A broadband opto-mechanical phase shifter for photonic integrated circuits is proposed and numerically investigated. The structure consists of a mode-carrying waveguide and a deformable non-mode-carrying nanostring, which are parallel with each other. Utilizing the optical gradient force between them, the nanostring can be deflected. Thus the effective refractive indices of the waveguide is changed with the deformation, and further causes a phase shift. The phase shift under different geometry sizes, launched powers and boundary conditions are calculated and the dynamical properties as well as the thermal noise's effect are also discussed. It is demonstrated that a $π$ phase shift can be realized with only about 0.64 mW launched power and 50 $μm$ long nanostring. The proposed phase shifter may find potential usage in future investigation of photonic integrated circuits.
We propose the use of silicon graphene waveguides to implement a tunable broadband microwave photonics phase shifte based on integrated ring cavities. Numerical computation results show the feasibility for broadband operation over 40 GHz bandwidth and full 360 degree radiofrequency phase-shift with a modest voltage excursion of 0.12 volt.
Optical phase shifters are extensively used in integrated optics not only for telecom and datacom applications, but also for sensors and quantum computing. While various active solutions have been demonstrated, progress in passive phase shifters is still lacking. Here, we present a new type of ultra-broadband 90° phase shifter, which exploits the anisotropy and dispersion engineering in subwavelength metamaterial waveguides. Our Floquet-Bloch calculations predict a phase shift error below $\pm$1.7° over an unprecedented operation range from 1.35 $μ$m to 1.75 $μ$m, i.e. 400 nm bandwidth coverin…
Integrated silicon microwave photonics offers great potential in microwave phase shifter elements, and promises compact and scalable multi-element chips that are free from electromagnetic interference. Stimulated Brillouin scattering, which was recently demonstrated in silicon, is a particularly powerful approach to induce a phase shift due to its inherent flexibility, offering an optically controllable and selective phase shift. However, to date, only moderate amounts of Brillouin gain has been achieved and theoretically this would restrict the phase shift to a few tens of degrees, significan…
Nulling interferometry is one of the most promising technologies for imaging exoplanets within stellar habitable zones. The use of photonics for carrying out nulling interferometry enables the contrast and separation required for exoplanet detection. So far, two key issues limiting current-generation photonic nullers have been identified: phase variations and chromaticity within the beam combiner. The use of tricouplers addresses both limitations, delivering a broadband, achromatic null together with phase measurements for fringe tracking. Here, we present a derivation of the transfer matrix o…
We demonstrate an optomechanical phase shifter. By electrostatically deflecting the nanofabricated mechanical structure, the effective index of a nearby waveguide is changed and the resulting phase shift is measured using an integrated Mach-Zehnder interferometer. Comparing to thermo-optical phase shifters, our device does not consume power in static operation and also it can operate over large frequency, wavelength, and power ranges. Operation in the MHz range and sub-$μ$s pulses are demonstrated.
We demonstrate broadband tuning of an optomechanical microcavity optical resonance by exploring the large optomechanical coupling of a double-wheel microcavity and its uniquely low mechanical stiffness. Using a pump laser with only 13 mW at telecom wavelengths we show tuning of the silicon nitride microcavity resonances over 32 nm. This corresponds to a tuning power efficiency of only 400 $μ$W/nm. By choosing a relatively low optical Q resonance ($\approx$18,000) we prevent the cavity from reaching the regime of regenerative optomechanical oscillations. The static mechanical displacement induc…
We report a novel technique for launching broadband laser light into liquid-filled hollow-core photonic crystal fiber (HC-PCF). It uniquely offers self-alignment and self-stabilization via optomechanical trapping of a fused silica nanospike, fabricated by thermally tapering and chemically etching a single mode fiber into a tip diameter of 350 nm. We show that a trapping laser, delivering ~300 mW at 1064 nm, can be used to optically align and stably maintain the nanospike at the core center. Once this is done, a broadband supercontinuum beam (~575 to 1064 nm) can be efficiently and close to ach…
We demonstrate broad-band reconfiguration of coupled photonic crystal nanobeam cavities by using optical gradient force induced mechanical actuation. Propagating waveguide modes that exist over wide wavelength range are used to actuate the structures and in that way control the resonance of localized cavity mode. Using this all-optical approach, more than 18 linewidths of tuning range is demonstrated. Using on-chip temperature self-referencing method that we developed, we determined that 20 % of the total tuning was due to optomechanical reconfiguration and the rest due to thermo-optic effects…
Here, we demonstrate a spectrally broadband, GHz-fast Mach-Zehnder interferometeric modulator, exhibiting a miniscule VpL of 95 V-um, deploying a sub-wavelength short electrostatically tunable plasmonic phase-shifter, based on heterogeneously integrated ITO thin films into silicon photonics.
Non-reciprocal devices, such as circulators and isolators, are indispensable components in classical and quantum information processing in an integrated photonic circuit. Aside from those applications, the non-reciprocal phase shift is of fundamental interest for exploring exotic topological photonics, such as the realization of chiral edge states and topological protection. However, incorporating low optical-loss magnetic materials into a photonic chip is technically challenging. In this study, we experimentally demonstrate non-magnetic non-reciprocity using optomechanical interactions in a w…
Integrated robust universal linear optics based on white-boxed multi-plane light conversion
University of Science and Technology of China（中国科学技术大学）；Anhui Province Key Laboratory of Quantum Network（安徽省量子通信网络重点实验室）；Hefei National Laboratory（合肥国家实验室）；Hefei Guizhen Chip Technologies Co., Ltd.（合肥贵阵芯片技术有限公司）
As shown in the early 1960s, the gain in stimulated Raman scattering (SRS) is drastically suppressed when the rate of creation of phonons (via pump-to-Stokes conversion) is exactly balanced by the rate of phonon annihilation (via pump-to-anti-Stokes conversion). This occurs when the phonon coherence waves synchronized vibrations of a large population of molecules have identical propagation constants for both processes, i.e., they are phase-velocity matched. As recently demonstrated, hydrogen-filled photonic crystal fiber pumped in the vicinity of its zero dispersion wavelength provides an idea…
Diamond offers unique material advantages for the realization of micro- and nanomechanical resonators due to its high Young's modulus, compatibility with harsh environments and superior thermal properties. At the same time, the wide electronic bandgap of 5.45eV makes diamond a suitable material for integrated optics because of broadband transparency and the absence of free-carrier absorption commonly encountered in silicon photonics. Here we take advantage of both to engineer full-scale optomechanical circuits in diamond thin films. We show that polycrystalline diamond films fabricated by chem…
Breaking the symmetry between forward and backward propagating optical modes is of fundamental scientific interest and enables crucial functionalities, such as isolators, circulators, and duplex communication systems. Whereas there has been progress in achieving optical isolation on-chip, integrated broadband non-reciprocal signal processing functionalities that enable transmitting and receiving via the same low-loss planar waveguide, without altering the frequency or mode of the signal, remain elusive. Here, we demonstrate a non-reciprocal delay scheme based on the uni-directional transfer of…
Advances in integrated photonics open exciting opportunities for batch-fabricated optical sensors using high quality factor nanophotonic cavities to achieve ultra-high sensitivities and bandwidths. The sensitivity improves with higher optical power, however, localized absorption and heating within a micrometer-scale mode volume prominently distorts the cavity resonances and strongly couples the sensor response to thermal dynamics, limiting the sensitivity and hindering the measurement of broadband time-dependent signals. Here, we derive a frequency-dependent photonic sensor transfer function t…
Monolithic Integration of Piezo-Optomechanical Photonics and CMOS Electronics
The MITRE Corporation（MITRE公司）；Electrical, Computer, and Energy Engineering, University of Colorado Boulder（科罗拉多大学博尔德分校电气、计算机和能源工程学院）；Sandia National Laboratories（桑迪亚国家实验室）；Wyant College of Optical Sciences, University of Arizona（亚利桑那大学怀恩特光学科学学院）；Research Laboratory of Electronics, Massachusetts Institute of Technology（麻省理工学院电子研究实验室）
Visible-wavelength very large-scale integration (VLSI) photonic circuits have potential to play important roles in quantum information and sensing technologies. The realization of scalable, high-speed, and low-loss photonic mesh circuits depends on reliable and well-engineered visible photonic components. Here we report a low-voltage optical phase shifter based on piezo-actuated mechanical cantilevers, fabricated on a CMOS compatible, 200 mm wafer-based visible photonics platform. We show linear phase and amplitude modulation with 6 V$_π$-cm in differential operation, -1.5 dB to -2 dB insertio…
Electro-optic modulators provide a key function in optical transceivers and increasingly in photonic programmable Application Specific Integrated Circuits (ASICs) for machine learning and signal processing. However, both foundry ready silicon based modulators and conventional material based devices utilizing Lithium niobate fall short in simultaneously providing high chip packaging density and fast speed. Current driven ITO based modulators have the potential to achieve both enabled by efficient light matter interactions. Here, we introduce micrometer compact Mach Zehnder Interferometer (MZI) …
We investigate the role of time delay in cold-damping optomechanics with multiple mechanical resonances. For instantaneous electronic response, it was recently shown in \textit{Phys. Rev. Lett. \textbf{123}, 203605 (2019)}, that a single feedback loop is sufficient to simultaneously remove thermal noise from many mechanical modes. While the intrinsic delayed response of the electronics can induce single mode and mutual heating between adjacent modes, we propose to counteract such detrimental effects by introducing an additional time delay to the feedback loop. For lossy cavities and broadband …
Up-to-date network telemetry is the key enabler for resource optimization by capacity scaling, fault recovery, and network reconfiguration among other means. Reliable optical performance monitoring in general and, specifically, the monitoring of the spectral profile of WDM signals in fixed- and flex- grid architectures across the entire C-band, remains challenging. This article describes a two-stage spectrometer architecture amenable to integration on a single chip that can measure quantitatively the spectrum across the entire C-band with a resolution of 1 GHz approximately. The first stage co…
Carbon nanomaterials such as carbon nanotubes and graphene have proved to be efficient building blocks for active optoelectronic devices. Especially, the exotic properties of crystalline graphene, such as a linear/gapless energy dispersion, offer a generic route to the development of active photonic modulator at the infrared (IR) and terahertz (THz) regime with large modulation depth. Here, we show that graphene oxide (GO), an oxygenated derivative of graphene with randomly distributed molecular defects (e.g., adsorbed water molecules and punched holes), can provide a different way to effectiv…
The functionalities of a wide range of optical and opto-electronic devices are based on resonance effects and active tuning of the amplitude and wavelength response is often essential. Plasmonic nanostructures are an efficient way to create optical resonances, a prominent example is the extraordinary optical transmission (EOT) through arrays of nanoholes patterned in a metallic film. Tuning of resonances by heating, applying electrical or optical signals has proven to be more elusive, due to the lack of materials that can induce modulation over a broad spectral range and/or at high speeds. Her…
Photonic lanterns allow the decomposition of highly multimodal light into a simplified modal basis such as single-moded and/or few-moded. They are increasingly finding uses in astronomy, optics and telecommunications. Calculating propagation through a photonic lantern using traditional algorithms takes $\sim 1$ hour per simulation on a modern CPU. This paper demonstrates that neural networks can bridge the disparate opto-electronic systems, and when trained can achieve a speed-up of over 5 orders of magnitude. We show that this approach can be used to model photonic lanterns with manufacturing…
Emerging technologies based on tailorable interactions between photons and phonons promise new capabilities ranging from high-fidelity microwave signal processing to non-reciprocal optics and quantum state control. While such light-sound couplings have been studied in a variety of physical systems, many implementations rely on non-standard materials and fabrication schemes that are challenging to co-implement with standard integrated photonic circuitry. Notably, despite significant advances in integrated electro-optic modulators, related acousto-optic modulator concepts have remained relativel…
Visible and near-infrared spectrum photonic integrated circuits are quickly becoming a key technology to address the scaling challenges in quantum information and biosensing. Thus far, integrated photonic platforms in this spectral range have lacked integrated photodetectors. Here, we report the first silicon nitride-on-silicon waveguide photodetectors that are monolithically integrated in a visible light photonic platform on silicon. Owing to a leaky-wave silicon nitride-on-silicon design, the devices achieved a high external quantum efficiency of > 60% across a record wavelength span from $λ…
Component errors limit the scaling of programmable coherent photonic circuits. These errors arise because the standard tunable photonic coupler -- the Mach-Zehnder interferometer (MZI) -- cannot be perfectly programmed to the cross state. Here, we introduce two modified circuit architectures that overcome this limitation: (1) a 3-splitter MZI mesh for generic errors, and (2) a broadband MZI+Crossing design for correlated errors. Because these designs allow for perfect realization of the cross state, the matrix fidelity no longer decreases with mesh size, allowing scaling to arbitrarily large m…
Densely integrated active photonics is key for next generation on-chip networks for addressing both footprint and energy budget concerns. However, the weak light-matter interaction in traditional active Silicon optoelectronics mandates rather sizable device lengths. The ideal active material choice should avail high index modulation while being easily integrated into Silicon photonics platforms. Indium tin oxide (ITO) offers such functionalities and has shown promising modulation capacity recently. Interestingly, the nanometer-thin unity-strong index modulation of ITO synergistically combines …
Recent advances in photonic integrated circuits (PICs) have enabled a new generation of "programmable many-mode interferometers" (PMMIs) realized by cascaded Mach Zehnder Interferometers (MZIs) capable of universal linear-optical transformations on N input-output optical modes. PMMIs serve critical functions in photonic quantum information processing, quantum-enhanced sensor networks, machine learning and other applications. However, PMMI implementations reported to date rely on thermo-optic phase shifters, which limit applications due to slow response times and high power consumption. Here, w…
Carbon based optoelectronic devices promise to revolutionize modern integrated circuits by combining outstanding electrical and optical properties into a unified technology. By coupling nanoelectronic devices to nanophotonic structures functional components such as nanoscale light emitting diodes, narrow-band thermal emitters, cavity controlled detectors and wideband electro optic modulators can be realized for chipscale information processing. These devices not only allow the light-matter interaction of low-dimensional systems to be studied, but also provide fundamental building blocks for hi…
Color-center defects in silicon carbide promise opto-electronic quantum applications in several fields, such as computing, sensing and communication. In order to scale down and combine these functionalities with the existing silicon device platforms, it is crucial to consider SiC integrated optics. In recent years many examples of SiC photonic platforms have been shown, like photonic crystal cavities, film-on-insulator waveguides and micro-ring resonators. However, all these examples rely on separating thin films of SiC from substrate wafers. This introduces significant surface roughness, stra…
