Coronal cells are visible at temperatures of ~ 1.2 MK in Fe XII coronal images obtained from the Solar Dynamics Observatory (SDO) and Solar Terrestrial Relations Observatory (STEREO) spacecraft. We show that near a filament channel, the plumelike tails of these cells bend horizontally in opposite directions on the two sides of the channel like fibrils in the chromosphere. Because the cells are rooted in magnetic flux concentrations of majority polarity, these observations can be used with photospheric magnetograms to infer the direction of the horizontal field in filament channels and the chirality of the associated magnetic field. This method is similar to the procedure for inferring the direction of the magnetic field and the chirality of the fibril pattern in filament channels from H-alpha observations. However, the coronal cell observations are easier to use and provide clear inferences of the horizontal field direction for heights up to ~ 50 Mm into the corona.
Filaments which form either between or around active regions (ARs) are called intermediate filaments. In spite of various theoretical studies, the origin of the chirality of filaments is still uncovered. We investigated how intermediate filaments are related to their associated ARs, especially from the point of view of magnetic helicity and the orientation of polarity inversion lines (PILs). The chirality of filaments has been determined based on the orientations of barbs observed in BBSO full-disk Halpha images taken during the rising phase of solar cycle 23. The sign of magnetic helicity of …
It is well known that solar filaments are features in the solar atmosphere which show a hemispheric preference in their chirality. The hemispheric preference is such that the dextral chirality dominates in the northern hemisphere while the sinistral chirality dominates in the southern. Determining the strength and cyclic variation of the degree of this hemispheric preference, however, is challenging and tedious and thus needs to be automated. In this paper, we follow Dr. Pietro Bernasconi's algorithm (Bernasconi et al. 2005) to detect filament chirality with two parallel channels of applicatio…
The orientation, chirality, and dynamics of solar eruptive filaments is a key to understanding the magnetic field of coronal mass ejections (CMEs) and therefore to predicting the geoeffectiveness of CMEs arriving at Earth. However, confusion and contention remain over the relationship between the filament chirality, magnetic helicity, and sense of rotation during eruption. To resolve the ambiguity in observations, in this paper, we used stereoscopic observations to determine the rotation direction of filament apex and the method proposed by Chen et al. (2014) to determine the filament chiralit…
Filaments may be mistaken for coronal holes when observed in extreme ultraviolet (EUV) images; however, a closer and more careful look reveals that their photometric properties are different. The combination of EUV images with photospheric magnetograms shows some characteristic differences between filaments and coronal holes. We have performed analyses with 7 different SDO/AIA wavelengths (94, 131, 171, 211, 193, 304, 335~Å) and SDO/HMI magnetograms obtained in September 2011 and March 2012 to study coronal holes and filaments from the photometric, magnetic, and also geometric point of view, s…
We attempt to propose a method for automatically detecting the solar filament chirality and barb bearing. We first introduce the unweighted undirected graph concept and adopt the Dijkstra shortest-path algorithm to recognize the filament spine. Then, we use the polarity inversion line (PIL) shift method for measuring the polarities on both sides of the filament, and employ the connected components labeling method to identify the barbs and calculate the angle between each barb and the spine to determine the bearing of the barbs, i.e., left or right. We test the automatic detection method with H…
In this study, we describe and evaluate shape measures for distinguishing between coronal holes and filament channels as observed in Extreme Ultraviolet (EUV) images of the Sun. For a set of well-observed coronal hole and filament channel regions extracted from SDO/AIA 193Å images we analyze their intrinsic morphology during the period 2011 to 2013, by using well known shape measures from the literature and newly developed geometrical classification methods. The results suggest an asymmetry in the morphology of filament channels giving support for the sheared arcade or weakly twisted flux rope…
Filaments and coronal holes, two principal features observed in the solar corona are sources of space weather variations. Filament formation is closely associated with polarity inversion lines (PIL) on the solar photosphere which separate positive and negative polarities of the surface magnetic field. The origin of coronal holes is governed by large-scale unipolar magnetic patches on the photosphere from where open magnetic field lines extend to the heliosphere. We study properties of filaments, PILs and coronal holes in solar cycles 20, 21, 22 and 23 utilizing the McIntosh archive. We detect …
Morphology of Solar Filaments During the Solar Maximum of Cycle 24: A Study of 35 Filaments Focusing on Chirality, Barb Orientation, Skewness, and Eruptive Behavior
National Institute of Technology Calicut（国立卡尔卡提理工学院）；Indian Institute of Astrophysics（印度天体物理研究所）
Using the high-quality observations of the Solar Dynamics Observatory, we present the interaction of two filaments (F1 and F2) in a long filament channel associated with twin coronal mass ejections (CMEs) on 2016 January 26. Before the eruption, a sequence of rapid cancellation and emergence of the magnetic flux has been observed, which likely triggered the ascending of the west filament (F1). The east footpoints of rising F1 moved toward the east far end of the filament channel, accompanying with post-eruption loops and flare ribbons. It likely indicated a large-scale eruption involving the l…
Recent observations have revealed that many solar coronal jets involve the eruption of miniature versions of large-scale filaments. Such "mini-filaments" are observed to form along the polarity inversion lines of strong, magnetically bipolar regions embedded in open (or distantly closing) unipolar field. During the generation of the jet, the filament becomes unstable and erupts. Recently we described a model for these mini-filament jets, in which the well-known magnetic-breakout mechanism for large-scale coronal mass ejections is extended to these smaller events. In this work we use three-dime…
Magnetic reconnection, the rearrangement of magnetic field topology, is a fundamental physical process in magnetized plasma systems all over the universe1,2. Its process is difficult to be directly observed. Coronal structures, such as coronal loops and filament spines, often sketch the magnetic field geometry and its changes in the solar corona3. Here we show a highly suggestive observation of magnetic reconnection between an erupting solar filament and its nearby coronal loops, resulting in changes in connection of the filament. X-type structures form when the erupting filament encounters th…
We present a rare observation of direct magnetic interaction between an activating filament and a coronal hole (CH). The filament was a quiescent one located at the northwest of the CH. It underwent a nonradial activation, during which filament material constantly fell and intruded into the CH. As a result, the CH was clearly destroyed by the intrusion. Brightenings appeared at the boundaries and in the interior of the CH, meanwhile, its west boundaries began to retreat and the area gradually shrank. It is noted that the CH went on shrinking after the end of the intrusion and finally disappear…
Solar filament shape in projection on disc depends on the structure of the coronal magnetic field. We calculate the position of polarity inversion lines (PILs) of coronal potential magnetic field at different heights above the photosphere, which compose the magnetic neutral surface, and compare with them the distribution of the filament material in H$α$ chromospheric images. We found that the most of the filament material is enclosed between two polarity inversion lines (PILs), one at a lower height close to the chromosphere and one at a higher level, which can be considered as a height of the…
A non-potential quasi-static evolution model coupling the Sun's photospheric and coronal magnetic fields is applied to the problem of filament chirality at high latitudes. For the first time, we run a continuous 15 year simulation, using bipolar active regions determined from US National Solar Observatory, Kitt Peak magnetograms between 1996 and 2011. Using this simulation, we are able to address the outstanding question of whether magnetic helicity transport from active latitudes can overcome the effect of differential rotation at higher latitudes. Acting alone, differential rotation would pr…
Coronal disturbances associated with solar flares, such as H$α$ Moreton waves, X-ray waves, and extreme ultraviolet (EUV) coronal waves are discussed herein in relation to magnetohydrodynamics fast-mode waves or shocks in the corona. To understand the mechanism of coronal disturbances, full-disk solar observations with high spatial and temporal resolution over multiple wavelengths are of crucial importance. We observed a filament eruption, whose shape is like a "dandelion", associated with the M1.6 flare that occurred on 2011 February 16 in the H$α$ images taken by the Flare Monitoring Telesco…
In solar filament formation mechanisms, magnetic reconnection between two sets of sheared arcades forms helical structures of the filament with numerous magnetic dips, and cooling and condensation of plasma trapped inside the helical structures supply mass to the filament. Although each of these processes, namely, magnetic reconnection and coronal condensation have been separately reported, observations that show the whole process of filament formation are rare. In this Letter, we present the formation of a sigmoid via reconnection between two sets of coronal loops, and the subsequent formatio…
It has been revealed that the magnetic topology in the solar atmosphere displays hemispheric preference, i.e., negative/positive helicity in the northern/southern hemisphere, respectively. However, the strength of the hemispheric rule and its cyclic variation are controversial. In this paper, we apply a new method based on filament drainage to 571 erupting filaments from 2010 May to 2015 December in order to determine the filament chirality and its hemispheric preference. It is found that $91.6\%$ of our sample of erupting filaments follow the hemispheric rule of helicity sign. It is found tha…
Successive Coronal Jets as Novel Facilitators for Filament Oscillation and Eruption
School of Physics and Astronomy, Yunnan University（云南大学物理与天文学院）；Yunnan Key Laboratory of the Solar physics and Space Science（云南省太阳物理与空间科学重点实验室）；School of Intelligence Science and Technology, Nanjing University（南京大学智能科学与技术学院）
We study the evolution of a group of TRACE 195 A coronal loops overlying a reverse S-shaped filament on 2001 June 15. These loops were initially pushed upward with the filament ascending and kinking slowly, but as soon as the filament rose explosively, they began to contract at a speed of ~100 km/s, and sustained for at least 12 min, presumably due to the reduced magnetic pressure underneath with the filament escaping. Despite the contraction following the expansion, the loops of interest remained largely intact during the filament eruption, rather than formed via reconnection. These contracti…
To investigate the excitation of kink oscillations in coronal loops and filaments, a C3.4 circular-ribbon flare (CRF) associated with a blowout jet in active region 12434 on 2015 October 16 is analyzed. The flare excited small-amplitude kink oscillation of a remote coronal loop. The oscillation lasted for $\ge$4 cycles without significant damping. The amplitude and period are 0.3$\pm$0.1 Mm and 207$\pm$12 s. Interestingly, the flare also excited transverse oscillation of a remote filament. The oscillation lasted for $\sim$3.5 cycles with decaying amplitudes. The initial amplitude is 1.7$-$2.2 …
Low-temperature plasma ejected in solar eruptions can screen active regions as well as quiet solar areas. Absorption phenomena can be observed in microwaves as 'negative bursts' and in different spectral domains. We analyze two very different recent events with such phenomena and present an updated systematic view of solar events associated with negative bursts. Related filament eruptions can be normal, without essential changes of shape and magnetic configuration, and 'anomalous'. The latter are characterized by disintegration of an eruptive filament and dispersal of its remnants as a cloud o…
To better understand magnetic structure and eruptive process of solar filaments, a solar active-region filament (labeled F2) eruption associated with a B-class flare was investigated by using high-resolution H$α$ data from the 1 m New Vacuum Solar Telescope (NVST), combined with EUV observations of the Solar Dynamical Observatory (SDO). The filament F2 was disturbed by another filament (labeled F1) eruption that experienced a whip-like motion. Before the filament F2 eruption, the Dopplergrams show that the southern and the northern parts of the filament F2 body exhibit blueshift and redshift a…
We present the first observation of a solar filament formed by magnetic reconnection and associated chromospheric evaporation and subsequent coronal condensation. Driven by shearing motion during flux emergence, a sequential tether-cutting reconnection processes occurred and resulted in an M1.3 confined flare accompany with the formation of a sigmoid structure. It is found that the flare had a conjugate compact footpoint brightenings, which correspond to the footpoints of the sigmoid. Furthermore, observational evidence of explosive evaporation is well diagnosed at the conjugate footpoint brig…
A magnetic flux rope structure is believed to exist in most coronal mass ejections (CMEs). However, it has been long debated whether the flux rope exists before eruption or is formed during eruption via magnetic reconnection. The controversy has been continuing because of our lack of routine measurements of the magnetic field in the pre-eruption structure, such as solar filaments. However, recently an indirect method was proposed to infer the magnetic field configuration based on the sign of helicity and the bearing direction of the filament barbs. In this paper, we apply this method to two er…
We study the formation and evolution of a failed filament eruption observed in NOAA active region 11121 near the southeast limb on November 6, 2010. We use a time series of SDO/AIA 304, 171, 131, 193, 335, 94 Å images, SDO/HMI magnetograms, plus ROSA and ISOON Hαimages, to study the erupting active region. We identify coronal loop arcades associated with a quadrupolar magnetic configuration, and show that the expansion and cancelation of the central loop arcade system over the filament is followed by the eruption of the filament. The erupting filament reveals a clear helical twist and develops…
Coronal mass ejections (CMEs) play a decisive role in driving space weather, especially, the fast ones (e.g., with speeds above $800$~km~s$^{-1}$). Understanding the trigger mechanisms of fast CMEs can help us gaining important information in forecasting them. The filament eruptions accompanied with CMEs provide a good tracer in studying the early evolution of CMEs. Here we surveyed 66 filament-accompanied fast CMEs to analyse the correlation between the trigger mechanisms, namely either magnetic reconnection or ideal MHD process, associated flares, and CME speeds. Based on the data gathering …
Quiescent filaments are usually affected by internal and/or external perturbations triggering oscillations of different kinds. In particular, external large-scale coronal waves can perturb remote quiescent filaments leading to large-amplitude oscillations. Observational reports have indicated that the activation time of oscillations coincides with the passage of a large-scale coronal wavefront through the filament, although the disturbing wave is not always easily detected. Aiming to contribute to understand how -- and to what extent -- coronal waves are able to excite filament oscillations, h…
Solar filaments are an intriguing phenomenon, like cool clouds suspended in the hot corona. Similar structures exist in the intergalactic medium as well. Despite being a long-studied topic, solar filaments have continually attracted intensive attention because of their link to the coronal heating, coronal seismology, solar flares, and coronal mass ejections (CMEs). In this review paper, by combing through the solar filament-related work done in the past decade, we discuss several controversial topics, such as the fine structures, dynamics, magnetic configurations, and helicity of filaments. Wi…
Solar filament are commonly thought to be supported in magnetic dips, in particular, of magnetic flux ropes (FRs). In this Letter, from the observed photospheric vector magnetogram, we implement a nonlinear force-free field (NLFFF) extrapolation of a coronal magnetic FR that supports a large-scale intermediate filament between an active region and a weak polarity region. This result is the first in that current NLFFF extrapolations with presence of FRs are limited to relatively small-scale filaments that are close to sunspots and along main polarity inversion line (PIL) with strong transverse …
With the launch of SDO, many EUV waves were observed during solar eruptions. However, the joint observations of Moreton and EUV waves are still relatively rare. We present an event that a small-scale filament eruption simultaneously results in a Moreton wave, an EUV wave and a Coronal Mass Ejection in active region NOAA 12740. Firstly, we find that some dark elongate lanes or filamentary structures in the photosphere existed under the small-scale filament and drifted downward, which manifests that the small-scale filament was emerging and lifting from subsurface. Secondly, combining the simult…
By using H$α$, He I 10830, EUV and soft X-ray (SXR) data, we examined a filament eruption that occurred on a quiet-sun region near the center of the solar disk on 2006 January 12, which disturbed a sigmoid overlying the filament channel observed by the $\emph{GOES-12}$ SXR Imager (SXI), and led to the eruption of the sigmoid. The event was associated with a partial halo coronal mass ejection (CME) observed by the Large Angle and Spectrometric Coronagraphs (LASCO) on board the Solar and Heliospheric Observatory ($\emph{SOHO}$), and resulted in the formation of two flare-like ribbons, post-erupt…
In the past, there have been many studies claiming that the effects of geomagnetic storms strongly depends on the orientation of the magnetic-cloud part of the Coronal Mass Ejections (CMEs). Aparna & Martens (2020), using Halo-CME data from 2007-2017, have shown that the magnetic field orientation of filaments at the location where CMEs originate can be effectively used for predicting the onset of geo-magnetic storms. The purpose of this study is to extend their survey by analyzing the halo-CME data for 1996-2006. The correlation of filament axial direction and their corresponding Bz signature…
Supersonic flows observed by THEMIS related to a coronal bright point and filament
Kumaun University（库马翁大学）；Observatoire de Paris, Université PSL, CNRS, Sorbonne Université, Université Paris Cité（巴黎天文台，巴黎文理研究大学，法国国家科学研究中心，索邦大学，巴黎西岱大学）；KU Leuven（荷语鲁汶大学）；University of Glasgow（格拉斯哥大学）；LUNEX EMMESI Institut（LUNEX EMMESI研究所）；University of Oslo（奥斯陆大学）；University of Maria Curie-Skłodowska（玛丽亚·居里-斯可洛多夫斯卡大学）
Solar filaments/prominences are one of the most common features in the corona, which may lead to energetic coronal mass ejections (CMEs) and flares when they erupt. Filaments are about one hundred times cooler and denser than the coronal material, and physical understanding of their material origin remains controversial. Two types of scenarios have been proposed: one argues that the filament plasma is brought into the corona from photosphere or chromosphere through a siphon or evaporation/injection process, while the other suggests that the material condenses from the surrounding coronal plasm…
We present observations of a failed eruption of a magnetic flux rope recorded during the M6.2 flare of 14 July 2004. The observations were mainly made with TRACE 171 Å and 1600 Å filters. The flare was accompanied by a destabilization of a magnetic structure observed as a filament eruption. After an initial acceleration the eruption slowed down and finally was stopped by the overlying coronal loops. The observations suggest that the whole event is well described by the quadrupole model of a solar flare. The failed eruption stretched the loops lying above and then they were observed oscillating…
Triggering mechanisms of solar eruptions have long been a challenge. A few previous case studies have indicated that preceding gentle filament merging via magnetic reconnection may launch following intense eruption, according with the tether-cutting (TC) model. However, detailed process of TC reconnection between filaments has not been exhibited yet. In this work, we report the high resolution observations from the Interface Region Imaging Spectrometer (IRIS) of TC reconnection between two sheared filaments in NOAA active region 12146. The TC reconnection commenced since 15:35 UT on 2014 Augus…
The objectives of the present study is to provide a better physical understanding of the complex inter-relation and evolution of several solar coronal features comprising a double-peak flare, a coronal dimming caused by a CME, a CME-driven compression, and a fast-mode wave. For the first time, the evolution of an asymmetric eruptive filament is analysed in simultaneous SUMER spectroscopic and TRACE and EIT imaging data. We use imaging observations from EIT and TRACE in the 195A channel and spectroscopic observations from the CDS in a rastering and SUMER in a sit-and-stare observing mode. The S…
Extreme ultraviolet (EUV) waves are impressive coronal propagating disturbances. They are closely associated with various eruptions, and can used for the global coronal seismology and the acceleration of solar energetic particles. Hence, the study of EUV waves plays an important role in solar eruptions and Space Weather. Here we present an EUV wave associated with a filament activation that did not evolve into any eruption. Due to the continuous magnetic flux emergence and cancellation around its one end, the filament rose with untwisting motion, and the filament mass flowed towards another en…
When we examine the chirality or observed handedness of the chromospheric and coronal structures involved in the long-term build-up to eruptive events, we find that they evolve in very specific ways to form two and only two sets of large-scale chiral systems. Each system contains spatially separated components with both signs of chirality, the upper portion having negative (positive) chirality and the lower part possessing positive (negative) chirality. The components within a system are a filament channel (represented partially by sets of chromospheric fibrils), a filament (if present), a fil…
The dynamics of a filament channel are observed with imaging and spectroscopic telescopes before and during the filament eruption on 2011 January 29. The extreme ultraviolet (EUV) spectral observations reveal that there is no EUV counterparts of the H$α$ counter-streamings in the filament channel, implying that the ubiquitous H$α$ counter-streamings found by previous research are mainly due to longitudinal oscillations of filament threads, which are not in phase between each other. However, there exist larger-scale patchy counter-streamings in EUV along the filament channel from one polarity t…
Solar coronal plumes long seemed to possess a simple geometry supporting spatially coherent, stable outflow without significant fine structure. Recent high-resolution observations have challenged this picture by revealing numerous transient, small-scale, collimated outflows ("jetlets") at the base of plumes. The dynamic filamentary structure of solar plumes above these outflows, and its relationship with the overall plume structure, have remained largely unexplored. We analyzed the statistics of continuously observed fine structure inside a single representative bright plume within a mid-latit…
Solar X-ray jets are evidently made by a burst of reconnection of closed magnetic field in a jet's base with ambient "open" field (1,2). In the widely-accepted version of the "emerging-flux" model, that reconnection occurs at a current sheet between the open field and emerging closed field and also makes a compact hot brightening that is usually observed at the edge of the jet's base (1,3). Here we report on high-resolution X-ray and EUV observations of 20 randomly-selected X-ray jets in polar coronal holes. In each jet, contrary to the emerging-flux model, a miniature version of the filament …
The coronal blowout jet is a peculiar category among various jet phenomena, of which the sheared base arch, often carrying a small filament, experiences a miniature version of blowout eruption that produces large-scale coronal mass ejection (CME). In this paper, we report such a coronal blowout jet with high-resolution multi-wavelength and multi-angle observations taken from Solar Dynamics Observatory, Solar Terrestrial Relations Observatory, and Big Bear Solar Observatory. For the first time, we find that a simultaneous bubble-like and a jet-like CMEs were dynamically related to the blowout j…
We present observations of the eruption and then reformation of a filament caused by its nearby emerging magnetic flux. Driven by the emerging magnetic flux, the emerged positive fluxes moved toward and cancelled with its nearby negative fluxes, where the negative ends of a filament channel beneath the filament and a bundle of left-skewed coronal loops overlying the filament were anchored. Complemented by the nonlinear force-free field extrapolation, we find that the coronal magnetic field lines associated with the filament channel and the emerging magnetic fields consist of sheared field line…
We report two sympathetic solar eruptions, including a partial and a full flux rope eruption in a quadrupolar magnetic region, where a large and a small filament resided above the middle and the east neutral lines respectively. The large filament first rose slowly at a speed of 8 km/s for 23 minutes and then it was accelerated to 102 km/s. Finally, this filament erupted successfully and caused a coronal mass ejection. During the slow rising phase, various evidence for breakout-like external reconnection has been identified at high and low temperature lines. The eruption of the small filament s…
Magnetic flux ropes are the centerpiece of solar eruptions. Direct measurements for the magnetic field of flux ropes are crucial for understanding the triggering and energy release processes, yet they remain heretofore elusive. Here we report microwave imaging spectroscopy observations of an M1.4-class solar flare that occurred on 2017 September 6, using data obtained by the Expanded Owens Valley Solar Array. This flare event is associated with a partial eruption of a twisted filament observed in Hα by the Goode Solar Telescope at the Big Bear Solar Observatory. The extreme ultraviolet (EUV) a…
Solar filaments are cold and dense materials situated in magnetic dips, which show distinct radiation characteristics compared to the surrounding coronal plasma. They are associated with coronal sheared and twisted magnetic field lines. However, the exact magnetic configuration supporting a filament material is not easy to be ascertained because of the absence of routine observations of the magnetic field inside filaments. Since many filaments lie above weak-field regions, it is nearly impossible to extrapolate their coronal magnetic structures by applying the traditional methods to noisy phot…
Two of the most important features of the solar atmosphere are its hot, smooth coronal loops and the concentrations of magnetic shear, known as filament channels, that reside above photospheric polarity inversion lines (PILs). The shear observed in filament channels represents magnetic helicity, while the smoothness of the coronal loops indicates an apparent lack of magnetic helicity in the rest of the corona. At the same time, models that attempt to explain the high temperatures observed in these coronal loops require magnetic energy, in the form of twist, to be injected at the photosphere. I…
Magnetic flux ropes (MFRs) are believed to be at the heart of solar coronal mass ejections (CMEs). A well-known example is the prominence cavity in the low corona that sometimes makes up a three-part white-light (WL) CME upon its eruption. Such a system, which is usually observed in quiet-Sun regions, has long been suggested to be the manifestation of an MFR with relatively cool filament material collecting near its bottom. However, observational evidence of eruptive, filament-hosting MFR systems has been elusive for those originating in active regions. By utilizing multi-passband extreme-ultr…
Using the multi-wavelength images and the photospheric magnetograms from the \emph{Solar Dynamics Observatory}, we study the flare which was associated by the only one coronal mass ejection (CME) in active region (AR) 12192. The eruption of a filament caused a blowout jet, and then an M4.0 class flare occurred. This flare was located at the edge of AR instead of in the core region. The flare was close to the apparently "open" fields, appearing as extreme-ultraviolet structures that fan out rapidly. Due to the interaction between flare materials and "open" fields, the flare became an eruptive f…
Context: The origin of the variable component of the solar wind is of great intrinsic interest for heliophysics and space-weather, e.g. the initiation of coronal mass ejections, and the problem of mass loss of all stars. It is also related to the physics of coronal neutral sheets and streamers, occurring above lines of magnetic polarity reversal. Filaments and prominences correspond to the cool coronal component of these regions. Aims: We examine the dynamical behaviour of these structures where reconnection and dissipation of magnetic energy in the turbulent plasma are occurring. The link bet…
Solar filament eruptions play a crucial role in triggering coronal mass ejections (CMEs). More than 80 % of eruptions lead to a CME. This correlation has been studied extensively during the past solar cycles and the last long solar minimum. The statistics made on events occurring during the rising phase of the new solar cycle 24 is in agreement with this finding. Both filaments and CMEs have been related to twisted magnetic fields. Therefore, nearly all the MHD CME models include a twisted flux tube, called a flux rope. Either the flux rope is present long before the eruption, or it is built u…
