We solve the two-dimensional magnetohydrodynamic (MHD) equations of black hole accretion with the presence of magnetic field. The field includes a turbulent component, whose role is represented by the viscosity, and a large-scale ordered component. The latter is further assumed to be evenly symmetric with the equatorial plane. The equations are solved in the $r-θ$ plane of a spherical coordinate by assuming time-steady and radially self-similar. An inflow-wind solution is found. Around the equatorial plane, the gas is inflowing; while above and below the equatorial plane at a certain critical $θ$ angle, $θ\sim 47^{\circ}$, the inflow changes its direction of radial motion and becomes wind. The driving forces are analyzed and found to be the centrifugal force and the gradient of gas and magnetic pressure. The properties of wind are also calculated. The specific angular momentum of wind is found to be significantly larger than that of inflow, thus wind can transfer angular momentum outward. These analytical results are compared to those obtained by the trajectory analysis based on MHD numerical simulation data and good agreements are found.
Fast inflowing ionized absorber tracing the gas dynamics at sub-parsec scale around Mrk 3
Shanghai Astronomical Observatory, Chinese Academy of Science(中国科学院上海天文台);European Space Agency (ESA), European Space Research and Technology Centre (ESTEC)(欧洲空间局(ESA)欧洲空间研究与技术中心(ESTEC));School of Astronomy and Space Science, Nanjing University(南京大学天文与空间科学学院);Key Laboratory of Modern Astronomy and Astrophysics, Nanjing University, Ministry of Education(教育部现代天文与天体物理学的重点实验室,南京大学)
Low-redshift absorption in the Seyfert galaxy PG 1211+143 -- a distant inflow maintaining off-plane accretion or the gravitational redshift of matter orbiting the SMBH?
Numerical Simulation of Hot Accretion Flow around Bondi Radius
以前的数值模拟表明,在黑洞周围的热吸积流中可以产生强风。大多数研究只关注靠近中心黑洞的区域,因此还不清楚风的产生是否在邦迪半径附近的大半径处停止。Bu et al. 2016研究了在核恒星引力存在下邦迪半径周围的热吸积流。他们发现,当核恒星的引力很重要/与黑洞的引力相当时,在邦迪半径周围就不能产生风。然而,对于某些星系,核恒星在邦迪半径附近的引力可能并不强。在这种情况下,是否能在邦迪半径周围产生风还不清楚。通过流体动力学模拟,研究了有无热传导时Bondi半径附近的热吸积流。我们使用虚拟粒子轨道方法来研究是否存在风的模拟数据的基础上。数值结果表明,在没有核恒星引力的情况下,在Bondi半径附近可以产生风,从而导致质量流入率向内减小。我们证实了Yuan等人的结果,这表明这是由于气体通过风而不是对流运动的质量损失。
Rotating Accretion Flows: From Infinity to the Black Hole
旋转入流在超大质量黑洞上的吸积是一个特别难研究的问题,因为它涉及的长度尺度范围很广。吸积流的全局性质的分析和数值处理已被广泛利用,但需要详细的数值模拟来解决某些关键问题。我们使用ZEUS代码运行流体动力学模拟旋转,轴对称吸积流与韧致辐射冷却,考虑解决方案的离心平衡半径显着超过史瓦西半径,有和没有粘性角动量输运。从远离邦迪半径的地方一直到黑洞附近,都有气体进入。我们得到了关于单参数Mdot_Bondi/Mdot_Edd的连续解,并且在Mdot_Bondi/Mdot_Edd ~ few x 10^(-2)的爱丁顿比处,两类一般解之间存在急剧的过渡。我们的高流入解与标准的Shakura & Sunyaev(1973)结果非常相似。但我们的低流入结果是零阶的平稳Papaloizou和Pringle(1984)的解决方案,它没有吸积。在小的假设粘性下,它们显示出环流,圆盘和圆锥形的风流出几乎与流入平衡。这些解决方案的特点是热,垂直延伸的磁盘,和净吸积收益率极低,只有秩序α倍的流入率。我们的模拟收敛的空间分辨率和时间持续时间,他们并不强烈依赖于我们选择的边界条件。
Cosmological simulations of quasar fueling to sub-parsec scales using Lagrangian hyper-refinement
我们提出了一个类星体质量晕($M_{\rm halo} \approx 10^{12.5}\,{\rm M}_{\odot}$在z=2)的宇宙学流体动力学模拟,第一次解决气体运输到内部0.1 pc周围的中央大质量黑洞。我们模拟了一个多相的星际介质,包括恒星反馈的超新星,恒星风和辐射,和超拉格朗日细化技术,增加动态接近黑洞的分辨率。我们不包括黑洞反馈。我们发现,在核气体密度峰值时期(z~2),亚pc的流入速率(1)在稳定状态下可以达到约6 M $_{\odot}$ yr $^{-1}$,足以为发光类星体提供动力,(2)在类星体前阶段是高度时变的,在Myr时间尺度上跨越0.001-10 M $_{\odot}$ yr $^{-1}$,(3)由于热中心空洞的形成,在较低的核气体密度和较晚的时间(z~1),活动期(0.01-0.1 M $_{\odot}$ yr $^{-1}$)较短(~ 200万年),随后是较长的不活动期。流入的气体主要是冷的,旋转支撑在湍流和热压中占主导地位,恒星形成可以消耗1 pc - 10 kpc的流入气体。来自多尺度恒星非轴对称的引力矩主导了气体自扭转和压力梯度的角动量输运,吸积弱依赖于黑洞质量。次pc流入率与核(但与全球)恒星形成相关,可以超过爱丁顿率x10。这个黑洞可以在大约100万年的时间里从星系中心移动大约10 pc。吸积气体形成pc尺度的、旋转支撑的、模…