arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 1307.0671physics.optics
收藏

不同温度和压力下空气的瑞利-布里渊散射剖面

Rayleigh-Brillouin scattering profiles of air at different temperatures and pressures

Ziyu Gu, Benjamin Witschas, Willem van de Water, Wim Ubachs

摘要:

在255至340 K的温度范围和640至3300 mbar的压力范围内记录了空气的瑞利布里渊散射剖面,涵盖了与地球大气层和计划的大气光探测和测距任务有关的条件。在366.8 nm波长下进行的测量检测来自灵敏腔内设置的90度散射角下的自发RB散射,以1% rms噪声水平或更好的水平提供散射轮廓。难以捉摸的传输系数,体积粘度,有效地通过比较测量模型,产生增加的趋势。计算的(Tenti S6)线的形状与实验数据在2%的水平是一致的,满足未来的RB散射激光雷达任务在地球大气中的要求。然而,系统的百分之二的偏差可能意味着该模型有一个限制,以描述RB在空气中散射的最精细的细节。最后,它表明,RB散射数据结合Tenti S6模型可以用来反演实际的气体温度。

英文摘要:

Rayleigh Brillouin (RB) scattering profiles for air have been recorded for the temperature range from 255 to 340 K and the pressure range from 640 to 3300 mbar, covering the conditions relevant for the Earth's atmosphere and for planned atmospheric light detection and ranging (LIDAR) missions. The measurements performed at a wavelength of 366.8 nm detect spontaneous RB scattering at a 90 degree scattering angle from a sensitive intracavity setup, delivering scattering profiles at a 1 percent rms noise level or better. The elusive transport coefficient, the bulk viscosity, is effectively derived by a comparing the measurements to the model, yielding an increased trend. The calculated (Tenti S6) line shapes are consistent with experimental data at the level of 2 percent, meeting the requirements for the future RB scattering LIDAR missions in the Earth's atmosphere. However, the systematic 2 percent deviation may imply that the model has a limit to describe the finest details of RB scattering in air. Finally, it is demonstrated that the RB scattering data in combination with the Tenti S6 model can be used to retrieve the actual gas temperatures.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑