arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 1609.04315astro-ph.IM
收藏

基于BSIM3噪声模型的CMOS像素源极跟随器噪声优化

Noise optimization of the source follower of a CMOS pixel using BSIM3 noise model

Swaraj Mahato, Guy Meynants, Gert Raskin, J. De Ridder, H. Van Winckel

摘要:

CMOS成像器在天文学中越来越受欢迎。需要非常低的噪声水平来观察极其微弱的目标并获得高精度的通量测量。虽然CMOS技术提供了许多优于CCD的优点,但主要的瓶颈仍然是读取噪声。要从工业CMOS传感器转变为适合科学应用的CMOS传感器,必须改进设计以优化噪声水平。在这里,我们详细研究了CMOS像素的源极跟随器(SF)的1/f和热噪声性能。我们确定了相关的设计参数,并分析研究其对噪声水平的影响,使用BSIM 3v 3噪声模型与栅极电容的增强模型。我们的详细分析表明,1/f噪声对源极跟随器的几何尺寸的依赖性不限于最小沟道长度,相比,经典的方法,以实现最小的1/f噪声。我们推导出最佳的栅极尺寸(宽度和长度)的源极跟随器,最大限度地减少1/f噪声,并验证我们的结果使用数值模拟。通过考虑热噪声或白噪声以及1/f噪声,源极跟随器的总输入噪声取决于电容比CG/CFD和漏极电流(Id)。这里,CG是源极跟随器的总栅极电容,CFD是源极跟随器输入端的总浮置扩散电容。我们证明,最佳栅极电容(CG)取决于所选择的偏置电流,但范围从CFD/3到CFD,以实现最小的源极跟随器的总噪声。数值计算和180 nm CMOS工艺的电路模拟验证了我们的结果。

英文摘要:

CMOS imagers are becoming increasingly popular in astronomy. A very low noise level is required to observe extremely faint targets and to get high-precision flux measurements. Although CMOS technology offers many advantages over CCDs, a major bottleneck is still the read noise. To move from an industrial CMOS sensor to one suitable for scientific applications, an improved design that optimizes the noise level is essential. Here, we study the 1/f and thermal noise performance of the source follower (SF) of a CMOS pixel in detail. We identify the relevant design parameters, and analytically study their impact on the noise level using the BSIM3v3 noise model with an enhanced model of gate capacitance. Our detailed analysis shows that the dependence of the 1/f noise on the geometrical size of the source follower is not limited to minimum channel length, compared to the classical approach to achieve the minimum 1/f noise. We derive the optimal gate dimensions (the width and the length) of the source follower that minimize the 1/f noise, and validate our results using numerical simulations. By considering the thermal noise or white noise along with 1/f noise, the total input noise of the source follower depends on the capacitor ratio CG/CFD and the drain current (Id). Here, CG is the total gate capacitance of the source follower and CFD is the total floating diffusion capacitor at the input of the source follower. We demonstrate that the optimum gate capacitance (CG) depends on the chosen bias current but ranges from CFD/3 to CFD to achieve the minimum total noise of the source follower. Numerical calculation and circuit simulation with 180nm CMOS technology are performed to validate our results.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑