We propose and analyze a combined finite volume--nonconforming finite element scheme on general meshes to simulate the two compressible phase flow in porous media. The diffusion term, which can be anisotropic and heterogeneous, is discretized by piecewise linear nonconforming triangular finite elements. The other terms are discretized by means of a cell-centered finite volume scheme on a dual mesh, where the dual volumes are constructed around the sides of the original mesh. The relative permeability of each phase is decentred according the sign of the velocity at the dual interface. This technique also ensures the validity of the discrete maximum principle for the saturation under a non restrictive shape regularity of the space mesh and the positiveness of all transmissibilities. Next, a priori estimates on the pressures and a function of the saturation that denote capillary terms are established. These stabilities results lead to some compactness arguments based on the use of the Kolmogorov compactness theorem, and allow us to derive the convergence of a subsequence of the sequence of approximate solutions to a weak solution of the continuous equations, provided the mesh size tends to zero. The proof is given for the complete system when the density of the each phase depends on the own pressure.
The entropy conservative, curvilinear, nonconforming, p-refinement algorithm for hyperbolic conservation laws of Del Rey Fernandez et al. (2019), is extended from the compressible Euler equations to the compressible Navier-Stokes equations. A simple and flexible coupling procedure with planar interpolation operators between adjoining nonconforming elements is used. Curvilinear volume metric terms are numerically approximated via a minimization procedure and satisfy the discrete geometric conservation law conditions. Distinct curvilinear surface metrics are used on the adjoining interfaces to c…
In this paper, the entropy conservative/stable algorithms presented by Del Rey Fernandez and coauthors [18,16,17] for the compressible Euler and Navier-Stokes equations on nonconforming p-refined/coarsened curvilinear grids is extended to h/p refinement/coarsening. The main difficulty in developing nonconforming algorithms is the construction of appropriate coupling procedures across nonconforming interfaces. Here, a computationally simple and efficient approach based upon using decoupled interpolation operators is utilized. The resulting scheme is entropy conservative/stable and element-wise …
The entropy conservative/stable algorithm of Friedrich~\etal (2018) for hyperbolic conservation laws on nonconforming p-refined/coarsened Cartesian grids, is extended to curvilinear grids for the compressible Euler equations. The primary focus is on constructing appropriate coupling procedures across the curvilinear nonconforming interfaces. A simple and flexible approach is proposed that uses interpolation operators from one element to the other. On the element faces, the analytic metrics are used to construct coupling terms, while metric terms in the volume are approximated to satisfy a disc…
This paper is concerned with the numerical solution of compressible fluid flow in a fractured porous medium. The fracture represents a fast pathway (i.e., with high permeability) and is modeled as a hypersurface embedded in the porous medium. We aim to develop fast-convergent and accurate global-in-time domain decomposition (DD) methods for such a reduced fracture model, in which smaller time step sizes in the fracture can be coupled with larger time step sizes in the subdomains. Using the pressure continuity equation and the tangential PDEs in the fracture-interface as transmission conditions…
We propose in this paper a discretization of the momentum convection operator for fluid flow simulations on quadrangular or hexahedral meshes. The space discretization is performed by the loworder nonconforming Rannacher-Turek finite element: the scalar unknowns are associated to the cells of the mesh, while the velocities unknowns are associated to the edges or faces. The momentum convection operator is of finite volume type, and its almost second order expression is derived by a MUSCL-like technique. The latter is of algebraic type, in the sense that the limitation procedure does not invoke …
Convergence of a Finite Volume Scheme for Gas Water Flow in a Multi-Dimensional Porous Media
Institut Mathematiques de Bordeaux, Universite Victor Segalen Bordeaux 2（波尔多大学数学研究所）；Ecole Centrale de Nantes, Université de Nantes, Laboratoire de Mathématiques Jean Leray（南特中央理工学院，南特大学，让·勒雷数学实验室）
Positivity-Preserving and Entropy-Stable Oscillation-Eliminating DGSEM for the Compressible Euler Equations on Curvilinear Meshes with Adaptive Mesh Refinement
The discrete fracture model (DFM) has been widely used in the simulation of fluid flow in fractured porous media. Traditional DFM uses the so-called hybrid-dimensional approach to treat fractures explicitly as low-dimensional entries (e.g. line entries in 2D media and face entries in 3D media) on the interfaces of matrix cells and then couple the matrix and fracture flow systems together based on the principle of superposition with the fracture thickness used as the dimensional homogeneity factor. Because of this methodology, DFM is considered to be limited on conforming meshes and thus may ra…
When expressed in Lagrangian variables, the equations of motion for compressible (barotropic) fluids have the structure of a classical Hamiltonian system in which the potential energy is given by the internal energy of the fluid. The dissipative counterpart of such a system coincides with the porous medium equation, which can be cast in the form of a gradient flow for the same internal energy. Motivated by these related variational structures, we propose a particle method for both problems in which the internal energy is replaced by its Moreau-Yosida regularization in the L2 sense, which can b…
We address the discretization of two-phase Darcy flows in a fractured and deformable porous medium, including frictional contact between the matrix-fracture interfaces. Fractures are described as a network of planar surfaces leading to the so-called mixed- or hybrid-dimensional models. Small displacements and a linear elastic behavior are considered for the matrix. Phase pressures are supposed to be discontinuous at matrix-fracture interfaces, as they provide a better accuracy than continuous pressure models even for high fracture permeabilities. The general gradient discretization framework i…
We present a hybrid-mixed finite element method for a novel hybrid-dimensional model of single-phase Darcy flow in a fractured porous media. In this model, the fracture is treated as an $(d-1)$-dimensional interface within the $d$-dimensional fractured porous domain, for $d=2, 3$. Two classes of fracture are distinguished based on the permeability magnitude ratio between the fracture and its surrounding medium: when the permeability in the fracture is (significantly) larger than in its surrounding medium, it is considered as a {\it conductive} fracture; when the permeability in the fracture is…
In this paper, we study the generalized multiscale finite element method (GMsFEM) for single phase compressible flow in highly heterogeneous porous media. We follow the major steps of the GMsFEM to construct permeability dependent offline basis for fast coarse-grid simulation. The offline coarse space is efficiently constructed only once based on the initial permeability field with parallel computing. A rigorous convergence analysis is performed for two types of snapshot spaces. The analysis indicates that the convergence rates of the proposed multiscale method depend on the coarse meshsize an…
In this paper we develop an a priori error analysis of a new unified mixed finite element method for the coupling of fluid flow with porous media flow in $\mathbb{R}^N$, $N\in\{2,3\}$ on isotropic meshes. Flows are governed by the Stokes and Darcy equations, respectively, and the corresponding transmission conditions are given by mass conservation, balance of normal forces, and the Beavers-Joseph-Saffman law. The approach utilizes a modification of the Darcy problem which allows us to apply a variant nonconforming Crouzeix-Raviart finite element to the whole coupled Stokes-Darcy problem. The w…
In this work, we consider compressible single-phase flow problems in a porous media containing a fracture. In the latter, a non-linear pressure-velocity relation is prescribed. Using a non-overlapping domain decomposition procedure, we reformulate the global problem into a non-linear interface problem. We then introduce two new algorithms that are able to efficiently handle the non-linearity and the coupling between the fracture and the matrix, both based on linearization by the so-called L-scheme. The first algorithm, named MoLDD, uses the L-scheme to resolve the non-linearity, requiring at e…
