To investigate the excitation of kink oscillations in coronal loops and filaments, a C3.4 circular-ribbon flare (CRF) associated with a blowout jet in active region 12434 on 2015 October 16 is analyzed. The flare excited small-amplitude kink oscillation of a remote coronal loop. The oscillation lasted for $\ge$4 cycles without significant damping. The amplitude and period are 0.3$\pm$0.1 Mm and 207$\pm$12 s. Interestingly, the flare also excited transverse oscillation of a remote filament. The oscillation lasted for $\sim$3.5 cycles with decaying amplitudes. The initial amplitude is 1.7$-$2.2 Mm. The period and damping time are 437$-$475 s and 1142$-$1600 s. The starting times of simultaneous oscillations of coronal loop and filament were concurrent with the hard X-ray peak time. Though small in size and short in lifetime, the flare set off a chain reaction. It generated a bright secondary flare ribbon (SFR) in the chromosphere, remote brightening (RB) that was cospatial with the filament, and intermittent, jet-like flow propagating in the northeast direction. The loop oscillation is most probably excited by the flare-induced blast wave at a speed of $\ge$1300 km s$^{-1}$. The excitation of the filament oscillation is more complicated. The blast wave triggers secondary magnetic reconnection far from the main flare, which not only heats the local plasma to higher temperatures (SFR and RB), but produces jet-like flow (i.e., reconnection outflow) as well. The filament is disturbed by the secondary magnetic reconnection and experiences transverse oscillation. The findings give new insight into the excitation of transverse oscillations of coronal loops and filaments.
The dynamic properties of flare ribbons and the often associated filament eruptions can provide crucial information on the flaring coronal magnetic field. This Letter analyzes the GOES-class X1.0 flare on 2014 March 29 (SOL2014-03-29T17:48), in which we found an asymmetric eruption of a sigmoidal filament and an ensuing circular flare ribbon. Initially both EUV images and a preflare nonlinear force-free field model show that the filament is embedded in magnetic fields with a fan-spine-like structure. In the first phase, which is defined by a weak but still increasing X-ray emission, the wester…
We report observations of a two-stage coronal dimming in an eruptive event of a two-ribbon flare and a fast coronal mass ejection (CME). Weak gradual dimming persists for more than half an hour before the onset of the two-ribbon flare and the fast rise of the CME. It is followed by abrupt rapid dimming. The two-stage dimming occurs in a pair of conjugate dimming regions adjacent to the two flare ribbons, and the flare onset marks the transition between the two stages of dimming. At the onset of the two-ribbon flare, transient brightenings are also observed inside the dimming regions, before ra…
We analyze a unique event with an M1.8 confined circular-ribbon flare on 2016 February 13, with successive formations of two circular ribbons at the same location. The flare had two distinct phases of UV and EUV emissions with an interval of about 270 s, of which the second peak was energetically more important. The first episode was accompanied by the eruption of a mini-filament and the fast elongation motion of a thin circular ribbon (CR1) along the counterclockwise direction at a speed of about 220 km/s. Two elongated spine-related ribbons were also observed, with the inner ribbon co-tempor…
Filaments may be mistaken for coronal holes when observed in extreme ultraviolet (EUV) images; however, a closer and more careful look reveals that their photometric properties are different. The combination of EUV images with photospheric magnetograms shows some characteristic differences between filaments and coronal holes. We have performed analyses with 7 different SDO/AIA wavelengths (94, 131, 171, 211, 193, 304, 335~Å) and SDO/HMI magnetograms obtained in September 2011 and March 2012 to study coronal holes and filaments from the photometric, magnetic, and also geometric point of view, s…
Utilizing multiwavelength observations and magnetic field data from SDO/AIA, SDO/HMI, GOES and RHESSI, we investigate a large-scale ejective solar eruption of 2014 December 18 from active region NOAA 12241. This event produced a distinctive three-ribbon flare, having two parallel ribbons corresponding to the ribbons of a standard two-ribbon flare, and a larger-scale third quasi-circular ribbon offset from the other two ribbons. There are two components to this eruptive event. First, a flux rope forms above a strong-field polarity-inversion line and erupts and grows as the parallel ribbons turn…
How filaments form and erupt are topics about which solar researchers have wondered since more than a century and that are still open to debate. We present observations of a filament formation, its failed eruption, and the associated flare (SOL2019-05-09T05:51) that occurred in active region (AR) 12740 using data from SDO, STEREO-A, IRIS, and NSO/GONG. AR 12740 was a decaying region formed by a very disperse following polarity and a strong leading spot, surrounded by a highly dynamic zone where moving magnetic features (MMFs) were seen constantly diverging from the spot. Our analysis indicates…
We present multi-wavelength analysis of an eruption event that occurred in Active Region (AR) NOAA 11093 on 7 August 2010, using data obtained from SDO, STEREO, RHESSI and GONG H$α$ network telescope. From these observations, we inferred that upward slow rising motion of an inverse S-shaped filament lying along the polarity inversion line (PIL) resulted in a CME subsequent to a two-ribbon flare. Interaction of overlying field line across the filament with side lobe field lines, associated EUV brightening, and flux emergence/cancellation around the filament were the observational signatures of …
In this paper, multiwavelength observations of remote coronal dimmings related to an M1.1 circular-ribbon flare (CRF) in active region (AR) 12434 are reported. The confined flare without a CME was observed by AIA and HMI on board SDO on 2015 October 16. Global three-dimensional (3D) magnetic fields before flare were obtained using the potential field source surface modeling. A few minutes before the flare hard X-ray peak time (06:13:48 UT), small-scale, weak dimming appeared $\sim$240$\arcsec$ away from the flare site, which can be observed by AIA only in 131 and 171 Å. Afterwards, long and na…
In this study, we describe and evaluate shape measures for distinguishing between coronal holes and filament channels as observed in Extreme Ultraviolet (EUV) images of the Sun. For a set of well-observed coronal hole and filament channel regions extracted from SDO/AIA 193Å images we analyze their intrinsic morphology during the period 2011 to 2013, by using well known shape measures from the literature and newly developed geometrical classification methods. The results suggest an asymmetry in the morphology of filament channels giving support for the sheared arcade or weakly twisted flux rope…
The disintegration of solar filaments via mass drainage is a frequently observed phenomenon during a variety of filament activities. It is generally considered that the draining of dense filament material is directed by both gravity and magnetic field, yet the detailed process remains elusive. Here we report on a partial filament eruption during which filament material drains downward to the surface not only along the filament's legs, but to a remote flare ribbon through a fan-out curtain-like structure. It is found that the magnetic configuration is characterized by two conjoining dome-like q…
Filaments and coronal holes, two principal features observed in the solar corona are sources of space weather variations. Filament formation is closely associated with polarity inversion lines (PIL) on the solar photosphere which separate positive and negative polarities of the surface magnetic field. The origin of coronal holes is governed by large-scale unipolar magnetic patches on the photosphere from where open magnetic field lines extend to the heliosphere. We study properties of filaments, PILs and coronal holes in solar cycles 20, 21, 22 and 23 utilizing the McIntosh archive. We detect …
Using the high-quality observations of the Solar Dynamics Observatory, we present the interaction of two filaments (F1 and F2) in a long filament channel associated with twin coronal mass ejections (CMEs) on 2016 January 26. Before the eruption, a sequence of rapid cancellation and emergence of the magnetic flux has been observed, which likely triggered the ascending of the west filament (F1). The east footpoints of rising F1 moved toward the east far end of the filament channel, accompanying with post-eruption loops and flare ribbons. It likely indicated a large-scale eruption involving the l…
We develop a magnetic ribbon model for molecular cloud filaments. These result from turbulent compression in a molecular cloud in which the background magnetic field sets a preferred direction. We use our model to calculate a synthetic observed relation between apparent width in projection versus observed column density. The relationship is relatively flat, in rough agreement with the observations, and unlike the simple expectation based on a Jeans length argument.
Recent observations have revealed that many solar coronal jets involve the eruption of miniature versions of large-scale filaments. Such "mini-filaments" are observed to form along the polarity inversion lines of strong, magnetically bipolar regions embedded in open (or distantly closing) unipolar field. During the generation of the jet, the filament becomes unstable and erupts. Recently we described a model for these mini-filament jets, in which the well-known magnetic-breakout mechanism for large-scale coronal mass ejections is extended to these smaller events. In this work we use three-dime…
We develop a magnetic ribbon model for molecular cloud filaments. These result from turbulent compression in a molecular cloud in which the background magnetic field sets a preferred direction. We argue that this is a natural model for filaments and is based on the interplay between turbulence, strong magnetic fields, and gravitationally-driven ambipolar diffusion, rather than pure gravity and thermal pressure. An analytic model for the formation of magnetic ribbons that is based on numerical simulations is used to derive a lateral width of a magnetic ribbon. This differs from the thickness al…
We present new results from the Interface Region Imaging Spectrograph showing the dynamic evolution of chromospheric evaporation and condensation in a flare ribbon, with the highest temporal and spatial resolution to date. IRIS observed the entire impulsive phase of the X-class flare SOL2014-09-10T17:45 using a 9.4 second cadence `sit-and-stare' mode. As the ribbon brightened successively at new positions along the slit, a unique impulsive phase evolution was observed for many tens of individual pixels in both coronal and chromospheric lines. Each activation of a new footpoint displays the sam…
In this article, we compare the properties of two coronal mass ejections (CMEs) that show similar source region characteristics but different evolutionary behavior in the later phases. We discuss the two events in terms of their near-Sun characteristics, interplanetary evolution, and geo-effectiveness. We carefully analyzed the initiation and propagation parameters of these events to establish the precise CME-ICME connection and their near-Earth consequences. The First event was associated with poor geo-magentic storm disturbance index (Dst $\approx$-20 nT) while the second event is associated…
Magnetic reconnection, the rearrangement of magnetic field topology, is a fundamental physical process in magnetized plasma systems all over the universe1,2. Its process is difficult to be directly observed. Coronal structures, such as coronal loops and filament spines, often sketch the magnetic field geometry and its changes in the solar corona3. Here we show a highly suggestive observation of magnetic reconnection between an erupting solar filament and its nearby coronal loops, resulting in changes in connection of the filament. X-type structures form when the erupting filament encounters th…
We present a rare observation of direct magnetic interaction between an activating filament and a coronal hole (CH). The filament was a quiescent one located at the northwest of the CH. It underwent a nonradial activation, during which filament material constantly fell and intruded into the CH. As a result, the CH was clearly destroyed by the intrusion. Brightenings appeared at the boundaries and in the interior of the CH, meanwhile, its west boundaries began to retreat and the area gradually shrank. It is noted that the CH went on shrinking after the end of the intrusion and finally disappear…
We study a sequence of eruptive events including filament eruption, a GOES C4.3 flare and a coronal mass ejection. We aim to identify the possible trigger(s) and precursor(s) of the filament destabilisation; investigate flare kernel characteristics; flare ribbons/kernels formation and evolution; study the interrelation of the filament-eruption/flare/coronal-mass-ejection phenomena as part of the integral active-region magnetic field configuration; determine Hα line profile evolution during the eruptive phenomena. Multi-instrument observations are analysed including Hα line profiles, speckle im…
Solar filament shape in projection on disc depends on the structure of the coronal magnetic field. We calculate the position of polarity inversion lines (PILs) of coronal potential magnetic field at different heights above the photosphere, which compose the magnetic neutral surface, and compare with them the distribution of the filament material in H$α$ chromospheric images. We found that the most of the filament material is enclosed between two polarity inversion lines (PILs), one at a lower height close to the chromosphere and one at a higher level, which can be considered as a height of the…
Filament eruptions occurring at different places within a relatively short time internal, but with a certain physical causal connection are usually known as sympathetic eruption. Studies on sympathetic eruptions are not uncommon. However, in the existed reports, the causal links between sympathetic eruptions remain rather speculative. In this work, we present detailed observations of a sympathetic filament eruption event, where an identifiable causal link between two eruptive filaments is observed. On 2015 November 15, two filaments (F1 in the north and F2 in the south) were located at the sou…
Coronal disturbances associated with solar flares, such as H$α$ Moreton waves, X-ray waves, and extreme ultraviolet (EUV) coronal waves are discussed herein in relation to magnetohydrodynamics fast-mode waves or shocks in the corona. To understand the mechanism of coronal disturbances, full-disk solar observations with high spatial and temporal resolution over multiple wavelengths are of crucial importance. We observed a filament eruption, whose shape is like a "dandelion", associated with the M1.6 flare that occurred on 2011 February 16 in the H$α$ images taken by the Flare Monitoring Telesco…
In this paper, we present unique observations of a blowout coronal jet that possibly triggered a two-ribbon confined C1.2 flare in a bipolar solar active region NOAA 12615 on 2016 December 5. The jet activity initiates at chromospheric/transition-region heights with a small brightening that eventually grows in a larger volume with well developed standard morphological jet features, viz., base and spire. The spire widens up with a collimated eruption of cool and hot plasma components, observed in the 304 and 94 A channels of AIA, respectively. The speed of the plasma ejection, which forms the j…
Coronal cells are visible at temperatures of ~ 1.2 MK in Fe XII coronal images obtained from the Solar Dynamics Observatory (SDO) and Solar Terrestrial Relations Observatory (STEREO) spacecraft. We show that near a filament channel, the plumelike tails of these cells bend horizontally in opposite directions on the two sides of the channel like fibrils in the chromosphere. Because the cells are rooted in magnetic flux concentrations of majority polarity, these observations can be used with photospheric magnetograms to infer the direction of the horizontal field in filament channels and the chir…
In solar filament formation mechanisms, magnetic reconnection between two sets of sheared arcades forms helical structures of the filament with numerous magnetic dips, and cooling and condensation of plasma trapped inside the helical structures supply mass to the filament. Although each of these processes, namely, magnetic reconnection and coronal condensation have been separately reported, observations that show the whole process of filament formation are rare. In this Letter, we present the formation of a sigmoid via reconnection between two sets of coronal loops, and the subsequent formatio…
Successive Coronal Jets as Novel Facilitators for Filament Oscillation and Eruption
School of Physics and Astronomy, Yunnan University（云南大学物理与天文学院）；Yunnan Key Laboratory of the Solar physics and Space Science（云南省太阳物理与空间科学重点实验室）；School of Intelligence Science and Technology, Nanjing University（南京大学智能科学与技术学院）
We study the evolution of a group of TRACE 195 A coronal loops overlying a reverse S-shaped filament on 2001 June 15. These loops were initially pushed upward with the filament ascending and kinking slowly, but as soon as the filament rose explosively, they began to contract at a speed of ~100 km/s, and sustained for at least 12 min, presumably due to the reduced magnetic pressure underneath with the filament escaping. Despite the contraction following the expansion, the loops of interest remained largely intact during the filament eruption, rather than formed via reconnection. These contracti…
We report our multiwavelength observations of two homologous circular-ribbon flares (CRFs) in active region 11991 on 2014 March 5, focusing on the transverse oscillations of an extreme-ultraviolet (EUV) loop excited by the flares. The transverse oscillations are of fast standing kink-mode. The first-stage oscillation triggered by the C2.8 flare is decayless with lower amplitudes (310$-$510 km). The periods (115$-$118 s) in different wavelengths are nearly the same, indicating coherent oscillations. The magnetic field of the loop is estimated to be 65$-$78 G. The second-stage oscillation trigge…
Low-temperature plasma ejected in solar eruptions can screen active regions as well as quiet solar areas. Absorption phenomena can be observed in microwaves as 'negative bursts' and in different spectral domains. We analyze two very different recent events with such phenomena and present an updated systematic view of solar events associated with negative bursts. Related filament eruptions can be normal, without essential changes of shape and magnetic configuration, and 'anomalous'. The latter are characterized by disintegration of an eruptive filament and dispersal of its remnants as a cloud o…
In this paper we present a topological magnetic field investigation of seven two-ribbon flares in sigmoidal active regions observed with Hinode, STEREO, and SDO. We first derive the 3D coronal magnetic field structure of all regions using marginally unstable 3D coronal magnetic field models created with the flux rope insertion method. The unstable models have been shown to be a good model of the flaring magnetic field configurations. Regions are selected based on their pre-flare configurations along with the appearance and observational coverage of flare ribbons, and the model is constrained u…
We analyze a confined multiple-ribbon M2.1 flare (SOL2015-01-29T11:42) that originated from a fan-spine coronal magnetic field configuration, within active region NOAA 12268. The observed ribbons form in two steps. First, two primary ribbons form at the main flare site, followed by the formation of secondary ribbons at remote locations. We observe a number of plasma flows at extreme-ultraviolet temperatures during the early phase of the flare (as early as 15 min before the onset) propagating towards the formation site of the secondary ribbons. The secondary ribbon formation is co-temporal with…
We report on observations of conversion of bright filament strands into flare loops during 2012 August 31 filament eruption. Prior to the eruption, individual bright strands composing one of the legs of the filament were observed in the 171 A filter channel data of the Atmospheric Imaging Assembly. After the onset of the eruption, one of the hooked ribbons started to propagate and contract, sweeping footpoints of the bright filament strands as well as coronal loops located close by. Later on, hot flare loops appeared in regions swept by the hook, where the filament strands were rooted. Timing …
We present the first observation of a solar filament formed by magnetic reconnection and associated chromospheric evaporation and subsequent coronal condensation. Driven by shearing motion during flux emergence, a sequential tether-cutting reconnection processes occurred and resulted in an M1.3 confined flare accompany with the formation of a sigmoid structure. It is found that the flare had a conjugate compact footpoint brightenings, which correspond to the footpoints of the sigmoid. Furthermore, observational evidence of explosive evaporation is well diagnosed at the conjugate footpoint brig…
A magnetic flux rope structure is believed to exist in most coronal mass ejections (CMEs). However, it has been long debated whether the flux rope exists before eruption or is formed during eruption via magnetic reconnection. The controversy has been continuing because of our lack of routine measurements of the magnetic field in the pre-eruption structure, such as solar filaments. However, recently an indirect method was proposed to infer the magnetic field configuration based on the sign of helicity and the bearing direction of the filament barbs. In this paper, we apply this method to two er…
We study the formation and evolution of a failed filament eruption observed in NOAA active region 11121 near the southeast limb on November 6, 2010. We use a time series of SDO/AIA 304, 171, 131, 193, 335, 94 Å images, SDO/HMI magnetograms, plus ROSA and ISOON Hαimages, to study the erupting active region. We identify coronal loop arcades associated with a quadrupolar magnetic configuration, and show that the expansion and cancelation of the central loop arcade system over the filament is followed by the eruption of the filament. The erupting filament reveals a clear helical twist and develops…
Coronal mass ejections (CMEs) play a decisive role in driving space weather, especially, the fast ones (e.g., with speeds above $800$~km~s$^{-1}$). Understanding the trigger mechanisms of fast CMEs can help us gaining important information in forecasting them. The filament eruptions accompanied with CMEs provide a good tracer in studying the early evolution of CMEs. Here we surveyed 66 filament-accompanied fast CMEs to analyse the correlation between the trigger mechanisms, namely either magnetic reconnection or ideal MHD process, associated flares, and CME speeds. Based on the data gathering …
Quiescent filaments are usually affected by internal and/or external perturbations triggering oscillations of different kinds. In particular, external large-scale coronal waves can perturb remote quiescent filaments leading to large-amplitude oscillations. Observational reports have indicated that the activation time of oscillations coincides with the passage of a large-scale coronal wavefront through the filament, although the disturbing wave is not always easily detected. Aiming to contribute to understand how -- and to what extent -- coronal waves are able to excite filament oscillations, h…
Solar filaments are an intriguing phenomenon, like cool clouds suspended in the hot corona. Similar structures exist in the intergalactic medium as well. Despite being a long-studied topic, solar filaments have continually attracted intensive attention because of their link to the coronal heating, coronal seismology, solar flares, and coronal mass ejections (CMEs). In this review paper, by combing through the solar filament-related work done in the past decade, we discuss several controversial topics, such as the fine structures, dynamics, magnetic configurations, and helicity of filaments. Wi…
Solar filament are commonly thought to be supported in magnetic dips, in particular, of magnetic flux ropes (FRs). In this Letter, from the observed photospheric vector magnetogram, we implement a nonlinear force-free field (NLFFF) extrapolation of a coronal magnetic FR that supports a large-scale intermediate filament between an active region and a weak polarity region. This result is the first in that current NLFFF extrapolations with presence of FRs are limited to relatively small-scale filaments that are close to sunspots and along main polarity inversion line (PIL) with strong transverse …
With the launch of SDO, many EUV waves were observed during solar eruptions. However, the joint observations of Moreton and EUV waves are still relatively rare. We present an event that a small-scale filament eruption simultaneously results in a Moreton wave, an EUV wave and a Coronal Mass Ejection in active region NOAA 12740. Firstly, we find that some dark elongate lanes or filamentary structures in the photosphere existed under the small-scale filament and drifted downward, which manifests that the small-scale filament was emerging and lifting from subsurface. Secondly, combining the simult…
We study an eruptive X1.1 circular-ribbon flare on 2013 November 10, combining multiwavelength observations with a coronal field reconstruction using a non-force-free field method. In the first stage, a filament forms via magnetic reconnection between two mildly twisted sheared arcades, which are embedded under the fan dome associated with a null point. This reconnection seems to be driven by photospheric shearing and converging flows around the inner two arcade footpoints, consistent with the flare-related changes of transverse field. The southern portion of the filament rises upward due to t…
By using H$α$, He I 10830, EUV and soft X-ray (SXR) data, we examined a filament eruption that occurred on a quiet-sun region near the center of the solar disk on 2006 January 12, which disturbed a sigmoid overlying the filament channel observed by the $\emph{GOES-12}$ SXR Imager (SXI), and led to the eruption of the sigmoid. The event was associated with a partial halo coronal mass ejection (CME) observed by the Large Angle and Spectrometric Coronagraphs (LASCO) on board the Solar and Heliospheric Observatory ($\emph{SOHO}$), and resulted in the formation of two flare-like ribbons, post-erupt…
In the past, there have been many studies claiming that the effects of geomagnetic storms strongly depends on the orientation of the magnetic-cloud part of the Coronal Mass Ejections (CMEs). Aparna & Martens (2020), using Halo-CME data from 2007-2017, have shown that the magnetic field orientation of filaments at the location where CMEs originate can be effectively used for predicting the onset of geo-magnetic storms. The purpose of this study is to extend their survey by analyzing the halo-CME data for 1996-2006. The correlation of filament axial direction and their corresponding Bz signature…
Coronal magnetic null points exist in abundance as demonstrated by extrapolations of the coronal field, and have been inferred to be important for a broad range of energetic events. These null points and their associated separatrix and spine field lines represent discontinuities of the field line mapping, making them preferential locations for reconnection. This field line mapping also exhibits strong gradients adjacent to the separatrix (fan) and spine field lines, that can be analysed using the `squashing factor', $Q$. In this paper we make a detailed analysis of the distribution of $Q$ in t…
Supersonic flows observed by THEMIS related to a coronal bright point and filament
Kumaun University（库马翁大学）；Observatoire de Paris, Université PSL, CNRS, Sorbonne Université, Université Paris Cité（巴黎天文台，巴黎文理研究大学，法国国家科学研究中心，索邦大学，巴黎西岱大学）；KU Leuven（荷语鲁汶大学）；University of Glasgow（格拉斯哥大学）；LUNEX EMMESI Institut（LUNEX EMMESI研究所）；University of Oslo（奥斯陆大学）；University of Maria Curie-Skłodowska（玛丽亚·居里-斯可洛多夫斯卡大学）
A solar jet on 2014 July 31, which was accompanied by a GOES C1.3 flare and a mini-filament eruption at the jet base, was studied by using observations taken by the New Vacuum Solar Telescope and the Solar Dynamic Observatory. Magnetic field extrapolation revealed that the jet was confined in a fan-spine magnetic system that hosts a null point at the height of about 9 Mm from the solar surface. An inner flare ribbon surrounded by an outer circular ribbon and a remote ribbon were observed to be associated with the eruption, in which the inner and remote ribbons respectively located at the footp…
The X-3.4 class flare of 13 December 2006 was observed with a high cadence of 2 minutes at 0.2 arc-sec resolution by HINODE/SOT FG instrument. The flare ribbons could be seen in G-band images also. A careful analysis of these observations after proper registration of images show flare related changes in penumbral filaments of the associated sunspot, for the first time. The observations of sunspot deformation, decay of penumbral area and changes in magnetic flux during large flares have been reported earlier in the literature. In this Letter, we report lateral motion of the penumbral filaments …
Solar filaments/prominences are one of the most common features in the corona, which may lead to energetic coronal mass ejections (CMEs) and flares when they erupt. Filaments are about one hundred times cooler and denser than the coronal material, and physical understanding of their material origin remains controversial. Two types of scenarios have been proposed: one argues that the filament plasma is brought into the corona from photosphere or chromosphere through a siphon or evaporation/injection process, while the other suggests that the material condenses from the surrounding coronal plasm…
We present observations of a failed eruption of a magnetic flux rope recorded during the M6.2 flare of 14 July 2004. The observations were mainly made with TRACE 171 Å and 1600 Å filters. The flare was accompanied by a destabilization of a magnetic structure observed as a filament eruption. After an initial acceleration the eruption slowed down and finally was stopped by the overlying coronal loops. The observations suggest that the whole event is well described by the quadrupole model of a solar flare. The failed eruption stretched the loops lying above and then they were observed oscillating…
