Single file translocation of a homopolymer through an active channel under the presence of a driving force is studied using Langevin dynamics simulation. It is shown that a channel with sticky walls and oscillating width could lead to significantly more efficient translocation as compared to a static channel that has a width equal to the mean width of the oscillating pore. The gain in translocation exhibits a strong dependence on the stickiness of the pore, which could allow the polymer translocation process to be highly selective.
We study the driven translocation of a flexible polymer through an interacting conical pore using Langevin dynamics simulations. We find that, for a fixed value of externally applied force and pore polymer interaction strength, the mean residence time of monomers inside the pore shows non-monotonic variations with pore apex angle $α$. We explain this behavior using a free energy argument by explicitly accounting for pore-polymer interactions and external drive. Our theoretical observations are corroborated by the simulation results of the mean translocation times as the pore-polymer interactio…
Force-driven translocation of a macromolecule through a nanopore is investigated by taking into account the monomer-pore friction as well as the "crowding" of monomers on the {\it trans} - side of the membrane which counterbalance the driving force acting in the pore. The set of governing differential-algebraic equations for the translocation dynamics is derived and solved numerically. The analysis of this solution shows that the crowding of monomers on the trans side hardly affects the dynamics, but the monomer-pore friction can substantially slow down the translocation process. Moreover, the…
We perform two-dimensional Langevin dynamics simulations of electric-field driven polymer translocation through an attractive nanopore. We investigate the effect of the location of the attractive region using different pore patterns. This is found to have an impact on both the translocation time as a function of the chain length and on the polymer entry frequency. We qualitatively compare our results to available experimental data.
We study the driven translocation of polymers under time-dependent driving forces using $N$-particle Langevin dynamics simulations. We consider the force to be either sinusoidally oscillating in time or dichotomic noise with exponential correlation time, to mimic both plausible experimental setups and naturally occurring biological conditions. In addition, we consider both the case of purely repulsive polymer-pore interactions and the case with additional attractive polymer-pore interactions, typically occurring inside biological pores. We find that the nature of the interaction fundamentally …
We investigate several scaling properties of a translocating homopolymer through a thin pore driven by an external field present inside the pore only using Langevin Dynamics (LD) simulation in three dimension (3D). Specifically motivated by several recent theoretical and numerical studies that are apparently at odds with each other, we determine the chain length dependence of the scaling exponents of the average translocation time, the average velocity of the center of mass, $<v_{CM}>$, the effective radius of gyration during the translocation process, and the scaling exponent of the transloca…
We construct a new statistical physical model of polymer translocation through a pore in a membrane treated as the diffusion process across a free energy barrier. We determine the translocation time in terms of chain flexibility yielding an entropic barrier, as well as in terms of the driving mechanisms such as transmembrane chemical potential difference and Brownian ratchets. It turns out that, while the chemical potential differences induce pronounced effects on translocation due to the long-chain nature of the polymer, the ratchets suppress this effect and chain flexibility.
We review recent progress on the theory of dynamics of polymer translocation through a nanopore based on the iso-flux tension propagation (IFTP) theory. We investigate both pore-driven translocation of flexible and a semi-flexible polymers, and the end-pulled case of flexible chains by means of the IFTP theory and extensive molecular dynamics (MD) simulations. The validity of the IFTP theory can be quantified by the waiting time distributions of the monomers which reveal the details of the dynamics of the translocation process. The IFTP theory allows a parameter-free description of the translo…
Polymer translocation experiments typically involve anionic polyelectrolytes such as DNA molecules driven through negatively charged nanopores. Quantitative modelling of polymer capture to the nanopore followed by translocation therefore necessitates the consideration of the electrostatic barrier resulting from like-charge polymer-pore interactions. To this end, in this work we couple mean-field level electrohydrodynamic equations with the Smoluchowski formalism to characterize the interplay between the electrostatic barrier, the electrophoretic drift, and the electro-osmotic liquid flow. In p…
The transport of biomolecules across a cell membrane is an important phenomena that plays a pivotal role in the functioning of biological cells. In this paper, we investigate such processes by modeling the translocation of polymers through a conical channel, directed from the wider opening to the narrow end of the conical channel. We use the molecular dynamics approach to study the problem. The effect of the different conical pore geometry and polymer lengths on translocation dynamics is determined from the behavior of the total translocation time, $τ$, and waiting time distributions, $w(s)$. …
We develop a theory for polymer translocation driven by a time-dependent force through an oscillating nanopore. To this end, we extend the iso-flux tension propagation theory (IFTP) [Sarabadani \textit{et al., J. Chem. Phys.}, 2014, \textbf{141}, 214907] for such a setup. We assume that the external driving force in the pore has a component oscillating in time, and the flickering pore is similarly described by an oscillating term in the pore friction. In addition to numerically solving the model, we derive analytical approximations that are in good agreement with the numerical simulations. Our…
We analyze the free energy for translocation of a polymer from the outside of a spherical vesicle to the inside. The process is assumed to be driven by the adsorption of the polymer on the inner surface of the vesicle. We argue that in the case where the polymer is adsorbed on the outer surface too, the entropic barrier for translocation is absent. We analyze the adsorption energy and find the free energy profile for the process. We argue that the motion corresponds to a polymer crossing a region with a change in free energy per segment. Based upon our earlier analsis of the behaviour of kinks…
We propose a method for the theoretical investigation of polymer translocation through composite pore structures possessing arbitrarily specified geometries. Translocation through each constituent part of the composite is treated as being analogous to the diffusion of the translocation coordinate over the free energy landscape derived from the chain configurations within the pore. The proposed method accounts for possible reverse motions of the leading chain end at the interface between constituent parts of a composite pore, a possibility that has been neglected in prior studies. As an illustr…
The efficiency of nanopore-based biosequencing techniques requires fast anionic polymer capture by like-charged pores followed by a prolonged translocation process. We show that this condition can be achieved by setting a pressure-solvation trap. Polyvalent cation addition to the KCl solution triggers the like-charge polymer-pore attraction. The attraction speeds-up the pressure-driven polymer capture but also traps the molecule at the pore exit, reducing the polymer capture time and extending the polymer escape time by several orders of magnitude. By direct comparison with translocation exper…
We investigate the influence of polymer-pore interactions on the translocation dynamics using Langevin dynamics simulations. An attractive interaction can greatly improve translocation probability. At the same time, it also increases translocation time slowly for weak attraction while exponential dependence is observed for strong attraction. For fixed driving force and chain length the histogram of translocation time has a transition from Gaussian distribution to long-tailed distribution with increasing attraction. Under a weak driving force and a strong attractive force, both the translocatio…
We employ a three-dimensional molecular dynamics to simulate translocation of a polymer through a nanopore driven by an external force. The translocation is investigated for different three pore diameter and two different external forces. In order to see the polymer and pore interaction effects on translocation time, we studied 9 different interaction energies. Moreover, to better understand the simulation results we investigate polymer center of mass, shape factor and the monomer distribution through the translocation. Our results unveil that while increasing the polymer-pore interaction ener…
We study the translocation of a semiflexible polymer through extended pores with patterned stickiness, using Langevin dynamics simulations. We find that the consequence of pore patterning on the translocation time dynamics is dramatic and depends strongly on the interplay of polymer stiffness and pore-polymer interactions. For heterogeneous polymers with periodically varying stiffness along their lengths, we find that variation of the block size of the sequences and the orientation, results in large variations in the translocation time distributions. We show how this fact may be utilized to de…
The theoretical formulation of driven polymer translocation through nanopores is complicated by the combination of the pore electrohydrodynamics and the nonequilibrium polymer dynamics originating from the conformational polymer fluctuations. In this review, we discuss the modeling of polymer translocation in the distinct regimes of short and long polymers where these two effects decouple. For the case of short polymers where polymer fluctuations are negligible, we present a stiff polymer model including the details of the electrohydrodynamic forces on the translocating molecule. We first show…
Brownian dynamics (BD) simulations are used to study the translocation dynamics of a coarse-grained polymer through a cylindrical nanopore. We consider the case of short polymers, with a polymer length, N, in the range N=21-61. The rate of translocation is controlled by a tunable friction coefficient, gamma_{0p}, for monomers inside the nanopore. In the case of unforced translocation, the mean translocation time scales with polymer length N as <tau_1>~ (N-N_p)^alpha, where N_p is the average number of monomers in the nanopore. The exponent approaches the value alpha=2 when the pore friction is…
Theoretical derivation and numerical confirmation are provided for the scaling of pore-blockade times as $N^{2+ν}$ for unbiased translocation in two and three dimensions, with $N$ as the polymer length and $ν$ as the Flory exponent of the polymer. The polymer performs Rouse dynamics.
The translocation of a Lipid Binding Protein (LBP) is studied using a phenomenological coarse-grained computational model that simplifies both chain and pore geometry. We investigated via molecular dynamics the interplay between transport and unfolding in the presence of a nanopore whose section oscillates periodically in time with a frequency omega, a motion often referred to as radial breathing mode (RBM). We found that the LPB when mechanically pulled into the vibrating nanopore exhibits a translocation dynamics that in some frequency range is accelerated and shows a frequency locking to th…
We develop a correlation-corrected transport theory in order to predict ionic and polymer transport properties of membrane nanopores in physical conditions where mean-field electrostatics breaks down. The experimentally observed low KCl conductivity of open alpha-Hemolysin pores is quantitatively explained by the presence of surface polarization effects. Upon the penetration of a DNA molecule into the pore, these polarization forces combined with the electroneutrality of DNA sets a lower boundary for the ionic current, explaining the weak salt dependence of blocked pore conductivities at dilut…
One of the most fundamental quantities associated with polymer translocation through a nanopore is the translocation time $τ$ and its dependence on the chain length $N$. Our simulation results based on both the bond fluctuation Monte Carlo and Molecular Dynamics methods confirm the original prediction $τ\sim N^{2ν+1}$, which scales in the same manner as the Rouse relaxation time of the chain except for a larger prefactor, and invalidates other scaling claims.
Polymer translocation through a nanopore in a membrane investigated theoretically. Recent experiments on voltage-driven DNA and RNA translocations through a nanopore indicate that the size and geometry of the pore are important factors in polymer dynamics. A theoretical approach is presented which explicitly takes into account the effect of the nanopore length and diameter for polymer motion across the membrane. It is shown that the length of the pore is crucial for polymer translocation dynamics. The present model predicts that for realistic conditions (long nanopores and large external field…
DNA translocation through nanopores is one of the most promising strategies for the next-generation sequencing technologies. Most part of experimental and numerical works has focused on polymer translocation biased by electrophoresis, where a pulling force acts on the polymer within the nanopore. An alternative strategy however is emerging, which uses optical or magnetic tweezers. In this case, the pulling force is exerted directly at one end of the polymer, which strongly modifies the translocation process. In this paper, we report numerical simulations of both linear and structured (mimickin…
We investigate the voltage-driven translocation of an inhomogeneously charged polymer through a nanopore by utilizing discrete and continuous stochastic models. As a simplified illustration of the effect of charge distribution on translocation, we consider the translocation of a polymer with a single charged site in the presence and absence of interactions between the charge and the pore. We find that the position of the charge that minimizes the translocation time in the absence of pore--polymer interactions is determined by the entropic cost of translocation, with the optimum charge position…
The optimal functioning of nanopore-based biosensing tools necessitates rapid polymer capture from the ion reservoir. We identify an ionic correlation-induced transport mechanism that provides this condition without the chemical modification of the polymer or the pore surface. In the typical experimental configuration where a negatively charged silicon-based pore confines a 1:1 electrolyte solution, anionic polymer capture is limited by electrostatic polymer-membrane repulsion and the electroosmotic (EO) flow. Added multivalent cations suppress the electrostatic barrier and revers the pore cha…
We show that the injection of polymer chains into nanochannels becomes easier as the channel becomes narrower. This counter intuitive result arises because of a decrease in the diffusive time scale of the chains with increasing confinement. The results are obtained by extending the de Gennes blob model of confined polymers, and confirmed by hybrid molecular dynamics - lattice-Boltzmann simulations.
Polymer translocation is a promising strategy for the next-generation DNA sequencing technologies. The use of biological and synthetic nano-pores, however, still suffers from serious drawbacks. In particular, the width of the membrane layer can accommodate several bases at the same time, making difficult accurate sequencing applications. More recently, the use of graphene membranes has paved the way to new sequencing capabilities, with the possibility to measure transverse currents, among other advances. The reduced thickness of these new membranes poses new questions on the effect of deformab…
We study the translocation process of a polymer in the absence of external fields for various pore diameters $b$ and membrane thickness $L$. The polymer performs Rouse and reptation dynamics. The mean translocation time $<τ_t>$ that the polymer needs to escape from a cell, and the mean dwell time $<τ_d>$ that the polymer spends in the pore during the translocation process, obey scaling relations in terms of the polymer length $N$, $L$ and $b/R_g$, where $R_g$ is the radius of gyration for the polymer. We explain these relations using simple arguments based on polymer dynamics and the equilibri…
We investigate the dynamics of polymer translocation through a nanopore using two-dimensional Langevin dynamics simulations. In the absence of external driving force, we consider a polymer which is initially placed in the middle of the pore and study the escape time $τ_e$ required for the polymer to completely exit the pore on either side. The distribution of the escape times is wide and has a long tail. We find that $τ_e$ scales with the chain length $N$ as $τ_e \sim N^{1+2ν}$, where $ν$ is the Flory exponent. For driven translocation, we concentrate on the influence of the friction coefficie…
I did off-lattice 3D Monte Carlo simulations for polymer translocation through a narrow pore at low external field, trying to be as close to a direct approach as possible. The process was found non equilibrium globally, but dynamics of the monomers close to the pore (the fold) was found close to quasi equilibrium. I observed a tension (or pressure) buildup near the pore, and subdiffusion for the displacement of the middle monomer in the pore, as reported in the literature. I did not find the distribution of the reaction coordinate after some time of free diffusion predicted by the fractional d…
We investigate the translocation dynamics of a folded linear polymer which is pulled through a nanopore by an external force. To this end, we generalize the iso-flux tension propagation (IFTP) theory for end-pulled polymer translocation to include the case of two segments of the folded polymer traversing simultaneously trough the pore. Our theory is extensively benchmarked with corresponding Molecular Dynamics (MD) simulations. The translocation process for a folded polymer can be divided into two main stages. In the first stage, both branches are traversing the pore and their dynamics is coup…
We have used Langevin dynamics to simulate the forced translocation of linked polymer rings through a narrow pore. For fixed size (i.e. fixed number of monomers) the translocation time depends on the link type and on whether the rings are knotted or unknotted. For links with two unknotted rings, the crossings between the rings can slow down the translocation and are responsible for a delay as the crossings pass through the pore. The results fall on a set of relatively smooth curves for different link families with the translocation time not always increasing with crossings number within the sa…
Using Langevin dynamics simulations, we investigate the influence of polymer-pore interactions on the dynamics of biopolymer translocation through nanopores. We find that an attractive interaction can significantly change the translocation dynamics. This can be understood by examining the three components of the total translocation time $τ\approx τ_1+τ_2+τ_3$ corresponding to the initial filling of the pore, transfer of polymer from the \textit{cis} side to the \textit{trans} side, and emptying of the pore, respectively. We find that the dynamics for the last process of emptying of the pore ch…
We investigate the impact of dielectric boundary forces on the translocation process of charged rigid DNA segments through solid neutral nanopores. We assess the electrostatic contribution to the translocation free energy barrier of a model DNA segment by evaluating the potential of mean force in absence and presence of polarization effects by means of coarse-grained molecular dynamics simulations. The effect of induced polarization charges has been taken into account by employing ICC*, a recently developed algorithm that can efficiently compute induced polarization charges induced on suitably…
We present a theoretical argument to derive a scaling law between the mean translocation time $τ$ and the chain length $N$ for driven polymer translocation. This scaling law explicitly takes into account the pore-polymer interactions, which appear as a correction term to asymptotic scaling and are responsible for the dominant finite size effects in the process. By eliminating the correction-to-scaling term we introduce a rescaled translocation time and show, by employing both the Brownian Dynamics Tension Propagation theory [Ikonen {\it et al.}, Phys. Rev. E {\bf 85}, 051803 (2012)] and molecu…
Deformation of single stranded DNA in translocation process before reaching the pore is investigated. By solving the Laplace equation in a suitable coordinate system and with appropriate boundary conditions, an approximate solution for the electric field inside and outside of a narrow pore is obtained. With an analysis based on "electrohydrodynamic equivalence" we determine the possibility of extension of a charged polymer due to the presence of an electric field gradient in the vicinity of the pore entrance. With a multi-scale hybrid simulation (LB-MD), it is shown that an effective deformati…
Using continuous time Monte-Carlo method we simulated the translocation of a polynucleotide chain driven through a nanopore by an electric field. We have used two models of driven diffusion due to the electric field. The chain may have strong interaction with the pore, and depends on which end of the chain first enters the pore. Depending on this interaction, in both cases, the distribution of times for the chain to pass through the pore in our model is found to have three peaks, as observed in the experiment of Kasianowicz, Brandin, Branton and Deamer (KBBD).
We investigate the dynamics of DNA translocation through a nanopore using 2D Langevin dynamics simulations, focusing on the dependence of the translocation dynamics on the details of DNA sequences. The DNA molecules studied in this work are built from two types of bases $A$ and $C$, which has been shown previously to have different interactions with the pore. We study DNA with repeating blocks $A_nC_n$ for various values of $n$, and find that the translocation time depends strongly on the {\em block length} $2n$ as well as on the {\em orientation} of which base entering the pore first. Thus, w…
We study pore blockade times for a translocating polymer of length $N$, driven by a field $E$ across the pore in three dimensions. The polymer performs Rouse dynamics, i.e., we consider polymer dynamics in the absence of hydrodynamical interactions. We find that the typical time the pore remains blocked during a translocation event scales as $\sim N^{(1+2ν)/(1+ν)}/E$, where $ν\simeq0.588$ is the Flory exponent for the polymer. In line with our previous work, we show that this scaling behaviour stems from the polymer dynamics at the immediate vicinity of the pore -- in particular, the memory ef…
We consider a polymer of length $N$ translocating through a narrow pore in the absence of external fields. Characterization of its purportedly anomalous dynamics has so far remained incomplete. We show that the polymer dynamics is anomalous until the Rouse time $τ_{R}\sim N^{1+2ν}$, with a mean square displacement through the pore consistent with $t^{(1+ν)/(1+2ν)}$, with $ν\approx0.588$ the Flory exponent. This is shown to be directly related to a decay in time of the excess monomer density near the pore as $t^{-(1+ν)/(1+2ν)}\exp(-t/τ_{R})$. Beyond the Rouse time translocation becomes diffusiv…
We investigate polymer translocation through a nanopore under a pulling force using Langevin dynamics simulations. We concentrate on the influence of the chain length $N$ and the pulling force $F$ on the translocation time $τ$. The distribution of $τ$ is symmetric and narrow for strong $F$. We find that $τ\sim N^{2}$ and translocation velocity $v\sim N^{-1}$ for both moderate and strong $F$. For infinitely wide pores, three regimes are observed for $τ$ as a function of $F$. With increasing $F$, $τ$ is independent of $F$ for weak $F$, and then $τ\sim F^{-2+ν^{-1}}$ for moderate $F$, where $ν$ i…
The effect of the microscopic structure of a pore on polymer translocation is studied using Langevin dynamics simulation, and the consequence of introducing patterned stickiness inside the pore is investigated. It is found that the translocation process is extremely sensitive to the detailed structure of such patterns with faster than exponential dependence of translocation times on the stickiness of the pore. The stochastic nature of the translocation process leads to discernable differences between how polymers with different sequences go through specifically patterned pores. This notion is …
We investigate the dynamics of DNA translocation through a nanopore driven by an external force using Langevin dynamics simulations in two dimensions (2D) to study how the translocation dynamics depend on the details of the DNA sequences. We consider a coarse-grained model of DNA built from two bases $A$ and $C$, having different base-pore interactions, {\textit e.g.}, a strong (weak) attractive force between the pore and the base $A$ ($C$) inside the pore. From a series of studies on hetero-DNAs with repeat units $A_mC_n$, we find that the translocation time decreases exponentially as a funct…
Monte Carlo simulations are used to study the translocation of a polymer into and out of a ellipsoidal cavity through a narrow pore. We measure the polymer free energy F as a function of a translocation coordinate, s, defined to be the number of bonds that have entered the cavity. To study polymer insertion, we consider the case of a driving force acting on monomers inside the pore, as well as monomer attraction to the cavity wall. We examine the changes to F(s) upon variation in the shape anisometry and volume of the cavity, the polymer length, and the strength of the interactions driving the…
The transport of polymers with folded configurations across membrane pores is investigated theoretically by analyzing simple discrete stochastic models. The translocation dynamics is viewed as a sequence of two events: motion of the folded segment through the channel followed by the linear part of the polymer. The transition rates vary for the folded and linear segments because of different interactions between the polymer molecule and the pore. It is shown that the translocation time depends non-monotonously on the length of the folded segment for short polymers and weak external fields, whil…
Here using LAMMPS molecular dynamics (MD) software, we simulate polymer translocation in 2 dimensions. We do the simulations for weak and moderate forces and for different pore diameters. Our results show that in both non-equilibrium and equilibrium initial conditions, translocation time will always increase by increasing binding energy and or increasing pore diameter. Moreover, scaling exponent of time versus force is -0.9531 in accordance to our predecessors. The comparison between equilibrium and non-equilibrium initial condition shows that the translocation time is very sensitive to the in…
This paper studies the features of a homopolymer translocating through a flexible pore. The channel is modeled as a monolayer tube composed by monomers with two elastic parameters: spring-like two body interaction and bending three body recall interaction. In order to guarantee the stability of the system, the membrane is compounded by a lipid bilayer structure having hydrophobic body (internal), while the pore is hydrophilic in both edges. The polymer is end-pulled from the cis-side to the trans-side by a cantilever, to which is connected through a spring able to measure the force acting on t…
Monte Carlo (MC) simulations are used to study the dynamics of polymer translocation through a nanopore in the limit where the translocation rate is sufficiently slow that the polymer maintains a state of conformational quasi-equilibrium. The system is modeled as a flexible hard-sphere chain that translocates through a cylindrical hole in a hard flat wall. In some calculations, the nanopore is connected at one end to a spherical cavity. Translocation times are measured directly using MC dynamics simulations. For sufficiently narrow pores, translocation is sufficiently slow that the mean transl…
The impact of thermal fluctuations on the translocation dynamics of a polymer chain driven through a narrow pore has been investigated theoretically and by means of extensive Molecular-Dynamics (MD) simulation. The theoretical consideration is based on the so-called velocity Langevin (V-Langevin) equation which determines the progress of the translocation in terms of the number of polymer segments, $s(t)$, that have passed through the pore at time $t$ due to a driving force $f$. The formalism is based only on the assumption that, due to thermal fluctuations, the translocation velocity $v=\dot{…
During polymer translocation driven by e.g. voltage drop across a nanopore, the segments in the cis-side is incessantly pulled into the pore, which are then pushed out of it into the trans-side. This pulling and pushing polymer segments are described in the continuum level by nonlinear transport processes known, respectively, as fast and slow diffusions. By matching solutions of both sides through the mass conservation across the pore, we provide a physical basis for the cis and trans dynamical asymmetry, a feature repeatedly reported in recent numerical simulations. We then predict how the to…
Translocation of a polymer out of curved surface or membrane is studied via mean first passage time approach. Membrane curvature gives rise to a constraint on polymer conformation, which effectively drives the polymer to the outside of membrane where the available volume of polymer conformational fluctuation is larger. Considering a polymer release out of spherical vesicle, polymer translocation time $τ$ is changed to the scaling behavior $τ\sim L^2$ for $R<R_G$, from $τ\sim L^3$ for $R\gg R_G$, where $L$ is the polymer contour length and $R$, $R_G$ are vesicle radius and polymer radius of gyr…
Motivated by experiments in which a polynucleotide is driven through a proteinaceous pore by an electric field, we study the diffusive motion of a polymer threaded through a narrow channel with which it may have strong interactions. We show that there is a range of polymer lengths in which the system is approximately translationally invariant, and we develop a coarse-grained description of this regime. From this description, general features of the distribution of times for the polymer to pass through the pore may be deduced. We also introduce a more microscopic model. This model provides a ph…
Resizable elastomeric nanopores have been used to measure pulses of ionic current caused by carboxylated polystyrene spheres of diameter 200 nm and 800 nm. The nanopores represent a novel technology which enables nanoscale resizing of a pore by macroscopic actuation of an elastomeric membrane. Three different pores were employed with variable applied strain, transmembrane potential, particle concentration and sphere radius. Theory describing current pulse magnitude has been extended to conical pore geometry. A consistent method for interpretation of data close to the noise threshold has been i…
The motion of polymers with inhomogeneous structure through nanopores is discussed theoretically. Specifically, we consider the translocation dynamics of polymers consisting of double-stranded and single-stranded blocks. Since only the single-stranded chain can go through the nanopore the double-stranded segment has to unzip before the translocation. Utilizing a simple analytical model, translocation times are calculated explicitly for different polymer orientations, i.e., when the single-stranded block enters the pore first and when the double-stranded segment is a leading one. The dependence…
We use a combination of computer simulations and iso-flux tension propagation (IFTP) theory to investigate translocation dynamics of a flexible linear polymer through a nanopore into an environment composed of repulsive active rods in 2D. We demonstrate that the rod activity induces a crowding effect on the polymer, leading to a time-dependent net force that facilitates translocation into the active environment. Incorporating this force into the IFTP theory for pore-driven translocation allows us to characterise translocation dynamics in detail and derive a scaling form for the average translo…
We study the translocation of a flexible polymer through a pore in a membrane induced by its adsorption on \trans side of the membrane. When temperature $T$ is higher than $T_c$, the adsorption-desorption transition temperature, attractive interaction between polymer and membrane plays little role in affecting polymer conformation, leading to translocation time that scales as $τ\sim L^3$ where $L$ is the polymer contour length. When $T < T_c$, however, the translocation time undergoes a sharp crossover to $τ\sim L^2$ for sufficiently long polymers, following the second order conformational (ad…
