We propose a method for variable selection in multiple regression with random predictors. This method is based on a criterion that permits to reduce the variable selection problem to a problem of estimating suitable permutation and dimensionality. Then, estimators for these parameters are proposed and the resulting method for selecting variables is shown to be consistent. A simulation study that permits to gain understanding of the performances of the proposed approach and to compare it with an existing method is given.
We consider a finite mixture of Gaussian regression model for high- dimensional data, where the number of covariates may be much larger than the sample size. We propose to estimate the unknown conditional mixture density by a maximum likelihood estimator, restricted on relevant variables selected by an 1-penalized maximum likelihood estimator. We get an oracle inequality satisfied by this estimator with a Jensen-Kullback-Leibler type loss. Our oracle inequality is deduced from a general model selection theorem for maximum likelihood estimators with a random model collection. We can derive the …
We study a dimensionality reduction technique for finite mixtures of high-dimensional multivariate response regression models. Both the dimension of the response and the number of predictors are allowed to exceed the sample size. We consider predictor selection and rank reduction to obtain lower-dimensional approximations. A class of estimators with a fast rate of convergence is introduced. We apply this result to a specific procedure, introduced in [11], where the relevant predictors are selected by the Group-Lasso.
We address the issue of variable selection in the regression model with very high ambient dimension, i.e., when the number of covariates is very large. The main focus is on the situation where the number of relevant covariates, called intrinsic dimension, is much smaller than the ambient dimension. Without assuming any parametric form of the underlying regression function, we get tight conditions making it possible to consistently estimate the set of relevant variables. These conditions relate the intrinsic dimension to the ambient dimension and to the sample size. The procedure that is provab…
We consider regression problems where the number of predictors greatly exceeds the number of observations. We propose a method for variable selection that first estimates the regression function, yielding a "pre-conditioned" response variable. The primary method used for this initial regression is supervised principal components. Then we apply a standard procedure such as forward stepwise selection or the LASSO to the pre-conditioned response variable. In a number of simulated and real data examples, this two-step procedure outperforms forward stepwise selection or the usual LASSO (applied dir…
The dual problem of testing the predictive significance of a particular covariate, and identification of the set of relevant covariates is common in applied research and methodological investigations. To study this problem in the context of functional linear regression models with predictor variables observed over a grid and a scalar response, we consider basis expansions of the functional covariates and apply the likelihood ratio test. Based on p-values from testing each predictor, we propose a new variable selection method, which is consistent in selecting the relevant predictors from set of…
In regression problems where covariates can be naturally grouped, the group Lasso is an attractive method for variable selection since it respects the grouping structure in the data. We study the selection and estimation properties of the group Lasso in high-dimensional settings when the number of groups exceeds the sample size. We provide sufficient conditions under which the group Lasso selects a model whose dimension is comparable with the underlying model with high probability and is estimation consistent. However, the group Lasso is, in general, not selection consistent and also tends to …
Gaussian graphical models (GGMs) are well-established tools for probabilistic exploration of dependence structures using precision matrices. We develop a Bayesian method to incorporate covariate information in this GGMs setup in a nonlinear seemingly unrelated regression framework. We propose a joint predictor and graph selection model and develop an efficient collapsed Gibbs sampler algorithm to search the joint model space. Furthermore, we investigate its theoretical variable selection properties. We demonstrate our method on a variety of simulated data, concluding with a real data set from …
We propose a method for incorporating variable selection into local polynomial regression. This can improve the accuracy of the regression by extending the bandwidth in directions corresponding to those variables judged to be are unimportant. It also increases our understanding of the dataset by highlighting areas where these variables are redundant. The approach has the potential to effect complete variable removal as well as perform partial removal when a variable redundancy applies only to particular regions of the data. We define a nonparametric oracle property and show that this is more t…
This paper studies macroeconomic forecasting and variable selection using a folded-concave penalized regression with a very large number of predictors. The penalized regression approach leads to sparse estimates of the regression coefficients, and is applicable even if the dimensionality of the model is much larger than the sample size. The first half of the paper discusses the theoretical aspects of a folded-concave penalized regression when the model exhibits time series dependence. Specifically, we show the oracle inequality and the oracle property for ultrahigh-dimensional time-dependent r…
Quadratic regression (QR) models naturally extend linear models by considering interaction effects between the covariates. To conduct model selection in QR, it is important to maintain the hierarchical model structure between main effects and interaction effects. Existing regularization methods generally achieve this goal by solving complex optimization problems, which usually demands high computational cost and hence are not feasible for high dimensional data. This paper focuses on scalable regularization methods for model selection in high dimensional QR. We first consider two-stage regulari…
We develop a Bayesian methodology aimed at simultaneously estimating low-rank and row-sparse matrices in a high-dimensional multiple-response linear regression model. We consider a carefully devised shrinkage prior on the matrix of regression coefficients which obviates the need to specify a prior on the rank, and shrinks the regression matrix towards low-rank and row-sparse structures. We provide theoretical support to the proposed methodology by proving minimax optimality of the posterior mean under the prediction risk in ultra-high dimensional settings where the number of predictors can gro…
In this article we investigate consistency of selection in regression models via the popular Lasso method. Here we depart from the traditional linear regression assumption and consider approximations of the regression function $f$ with elements of a given dictionary of $M$ functions. The target for consistency is the index set of those functions from this dictionary that realize the most parsimonious approximation to $f$ among all linear combinations belonging to an $L_2$ ball centered at $f$ and of radius $r_{n,M}^2$. In this framework we show that a consistent estimate of this index set can …
In this paper, we propose methods for functional predictor selection and the estimation of smooth functional coefficients simultaneously in a scalar-on-function regression problem under high-dimensional multivariate functional data setting. In particular, we develop two methods for functional group-sparse regression under a generic Hilbert space of infinite dimension. We show the convergence of algorithms and the consistency of the estimation and the selection (oracle property) under infinite-dimensional Hilbert spaces. Simulation studies show the effectiveness of the methods in both the selec…
The use of prior information in the linear regression is well known to provide more efficient estimators of regression coefficients. The methods of non-stochastic restricted regression estimation proposed by Theil and Goldberger (1961) are preferred when prior information is available. In this study, we will consider parameter estimation and the variable selection in non-stochastic restricted linear regression model, using least absolute shrinkage and selection operator (LASSO) method introduced by Tibshirani (1996). A small simulation study and real data example are provided to illustrate the…
In this article, we introduce a new variable selection technique through trimming for finite mixture of regression models. Compared to the traditional variable selection techniques, the new method is robust and not sensitive to outliers. The estimation algorithm is introduced and numerical studies are conducted to examine the finite sample performance of the proposed procedure and to compare it with other existing methods.
Parameter estimation and the variable selection are two pioneer issues in regression analysis. While traditional variable selection methods require prior estimation of the model parameters, the penalized methods simultaneously carry on parameter estimation and variable select. Therefore, penalized variable selection methods are of great interest and have been extensively studied in literature. However, most of the papers in literature are only limited to the regression models with uncorrelated error terms and normality assumption. In this study, we combine the parameter estimation and the vari…
This paper considers linear model selection when the response is vector-valued and the predictors are randomly observed. We propose a new approach that decouples statistical inference from the selection step in a "post-inference model summarization" strategy. We study the impact of predictor uncertainty on the model selection procedure. The method is demonstrated through an application to asset pricing.
Sparse regression is frequently employed in diverse scientific settings as a feature selection method. A pervasive aspect of scientific data that hampers both feature selection and estimation is the presence of strong correlations between predictive features. These fundamental issues are often not appreciated by practitioners, and jeapordize conclusions drawn from estimated models. On the other hand, theoretical results on sparsity-inducing regularized regression such as the Lasso have largely addressed conditions for selection consistency via asymptotics, and disregard the problem of model se…
Multi-parameter regression (MPR) modelling refers to the approach whereby covariates are allowed to enter the model through multiple distributional parameters simultaneously. This is in contrast to the standard approaches where covariates enter through a single parameter (e.g., a location parameter). Penalized variable selection has received a significant amount of attention in recent years: methods such as the least absolute shrinkage and selection operator (LASSO), smoothly clipped absolute deviation (SCAD), and adaptive LASSO are used to simultaneously select variables and estimate their re…
In this work we discuss a novel model prior probability for variable selection in linear regression. The idea is to determine the prior mass in an objective sense, by considering the worth of each of the possible regression models, given the number of covariates under consideration. Through a simulation study, we show that the proposed prior outperforms the uniform prior and the Scott \& Berger prior in a scenario of no prior knowledge about the size of the true regression models. We illustrate the use of the prior using two well-known data sets with, respectively, 15 and 4 covariates.
Bayesian variable selection is a powerful tool for data analysis, as it offers a principled method for variable selection that accounts for prior information and uncertainty. However, wider adoption of Bayesian variable selection has been hampered by computational challenges, especially in difficult regimes with a large number of covariates or non-conjugate likelihoods. Generalized linear models for count data, which are prevalent in biology, ecology, economics, and beyond, represent an important special case. Here we introduce an efficient MCMC scheme for variable selection in binomial and ne…
Doubly truncated data arise in many areas such as astronomy, econometrics, and medical studies. For the regression analysis with doubly truncated response variables, the existence of double truncation may bring bias for estimation as well as affect variable selection. We propose a simultaneous estimation and variable selection procedure for the doubly truncated regression, allowing a diverging number of regression parameters. To remove the bias introduced by the double truncation, a Mann-Whitney-type loss function is used. The adaptive LASSO penalty is then added into the loss function to achi…
Modern variable selection procedures make use of penalization methods to execute simultaneous model selection and estimation. A popular method is the LASSO (least absolute shrinkage and selection operator), the use of which requires selecting the value of a tuning parameter. This parameter is typically tuned by minimizing the cross-validation error or Bayesian information criterion (BIC) but this can be computationally intensive as it involves fitting an array of different models and selecting the best one. In contrast with this standard approach, we have developed a procedure based on the so-…
We propose discrete determinantal point processes (DPPs) for priors on the model parameter in Bayesian variable selection. By our variable selection method, collinear predictors are less likely to be selected simultaneously because of the repulsion property of discrete DPPs. Three types of DPP priors are proposed. We show the efficiency of the proposed priors through numerical experiments and applications to collinear datasets.
Variable selection is an important statistical problem. This problem becomes more challenging when the candidate predictors are of mixed type (e.g. continuous and binary) and impact the response variable in nonlinear and/or non-additive ways. In this paper, we review existing variable selection approaches for the Bayesian additive regression trees (BART) model, a nonparametric regression model, which is flexible enough to capture the interactions between predictors and nonlinear relationships with the response. An emphasis of this review is on the capability of identifying relevant predictors.…
We consider the problem of variable selection in regression models. In particular, we are interested in selecting explanatory covariates linked with the response variable and we want to determine which covariates are relevant, that is which covariates are involved in the model. In this framework, we deal with L1-penalised regression models. To handle the choice of the penalty parameter to perform variable selection, we develop a new method based on the knockoffs idea. This revisited knockoffs method is general, suitable for a wide range of regressions with various types of response variables. …
Xi’an Jiaotong University（西安交通大学）；State Key Laboratory of Management and Control for Complex Systems（复杂系统管理与控制国家重点实验室）
Given $m$ $d$-dimensional responsors and $n$ $d$-dimensional predictors, sparse regression finds at most $k$ predictors for each responsor for linear approximation, $1\leq k \leq d-1$. The key problem in sparse regression is subset selection, which usually suffers from high computational cost. Recent years, many improved approximate methods of subset selection have been published. However, less attention has been paid on the non-approximate method of subset selection, which is very necessary for many questions in data analysis. Here we consider sparse regression from the view of correlation, a…
In the high-dimensional regression model a response variable is linearly related to $p$ covariates, but the sample size $n$ is smaller than $p$. We assume that only a small subset of covariates is `active' (i.e., the corresponding coefficients are non-zero), and consider the model-selection problem of identifying the active covariates. A popular approach is to estimate the regression coefficients through the Lasso ($\ell_1$-regularized least squares). This is known to correctly identify the active set only if the irrelevant covariates are roughly orthogonal to the relevant ones, as quantified …
We propose a novel method for variable selection in functional linear concurrent regression. Our research is motivated by a fisheries footprint study where the goal is to identify important time-varying socio-structural drivers influencing patterns of seafood consumption, and hence fisheries footprint, over time, as well as estimating their dynamic effects. We develop a variable selection method in functional linear concurrent regression extending the classically used scalar on scalar variable selection methods like LASSO, SCAD, and MCP. We show in functional linear concurrent regression the v…
We propose a robust variable selection procedure using a divergence based M-estimator combined with a penalty function. It produces robust estimates of the regression parameters and simultaneously selects the important explanatory variables. An efficient algorithm based on the quadratic approximation of the estimating equation is constructed. The asymptotic distribution and the influence function of the regression coefficients are derived. The widely used model selection procedures based on the Mallows's $C_p$ statistic and Akaike information criterion (AIC) often show very poor performance in…
Similar to variable selection in the linear regression model, selecting significant components in the popular additive regression model is of great interest. However, such components are unknown smooth functions of independent variables, which are unobservable. As such, some approximation is needed. In this paper, we suggest a combination of penalized regression spline approximation and group variable selection, called the lasso-type spline method (LSM), to handle this component selection problem with a diverging number of strongly correlated variables in each group. It is shown that the propo…
School of Statistics, University of Minnesota（明尼苏达大学统计学院）
Penalized (or regularized) regression, as represented by Lasso and its variants, has become a standard technique for analyzing high-dimensional data when the number of variables substantially exceeds the sample size. The performance of penalized regression relies crucially on the choice of the tuning parameter, which determines the amount of regularization and hence the sparsity level of the fitted model. The optimal choice of tuning parameter depends on both the structure of the design matrix and the unknown random error distribution (variance, tail behavior, etc). This article reviews the cu…
Lasso and other regularization procedures are attractive methods for variable selection, subject to a proper choice of shrinkage parameter. Given a set of potential subsets produced by a regularization algorithm, a consistent model selection criterion is proposed to select the best one among this preselected set. The approach leads to a fast and efficient procedure for variable selection, especially in high-dimensional settings. Model selection consistency of the suggested criterion is proven when the number of covariates d is fixed. Simulation studies suggest that the criterion still enjoys m…
Nonlinear kernel regression models are often used in statistics and machine learning because they are more accurate than linear models. Variable selection for kernel regression models is a challenge partly because, unlike the linear regression setting, there is no clear concept of an effect size for regression coefficients. In this paper, we propose a novel framework that provides an effect size analog of each explanatory variable for Bayesian kernel regression models when the kernel is shift-invariant --- for example, the Gaussian kernel. We use function analytic properties of shift-invariant…
We address the problem of multicollinearity in a function-on-scalar regression model by using a prior which simultaneously selects, clusters, and smooths functional effects. Our methodology groups effects of highly correlated predictors, performing dimension reduction without dropping relevant predictors from the model. We validate our approach via a simulation study, showing superior performance relative to existing dimension reduction approaches in the function-on-scalar literature. We also demonstrate the use of our model on a data set of age specific fertility rates from the United Nations…
This paper considers the problem of variable selection in regression models in the case of functional variables that may be mixed with other type of variables (scalar, multivariate, directional, etc.). Our proposal begins with a simple null model and sequentially selects a new variable to be incorporated into the model based on the use of distance correlation proposed by \cite{Szekely2007}. For the sake of simplicity, this paper only uses additive models. However, the proposed algorithm may assess the type of contribution (linear, non linear, ...) of each variable. The algorithm has shown quit…
There has been recent interest in extending the ideas of False Discovery Rates (FDR) to variable selection in regression settings. Traditionally the FDR in these settings has been defined in terms of the coefficients of the full regression model. Recent papers have struggled with controlling this quantity when the predictors are correlated. This paper shows that this full model definition of FDR suffers from unintuitive and potentially undesirable behavior in the presence of correlated predictors. We propose a new false selection error criterion, the False Variable Rate (FVR), that avoids thes…
Variable selection is a difficult problem that is particularly challenging in the analysis of high-dimensional genomic data. Here, we introduce the CAR score, a novel and highly effective criterion for variable ranking in linear regression based on Mahalanobis-decorrelation of the explanatory variables. The CAR score provides a canonical ordering that encourages grouping of correlated predictors and down-weights antagonistic variables. It decomposes the proportion of variance explained and it is an intermediate between marginal correlation and the standardized regression coefficient. As a popu…
We propose Stepwise cOnditional likelihood variable selection for Discriminant Analysis (SODA) to detect both main and quadratic interaction effects in logistic regression and quadratic discriminant analysis (QDA) models. In the forward stage, SODA adds in important predictors evaluated based on their overall contributions, whereas in the backward stage SODA removes unimportant terms so as to optimize the extended Bayesian Information Criterion (EBIC). Compared with existing methods on QDA variable selections, SODA can deal with high-dimensional data with the number of predictors much larger t…
It is known that the estimating equations for quantile regression (QR) can be solved using an EM algorithm in which the M-step is computed via weighted least squares, with weights computed at the E-step as the expectation of independent generalized inverse-Gaussian variables. This fact is exploited here to extend QR to allow for random effects in the linear predictor. Convergence of the algorithm in this setting is established by showing that it is a generalized alternating minimization (GAM) procedure. Another modification of the EM algorithm also allows us to adapt a recently proposed method…
Variable selection is recognized as one of the most critical steps in statistical modeling. The problems encountered in engineering and social sciences are commonly characterized by over-abundance of explanatory variables, non-linearities and unknown interdependencies between the regressors. An added difficulty is that the analysts may have little or no prior knowledge on the relative importance of the variables. To provide a robust method for model selection, this paper introduces the Multi-objective Genetic Algorithm for Variable Selection (MOGA-VS) that provides the user with an optimal set…
The selection of essential variables in logistic regression is vital because of its extensive use in medical studies, finance, economics and related fields. In this paper, we explore four main typologies (test-based, penalty-based, screening-based, and tree-based) of frequentist variable selection methods in logistic regression setup. Primary objective of this work is to give a comprehensive overview of the existing literature for practitioners. Underlying assumptions and theory, along with the specifics of their implementations, are detailed as well. Next, we conduct a thorough simulation stu…
We propose a new model selection criterion for mixed effects regression models that is computable when the model is fitted with a two-step method, even when the structure and the distribution of the random effects are unknown. The criterion is especially useful in the early stage of the model building process when one needs to decide which covariates should be included in a mixed effects regression model but has no knowledge of the random effect structure. This is particularly relevant in substantive fields where variable selection is guided by information criteria rather than regularization. …
Sparsity-inducing penalties are useful tools for variable selection and they are also effective for regression settings where the data are functions. We consider the problem of selecting not only variables but also decision boundaries in logistic regression models for functional data, using the sparse regularization. The functional logistic regression model is estimated by the framework of the penalized likelihood method with the sparse group lasso-type penalty, and then tuning parameters are selected using the model selection criterion. The effectiveness of the proposed method is investigated…
Variable selection problem for the nonlinear Cox regression model is considered. In survival analysis, one main objective is to identify the covariates that are associated with the risk of experiencing the event of interest. The Cox proportional hazard model is being used extensively in survival analysis in studying the relationship between survival times and covariates, where the model assumes that the covariate has a log-linear effect on the hazard function. However, this linearity assumption may not be satisfied in practice. In order to extract a representative subset of features, various v…
A mathematical model for variable selection in functional regression models with scalar response is proposed. By "variable selection" we mean a procedure to replace the whole trajectories of the functional explanatory variables with their values at a finite number of carefully selected instants (or "impact points"). The basic idea of our approach is to use the Reproducing Kernel Hilbert Space (RKHS) associated with the underlying process, instead of the more usual L2[0,1] space, in the definition of the linear model. This turns out to be especially suitable for variable selection purposes, sin…
To estimate a sparse linear model from data with Gaussian noise, consilience from lasso and compressed sensing literatures is that thresholding estimators like lasso and the Dantzig selector have the ability in some situations to identify with high probability part of the significant covariates asymptotically, and are numerically tractable thanks to convexity. Yet, the selection of a threshold parameter $λ$ remains crucial in practice. To that aim we propose Quantile Universal Thresholding, a selection of $λ$ at the detection edge. We show with extensive simulations and real data that an excel…
In this paper, we introduce a new methodology for Bayesian variable selection in linear regression that is independent of the traditional indicator method. A diagonal matrix $\mathbf{G}$ is introduced to the prior of the coefficient vector $\boldsymbolβ$, with each of the $g_j$'s, bounded between $0$ and $1$, on the diagonal serves as a stabilizer of the corresponding $β_j$. Mathematically, a promising variable has a $g_j$ value that is close to $0$, whereas the value of $g_j$ corresponding to an unpromising variable is close to $1$. This property is proven in this paper under orthogonality to…
The sophisticated and automated means of data collection used by an increasing number of institutions and companies leads to extremely large data sets. Subset selection in regression is essential when a huge number of covariates can potentially explain a response variable of interest. The recent statistical literature has seen an emergence of new selection methods that provide some type of compromise between implementation (computational speed) and statistical optimality (e.g., prediction error minimization). Global methods such as Mallows' $C_p$ have been supplanted by sequential methods such…
Testing-driven Variable Selection in Bayesian Modal Regression
Department of Statistics, University of South Carolina（南卡罗来纳大学统计学系）；Division of Epidemiology, Biostatistics, and Environmental Health Sciences, School of Public Health, University of Memphis（孟菲斯大学公共卫生学院流行病学与生物统计学系）
