CubeSats are emerging as low-cost tools to perform astronomy, exoplanet searches and earth observation. These satellites can target an object for science observation for weeks on end. This is typically not possible on larger missions where usage time is shared. The problem of designing an attitude control system for CubeSat telescopes is very challenging because current choice of actuators such as reaction-wheels and magnetorquers can induce jitter on the spacecraft due to moving mechanical parts and due to external disturbances. These telescopes may contain cryo-pumps and servos that introduce additional vibrations. A better solution is required. In our paper, we analyze the feasibility of utilizing solar radiation pressure (SRP) and radiometric force to achieve precise attitude control. Our studies show radiometric actuators to be a viable method to achieve precise pointing. The device uses 8 thin vanes of different temperatures placed in a near-vacuum chamber. These chambers contain trace quantities of lightweight, inert gasses like argon. The temperature gradient across the vanes causes the gas molecules to strike the vanes differently and thus inducing a force. By controlling these forces, it's possible to produce a torque to precisely point or spin a spacecraft. We present a conceptual design of a CubeSat that is equipped with these actuators. We then analyze the potential slew maneuver and slew rates possible with these actuators by simulating their performance. Our analytical and simulation results point towards a promising pathway for laboratory testing of this technology and demonstration of this technology in space.
MinXSS-1 CubeSat On-Orbit Pointing and Power Performance: The First Flight of the Blue Canyon Technologies XACT 3-axis Attitude Determination and Control System
微型X射线太阳光谱仪(MinXSS)是一个3单元(3U)立方体卫星,设计用于为期3个月的任务,研究太阳软X射线光谱辐照度。两个飞行模型中的第一个于2016年5月从国际空间站部署,并在自然离轨前运行了一年。这是Blue Canyon Technologies XACT 3轴姿态确定和控制系统的首次飞行,该系统是一种商用高精度指向系统。我们的特点是指向系统的性能在轨道上,包括在低海拔的阻力矩建立的性能。我们发现,在190 km - 410 km范围内,指向精度始终为0.0042 \degree \ - 0.0117 \degree \(15 $''$ - 42 $''$,3 $σ$,轴相关),略好于规格表所述。峰间抖动估计为0.0073 \degree \(10 s $^{-1}$)- 0.0183 \degree \(10 s $^{-1}$)(26 $''$(10 s $^{-1}$)- 66 $''$(10 s $^{-1}$),3 $σ$)。该系统能够在185公里的高度释放动量。我们发现少量的传感器退化的恒星跟踪器和粗糙的太阳传感器。我们的任务剖面不需要高敏捷性机动,所以我们无法描述这个指标。在没有全球定位系统接收器的情况下,必须定期上载星历信息,以更新轨道传播模型并保持指向。在400公里处,这些上传需要每隔一周进行一次。在$\sim$ 270公里的时候,他们每天都需要。我们还…
Model Evaluation of a Transformable CubeSat for Nonholonomic Attitude Reorientation Using a Drop Tower
Faculty of System Informatics, Kobe University(神户大学系统信息学系);Department of Mechanical Engineering, Aoyama Gakuin University(山梨大学机械工程系);Department of Applied Mechanics and Aerospace Engineering, Waseda University(早稻田大学应用力学与航空工程系)
Demonstrating high-precision photometry with a CubeSat: ASTERIA observations of 55 Cancri e
ASTERIA(Arcsecond Space Telescope Enhancing Research In Astrophysics)是一个6 U CubeSat空间望远镜(10 cm x 20 cm x 30 cm,10 kg)。ASTERIA的主要飞行任务目标是演示减少光度观测系统噪声的两项关键技术:高精度指向控制和高稳定性热控制。ASTERIA在其主要飞行任务期间展示了0.5角秒RMS指向稳定性和$\pm$ 10毫开尔文的相机有效载荷热控制,与ASTERIA大小和质量级别的其他航天器相比,在指向和热性能方面有了显著改进。ASTERIA于2017年8月发射,2017年11月从国际空间站(ISS)部署。在主要任务(2017年11月-2018年2月)和随后的第一次延长任务(2018年3月-2018年5月)期间,ASTERIA进行了机会主义科学观测,其中包括收集55 Cancri的光度数据,这是一个附近的系外行星系统,有一颗超级地球过境行星。55 Cancri数据使用自定义流水线减少,以校正CMOS检测器列相关增益变化。一个马尔可夫链蒙特卡罗(MCMC)方法被用来同时使用一个简单的基线模型和适合过境模型的光度下降趋势。ASTERIA对已知的凌日系外行星55 Cancri e($\sim2$ ~ \Rearth)进行了边缘探测,测量了$374\pm170$ ppm的凌日深度。这是C…
在过去40年中,空间天文学主要是由低地球轨道航天器完成的,低地球轨道航天器的技术已得到验证,运载机制也很容易获得。然而,随着商业航空航天飞行任务的激增,新的机会正在出现。我们在这里描述这样一种可能性:在月球上部署一个小型仪器。这可以通过搭载印度参加Google Lunar X PRIZE竞赛的Indus团队任务来实现,该任务预计将向月球运送近30公斤的有效载荷,其中火星车作为其主要有效载荷。我们建议安装一个宽视场远紫外(130- 180纳米)成像望远镜作为印度队着陆器上的有效载荷。我们的基线操作是一个固定的天顶指向,但有一个机制,允许不同的态度观测选项。指向中间黄道纬度(50度或以上)确保太阳在任何时候都至少偏离视线40度。在这个位置,望远镜可以覆盖银河系的高纬度地区以及部分银河系平面。这种前景的科学目标进行了划定和讨论。