The determination of atmospheric parameters depends on the use of radiative transfer codes (among other elements such as model atmospheres) to compute synthetic spectra and/or derive abundances from equivalent widths. However, it is common to mix results from different surveys/studies where different setups were used to derive the parameters. These inhomogeneities can lead us to inaccurate conclusions. In this work, we studied one aspect of the problem: When deriving atmospheric parameters from high-resolution stellar spectra, what differences originate from the use of different radiative transfer codes?
To study stellar populations, it is common to combine chemical abundances from different spectroscopic surveys/studies where different setups were used. These inhomogeneities can lead us to inaccurate scientific conclusions. In this work, we studied one aspect of the problem: When deriving chemical abundances from high-resolution stellar spectra, what differences originate from the use of different radiative transfer codes?
Based on luminosity contributions, we develop a spectroscopic modelling method to derive atmospheric parameters of component stars in binary systems. The method is designed for those spectra of binaries which show double-lined features due to the radial velocities differences between the component stars. We first derive the orbital parameters and the stellar radii by solving the light and radial velocity curves. Then the luminosity contributions in different phases can be calculated. The synthesised double-lined spectra model is constructed by superposing theoretical single-star spectra accord…
We present new ultra-metal-poor (UMP) stars parameters with [Fe/H]<-4.0 based on line-by-line non-local thermodynamic equilibrium (NLTE) abundances using an up-to-date iron model atom with a new recipe for non-elastic hydrogen collision rates. We study the departures from LTE in their atmospheric parameter and show that they can grow up to ~1.0 dex in [Fe/H], 150K in Teff and 0.5 dex in log g toward the lowest metallicities. Accurate NLTE atmospheric stellar parameters, in particular [Fe/H] being signifcantly higher, are the first step to eventually providing full NLTE abundance patterns that …
We present a comparative analysis of atmospheric parameters obtained with the so-called photometric and spectroscopic techniques. Photometric and spectroscopic data for 1360 DA white dwarfs from the Sloan Digital Sky Survey (SDSS) are used, as well as spectroscopic data from the Villanova White Dwarf Catalog. We first test the calibration of the ugriz photometric system by using model atmosphere fits to observed data. Our photometric analysis indicates that the ugriz photometry appears well calibrated when the SDSS to AB_95 zeropoint corrections are applied. The spectroscopic analysis of the s…
Context. An increasing number of high-resolution stellar spectra is available today thanks to many past and ongoing extensive spectroscopic surveys. Consequently, the scientific community needs automatic procedures to derive atmospheric parameters and individual element abundances. Aims. Based on the widely known SPECTRUM code by R. O. Gray, we developed an integrated spectroscopic software framework suitable for the determination of atmospheric parameters (i.e., effective temperature, surface gravity, metallicity) and individual chemical abundances. The code, named iSpec and freely distribute…
The asteroseismic and planetary studies, like all research related to stars, need precise and accurate stellar atmospheric parameters as input. We aim at deriving the effective temperature (Teff), the surface gravity (log g), the metallicity ([Fe/H]), the projected rotational velocity (v sin i) and the MK type for 169 F, G, K, and M-type Kepler targets which were observed spectroscopically from the ground with five different instruments. We use two different spectroscopic methods to analyse 189 high-resolution, high-signal-to-noise spectra acquired for the 169 stars. For 67 stars, the spectros…
We present revised basic stellar astrophysical parameters: masses, luminosities, ages and radii for 342 stars from PennState-Toruń Centre for Astronomy Planet Search. Atmospheric parameters for 327 stars are available from Zieliński (2012), for the remaining 15 objects we present also spectroscopic atmospheric parameters: effective temperatures, surface gravities and iron abundances. Spectroscopic atmospheric parameters were obtained with a standard spectroscopic analysis procedure, using ARES (Sousa, 2007) and MOOG (Sneden, 1973) or TGVIT (Takeda, 2005) codes. To refine stellar masses, ages a…
We present a spectroscopic survey of known and candidate $γ$\,Doradus stars. The high-resolution, high signal-to-noise spectra of 52 objects were collected by five different spectrographs. The spectral classification, atmospheric parameters (\teff, $\log g$, $ξ$), $v\sin i$ and chemical composition of the stars were derived. The stellar spectral and luminosity classes were found between G0-A7 and IV-V, respectively. The initial values for \teff\ and \logg\ were determined from the photometric indices and spectral energy distribution. Those parameters were improved by the analysis of hydrogen l…
As a well-established procedure for the vast majority of normal main-sequence stars, determination of atmospheric and stellar parameters turns to be a challenging process in case of magnetic chemically peculiar stars. Inhomogeneous distribution of chemical elements and strong magnetic fields make most of the standard photometric and spectroscopic calibrations inapplicable for this class of stars. In this work we make use of available observed energy distributions calibrated to absolute units, stellar parallaxes, high-resolution spectroscopic observations, and advanced stellar atmosphere models…
In this paper we present a detailed spectroscopic analysis of the suspected marginal Am star HD\,71297. Our goal is to test the accuracy of two different approaches to determine the atmospheric parameters effective temperature, gravity, projected rotational velocity, and chemical abundances. The methods used in this paper are: classical spectral synthesis and the {\it Versatile Wavelength Analysis} ({\sl VWA}) software. Since our star is bright and very close to the Sun, we were able to determine its effective temperature and gravity directly through photometric, interferometric, and parallax …
The technical aspects in the use of an Equivalent Width (EW) method are described for the derivation of spectroscopic stellar parameters with ARES+MOOG. While the science description behind this method can be found in many references, here the goal is to provide a user manual approach for the codes and scripts presented in for the tutorial. All the required data is available online (https://github.com/sousasag/school_codes).
Accurate fundamental parameters of stars are mandatory for the asteroseismic investigation of the Kepler mission to succeed. We will determine the atmospheric parameters for a sample of 6 well-studied bright K giants to confirm that our method produces reliable results. We then apply the same method to 14 K giants that are targets for the Kepler mission. We have used high-resolution, high signal-to-noise spectra from the FIES spectrograph on the Nordic Optical Telescope. We used the iterative spectral synthesis method VWA to derive the fundamental parameters from carefully selected high-qualit…
The mass (M) of a star can be evaluated from its spectroscopically determined effective temperature (T _eff) and metallicity ([Fe/H]) along with the luminosity (L; derived from parallax), while comparing them with grids of theoretical evolutionary tracks. It has been argued, however, that such a track-based mass (M_trk) may tend to be overestimated for the case of red giants. Meanwhile, there is an alternative approach of evaluating mass (M_gLT) directly from surface gravity (g), L, and T_eff. The practical reliability of M_gLT was examined for ~100 benchmark giants in the Kepler field, for wh…
In the era of vast spectroscopic surveys focusing on Galactic stellar populations, astronomers want to exploit the large quantity and good quality of data to derive their atmospheric parameters without losing precision from automatic procedures. In this work, we developed a new spectral package, FASMA, to estimate the stellar atmospheric parameters (namely effective temperature, surface gravity, and metallicity) in a fast and robust way. This method is suitable for spectra of FGK-type stars in medium and high resolution. The spectroscopic analysis is based on the spectral synthesis technique u…
Spectroscopic study of the late B-type eclipsing binary system AR Aurigae A and B: Towards clarifying the differences in atmospheric parameters and chemical abundances
Context: StePar is an automatic code written in Python 3.X designed to compute the stellar atmospheric parameters Teff, log(g), [Fe/H], and of FGK-type stars by means of the EW method. This code has already been extensively tested in different spectroscopic studies of FGK-type stars with several spectrographs and against myriads of Gaia-ESO Survey UVES U580 spectra of late-type, low-mass stars as one of its thirteen pipelines. Aims: We describe the code and test it against a library of well characterised Gaia benchmark stars. We also release the code to the community and provide the link for d…
We have conducted a spectroscopic survey of over 1300 bright (V < 17.5), hydrogen-rich white dwarfs based largely on the last published version of the McCook & Sion catalog. The complete results from our survey, including the spectroscopic analysis of over 1100 DA white dwarfs, are presented. High signal-to-noise ratio optical spectra were obtained for each star and were subsequently analyzed using our standard spectroscopic technique where the observed Balmer line profiles are compared to synthetic spectra computed from the latest generation of model atmospheres appropriate for these stars. F…
Precise fundamental atmospheric stellar parameters and abundance determination of individual elements in stars are important for all stellar population studies. Non-Local Thermodynamic Equilibrium (Non-LTE; hereafter NLTE) models are often important for such high precision, however, can be computationally complex and expensive, which renders the models less utilized in spectroscopic analyses. To alleviate the computational burden of such models, we developed a robust 1D, LTE and NLTE fundamental atmospheric stellar parameter derivation tool, $\texttt{LOTUS}$, to determine the effective tempera…
Time-resolved spectroscopic observations of rapidly oscillating Ap (roAp) stars show a complex picture of propagating magneto-acoustic pulsation waves, with amplitude and phase strongly changing as a function of atmospheric height. We have recently conducted numerical, non-linear MHD simulations to get an insight into the complex atmospheric dynamics of magnetic pulsators. Here we use the resulting time-dependent atmospheric structure and velocity field to predict line profile variations for roAp stars. These calculations use realistic atmospheric structure, account for vertical chemical strat…
In this paper, we present a detailed high-resolution spectroscopic study of post main sequence stars in the Globular Cluster M68. Our sample, which covers a range of 4000 K in $T_{eff}$, and 3.5 dex in $log(g)$, is comprised of members from the red giant, red horizontal, and blue horizontal branch, making this the first high-resolution globular cluster study covering such a large evolutionary and parameter space. Initially, atmospheric parameters were determined using photometric as well as spectroscopic methods, both of which resulted in unphysical and unexpected $T_{eff}$, $log(g)$, $ξ_{t}$,…
The detection and subsequent characterisation of exoplanets are intimately linked to the characteristics of their host star. Therefore, it is necessary to study the star in detail in order to understand the formation history and characteristics of their companion(s). Our aims were to develop a community tool that allows the automated calculation of stellar parameters for a large number of stars, using high resolution echelle spectra and minimal photometric magnitudes, and introduce the first results in this work. We measured the equivalent widths of several iron lines and used them to solve th…
We present a detailed spectroscopic analysis of 61 low mass white dwarfs and provide precise atmospheric parameters, masses, and updated binary system parameters based on our new model atmosphere grids and the most recent evolutionary model calculations. For the first time, we measure systematic abundances of He, Ca and Mg for metal-rich extremely low mass white dwarfs and examine the distribution of these abundances as a function of effective temperature and mass. Based on our preliminary results, we discuss the possibility that shell flashes may be responsible for the presence of the observe…
Solar twins and analogs are fundamental in the characterization of the Sun's place in the context of stellar measurements, as they are in understanding how typical the solar properties are in its neighborhood. They are also important for representing sunlight observable in the night sky for diverse photometric and spectroscopic tasks, besides being natural candidates for harboring planetary systems similar to ours and possibly even life-bearing environments. We report a photometric and spectroscopic survey of solar twin stars within 50 pc of the Sun. Hipparcos absolute magnitudes and (B-V)_Tyc…
Mining the Kepler Field: Atmospheric Parameters, Bolometric Corrections, and Luminosities
Instituto de Astrofísica de Canarias (IAC)（加那利天体物理学研究所）；Universidad de La Laguna (ULL)（拉古纳大学）；Lowell Observatory（洛厄尔天文台）；Instituto de Astrofísica e Ciências do Espaço, Universidade do Porto（葡萄牙大学空间天体物理学与科学研究所）；Departamento de Física e Astronomia, Universidade do Porto（波尔图大学物理与天文学系）；Université Paris-Saclay, Université Paris Cité, CEA, CNRS, AIM（巴黎萨克雷大学、巴黎西岱大学、法国原子能与替代能源委员会、法国国家科学研究中心、天体物理学信息与方法实验室）
SDSS-IV APOGEE-2, GALAH and Gaia-ESO are high resolution, ground-based, multi-object spectroscopic surveys providing fundamental stellar atmospheric parameters and multiple elemental abundance ratios for hundreds of thousands of stars of the Milky Way. We undertake a comparison between the most recent data releases of these surveys to investigate the accuracy and precision of derived parameters by placing the abundances on an absolute scale. We discuss the correlations in parameter and abundance differences as a function of main parameters. Uncovering the variants provides a basis to on-going …
Context: Accurate fundamental parameters of stars are essential for the asteroseismic analysis of data from the NASA Kepler mission. Aims: We aim at determining accurate atmospheric parameters and the abundance pattern for a sample of 82 red giants that are targets for the Kepler mission. Methods: We have used high-resolution, high signal-to-noise spectra from three different spectrographs. We used the iterative spectral synthesis method VWA to derive the fundamental parameters from carefully selected high-quality iron lines. After determination of the fundamental parameters, abundances of 13 …
Spectroscopic follow-up of hot subdwarf variables found in ZTF -- Atmospheric and fundamental properties of radial-mode sdB pulsators
Hamburger Sternwarte, University of Hamburg（汉堡天文台，汉堡大学）；Department of Physics and Astronomy, Texas Tech University（德克萨斯理工大学物理与天文学系）；Department of Physics and Astronomy, University of North Carolina at Chapel Hill（北卡罗来纳大学教堂山分校物理与天文学系）；Institut für Physik und Astronomie, Universität Potsdam（波茨坦大学物理与天文学研究所）
Precise stellar parameters are crucial for several reasons, amongst which are the precise characterization of orbiting exoplanets and the correct determination of galactic chemical evolution. The atmospheric parameters are extremely important because all the other stellar parameters depend on them. Using our standard equivalent-width method on high-resolution spectroscopy, good precision can be obtained for the derived effective temperature and metallicity. The surface gravity, however, is usually not well constrained with spectroscopy. We use two different samples of FGK dwarfs to study the e…
Playing CHESS with stars. I. Search for similar stars in large spectroscopic data sets
Nicolaus Copernicus Astronomical Center, Polish Academy of Sciences（波兰科学院尼古拉·哥白尼天文学中心）；Instituto de Astrofísica, Pontificia Universidad Católica de Chile（智利天主教大学天体物理研究所）；Centro de Astro-Ingeniería, Pontificia Universidad Católica de Chile（智利天主教大学天体工程中心）
The GALEX General Data Release 4/5 includes 174 spectroscopic tiles, obtained from slitless grism observations, for a total of more than 60,000 ultraviolet spectra. We have determined statistical properties of the sample of GALEX stars. We have defined a suitable system of spectroscopic indices, which measure the main mid-UV features at the GALEX low spectral resolution and we have employed it to determine the atmospheric parameters of of stars in the range 4500<Teff<9000 K. Our preliminary results indicate that the sample is formed by a majority of main sequence F- and G-type stars, with meta…
Context. Obtaining precise stellar and wind properties and abundance patterns of massive stars is crucial to understanding their nature and interactions with their environments, as well as to constrain their evolutionary paths and end-products. Aims. To enable higher versatility and precision of the complete UV to optical range, we improve our NLTE atmosphere and spectrum synthesis code FASTWIND. We also aim to obtain an advanced description of X-ray emission from wind-embedded shocks. Methods. We include a detailed comoving frame radiative transfer for the essential frequency range, but still…
We present basic atmospheric parameters (Teff, logg, vt and [Fe/H]) as well as luminosities, masses, radii and absolute radial velocities for 348 stars, presumably giants, from the ~1000 star sample observed within the Penn State-Torun Centre for Astronomy Planet Search with the High Resolution Spectrograph of the 9.2m Hobby-Eberly Telescope. The stellar parameters are key ingredients in proper interpretation of newly discovered low-mass companions while a systematic study of the complete sample will create a basis for future statistical considerations concerning low-mass companions appearance…
Eclipsing, spectroscopic double-lined (SB2) binaries remain to be the prime source of precise and accurate fundamental properties of stars. Furthermore, high-cadence spectroscopic observations of the eclipse phases allow us to resolve the Rossiter-McLaughlin effect whose modelling offers the means to probe spin-orbit misalignment in binaries. In this study, we develop the LSDBinary algorithm that is capable of working with both in-eclipse and out-of-eclipse spectra of SB2 binaries as input and delivers the LSD profiles, LSD-based model spectra, and precise RVs of both binary components as outp…
X-rays/EUV radiation emitted from wind-embedded shocks in hot, massive stars can affect the ionization balance in their outer atmospheres, and can be the mechanism responsible for the production of highly ionized species. To allow for these processes in the context of spectral analysis, we have implemented such emission into our unified, NLTE model atmosphere/spectrum synthesis code FASTWIND. The shock structure and corresponding emission is calculated as a function of user-supplied parameters. We account for a temperature and density stratification inside the post-shock cooling zones, calcula…
Exoplanet properties depend on how well the host star is characterized. For instance, the stellar atmospheric parameters (i.e., effective temperature, surface gravity and overall metallicity) are needed to derive the stellar mass and radius by using evolutionary stellar models or empirical calibrations. I studied how the stellar uncertainties impact the determination of planetary characteristics. By using high-resolution spectra and iSpec, I evaluated how discrepancies between two different spectroscopic approaches (the equivalent method and the synthetic spectral fitting technique) can signif…
[Abridged] Clumping in the radiation-driven winds of hot, massive stars affects the derivation of synthetic observables across the electromagnetic spectrum. We implement a formalism for treating wind clumping - in particular the light-leakage effects associated with a medium that is porous in physical and velocity space - into the global (photosphere+wind) NLTE model atmosphere code FASTWIND. We assume a stochastic, two-component wind consisting of a mixture of optically thick and thin clumps embedded in a rarefied inter-clump medium. We account fully for the reductions in opacity associated w…
Atmospheric parameters determined via spectral modelling are unavailable for many of the known magnetic early B-type stars. We utilized high-resolution spectra together with NLTE models to measure effective temperatures $T_{\rm eff}$ and surface gravities $\log{g}$ of stars for which these measurements are not yet available. We find good agreement between our $T_{\rm eff}$ measurements and previous results obtained both photometrically and spectroscopically. For $\log{g}$, our results are compatible with previous spectroscopic measurements; however, surface gravities of stars previously determ…
In this paper, we present corrections to the spectroscopic parameters of DB and DBA white dwarfs with -10.0 < log(H/He) < -2.0, 7.5 < log(g) < 9.0 and 12000 K < T_eff < 34000 K, based on 282 3D atmospheric models calculated with the CO5BOLD radiation-hydrodynamics code. These corrections arise due to a better physical treatment of convective energy transport in 3D models when compared to the previously available 1D model atmospheres. By applying the corrections to an existing SDSS sample of DB and DBA white dwarfs, we find significant corrections both for the effective temperature and surface …
We report new metallicities for stars of Galactic globular cluster M4 using the largest number of stars ever observed at high spectral resolution in any cluster. We analyzed 7250 spectra for 2771 cluster stars gathered with the VLT FLAMES+GIRAFFE spectrograph at VLT. These medium resolution spectra cover by a small wavelength range, and often have very low signal-to-noise ratios. We attacked this dataset by reconsidering the whole method of abundance analysis of large stellar samples from beginning to end. We developed a new algorithm that automatically determines the atmospheric parameters of…
We present the first grid of mean three-dimensional (3D) spectra for pure-hydrogen (DA) white dwarfs based on 3D model atmospheres. We use CO5BOLD radiation-hydrodynamics 3D simulations instead of the mixing-length theory for the treatment of convection. The simulations cover the effective temperature range of 6000 < Teff (K) < 15,000 and the surface gravity range of 7 < log g < 9 where the large majority of DAs with a convective atmosphere are located. We rely on horizontally averaged 3D structures (over constant Rosseland optical depth) to compute <3D> spectra. It is demonstrated that our <3…
A spectroscopic analysis of stellar spectra can be carried out using different approaches; different methods, line lists, atomic parameters, solar abundances etc. The resulting atmospheric parameters from these choices can vary beyond quoted uncertainties in the literature. Here we characterize these differences by systematically comparing some of the commonly adopted ingredients; line lists, equivalent width measurements and atomic parameters. High resolution and high signal-to-noise spectroscopic data of one helium-core-burning red giant star in each of the three open clusters, NGC6819, M67 …
Context. Precise stellar parameters are crucial in exoplanet research for correctly determining of the planetary parameters. For stars hosting a transiting planet, determining of the planetary mass and radius depends on the stellar mass and radius, which in turn depend on the atmospheric stellar parameters. Different methods can provide different results, which leads to different planet characteristics.}%Spectroscopic surface gravities have shown to be poorly constrained, but the photometry of the transiting planet can provide an independent measurement of the surface gravity. Aims. In this pa…
BA-type supergiants show a high potential as versatile indicators for modern astronomy. The focus here is on the determination of accurate and precise atmospheric parameters for a sample of 35 Galactic BA-type supergiants. Some first applications include a recalibration of functional relationships between spectral-type, intrinsic colours, bolometric corrections and effective temperature, and an exploration of the reddening-free Johnson Q and Strömgren [c_1] and beta-indices as photometric indicators for effective temperatures and gravities of BA-type supergiants. An extensive grid of theoretic…
We have conducted a search for L subdwarf candidates within the photometric catalogues of the UKIRT Infrared Deep Sky Survey and Sloan Digital Sky Survey. Six of our candidates are confirmed as L subdwarfs spectroscopically at optical and/or near infrared wavelengths. We also present new optical spectra of three previously known L subdwarfs (WISEA J001450.17-083823.4, 2MASS J00412179+3547133, ULAS J124425.75+102439.3). We examined the spectral types and metallicity subclasses classification of known L subdwarfs. We summarised the spectroscopic properties of L subdwarfs with different spectral …
All of the 14 subfields of the Kepler field have been observed at least once with the Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST, Xinglong Observatory, China) during the 2012-2014 observation seasons. There are 88,628 reduced spectra with SNR$_g$ (signal-to-noise ratio in g band) $\geq$ 6 after the first round (2012-2014) of observations for the LAMOST-Kepler project (LK-project). By adopting the upgraded version of the LAMOST Stellar Parameter pipeline (LASP), we have determined the atmospheric parameters ($T_{\rm eff}$ , $\log g$, and $\rm [Fe/H]$) and heliocentric rad…
Context: Effective temperature, surface gravity, and metallicity are basic spectroscopic stellar parameters necessary to characterize a star or a planetary system. Reliable atmospheric parameters for FGK stars have been obtained mostly from methods that relay on high resolution and high signal-to-noise optical spectroscopy. The advent of a new generation of high resolution near-IR spectrographs opens the possibility of using classic spectroscopic methods with high resolution and high signal-to-noise in the NIR spectral window. Aims: We aim to compile a new iron line list in the NIR from a sola…
Studies of Galactic chemical and dynamical evolution in the solar neighborhood depend on the availability of precise atmospheric parameters (Teff, [Fe/H] and log g) for solar-type stars. Many large-scale spectroscopic surveys operate at low to moderate spectral resolution for efficiency in observing large samples, which makes the stellar characterization difficult due to the high degree of blending of spectral features. While most surveys use spectral synthesis, in this work we employ an alternative method based on spectral indices to determine the atmospheric parameters of a sample of nearby …
We present Gemini South/IGRINS observations of the 1060 K T6 dwarf 2MASS J08173001$-$6155158 with unprecedented resolution ($R\equivλ/Δλ=45\,000$) and signal-to-noise ratio (SNR > 200) for a late-type T dwarf. We use this benchmark observation to test the reliability of molecular line lists used up-to-date atmospheric models. We determine which spectroscopic regions should be used to estimate the parameters of cold brown dwarfs and, by extension, exoplanets. We present a detailed spectroscopic atlas with molecular identifications across the $H$ and $K$ bands of the near-infrared. We find that …
Our preliminary results from laboratory experiments studying white dwarf (WD) photospheres show a systematic difference between experimental plasma conditions inferred from measured H$β$ absorption line profiles versus those from H$γ$. One hypothesis for this discrepancy is an inaccuracy in the relative theoretical line profiles of these two transitions. This is intriguing because atmospheric parameters inferred from H Balmer lines in observed WD spectra show systematic trends such that inferred surface gravities decrease with increasing principal quantum number, $n$. If conditions inferred fr…
In the context of large spectroscopic surveys of stars, data-driven methods are key in deducing physical parameters for millions of spectra in a short time. Convolutional neural networks (CNNs) enable us to connect observables (e.g. spectra, stellar magnitudes) to physical properties (atmospheric parameters, chemical abundances, or labels in general). We trained a CNN, adopting stellar atmospheric parameters and chemical abundances from APOGEE DR16 (resolution R=22500) data as training set labels. As input, we used parts of the intermediate-resolution RAVE DR6 spectra (R~7500) overlapping with…
We present results from an observing campaign to identify low-metallicity stars in the Best & Brightest Survey. From medium-resolution (R ~ 1, 200 - 2, 000) spectroscopy of 857 candidates, we estimate the stellar atmospheric parameters (Teff, log g, and [Fe/H]), as well as carbon and alpha-element abundances. We find that 69% of the observed stars have [Fe/H] <= -1.0, 39% have [Fe/H] <= -2.0, and 2% have [Fe/H] <= -3.0. There are also 133 carbon-enhanced metal-poor (CEMP) stars in this sample, with 97 CEMP Group I and 36 CEMP Group II stars identified in the A(C) versus [Fe/H] diagram. A subse…
We present improved calculations for the Stark broadening of hydrogen lines in dense plasmas typical of white dwarf atmospheres. Our new model is based on the unified theory of Stark broadening from Vidal, Cooper, & Smith. For the first time, we account for the non-ideal effects in a consistent way directly inside the line profile calculations. The Hummer & Mihalas theory is used to describe the non-ideal effects due to perturbations on the absorber from protons and electrons. We use a truncation of the electric microfield distribution in the quasi-static proton broadening to take into account…
The Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST) Low Resolution Spectroscopic Survey (LRS) provides massive spectroscopic data of M-type stars, and the derived stellar parameters could bring vital help to various studies. We adopt the ULySS package to perform $χ^2$ minimization with model spectra generated from the MILES interpolator, and determine the stellar atmospheric parameters for the M-type stars from LAMOST LRS Data Release (DR) 8. Comparison with the stellar parameters from APOGEE Stellar Parameter and Chemical Abundance Pipeline (ASPCAP) suggests that most of ou…
