are studied. We found that the exchange stiffness constant of 400oC annealed sample with MgO buffer increased by 10 % form the 200oC annealed sample (=0.73 +/- 0.01 x 10-11 J/m), while the exchange stiffness constant of without MgO buffer layer sample increase by 6 % from the as-grown sample (=1.11…
Perpendicularly magnetized spin injector with high Curie temperature is a prerequisite for developing spin optoelectronic devices on 2D materials working at room temperature (RT) with zero applied magnetic field. Here, we report the growth of Ta/CoFeB/MgO structures with a large perpendicular magnetic anisotropy (PMA) on full coverage monolayer (ML) MoS2. A large perpendicular interface anisotropy energy of 0.975mJ/m2 has been obtained at the CoFeB/MgO interface, comparable to that observed in magnetic tunnel junction systems. It is found that the insertion of MgO between the ferromagnetic met…
Voltage control of magnetism and spintronics have been highly desirable, but rarely realized. In this work, we show voltage-controlled spin-orbit torque (SOT) switching in W/CoFeB/MgO films with perpendicular magnetic anisotropy (PMA) with voltage administered through SrTiO3 with a high dielectric constant. We show that a DC voltage can significantly lower PMA by 45%, reduce switching current by 23%, and increase the damping-like torque as revealed by the first and second-harmonic measurements. These are characteristics that are prerequisites for voltage-controlled and voltage-select SOT switc…
We show that the magnetic characteristics of Ta|CoFeB|MgO magnetic heterostructures are strongly influenced by doping the Ta underlayer with nitrogen. In particular, the saturation magnetization drops upon doping the Ta underlayer, suggesting that the doped underlayer acts as a boron diffusion barrier. In addition, the thickness of the magnetic dead layer decreases with increasing nitrogen doping. Surprisingly, the interface magnetic anisotropy increases to ~1.8 erg/cm2 when an optimum amount of nitrogen is introduced into the Ta underlayer. These results show that nitrogen doped Ta serves as …
We investigated the temperature dependence of the switching current for a perpendicularly magnetized CoFeB film deposited on a nanocrystalline tungsten film with large oxygen content: nc-W(O). The spin Hall angle $|Θ_\mathrm{SH}| \approx 0.22$ is independent of temperature, whereas the switching current increases strongly at low temperature. We show that the nc-W(O) is insensitive to annealing. It thus can be a good choice for the integration of spin Hall driven writing of information in magnetic memory or logic devices that require a high-temperature annealing process during fabrication.
We demonstrate a large electrical spin injection into GaAs at zero magnetic field thanks to an ultrathin perpendicularly magnetized CoFeB contact of a few atomic planes (1.2 nm). The spin-polarization of electrons injected into GaAs was examined by the circular polarization of electroluminescence from a Spin Light Emitting Diode with embedded InGaAs/GaAs quantum wells. The electroluminescence polarization as a function of the magnetic field closely traces the out-of-plane magnetization of the CoFeB/MgO injector. A circular polarization degree of the emitted light as large as 20% at 25 K is ach…
We study effects originating from the strong spin orbit coupling in CoFeB/MgO heterostructures with heavy metal (HM) underlayers. The perpendicular magnetic anisotropy at the CoFeB/MgO interface, the spin Hall angle of the heavy metal layer, current induced torques and the Dzyaloshinskii-Moriya interaction at the HM/CoFeB interfaces are studied for films in which the early 5d transition metals are used as the HM underlayer. We show how the choice of the HM layer influences these intricate spin orbit effects that emerge within the bulk and at interfaces of the heterostructures.
We study the tunneling magneto thermopower and tunneling magneto thermocurrent of CoFeB/MgO/CoFeB magnetic tunnel junctions (MTJ). The devices show a clear change of the thermoelectric properties upon reversal of the magnetisation of the CoFeB layers from parallel to the antiparallel orientation. When switching from parallel to antiparallel the thermopower increases by up to 55% where as the thermocurrent drops by 45%. These observations can be well explained by the Onsager relations taking into account the tunneling magneto resistance of the MTJ. These findings contrast previous studies on Al…
We investigated the relationship between tunnel magnetoresistance (TMR) ratio and the crystallization of CoFeB layers through annealing in magnetic tunnel junctions (MTJs) with MgO barriers that had CoFe/Ru/CoFeB synthetic ferrimagnet pinned layers with varying Ru spacer thickness (tRu). The TMR ratio increased with increasing annealing temperature (Ta) and tRu, reaching 361% at Ta = 425C, whereas the TMR ratio of the MTJs with pinned layers without Ru spacers decreased at Ta over 325C. Ruthenium spacers play an important role in forming an (001)-oriented bcc CoFeB pinned layer, resulting in a…
We investigate the spin-dependent Seebeck coefficient and the tunneling magneto thermopower of CoFeB/MgO/CoFeB magnetic tunnel junctions (MTJ) in the presence of thermal gradients across the MTJ. Thermal gradients are generated by an electric heater on top of the nanopillars. The thermo power voltage across the MTJ is found to scale linearly with the heating power and reveals similar field dependence as the tunnel magnetoresistance. The amplitude of the thermal gradient is derived from calibration measurements in combination with finite element simulations of the heat flux. Based on this, larg…
Spin-orbit torque facilitates efficient magnetization switching via an in-plane current in perpendicularly magnetized heavy metal/ferromagnet heterostructures. The efficiency of spin-orbit-torque-induced switching is determined by the charge-to-spin conversion arising from either bulk or interfacial spin-orbit interactions, or both. Here, we demonstrate that the spin-orbit torque and the resultant switching efficiency in Pt/CoFeB systems are significantly enhanced by an interfacial modification involving Ti insertion between the Pt and CoFeB layers. Spin pumping and X-ray magnetic circular dic…
Power consumption is the main limitation in the development of new high performance random access memory for portable electronic devices. Magnetic RAM (MRAM) with CoFeB/MgO based magnetic tunnel junctions (MTJs) is a promising candidate for reducing the power consumption given its non-volatile nature while achieveing high performance. The dynamic properties and switching mechanisms of MTJs are critical to understanding device operation and to enable scaling of devices below 30 nm in diameter. Here we show that the magnetic reversal mechanism is incoherent and that the switching is thermally nu…
By submonolayer insertion of Au, Pt, or Pd into Ta / CoFeB / MgO / Ta heterostructures we tune the perpendicular magnetic anisotropy and the coercive field of the ferromagnetic layer. We demonstrate that this has a major influence on the spin Hall switching current density and its dependence on the external magnetic field. Despite a rather small effective spin Hall angle of $θ_\mathrm{SH} \approx -0.07$, we obtain switching current densities as low as $2 \times 10^{10}$ A/m$^2$ with a 2 Å Au interlayer. We find that the Dzyaloshinskii-Moriya interaction parameter $D$ is reduced with Au or Pd i…
We investigated dependence of tunnel magnetoresistance effect in CoFeB/MgO/CoFeB magnetic tunnel junctions on Ar pressure during MgO-barrier sputtering. Sputter deposition of MgO-barrier at high Ar pressure of 10 mTorr resulted in smooth surface and highly (001) oriented MgO. Using this MgO as a tunnel barrier, tunnel magnetoresistance (TMR) ratio as high as 355% at room temperature (578% at 5K) was realized after annealing at 325 C or higher, which appears to be related to a highly (001) oriented CoFeB texture promoted by the smooth and highly oriented MgO. Electron-beam lithography defined d…
An efficient electrical spin injection into an InGaAs/GaAs quantum well light emitting diode is demonstrated thanks to a CoFeB/MgO spin injector. The textured MgO tunnel barrier is fabricated by two different techniques: sputtering and molecular beam epitaxy (MBE). The maximal spin injection efficiency is comparable for both methods. Additionally, the effect of annealing is also investigated for the two types of samples. Both samples show the same trend: an increase of the electroluminescence circular polarization (Pc) with the increase of annealing temperature, followed by a saturation of Pc …
We investigate the influence of the barrier thickness of Co$_{40}$Fe$_{40}$B$_{20}$ based magnetic tunnel junctions on the laser-induced tunnel magneto-Seebeck effect. Varying the barrier thickness from 1nm to 3nm, we find a distinct maximum in the tunnel magneto-Seebeck effect for 2.6nm barrier thickness. This maximum is independently measured for two barrier materials, namely MgAl$_2$O$_4$ and MgO. Additionally, samples with an MgAl$_2$O$_4$ barrier exhibit a high thermovoltage of more than 350$μ$V in comparison to 90$μ$V for the MTJs with MgO barrier when heated with the maximum laser power…
Ta/CoFeB/MgO trilayers with perpendicular magnetic anisotropy are often characterised by vanishing or modest values of interfacial Dzyaloshinskii-Moriya interaction (DMI), which results in purely Bloch or mixed Bloch-Néel domain walls (DWs). Here we investigate the creep evolution of the overall magnetic bubble morphology in these systems under the combined presence of in-plane and out-of-plane magnetic fields and we show that He$^+$ ion irradiation induces a transition of the internal DW structure towards a fully Néel spin texture. This transition can be correlated to a simultaneous increase …
We report that strong perpendicular magnetic anisotropy of the ferromagnetic layer in a W/CoFeB/MgO multilayer structure can be established by inserting a Hf layer as thin as 0.25 nm between the W and CoFeB layers. The Hf spacer also allows transmission of spin currents generated by an in-plane charge current in the W layer to apply strong spin torque on the CoFeB, thereby enabling current-driven magnetic switching. The antidamping-like and field-like components of the spin torque exerted on a 1 nm CoFeB layer are of comparable magnitudes in this geometry. Both components originate from the sp…
Interfacial Dzyaloshinskii-Moriya interaction (iDMI) in interlayer exchange coupled (IEC) Pt/Co$_{20}$Fe$_{60}$B$_{20}$(1.12 nm)/Ru/Co$_{20}$Fe$_{60}$B$_{20}$(1.12 nm) systems have been studied theoretically and experimentally. Vibrating sample magnetometer has been used to measure their magnetization at saturation and their interlayer exchange coupling constants. These latter are found to be of an antiferromagnetic nature for the investigated Ru range thickness (0.5-1 nm). Their dynamic magnetic properties were studied using Brillouin light scattering (BLS) technique. The BLS measurements rev…
The flow of in-plane current through ultrathin magnetic heterostructures can cause magnetization switching or domain wall nucleation owing to bulk and interfacial effects. Within the magnetic layer, the current can create magnetic instabilities via spin transfer torques (STT). At interface(s), spin current generated from the spin Hall effect in a neighboring layer can exert torques, referred to as the spin Hall torques, on the magnetic moments. Here, we study current induced magnetization switching in perpendicularly magnetized CoFeB/MgO heterostructures with a heavy metal (HM) underlayer. Dep…
The exchange bias effect is commonly used to shift the coercive field of a ferromagnet. This technique is crucial for the use of magnetic tunnel junctions as logic or memory devices. Therefore, an independent switching of the two ferromagnetic electrodes is necessary to guarantee a reliable readout. Here, we demonstrate that the intrinsic exchange bias effect of Ni-Mn-Sn can be used to apply a unidirectional anisotropy to magnetic tunnel junctions. For this, we use epitaxial Ni-Mn-Sn films as pinning layers for microfabricated CoFeB/MgO/CoFeB magnetic tunnel junctions. We compare the exchange …
We investigated the effect of using a synthetic ferrimagnetic (SyF) free layer in MgO-based magnetic tunnel junctions (MTJs) on current-induced magnetization switching (CIMS), particularly for application to spin-transfer torque random access memory (SPRAM). The employed SyF free layer had a Co40Fe40B20/ Ru/ Co40Fe40B20 and Co20Fe60B20/Ru/Co20Fe60B20 structures, and the MTJs(100x(150-300) nm^2) were annealed at 300oC. The use of SyF free layer resulted in low intrinsic critical current density (Jc0) without degrading the thermal-stability factor (E/kBT, where E, kB, and T are the energy potent…
We study thin films and magnetic tunnel junction nanopillars based on Ta/Co$_{20}$Fe$_{60}$B$_{20}$/MgO multilayers by electrical transport and magnetometry measurements. These measurements suggest that an ultrathin magnetic oxide layer forms at the Co$_{20}$Fe$_{60}$B$_{20}$/MgO interface. At approximately 160 K, the oxide undergoes a phase transition from an insulating antiferromagnet at low temperatures to a conductive weak ferromagnet at high temperatures. This interfacial magnetic oxide is expected to have significant impact on the magnetic properties of CoFeB-based multilayers used in sp…
A study of the multilayer system MgO/CoFeB(1.1nm)/Ta($t$)/CoFeB(0.8nm)/MgO is presented, where the two CoFeB layers are separated by a Ta interlayer of varying thickness $t$. The magnetization properties deduced from complementary techniques such as superconducting quantum interference magnetometry, ferromagnetic resonance frequency measurements and Brillouin light scattering spectroscopy can be tuned by changing the Ta thickness between $t$=0.25 nm, 0.5 nm and 0.75 nm. For $t$=0.5 nm, a ferromagnetic coupling is observed, whereas for t=0.75 nm, the antiferromagnetic coupling needed to constru…
Ta/CoFeB/MgO trilayers with perpendicular magnetic anisotropy are expected to play a key role in the next generation of current and electric field switched memory and logic devices. In this study we use Kerr microscopy alongside electrical transport measurement to gain insight into the underlying switching mechanisms of such devices. We find switching to be a stochastic, domain wall driven process, the speed of which is strongly dependent on the switching current. Kerr imaging shows domain nucleation at the edge of the device which modelling reveals is likely assisted by the perpendicular comp…
Electric-field controlled magnetization dynamics is an important integrant in low power spintronic devices. In this letter, we demonstrate electric-field induced parametric excitation for CoFeB/MgO junctions by using interfacial in-plane magnetic anisotropy. When the in-plane magnetic anisotropy and the external magnetic field are parallel to each other, magnons are efficiently excited by using electric-field induced parametric excitation. Its wavelength and wavenumber are tuned by changing input power and frequency of the applied voltage. A generalized phenomenological model is developed to e…
Magnetoelectric coupling between magnetic and electric dipoles is one of the cornerstones of modern physics towards developing the most energy-efficient magnetic data storage. Conventionally, magnetoelectric coupling is achieved in single-phase multiferroics or in magnetoelectric composite nanostructures consisting of ferromagnetic and ferroelectric/piezoelectric materials. Here, we demonstrate an electric-field-induced strain-mediated magnetoelectric effect in ultrathin CoFeB/MgO magnetic tunnel junction employing non-piezoelectric material, which is a vitally important structure for spintron…
We study the ferromagnetic layer thickness dependence of the voltage-controlled magnetic anisotropy (VCMA) in gated CoFeB/MgO heterostructures with heavy metal underlayers. When the effective CoFeB thickness is below ~1 nm, the VCMA efficiency of Ta/CoFeB/MgO heterostructures considerably decreases with decreasing CoFeB thickness. We find that a high order phenomenological term used to describe the thickness dependence of the areal magnetic anisotropy energy can also account for the change in the areal VCMA efficiency. In this structure, the higher order term competes against the common interf…
The spin-orbit interaction in heavy metal/ferromagnet/oxide structures has been extensively investigated because it can be employed in manipulation of the magnetization direction by in-plane current. This implies the existence of an inverse effect, in which the conductivity in such structures should depend on the magnetization orientation. In this work, we report a systematic study of the magnetoresistance (MR) of the W/CoFeB/MgO structures and its correlation to the current-induced torque to the magnetization. We observe that the MR is independent of the angle between magnetization and curren…
Recent studies have shown that material structures, which lack structural inversion symmetry and have high spin-orbit coupling can exhibit chiral magnetic textures and skyrmions which could be a key component for next generation storage devices. The Dzyaloshinskii-Moriya Interaction (DMI) that stabilizes skyrmions is an anti-symmetric exchange interaction favoring non-collinear orientation of neighboring spins. It has been shown that material systems with high DMI can lead to very efficient domain wall and skyrmion motion by spin-orbit torques. To engineer such devices, it is important to quan…
Thin electrodes of magnetic tunnel junctions can show superparamagnetism at surprisingly low temperature. We analysed their thermally induced switching for varying temperature, magnetic and electric field. Although the dwell times follow an Arrhenius law, they are orders of magnitude too small compared to a model of single domain activation. Including entropic effects removes this inconsistency and leads to a magnetic activation volume much smaller than that of the electrode. Comparing data for varying barrier thickness then allows to separate the impact of Zeman energy, spin-transfer-torque a…
We report on a magnetic field sensor based on CoFeB/MgO/CoFeB magnetic tunnel junctions. By taking advantage of the perpendicular magnetic anisotropy of the CoFeB/MgO interface, the magnetization of the sensing layer is tilted out-of-plane which results in a linear response to in-plane magnetic fields. The application of a bias voltage across the MgO tunnel barrier of the field sensor affects the magnetic anisotropy and thereby its sensing properties. An increase of the maximum sensitivity and simultaneous decrease of the magnetic field operating range by a factor of two is measured. Based on …
The balance between low power consumption and high efficiency in memory devices is a major limiting factor in the development of new technologies. Magnetic random access memories (MRAM) based on CoFeB/MgO magnetic tunnel junctions (MTJs) have been proposed as candidates to replace the current technology due to their non-volatility, high thermal stability and efficient operational performance. Understanding the size and temperature dependence of the energy barrier and the nature of the transition mechanism across the barrier between stable configurations is a key issue in the development of MRA…
The role of current induced effective magnetic field in ultrathin magnetic heterostructures is increasingly gaining interest since it can provide efficient ways of manipulating magnetization electrically. Two effects, known as the Rashba spin orbit field and the spin Hall spin torque, have been reported to be responsible for the generation of the effective field. However, quantitative understanding of the effective field, including its direction with respect to the current flow, is lacking. Here we show vector measurements of the current induced effective field in Ta|CoFeB|MgO heterostructrure…
Current induced spin-orbit effective magnetic fields in metal/ferromagnet/oxide trilayers provide a new way to manipulate the magnetization, which is an alternative to the conventional current induced spin transfer torque arising from noncollinear magnetization. Ta/CoFeB/MgO structures are expected to be useful for non-volatile memories and logic devices due to its perpendicular anisotropy and large current induced spin-orbit effective fields. However many aspects such as the angular and temperature dependent phenomena of the effective fields are little understood. Here, we evaluate the angula…
We investigated the low temperature performance of CoFeB/MgO based perpendicular magnetic tunnel junctions (pMTJs) by characterizing their quasi-static switching voltage, high speed pulse write error rate and endurance down to 9 K. pMTJ devices exhibited high magnetoresistance (>120%) and reliable (error rate<10-4) bi-directional switching with 2 to 200 ns voltage pulses. The endurance of the devices at 9 K surpassed that at 300 K by three orders of magnitude under the same write conditions, functioning for more than 10^12 cycles with 10 ns write pulses. The critical switching voltage at 9 K w…
Recent advances in the understanding of spin orbital effects in ultrathin magnetic heterostructures have opened new paradigms to control magnetic moments electrically. The Dzyaloshinskii-Moriya interaction (DMI) is said to play a key role in forming a Neel-type domain wall that can be driven by the spin Hall torque, a torque resulting from the spin current generated in a neighboring non-magnetic layer via the spin Hall effect. Here we show that the sign of the DMI, which determines the direction to which a domain wall moves with current, can be changed by modifying the adjacent non-magnetic la…
The interlayer exchange coupling confers specific properties to Synthetic Antiferromagnets that make them suitable for several applications of spintronics. The efficient use of this magnetic configuration requires an in-depth understanding of the magnetic properties and their correlation with the material structure. Here we establish a reliable procedure to quantify the interlayer exchange coupling and the intralayer exchange stiffness in synthetic antiferromagnets; we apply it to the ultrasmooth and amorphous Co$_{40}$Fe$_{40}$B$_{20}$ (5-40 nm)/Ru/ Co$_{40}$Fe$_{40}$B$_{20}$ material platfor…
We have studied the underlayer thickness and temperature dependences of the current induced effective field in CoFeB|MgO heterostructures with Ta based underlayers. The underlayer thickness at which the effective field saturates is found to be different between the two orthogonal components of the effective field, i.e. the damping-like term tends to saturate at smaller underlayer thickness than the field-like term. For large underlayer thickness films in which the effective field saturates, we find that the temperature significantly influences the size of the effective field. A striking differ…
Recent advances in the understanding of spin orbital effects in ultrathin magnetic heterostructures have opened new paradigms to control magnetic moments electrically. The Dzyaloshinskii-Moriya interaction (DMI) is said to play a key role in forming a Neel-type domain wall that can be driven by the spin Hall torque, a torque resulting from the spin current generated in a neighboring non-magnetic layer via the spin Hall effect. Here we show that the strength and sign of the DMI can be changed by modifying the adjacent heavy metal underlayer (X) in perpendicularly magnetized X|CoFeB|MgO heterstr…
We report on systematic ab-initio investigations of Co and Cr interlayers embedded in Fe(001)/MgO/Fe(001) magnetic tunnel junctions, focusing on the changes of the electronic structure and the transport properties with interlayer thickness. The results of spin-dependent ballistic transport calculations reveal options to specifically manipulate the tunnel magnetoresistance ratio. The resistance area products and the tunnel magnetoresistance ratios show a monotonous trend with distinct oscillations as a function of the Cr thickness. These modulations are directly addressed and interpreted by mea…
Magnetic tunnel junction (MTJ) based on CoFeB/MgO/CoFeB structures is of great interest due to its application in the spin-transfer-torque magnetic random access memory (STT-MRAM). Large interfacial perpendicular magnetic anisotropy (PMA) is required to achieve high thermal stability. Here we use first-principles calculations to investigate the magnetic anisotropy energy (MAE) of MgO/CoFe/capping layer structures, where the capping materials include 5d metals Hf, Ta, Re, Os, Ir, Pt, Au and 6p metals Tl, Pb, Bi. We demonstrate that it is feasible to enhance PMA by using proper capping materials…
Disorder in ultra-thin magnetic films can significantly hinder domain wall motion. One of the main issues on the path towards efficient domain wall based devices remains the characterization of the pinning landscape at the nanoscale. In this paper, we study domain wall motion in W/CoFeB/MgO thin films with perpendicular magnetic anisotropy crystallized by annealing at 400$^{\circ}$C and a process based on He$^{+}$ irradiation combined with elevated temperatures. Magnetic properties are similar for the whole series of samples, while the magnetic domain wall mobility is critically improved in th…
We demonstrate a voltage-controlled exchange bias effect in CoFeB/MgO/CoFeB magnetic tunnel junctions that is related to the interfacial Fe(Co)Ox formed between the CoFeB electrodes and the MgO barrier. The unique combination of interfacial antiferromagnetism, giant tunneling magnetoresistance, and sharp switching of the perpendicularly-magnetized CoFeB allows sensitive detection of the exchange bias. It is found that the exchange bias field can be isothermally controlled by magnetic fields at low temperatures. More importantly, the exchange bias can also be effectively manipulated by the elec…
Magnetic heterostructure Mo/CoFeB/MgO has strong perpendicular magnetic anisotropy and thermal stability. Through current-induced hysteresis loop shift measurements, we show that the dampinglike spin-orbit torque (SOT) efficiency of Mo/CoFeB/MgO heterostructure is $ξ_{DL}\approx -0.003\pm 0.001$ and fairly independent of the annealing temperature from 300$^\circ$C to 400$^\circ$C. Though $|ξ_{DL}|$ is small while compare to those from Ta or W-based heterostructures, reversible current-induced SOT switching of a thermally-stable Mo/CoFeB/MgO heterostruture can still be achieved. Furthermore, we…
Domain structures in CoFeB-MgO thin films with a perpendicular easy magnetization axis were observed by magneto-optic Kerr-effect microscopy at various temperatures. The domain wall surface energy was obtained by analyzing the spatial period of the stripe domains and fitting established domain models to the period. In combination with SQUID measurements of magnetization and anisotropy energy, this leads to an estimate of the exchange stiffness and domain wall width in these films. These parameters are essential for determining whether domain walls will form in patterned structures and devices …
