The electronic and magnetic properties of varying width, oxygen-functionalized armchair graphene nanoribbons (AGNRs) are investigated using first-principles density functional theory (DFT). Our study shows that O-passivation results in a rich geometrical environment which in turn determines the electronic and magnetic properties of the AGNR. For planar systems a degenerate magnetic ground state, arising from emptying of O lone-pair electrons, is reported. DFT predicts ribbons with ferromagnetic coupling to be metallic whereas antiferromagnetically coupled ribbons present three band gap families: one metallic and two semiconducting. Unlike hydrogen functionalized AGNRs, the oxygen functionalized ribbons can attain a lower energy configuration by adopting a non-planar geometry. The non-planar structures are non-magnetic and show three semiconducting families of band gap behavior. Quasiparticle corrections to the DFT results predict a widening of the band gaps for all planar and non-planar, semiconducting systems. This suggests that oxygen functionalization could be used to manipulate the electronic structures of AGNRs.
Molybdenum disulfide (MoS2) is layered transition-metal dichalcogenide (TMDC), which in its monolayer form, has the direct bandgap of 1.8 eV. We investigated the effect of width and strain on quantum transport for MoS2 armchair nanoribbons. That indicates MoS2 armchair nanoribbons are a good candidate for transistors even with strain.
Seven types of armchair graphyne nanoribbons are investigated with HSE06 functional. The quantum confinements in the graphyne nanoribbons open or increase the band gaps of the corresponding two-dimensional graphynes, which is crucial to high on/off ratio in electronic device operation. The major carrier mobilities of the graphyne nanoribbons with high percentage of sp hybridized carbon atoms are very large. The sparse linking pattern results in small number of frontier crystal orbitals and small deformation potential constants, which are responsible for the large carrier mobilities. Some graph…
Armchair graphene nanoribbons with different proportions of edge oxygen atoms are investigated by using crystal orbital method based on density functional theory. All the nanoribbons are energetically favorable, although buckled edges are present. Isolated edge oxygen atoms cause semiconductor-metal transition via introducing edge states, while adjacent edge oxygen atoms not. For the graphene nanoribbons with all oxygen atoms on the edges, both band gap and carrier mobility alternate with respect to the ribbon width. The carrier mobilities are as 18%-65% large as those of the graphene nanoribb…
Motivated by the recent successful formation of the MoSi2N4 monolayer [Hong et al., Sci. 369, 670 (2020)], the structural, electronic and magnetic properties of MoSi2N4 nanoribbons (NRs) is investigated for the first time . The band structure calculations showed spin-polarization in zigzag edges and a non-magnetic semiconducting character in armchair edges. For armchair-edges, we identify an indirect to direct band gap shift compared to the MoSi2N4 monolayer, and its energy gap increases with increasing NR width. Anisotropic electrical and magnetic behavior is observed via band structure calcu…
In recent years, bottom-up synthesis procedures have achieved significant advancements in atomically-controlled growth of several-nanometer-long graphene nanoribbons with armchair-shaped edges (AGNRs). This greatly encourages us to explore the potential of such well-defined AGNRs in electronics and spintronics. Here, we propose an AGNR based spin valve architecture that induces a large magnetoresistance up to 900%. We find that, when an AGNR is connected perpendicularly to zigzag-shaped edges, the AGNR allows for long-range extension of the otherwise localized edge state. The huge magnetoresis…
We extensively characterize the electronic structure of ultra-narrow graphene nanoribbons (GNRs) with armchair edges and zig-zag termini that have 5 carbon atoms across their width (5-AGNRs), as synthesised on Au(111). Scanning tunnelling spectroscopy measurements on the ribbons, recorded on both the metallic substrate and a decoupling NaCl layer, show well-defined dispersive bands and in-gap states. In combination with theoretical calculations, we show how these in-gap states are topological in nature and localised at the zig-zag termini of the nanoribbons. Besides rationalising the driving f…
The bottom-up fabrication graphene nanoribbons (GNRs) has opened new opportunities to specifically control their electronic and optical properties by precisely controlling their atomic structure. Here, we address excitations in GNRs with periodic structural wiggles, so-called Chevron GNRs. Based on reflectance difference and high-resolution electron energy loss spectroscopies together with ab-initio simulations, we demonstrate that their excited-state properties are dominated by strongly bound excitons. The spectral fingerprints corresponding to different reaction stages in their bottom-up fab…
Armchair graphene nanoribbons (AGNRs) with sub-nanometer width are potential materials for fabrication of novel nanodevices thanks to their moderate direct band gaps. AGNRs are usually synthesized by polymerizing precursor molecules on substrate surface. However, it is time-consuming and not suitable for large-scale production. AGNRs can also be grown by transforming precursor molecules inside single-walled carbon nanotubes via furnace annealing, but the obtained AGNRs are normally twisted. In this work, microwave heating is applied for transforming precursor molecules into AGNRs. The fast hea…
The advent of on-surface chemistry under vacuum has vastly increased our capabilities to synthesize carbon-nanomaterials with atomic precision. Among the types of target structures that have been synthesized by these means, graphene nanoribbons (GNRs) have probably attracted the most attention. In this context, the vast majority of GNRs have been synthesized from the same chemical reaction: Ullmann coupling followed by cyclodehydrogenation. Here, we provide a detailed study of the growth process of 5-atom-wide armchair GNRs starting from dibromoperylene. Combining scanning probe microscopy wit…
By applying tight binding model, we investigate the electronic and transport properties of randomly distributed Stone-Wales (SW) defects on an armchair graphene nanoribbon (AGNR). We use four different functions, as distribution functions, to generate our SW defected nanoribbons. It is found that defect density can have a major effect on the conductance of our defected system, whilst other configurations such as defect orientation will contribute less. In our investigations. some special geometries are found, which shows interesting electronic and transport properties. These special cases alon…
It is known that there is a wide class of quasi-two-dimensional graphenelike nanomaterials which in many respects can outperform graphene. So, here in addition to graphene, the attention is directed to stanene (buckled honeycomb structure) and phosphorene (puckered honeycomb structure). It is shown that, depending on the doping, these materials can have magnetically ordered edges. Computed diagrams of magnetic phases illustrate that, on the one hand, n-type doped narrow zigzag nanoribbons of graphene and stanene have antiferromagnetically aligned magnetic moments between the edges. On the othe…
Intrinsic Properties of Bipolarons in Armchair Graphene Nanoribbons
Federal Institute of Education, Science and Technology of Góias（戈亚斯联邦教育、科学与理工学院）；Institute of Physics, University of Brasília（巴西利亚大学物理研究所）；PPGCIMA, Campus Planaltina, University of Brasília（巴西利亚大学普拉兰蒂纳校区PPGCIMA）
With the help of our recently developed massively parallel DGDFT (Discontinuous Galerkin Density Functional Theory) methodology, we perform large-scale Kohn-Sham density functional theory calculations on phosphorene nanoribbons with armchair edges (ACPNRs) containing a few thousands to ten thousand atoms. The use of DGDFT allows us to systematically achieve conventional plane wave basis set type of accuracy, but with a much smaller number (about 15) of adaptive local basis (ALB) functions per atom for this system. The relatively small number degrees of freedom required to represent the Kohn-Sh…
We study the properties of flat-bands that appear in a heterostructure composed of strands of different widths of graphene armchair nanoribbons. One of the flat-bands is reminiscent of the one that appears in pristine armchair nanoribbons and has its origin in a quantum mechanical destructive interference effect, dubbed `Wannier orbital states' by Lin et al. in Phys. Rev. B 79, 035405 (2009). The additional flat-bands found in these heterostructures, some reasonably closer to the Fermi level, seem to be generated by a similar interference process. After doing a thorough tight-binding analysis …
The electronic properties of antimonene, single-layer Sb, are attracting great attention. In this paper, spin transport in armchair antimonene nanoribbon (ASbNR) is investigated. Following the tight-binding model, we calculate both the transmission probability and the conductance by means of the non-equilibrium Green's function (NEGF) method. The effects of an external electric field vertical to the ribbon plane are explored. Our results indicate that the spin-flip rate increases with the vertical electric field. Disorder effects on spin transport are addressed by considering the presence of c…
Finite-length armchair graphene nanoribbons can behave as one dimensional topological materials, that may show edge states in their zigzag-terminated edges, depending on their width and termination. We show here a full solution of Tight-Binding graphene rectangles of any length and width that can be seen as either finite-length armchair or zigzag ribbons. We find exact analytical expressions for both bulk and edge eigen-states and eigen-energies. We write down exact expressions for the Coulomb interactions among edge states and introduce a Hubbard-dimer model to analyse the emergence and featu…
Surface-Dependent Phonon Dynamics in 9-Armchair Graphene Nanoribbon Arrays
Swiss Federal Laboratories for Materials Science and Technology (Empa)（瑞士联邦材料科技研究所）；University of Basel（巴塞尔大学）；Swiss Nanoscience Institute, University of Basel（巴塞尔大学瑞士纳米科学研究所）；University of Zürich（苏黎世大学）
We employ first-principles calculations based density-functional-theory (DFT) approach to study electronic properties of partially and fully edge-hydrogenated armchair boron-nitrogen-carbon (BNC) nanoribbons (ABNCNRs), with widths between 0.85 nm to 2.3 nm. Due to the partial passivation of edges, electrons which do not participate in the bonding, form new energy states located near the Fermi-level. Because of these additional bands, some ABNCNRs exhibit metallic behavior, which is quite uncommon in armchair nanoribbons. Our calculations reveal that the metallic behavior is observed for the fo…
We report on the energy level alignment evolution of valence and conduction bands of armchair-oriented graphene nanoribbons (aGNR) as their band gap shrinks with increasing width. We use 4,4-dibromo-para-terphenyl as molecular precursor on Au(111) to form extended poly-para-phenylene nanowires, which can be fused sideways to form atomically precise aGNRs of varying widths. We measure the frontier bands by means of scanning tunneling spectroscopy, corroborating that the nanoribbons band gap is inversely proportional to their width. Interestingly, valence bands are found to show Fermi level pinn…
Graphene nanoribbons (GNRs) are one-dimensional (1D) structures that exhibit a rich variety of electronic properties1-17. Therefore, they are predicted to be the building blocks in next-generation nanoelectronic devices. Theoretically, it has been demonstrated that armchair GNRs can be divided into three families, i.e., Na = 3p, Na = 3p + 1, and Na = 3p + 2 (here Na is the number of dimer lines across the ribbon width and p is an integer), according to their electronic structures, and the energy gaps for the three families are quite different even with the same p1,3-6. However, a systematic ex…
Bottom-up assembled nanomaterials and nanostructures allow for the studies of rich and unprecedented quantum-related and mesoscopic transport phenomena. However, it can be difficult to quantify the correlations between the geometrical or structural parameters obtained from advanced microscopy and measured electrical characteristics when they are made into macroscopic devices. Here, we propose a strategy to connect the nanomaterial morphologies and the device performance through a Monte Carlo device model and apply it to understand the scaling trends of bottom-up synthesized armchair graphene n…
Graphene nanoribbons with armchair edges are studied for externally enhanced, but realistic parameter values: enhanced Rashba spin-orbit coupling due to proximity to a transition metal dichalcogenide like WS$_{2}$, and enhanced Zeeman field due to exchange coupling with a magnetic insulator like EuS under applied magnetic field. The presence of s--wave superconductivity, induced either by proximity or by decoration with alkali metal atoms like Ca or Li, leads to a topological superconducting phase with Majorana end modes. The topological phase is highly sensitive to the application of uniaxial…
The effects of tensile strain on the current-voltage (I-V) characteristics of hydrogenated-edge armchair graphene nanoribbons (HAGNRs) are investigated by using DFT theory. The strain is introduced in two different ways related to the two types of systems studied in this work: in-plane strained systems (A), and out-of-plane strained systems due to bending (B). These two kinds of strain lead to make a distinction among three cases: in-plane strained systems with strained electrodes (A1) and with unstrained electrodes (A2), and out-of-plane homogeneously strained systems with unstrained, fixed e…
