arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 1408.4176physics.flu-dyn
收藏

行波热声热机的线性和非线性建模

Linear and Nonlinear Modeling of a Traveling-Wave Thermoacoustic Heat Engine

Carlo Scalo, Sanjiva K. Lele, Lambertus Hesselink

摘要:

本文对一种行波热声热机(TAE)进行了从静态到极限环的三维Navier-Stokes数值模拟。TAE由一个长的变面积谐振腔和一个较小的环形管组成,环形管中包括热(HHX)和环境(AHX)换热器以及回热器(REG)。模拟是壁解析的,在所有边界处强制执行无滑移和绝热条件,而由于REG和HX的传热和阻力被建模。HHX温度在440 - 500 K范围内进行了研究,AHX温度固定在300 K。声能的初始指数增长是由于行波网络通过在施加的温度梯度的方向上围绕REG/HX单元循环而放大。一个简单的分析模型表明,这种热声不稳定性是一个拉格朗日热力学过程类似斯特林循环。一个系统范围内的线性稳定性模型的基础上罗特的理论是能够准确地预测的频率和增长率,表现出符合超临界Hopf分岔的属性。极限环由声流控制--一种由高振幅声学产生的整流流。它的主要特点是解释与轴对称不可压缩模型驱动的波诱导应力提取的可压缩计算。这些功能包括Gedeon流和平均再循环由于流动分离。第一个驱动热流体从HHX到热缓冲管(TBT)中的次级换热器(AHX 2)的平均平流,这是实现声能增长饱和所必需的。的能量通量的直接评估表明,该设备的效率恶化的驱动比和TBT中的声功率主要是平衡的平均平流和热声热传输。

英文摘要:

We have carried out three-dimensional Navier-Stokes simulations, from quiescent conditions to the limit cycle, of a traveling-wave thermoacoustic heat engine (TAE) composed of a long variable-area resonator shrouding a smaller annular tube, which encloses the hot (HHX) and ambient (AHX) heat-exchangers, and the regenerator (REG). Simulations are wall-resolved, with no-slip and adiabatic conditions enforced at all boundaries, while the heat transfer and drag due to the REG and HXs are modeled. HHX temperatures have been investigated in the range 440K - 500K with AHX temperature fixed at 300K. The initial exponential growth of acoustic energy is due to a network of traveling waves amplified by looping around the REG/HX unit in the direction of the imposed temperature gradient. A simple analytical model demonstrates that such thermoacoustic instability is a Lagrangian thermodynamic process resembling a Stirling cycle. A system-wide linear stability model based on Rott's theory is able to accurately predict the frequency and the growth rate, exhibiting properties consistent with a supercritical Hopf bifurcation. The limit cycle is governed by acoustic streaming -- a rectified flow resulting from high-amplitude acoustics. Its key features are explained with an axially symmetric incompressible model driven by the wave-induced stresses extracted from the compressible calculations. These features include Gedeon streaming and mean recirculations due to flow separation. The first drives the mean advection of hot fluid from the HHX to a secondary heat exchanger (AHX2), in the thermal buffer tube (TBT), necessary to achieve saturation of the acoustic energy growth. The direct evaluation of the energy fluxes reveals that the efficiency of the device deteriorates with the drive ratio and that the acoustic power in the TBT is balanced primarily by the mean advection and thermoacoustic heat transport.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑