arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 1701.03997math.NAcs.NA
收藏

线性平滑扩展有限元法

Linear smoothed extended finite element method

Academy of Scientific and Innovative Research, CSIR-Structural Engineering Research Center(印度科学研究所学院,CSIR结构工程研究中心);Center for Scientific and Industrial Research(科学与工业研究中心);Department of Mechanical Engineering, Indian Institute of Technology, Madras(印度马德拉斯理工学院机械工程系);Faculté des Sciences, de la Technologie et de al Communication, University of Luxembourg(卢森堡大学科学与技术通信学院)

M Surendran, S Natarajan, SPA Bordas, GS Palani

AI总结:

本文提出线性平滑扩展有限元法,通过改进数值积分方法提高高阶多项式场的精度,验证了其在裂纹力学中的有效性与高效性。

摘要:

扩展有限元法(XFEM)于1999年提出,用于处理不连续性问题,无需或极少重新 mesh,通过适当的富集函数实现。这使元素能够被不连续性分割,强或弱,因此需要在基本体积上积分不连续函数或导数不连续的函数。此外,在开放表面和奇点的情况下,通常需要积分特殊、非多项式函数。为方便这些特殊类型的数值积分,已提出多种方法,已证明对数值解的精度和收敛性有较大影响。例如,平滑扩展有限元法(SmXFEM)通过将体积积分转换为表面积分,使数值积分变得优雅而简单。然而,在[1,2]中报告,当基函数中存在非多项式函数时,平滑的应变不准确。这是由于在平滑域上使用常数平滑函数,破坏了奇点的效果。本文研究了一种最近开发的线性平滑方法[3],该方法在基函数中提供更好的高阶多项式场近似。一些线弹性断裂力学(LEFM)的基准问题被解决,以比较标准XFEM、常数平滑XFEM(Sm-XFEM)和线性平滑XFEM(LSm-XFEM)。我们观察到三种方法的收敛率相同。然而,通过所提出的LSm-XFEM计算的应力强度因子(SIFs)比通过Sm-XFEM得到的更准确。总之,与传统XFEM相比,相同阶的精度在相对较低的计算努力下得以实现。

英文摘要:

The extended finite element method (XFEM) was introduced in 1999 to treat problems involving discontinuities with no or minimal remeshing through appropriate enrichment functions. This enables elements to be split by a discontinuity, strong or weak and hence requires the integration of discontinuous functions or functions with discontinuous derivatives over elementary volumes. Moreover, in the case of open surfaces and singularities, special, usually non-polynomial functions must also be integrated. A variety of approaches have been proposed to facilitate these special types of numerical integration, which have been shown to have a large impact on the accuracy and the convergence of the numerical solution. The smoothed extended finite element method (SmXFEM) [1], for example, makes numerical integration elegant and simple by transforming volume integrals into surface integrals. However, it was reported in [1, 2] that the strain smoothing is inaccurate when non-polynomial functions are in the basis. This is due to the constant smoothing function used over the smoothing domains which destroys the effect of the singularity. In this paper, we investigate the benefits of a recently developed Linear smoothing procedure [3] which provides better approximation to higher order polynomial fields in the basis. Some benchmark problems in the context of linear elastic fracture mechanics (LEFM) are solved to compare the standard XFEM, the constant-smoothed XFEM (Sm-XFEM) and the linear-smoothed XFEM (LSm-XFEM). We observe that the convergence rates of all three methods are the same. The stress intensity factors (SIFs) computed through the proposed LSm-XFEM are however more accurate than that obtained through Sm-XFEM. To conclude, compared to the conventional XFEM, the same order of accuracy is achieved at a relatively low computational effort.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑