arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 1601.00255math.OC
收藏

广域阻尼控制中的事件触发通信:一种基于有限输出反馈的方法

Event-triggered Communication in Wide-area Damping Control: A Limited Output Feedback Based Approach

Mahendra Bhadu, Niladri Sekhar Tripathy, I. N. Kar, Nilanjan Senroy

摘要:

提出了一种基于事件触发的电力系统广域阻尼控制器的概念设计方法。采用事件触发机制,减少了远程信号源与广域阻尼控制器(WADC)位置之间的通信负担。仅当满足基于预定义系统输出的事件触发条件时,才将远程信号传输到WADC。触发条件从稳定性标准中导出,并由位于远程信号源处的单独事件监视单元连续监视。所得到的闭环系统的稳定性是通过输入状态稳定性(ISS)技术保证。本文提出的事件触发WADC(ET-WADC)在两个典型的测试电源系统--两区四机和IEEE 39总线10机上实现。在MATLAB/Simulink平台上进行了非线性仿真研究,验证了所提出的机构的有效性。数值结果表明,控制器在管理通信信道的使用,而不损害所述系统的稳定性目标的功效。

英文摘要:

A conceptual design methodology is proposed for event-triggered based power system wide area damping controller. The event-triggering mechanism is adopted to reduce the communication burden between origin of the remote signal and the wide area damping controller (WADC) location. The remote signal is transmitted to the WADC only when an event-triggering condition based on a predefined system output, is satisfied. The triggering condition is derived from a stability criterion, and is monitored continuously by a separate event-monitoring unit located at the origin of the remote signal. The stability of the resulting closed loop system is guaranteed via the input-to-state stability (ISS) technique. The proposed event triggered WADC (ET-WADC) is implemented on two typical test power systems - two area four machine and IEEE 39 bus 10 machine. The validation of proposed mechanism is carried out through non-linear simulation studies on MATLAB/Simulink platform. The numerical results show the efficacy of the controller in managing the communication channel usage without compromising the stated system stability objectives.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑