Multi-TeV center of mass energy ep colliders based on the Future Circular Collider (FCC) and linear colliders (LC) are proposed and corresponding luminosity values are estimated. Parameters of upgraded versions of the FCC are determined to optimize luminosity of electron-proton collisions keeping beam-beam effects in mind. It is shown that L_{ep}\sim10^{32}\,cm^{-2}s^{-1} can be achieved with moderate upgrade of the FCC parameters.
The advantage of the linac-ring type electron proton collider is that it allows for the straightforward construction of $γ$p collider. In a $γ$p collider high energy photons can be generated from Compton backscattering of laser photons off electrons from a linear accelerator. In this study main parameters of photon-proton colliders based on some future electron linear accelerator projects and protons supplied form LHC or FCC are evaluated.
SPPC (Super Proton-Proton Collider) is a discovery machine that is designed for energy frontier research in two decades from now, as the second stage of the CEPC-SPPC project. The main objective is to carry out experiments at 125 TeV in center-of-mass energy in a two-ring collider of 100 km in circumference and 20 T in dipole field. This white paper about SPPC describes the machine related issues, including performance, design overview, design challenges, key technologies and their maturity and required R&D, staged options and upgrades, synergies with other facilities, and environmental impact…
The discovery of a Higgs-like boson with mass near 126 GeV, at the LHC, has reignited interest in future energy frontier colliders. We propose here a proton-proton (pp) collider in a 100 km ring, with center of mass (CM) energy of ~100 TeV which would have substantial discovery potential for new heavy particles and new physics beyond the Standard Model. In the case that LHC experiments have already found exotic resonances or heavy "partner" particles, this collider could fill out the "tower" of resonances (thus e.g. confirming an extra dimension) or the full suite of partner particles (e.g. fo…
Following the discovery of the Higgs boson at LHC, new large colliders are being studied by the international high-energy community to explore Higgs physics in detail and new physics beyond the Standard Model. In China, a two-stage circular collider project CEPC-SPPC is proposed, with the first stage CEPC (Circular Electron Positron Collier, a so-called Higgs factory) focused on Higgs physics, and the second stage SPPC (Super Proton-Proton Collider) focused on new physics beyond the Standard Model. This paper discusses this second stage.
In this study, main parameters of Super proton-proton Collider (SppC) based lepton-proton colliders are estimated. For electron beam parameters, highest energy International Linear Collider (ILC) and Plasma Wake Field Accelerator-Linear Collider (PWFA-LC) options are taken into account. For muon beams, 1.5 TeV and 3 TeV center of mass energy Muon Collider parameters are used. In addition, ultimate $μ$p collider which assumes construction of additional 50 TeV muon ring in the SppC tunnel is considered as well. It is shown that $L_{ep}$ $\sim$ $10^{32}$ $cm^{-2}s^{-1}$ can be achieved with moder…
In this paper we showed a systematic method of appropriate parameter choice for a circular pp collider by using analytical expression of beam-beam tune shift limit started from given design goal and technical limitations. A parameter space has been explored. Based on parameters scan and considerations from RF systems, a set of appropriate parameter designed for a 50Km and a 100Km circular proton-proton collider was proposed.
Since the CERN ISR, hadron colliders have defined the energy frontier. Noteworthy are the conversion of the Super Proton Synchrotron (SPS) into a proton-antiproton collider, the Tevatron collider, as well as the abandoned SSC in the United States. Hadron colliders are likely to determine the pace of particle-physics progress also during the next hundred years. Discoveries at past hadron colliders were essential for establishing the so-called Standard Model of particle physics. The world's present flagship collider, the LHC, including its high-luminosity upgrade HL-LHC, is set to operate throug…
During the proton-anti proton collider run several experiments were carried out in order to understand the effect of the beam-beam interaction on backgrounds and lifetimes. In this talk a selection of these experiments will be presented. From these experiments, the importance of relative beam sizes and tune ripple could be demonstrated.
Recent simulations have shown that a high-energy proton bunch can excite strong plasma wakefields and accelerate a bunch of electrons to the energy frontier in a single stage of acceleration. It therefore paves the way towards a compact future collider design using the proton beams from existing high-energy proton machines, e.g. Tevatron or the LHC. This paper addresses some key issues in designing a compact electron-positron linear collider and an electron-proton collider based on existing CERN accelerator infrastructure.
Construction of future Muon Collider (or dedicated mu-ring) tangential to the energy frontier pp colliders will give opportunity to realize mu-p collisions at multi-TeV center of mass energies at a luminosity of order of $10^{33}$ cm$^{-2}$s$^{-1}$ ($10^{34}$ cm$^{-2}$s$^{-1}$). Obviously, such colliders will essentially enlarge the physics search potential of corresponding muon and hadron colliders for both the SM (especially for clarifying QCD basics) and BSM phenomena. This paper is devoted to review of main parameters of mu-p colliders proposed until now.
Recent simulation shows that a self-modulated high energy proton bunch can excite a large amplitude plasma wakefield and accelerate an externally injected electron bunch to the energy frontier in a single stage acceleration through a long plasma channel. Based on this scheme, future colliders, either an electron-positron linear collider (e+-e- collider) or an electron-hadron collider (e-p collider) can be conceived. In this paper, we discuss some key design issues for an e+-e- collider and a high energy e-p collider, based on the existing infrastructure of the CERN accelerator complex.
Construction of the ERLC (twin LC) collider tangential to LHC or FCC will give opportunity to realize ep collisions at multi-TeV center-of-mass energies. Luminosity estimations show that values well exceeding 10^34 cm^-2s^-1 can be achieved for HL-LHC, HE-LHC and FCC based ep colliders. Certainly, proposed ep colliders have great potential for clarifying QCD basics and new physics search in addition to providing precise PDFs for adequate interpretation of LHC and FCC experimental data.
Recent simulations have shown that a high-energy proton bunch can excite strong plasma wakefields and accelerate a bunch of electrons to the energy frontier in a single stage of acceleration. This scheme could lead to a future $ep$ collider using the LHC for the proton beam and a compact electron accelerator of length 170 m, producing electrons of energy up to 100 GeV. The parameters of such a collider are discussed as well as conceptual layouts within the CERN accelerator complex. The physics of plasma wakefield acceleration will also be introduced, with the AWAKE experiment, a proof of princ…
Based on current CERN infrastructure, an electron-proton collider is proposed at a centre-of-mass energy of about 9 TeV. A 7 TeV LHC bunch is used as the proton driver to create a plasma wakefield which then accelerates electrons to 3 TeV, these then colliding with the other 7 TeV LHC proton beam. The basic parameters of the collider are presented, which although of very high energy, has integrated luminosities of the order of 1 pb$^{-1}$/year. For such a collider, with a centre-of-mass energy 30 times greater than HERA, parton momentum fractions, $x$, down to about $10^{-8}$ are accessible fo…
Gamma-proton collisions allow unprecedented investigations of the low x and high $Q^{2}$ regions in quantum chromodynamics. In this paper, we investigate the luminosity for "ILC"$\times$LHC ($\sqrt{s_{ep}}=1.3$ TeV) and "CLIC"$\times$LHC ($\sqrt{s_{ep}}=1.45$ TeV) based $γp$ colliders. Also we determine the laser properties required for high conversion efficiency.
A Super Proton-Proton Collider (SPPC) that aims to explore new physics beyond the standard model will be built in China. Here we focus on the impact of beam-beam interactions in the SPPC. Simulations show that with the current optics and nominal tunes, the dynamic aperture (DA) with all the beam-beam interactions is less than 6σ, the dominant cause being the long-range interactions. First, we show the results of a tune scan done to maximize the DA. Next, we discuss the compensation of the long-range interactions by increasing the crossing angle and also by using current carrying wires.
The possibility of using plasma wakefield acceleration to build a very high energy electron-proton (VHEeP) collider at a centre-of-mass energy of 9 TeV was presented at the DIS2015 workshop. In this talk, the physics case was further developed and the idea has since been published as a journal paper. A brief summary is here given along with some details of the technical aspects not covered in the paper, which focused on the physics motivation. It is demonstrated that an $ep$ collider with a centre-of-mass energy a factor of 30 above HERA has sensitivity to new physical phenomena.
The possibility of a very high energy electron-proton (VHEeP) collider with a centre-of-mass energy of 9 TeV has been presented at previous workshops. These proceedings briefly summarise the VHEeP concept, which was recently published, and developments since then, as well as future directions. At the VHEeP collider, with a centre-of-mass energy 30 times greater than HERA, parton momentum fractions, $x$, down to about $10^{-8}$ are accessible for photon virtualities, $Q^2$, of 1 GeV$^2$. This extension in the kinematic range to low $x$ complements proposals for other electron-proton or electron…
The hadron collider studied in the Future Circular Collider (FCC) project could operate with protons and lead ions in similar operation modes as the LHC. In this paper the potential performances in lead-lead, proton-lead and proton-proton collisions are investigated. Based on average lattice parameters, the strengths of intra-beam scattering and radiation damping are evaluated and their effect on the beam and luminosity evolution is presented. Estimates for the integrated luminosity per fill and per run are given, depending on the turnaround time. Moreover, the beam-beam tune shift and bound f…
The Supper Proton-Proton Collider is a next-generation hadron collider that is now being designed. A baseline design aims for a peak luminosity of about 1*10^35 cm^-2 s^-1. The focus of this article is the effect of beam-beam interactions which are expected to strongly influence stability in the beams. We start with a discussion of a scheme to generate the crossing angles at the interaction points while also correcting the dispersion thus created. The optics constraints on the achievable \b{eta}* were studied. Weak-strong simulations were performed to study single particle dynamics via tune fo…
We present the strategy which has been used recently to optimize integrated luminosity at the Fermilab Tevatron proton-antiproton collider. We use a relatively simple model where we keep the proton intensity fixed, use parameters from fits to the luminosity decay of recent stores as a function of initial antiproton intensity (stash size), and vary the stash size to optimize the integrated luminosity per week. The model assumes a fixed rate of antiproton production, that a store is terminated as soon as the target stash size for the next store is reached, and that the only downtime is due to st…
Two possible options of polarized proton-antiproton collider at the future HESR storage ring are considered. It is shown that the modifications of the present HESR project which are needed to arrange for the polarized proton-antiproton collisions are relatively moderate. An achievable luminosity of 5x10^31 cm^-2 sec^-1 will provide a possibility to carry out experiments in the CM energy range 10-30 GeV, a particularly interesting option for Drell-Yan physics.
Construction of future electron-positron colliders (or dedicated electron linac) and muon colliders (or dedicated muon ring) tangential to Future Circular Collider (FCC) will give opportunity to utilize highest energy proton and nucleus beams for lepton-hadron and photon-hadron collisions. Luminosity values of FCC based ep, \mup, eA, \muA, \gammap and \gammaA colliders are estimated. Multi-TeV center of mass energy ep colliders based on the FCC and linear colliders (LC) are considered in detail. Parameters of upgraded versions of the FCC proton beam are determined to optimize luminosity of ele…
The long-term prospect of building a hadron collider around the circumference of a great circle of the Moon is sketched. A Circular Collider on the Moon (CCM) of $\sim$11000 km in circumference could reach a proton-proton center-of-mass collision energy of 14 PeV -- a thousand times higher than the Large Hadron Collider at CERN -- optimistically assuming a dipole magnetic field of 20 T. Several aspects of such a project are presented, including siting, construction, availability of necessary materials on the Moon, and powering, as well as a discussion of future studies and further information …
Options for future $lepton-proton,lepton-nucleus,γ-proton,γ-nucleus$ and FEL$γ-nucleus$ colliders are discussed. In the spirit of this content, we consider TESLAxHERA, LEPxLHC, $μ$xTEVATRON, exRHIC, LinacxLHC, $\sqrt{s}=3TeV$ $μp$ and CLIC based colliders.
In view of the implementation of beam-monitoring sensors for CERN's Large Hadron Collider (LHC), and also in order to validate Thermoluminescence Detectors as a versatile tool to measure ionizing radiation doses in mixed fields at hadron colliders such as the LHC, chemical vapor deposition diamond sensors have been evaluated and calibrated at CERN's Proton Synchrotron accelerator. Special attention was paid to understanding whether lithiumfluoride thermoluminescence detectors are suitable as measuring devices in these radiation fields.
In this paper, the feasibility of the electron-positron collider based on plasma accelerator is proved by simulation experiments. Starting from the 17.612cm proton beam provided by SPS (super proton synchrotron), the simulation shows that the long proton beam can form several high quality proton bunches through seeded self-modulation in the first half of the long proton beam in a uniform plasma. Then we use these high-quality bunches to excite the wakefield in a uniform plasma and accelerate witness positrons and witness electrons. The simulation results show that the average energy of witness…
Cross section data from the HARP experiment for pion production by protons from a tantalum target have been convoluted with the acceptance of the front-end channel for the proposed neutrino factory or muon collider and integrated over the full phase space measured by HARP, to determine the beam-energy dependence of the muon yield. This permits a determination of the optimal beam energy for the proton driver for these projects. The cross section data are corrected for the beam-energy dependent amplification due to the development of hadronic showers in a thick target. The conclusion is that, fo…
We present the results of numerical simulations and experimental studies about the effects of resonant and random excitations on proton losses, emittances, and beam distributions in the Large Hadron Collider (LHC). In addition to shedding light on complex nonlinear effects, these studies are applied to the design of hollow electron lenses (HEL) for active beam halo control. In the High-Luminosity Large Hadron Collider (HL-LHC), a considerable amount of energy will be stored in the beam tails. To control and clean the beam halo, the installation of two hollow electron lenses, one per beam, is b…
Muon cooling is the main technological obstacle in the building of a muon collider. A muon cooling scheme based on Frictional Cooling holds promise in overcoming this obstacle. An experiment designed to demonstrate the Frictional Cooling concept using protons was undertaken. Although the results were inconclusive in the observation of cooling, the data allowed for the qualification of detailed simulations which are used to simulate the performance of a muon collider.
