arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 1408.2827astro-ph.IM
收藏

SuMIRe/PFS光谱仪系统的现状

Current status of the Spectrograph System for the SuMIRe/PFS

S. Vives, D. Le Mignant, J. E. Gunn, S. Smee, L. Souza de Oliveira, N. Tamura, H. Sugai, R. Barkhouser, A. Bozier, M. A. Carr, A. Cesar de Oliveira, D. Ferrand,… 展开作者

S. Vives, D. Le Mignant, J. E. Gunn, S. Smee, L. Souza de Oliveira, N. Tamura, H. Sugai, R. Barkhouser, A. Bozier, M. A. Carr, A. Cesar de Oliveira, D. Ferrand, M. Golebiowski, M. Hart, S. Hope, M. Jaquet, F. Madec, S. Pascal, T. Pegot-Ogier, M. Vittal de Arruda

摘要:

主焦点摄谱仪(PFS)是斯巴鲁望远镜的新设施仪器,将于2017年左右安装。它是一个多目标光谱仪,由大约2400根光纤馈电,放置在主焦点,覆盖一个对角线为1.35度的六边形视场,能够同时获得波长范围从0.38 μ m到1.26 μ m的光谱数据。光谱仪系统由四个相同的模块组成,每个模块接收来自600根光纤的光。每个模块包含三个通道,分别覆盖波长范围0.38-0.65 μ(“蓝色”)、0.63-0.97 μ(“红色”)和0.94-1.26 μ(“NIR”);分辨能力从蓝色的约2000到红外的约4000相当平稳地发展。一个额外的光谱模式允许达到光谱分辨率5000在0.8 μ(红色)。所提出的光学设计是基于施密特准直器面向三个施密特相机(每个光谱通道一个)。这个架构非常健壮,众所周知,并且有文档记录。它允许仅用几个简单元件(高吞吐量)获得高图像质量,但以中心遮蔽为代价,这导致更大的光学器件。每个模块在设计上都必须是模块化的,以便集成和测试,并安全地运输到望远镜:这是机械设计的主要驱动力。特别是,每个模块将首先在LAM(法国)进行完全集成和验证,然后再运往夏威夷。将在工作台上对所有子组件进行索引,以便准确重新定位。本文将对2014年3月成功通过关键设计评审(CDR)并处于建设阶段的光谱仪系统进行概述。

英文摘要:

The Prime Focus Spectrograph (PFS) is a new facility instrument for Subaru Telescope which will be installed in around 2017. It is a multi-object spectrograph fed by about 2400 fibers placed at the prime focus covering a hexagonal field-of-view with 1.35 deg diagonals and capable of simultaneously obtaining data of spectra with wavelengths ranging from 0.38 um to 1.26 um. The spectrograph system is composed of four identical modules each receiving the light from 600 fibers. Each module incorporates three channels covering the wavelength ranges 0.38-0.65 mu ("Blue"), 0.63-0.97 mu ("Red"), and 0.94-1.26 mu ("NIR") respectively; with resolving power which progresses fairly smoothly from about 2000 in the blue to about 4000 in the infrared. An additional spectral mode allows reaching a spectral resolution of 5000 at 0.8mu (red). The proposed optical design is based on a Schmidt collimator facing three Schmidt cameras (one per spectral channel). This architecture is very robust, well known and documented. It allows for high image quality with only few simple elements (high throughput) at the expense of the central obscuration, which leads to larger optics. Each module has to be modular in its design to allow for integration and tests and for its safe transport up to the telescope: this is the main driver for the mechanical design. In particular, each module will be firstly fully integrated and validated at LAM (France) before it is shipped to Hawaii. All sub-assemblies will be indexed on the bench to allow for their accurate repositioning. This paper will give an overview of the spectrograph system which has successfully passed the Critical Design Review (CDR) in 2014 March and which is now in the construction phase.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑