In this paper, we propose an analog network coding scheme with differential modulation (ANC-DM) using amplify-and-forward protocol for bidirectional relay networks when neither the source nodes nor the relay knows the channel state information (CSI). The performance of the proposed ANC-DM scheme is analyzed and a simple asymptotic bit error rate (BER) expression is derived. The analytical results are verified through simulations. It is shown that the BER performance of the proposed differential scheme is about 3 dB away from that of the coherent detection scheme. To improve the system performance, the optimum power allocation between the sources and the relay is determined based on the simplified BER. Simulation results indicate that the proposed differential scheme with optimum power allocation yields 1-2 dB performance improvement over an equal power allocation scheme.
In this paper, we consider joint network and LDPC coding for practically implementing the denosie-and-forward protocol over bi-directional relaying. the closed-form expressions for computing the log-likelihood ratios of the network-coded codewords have been derived for both real and complex multiple-access channels. It is revealed that the equivalent channel observed at the relay is an asymmetrical channel, where the channel input is the XOR form of the two source nodes.
In a bi-directional relay channel, two nodes wish to exchange independent messages over a shared wireless half-duplex channel with the help of a relay. In this paper, we derive achievable rate regions for four new half-duplex protocols and compare these to four existing half-duplex protocols and outer bounds. In time, our protocols consist of either two or three phases. In the two phase protocols, both users simultaneously transmit during the first phase and the relay alone transmits during the second phase, while in the three phase protocol the two users sequentially transmit followed by a tr…
In this paper we study decode-and-forward multi-antenna relay systems that achieve bi-directional communication in two time slots. We investigate different downlink broadcast schemes which employ binary or analog network coding at the relay. We also analyze and compare their performances in terms of diversity order and symbol error probability. It is shown that if exact downlink channel state information is available at the relay, using analog network coding in the form of multi-antenna maximal-ratio transmit beamforming to precode the information vectors at the relay gives the best performanc…
Secure wireless information and power transfer based on directional modulation is conceived for amplify-and-forward (AF) relaying networks. Explicitly, we first formulate a secrecy rate maximization (SRM) problem, which can be decomposed into a twin-level optimization problem and solved by a one-dimensional (1D) search and semidefinite relaxation (SDR) technique. Then in order to reduce the search complexity, we formulate an optimization problem based on maximizing the signal-to-leakage-AN-noise-ratio (Max-SLANR) criterion, and transform it into a SDR problem. Additionally, the relaxation is p…
In this paper, iterative differential phase-shift keying (DPSK) demodulation and channel decoding scheme is investigated for the Joint Channel decoding and physical layer Network Coding (JCNC) approach in two-way relaying systems. The Bahl, Cocke, Jelinek, and Raviv (BCJR) algorithm for both coherent and noncoherent detection is derived for soft-in soft-out decoding of DPSK signalling over the two-user multiple-access channel with Rayleigh fading. Then, we propose a pragmatic approach with the JCNC scheme for iteratively exploiting the extrinsic information of the outer code. With coherent det…
In practical asynchronous bi-directional relaying, symbols transmitted by two sources cannot arrive at the relay with perfect frame and symbol alignments and the asynchronous multiple-access channel (MAC) should be seriously considered. Recently, Lu et al. proposed a Tanner-graph representation of the symbol-asynchronous MAC with rectangular-pulse shaping and further developed the message-passing algorithm for optimal decoding of the symbol-asynchronous physical-layer network coding. In this paper, we present a general channel model for the asynchronous MAC with arbitrary pulse-shaping. Then, …
In a bi-directional relay channel, two nodes wish to exchange independent messages over a shared wireless half-duplex channel with the help of relays. Recent work has considered information theoretic limits of the bi-directional relay channel with a single relay. In this work we consider bi-directional relaying with multiple relays. We derive achievable rate regions and outer bounds for half-duplex protocols with multiple decode and forward relays and compare these to the same protocols with amplify and forward relays in an additive white Gaussian noise channel. We consider three novel classes…
We consider a communication system where two transmitters wish to exchange information through a half-duplex relay in the middle. The channels between the transmitters and the relay have asymmetric channel gains. More specifically, the channels are assumed to be synchronized with complex inputs and complex fading coefficients with an average power constraint on the inputs to the channels. The noise at the receivers have the same power spectral density and are assumed to be white and Gaussian. We restrict our attention to transmission schemes where information from the two nodes are simultaneou…
We consider the problem of two transmitters wishing to exchange information through a relay in the middle. The channels between the transmitters and the relay are assumed to be synchronized, average power constrained additive white Gaussian noise channels with a real input with signal-to-noise ratio (SNR) of snr. An upper bound on the capacity is 1/2 log(1+ snr) bits per transmitter per use of the medium-access phase and broadcast phase of the bi-directional relay channel. We show that using lattice codes and lattice decoding, we can obtain a rate of 1/2 log(0.5 + snr) bits per transmitter, wh…
In this paper, we study the two-way relay channel with energy harvesting nodes. In particular, we find transmission policies that maximize the sum-throughput for two-way relay channels when the relay does not employ a data buffer. The relay can perform decode-and-forward, compress-and-forward, compute-and-forward or amplify-and-forward relaying. Furthermore, we consider throughput improvement by dynamically choosing relaying strategies, resulting in hybrid relaying strategies. We show that an iterative generalized directional water-filling algorithm solves the offline throughput maximization p…
In this paper, we investigate the joint design of channel and network coding in bi-directional relaying systems and propose a combined low complexity physical network coding and LDPC decoding scheme. For the same LDPC codes employed at both source nodes, we show that the relay can decodes the network coded codewords from the superimposed signal received from the BPSK-modulated multiple-access channel. Simulation results shown that this novel joint physical network coding and LDPC decoding method outperforms the existing MMSE network coding and LDPC decoding method over AWGN and complex MAC cha…
Massive multiple-input multiple-output (MIMO) relaying is a promising technological paradigm which can offer high spectral efficiency and substantially improved coverage. Yet, these configurations face some formidable challenges in terms of digital signal processing (DSP) power consumption and circuitry complexity, since the number of radio frequency (RF) chains may scale with the number of antennas at the relay station. In this paper, we advocate that performing a portion of the power-intensive DSP in the analog domain, using simple phase shifters and with a reduced number of RF paths, can ad…
Wireless systems that carry delay-sensitive information (such as speech and/or video signals) typically transmit with fixed data rates, but may occasionally suffer from transmission outages caused by the random nature of the fading channels. If the transmitter has instantaneous channel state information (CSI) available, it can compensate for a significant portion of these outages by utilizing power allocation. In a conventional dual-hop bidirectional amplify-and-forward (AF) relaying system, the relay already has instantaneous CSI of both links available, as this is required for relay gain adj…
This letter studies bi-directional secure information exchange in a simultaneous wireless information and power transfer (SWIPT) system enabled by a full-duplex (FD) multiple-input multiple-output (MIMO) amplify-and-forward (AF) relay. The AF relay injects artificial noise (AN) in order to confuse the eavesdropper. Specifically, we assume a zeroforcing (ZF) solution constraint to eliminate the residual self-interference (RSI). As a consequence, we address the optimal joint design of the ZF matrix and the AN covariance matrix at the relay node as well as the transmit power at the sources. We pr…
This paper studies a full-duplex filter-and-forward (FD-FF) relay system in frequency-selective channels. Conventionally, the loop-back signal at the FD relay is treated as harmful self-interference and needs to be significantly suppressed via both analog- and digital-domain cancellation. However, the performance of the conventional self-interference cancellation approach is fundamentally limited due to the quantization error induced by the analog-to-digital converter (ADC) with limited dynamic range. In this paper, we consider an analog filter-and-forward design to help avoid the quantization…
In this paper, we propose a relay selection amplify-and-forward (RS-AF) protocol in general bi-directional relay networks with two sources and $N$ relays. In the proposed scheme, the two sources first transmit to all the relays simultaneously, and then a single relay with a minimum sum symbol error rate (SER) will be selected to broadcast the received signals back to both sources. To facilitate the selection process, we propose a simple sub-optimal Min-Max criterion for relay selection, where a single relay which minimizes the maximum SER of two source nodes will be selected. Simulation result…
Analog Network Coding (ANC) is proposed in literature to improve the network throughput by exploiting channel diversity. In practical scenarios, due to the difference in channel characteristics, an extra residual component, termed as ANC noise, appears during the processing of the received signal. This ANC noise component may suppress the ANC gain. None of the existing literature to our knowledge considers the effect of spatial correlation among channels on ANC noise. This paper develops a generic framework to investigate the effect of channel characteristics on ANC noise. We have modelled the…
High power consumption and expensive hardware are two bottlenecks for practical massive multiple-input multiple-output (mMIMO) systems. One promising solution is to employ low-resolution analog-to-digital converters (ADCs) and digital-to-analog converters (DACs). In this paper, we consider a general multipair mMIMO relaying system with a mixed-ADC/DAC architecture, in which some antennas are connected to low-resolution ADCs/DACs, while the rest of the antennas are connected to high-resolution ADCs/DACs. Leveraging on the additive quantization noise model, both exact and approximate closed-form…
In this paper, we consider a two-hop molecular communication network consisting of one nanotransmitter, one nanoreceiver, and one nanotransceiver acting as a relay. We consider two different schemes for relaying to improve the range of diffusion-based molecular communication. In the first scheme, two different types of messenger molecules are utilized at the relay node for transmission and detection. In the second scheme, we assume that there is only one type of molecule available to be used as an information carrier. We identify self-interference as the performance-limiting effect for the sec…
Massive multiple-input multiple-output (MIMO) avails of simple transceiver design which can tackle many drawbacks of relay systems in terms of complicated signal processing, latency, and noise amplification. However, the cost and circuit complexity of having one radio frequency (RF) chain dedicated to each antenna element are prohibitive in practice. In this paper, we address this critical issue in amplify-and-forward (AF) relay systems using a hybrid analog and digital (A/D) transceiver structure. More specifically, leveraging the channel long-term properties, we design the analog beamformer …
This paper considers an interference network composed of K half-duplex single-antenna pairs of users who wish to establish bi-directional communication with the aid of a multi-input-multi-output (MIMO) half-duplex relay node. This channel is referred to as the "MIMO Wireless Switch" since, for the sake of simplicity, our model assumes no direct link between the two end nodes of each pair implying that all communication must go through the relay node (i.e., the MIMO switch). Assuming a delay-limited scenario, the fundamental limits in the high signal-to-noise ratio (SNR) regime is analyzed usin…
In a bi-directional relay channel, a pair of nodes wish to exchange independent messages over a shared wireless half-duplex channel with the help of relays. Recent work has mostly considered information theoretic limits of the bi-directional relay channel with two terminal nodes (or end users) and one relay. In this work we consider bi-directional relaying with one base station, multiple terminal nodes and one relay, all of which operate in half-duplex modes. We assume that each terminal node communicates with the base-station in a bi-directional fashion through the relay and do not place any …
In this paper, we consider a multi-hop molecular communication network consisting of one nanotransmitter, one nanoreceiver, and multiple nanotransceivers acting as relays. We consider three different relaying schemes to improve the range of diffusion-based molecular communication. In the first scheme, different types of messenger molecules are utilized in each hop of the multi-hop network. In the second and third scheme, we assume that two types of molecules and one type of molecule are utilized in the network, respectively. We identify self-interference, backward intersymbol interference (bac…
The radio frequency (RF) phase shifter with finite quantization bits in analog beamforming (AB) structure forms quantization error (QE) and causes a performance loss of received signal to interference plus noise ratio (SINR) at the receiver (called Bob). By using the law of large numbers in probability theory, the closed-form expression of SINR performance loss is derived to be inversely proportional to the square of sinc (or sin(x)/x) function. Here, a phase alignment method is applied in directional modulation transmitter with AB structure. Also, the secrecy rate (SR) expression is derived w…
A hybrid analog-digital combiner for broadcast vehicular communication is proposed. It has an analog part that does not require any channel state information or feedback from the receiver, and a digital part that uses maximal ratio combining (MRC). We focus on designing the analog part of the combiner to optimize the received signal strength along all azimuth angles for robust periodic vehicle-to-vehicle (V2V) communication, in a scenario of one dominant component between the communicating vehicles (e.g., highway scenario). We show that the parameters of a previously suggested fully analog com…
In practical asynchronous bi-directional relaying, symbols transmitted by two source nodes cannot arrive at the relay with perfect symbol alignment and the symbol-asynchronous multiple-access channel (MAC) should be seriously considered. Recently, Lu et al. proposed a Tanner-graph representation of symbol-asynchronous MAC with rectangular-pulse shaping and further developed the message-passing algorithm for optimal decoding of the asynchronous physical-layer network coding. In this paper, we present a general channel model for the asynchronous multiple-access channel with arbitrary pulse-shapi…
A novel channel representation for a two-hop decentralized wireless relay network (DWRN) is proposed, where the relays operate in a completely distributive fashion. The modeling paradigm applies an analogous approach to the description method for a double-directional multipath propagation channel, and takes into account the finite system spatial resolution and the extended relay listening/transmitting time. Specifically, the double-directional information azimuth spectrum (IAS) is formulated to provide a compact representation of information flows in a DWRN. The proposed channel representation…
The acute disparity between increasing bandwidth demand and available spectrum, has brought millimeter wave (mmW) bands to the forefront of candidate solutions for the next-generation cellular networks. Highly directional transmissions are essential for cellular communication in these frequencies to compensate for high isotropic path loss. This reliance on directional beamforming, however, complicates initial cell search since the mobile and base station must jointly search over a potentially large angular directional space to locate a suitable path to initiate communication. To address this p…
This paper considers the coexistence of Ultra Reliable Low Latency Communications (URLLC) and enhanced Mobile BroadBand (eMBB) services in the uplink of Cloud Radio Access Network (C-RAN) architecture based on the relaying of radio signals over analog fronthaul links. While Orthogonal Multiple Access (OMA) to the radio resources enables the isolation and the separate design of different 5G services, Non-Orthogonal Multiple Access (NOMA) can enhance the system performance by sharing wireless and fronthaul resources. This paper provides an information-theoretic perspective in the performance of …
Energy harvesting (EH) has recently emerged as a promising technique for green communications. To realize its potential, communication protocols need to be redesigned to combat the randomness of the harvested energy. In this paper, we investigate how to apply relaying to improve the short-term performance of EH communication systems. With an EH source and a non-EH half-duplex relay, we consider two different design objectives: 1) short-term throughput maximization; and 2) transmission completion time minimization. Both problems are joint scheduling and power allocation problems, rendered quite…
Most of the indoor coverage issues arise from network deployments that are usually planned for outdoor scenarios. Moreover, the ever-growing number of devices with different Radio Access Technologies (RATs), expected for new 5G scenarios and to maintain compatibility with older cellular standards (mostly 3G/4G), worsen this situation thus calling for novel bandwidth-efficient, low-latency and cost-effective solutions for indoor coverage. To solve this problem, Centralized Radio Access Network (C-RAN) architectures have been proposed to provide dense and controlled coverage inside buildings. Ho…
Due to the heavy reliance of millimeter-wave (mmWave) wireless systems on directional links, beamforming (BF) with high-dimensional arrays is essential for cellular systems in these frequencies. How to perform the array processing in a power efficient manner is a fundamental challenge. Analog and hybrid BF require fewer analog-to-digital and digital-to-analog converters (ADCs and DACs), but can only communicate in a small number of directions at a time, limiting directional search, spatial multiplexing and control signaling. Digital BF enables flexible spatial processing, but must be operated …
A restricted two-way communication problem in a small fully-connected network is investigated. The network consists of three nodes, all having access to a common channel with half-duplex constraint. Two nodes want to establish a dialog while the third node can assist in the bi-directional transmission process. All nodes have agreed on a transmission protocol a priori and the problem is restricted to the dialog encoders not being allowed to establish a cooperation by the use of previous receive signals. The channel is referred to as the restricted half-duplex two-way relay channel. Here the cha…
Due to heavy reliance of millimeter-wave (mmWave) wireless systems on directional links, Beamforming (BF) with high-dimensional arrays is essential for cellular systems in these frequencies. How to perform the array processing in a power efficient manner is a fundamental challenge. Analog and hybrid BF require fewer analog-to-digital converters (ADCs), but can only communicate in a small number of directions at a time,limiting directional search, spatial multiplexing and control signaling. Digital BF enables flexible spatial processing, but must be operated at a low quantization resolution to …
In this paper, we consider a general bi-directional relay network with two sources and N relays when neither the source nodes nor the relays know the channel state information (CSI). A joint relay selection and analog network coding using differential modulation (RS-ANC-DM) is proposed. In the proposed scheme, the two sources employ differential modulations and transmit the differential modulated symbols to all relays at the same time. The signals received at the relay is a superposition of two transmitted symbols, which we call the analog network coded symbols. Then a single relay which has m…
