This chapter provides an overview of the techniques of radio astronomy. This study began in 1931 with Jansky's discovery of emission from the cosmos, but the period of rapid progress began fifteen years later. From then to the present, the wavelength range expanded from a few meters to the sub-millimeters, the angular resolution increased from degrees to finer than milli arc seconds and the receiver sensitivities have improved by large factors. Today, the technique of aperture synthesis produces images comparable to or exceeding those obtained with the best optical facilities. In addition to technical advances, the scientific discoveries made in the radio range have contributed much to opening new visions of our universe. There are numerous national radio facilities spread over the world. In the near future, a new era of truly global radio observatories will begin. This chapter contains a short history of the development of the field, details of calibration procedures, coherent/heterodyne and incoherent/bolometer receiver systems, observing methods for single apertures and interferometers, and an overview of aperture synthesis.
This chapter introduces the concepts of polarimetry in the case of low frequency radio astronomy. In this regime radio waves are usually not the signature of atomic or molecular transitions lines, but rather that of unstable particle distribution functions releasing their free energy through electromagnetic radiation. As the radio source region is usually magnetized, the propagation medium (at least close to the source) is anisotropic, and the polarization depends on the local magnetic field direction, the propagation mode and the direction of propagation.
A major challenge in modern radio astronomy is dealing with the massive data volumes generated by wide-bandwidth receivers. Such massive data rates are often too great for a single device to cope, and so processing must be split across multiple devices working in parallel. These devices must work in unison to process incoming data in real time, reduce the data volume to a manageable size, and output a science-ready data product. The aim of this chapter is to give a broad overview of how digital systems for radio telescopes are commonly implemented, with a focus on real-time stream processing o…
Modelling steerable beams of satellite constellations for radio astronomy impact studies
SKA Observatory（平方公里阵列望远镜观测台）；IAU Centre for the Protection of the Dark and Quiet Sky from Satellite Constellation Interference（国际天文学联合会暗静天空保护中心）；Onsala Space Observatory, Chalmers University of Technology（翁萨拉空间天文台，查尔姆斯理工大学）
Radio Frequency Interference (RFI) has historically plagued radio astronomy, worsening with the rapid spread of electronics and increasing telescope sensitivity. We present a multi-dimensional probabilistic framework for characterising the RFI environment around a radio astronomy site that uses automatically flagged data from the array itself. We illustrate the framework using about 1500 hours of commissioning data from the MeerKAT radio telescope; producing a 6-dimensional array that yields both average RFI occupancy as well as confidence intervals around the mean as a function of key variabl…
RF system-on-chip (RFSoC) devices provide the potential for implementing a complete radio astronomy receiver on a single board, but performance of the integrated analogue-to-digital converters is critical. We have evaluated the performance of the data converters in the Xilinx ZU28DR RFSoC, which are 12-bit, 8-fold interleaved converters with a maximum sample speed of 4.096 Giga-sample per second (GSPS). We measured the spurious-free dynamic range (SFDR), signal-to-noise and distortion (SINAD), effective number of bits (ENOB), intermodulation distortion (IMD) and cross-talk between adjacent cha…
The GRANDProto300 (GP300) experiment is the first stage of the Giant Radio Array for Neutrino Detection (GRAND) project. It will be deployed between 2020 and 2021 in a radio-quiet area, at $3000\,$m of altitude at the rim of the Tibetan plateau, over a total surface of $200\,$km$^2$. The primary goal of GP300 is to demonstrate the viability of the GRAND detection concepts. It will provide a unique test bench to develop and validate new identification and reconstruction techniques for the radio detection of very inclined air-showers, in the perspective of the next stages of GRAND. GP300 also pr…
We present the first survey of radio frequency interference (RFI) at the future site of the low frequency Square Kilometre Array (SKA), the Murchison Radio-astronomy Observatory (MRO), that both temporally and spatially resolves the RFI. The survey is conducted in a 1 MHz frequency range within the FM band, designed to encompass the closest and strongest FM transmitters to the MRO (located in Geraldton, approximately 300 km distant). Conducted over approximately three days using the second iteration of the Engineering Development Array in an all-sky imaging mode, we find a range of RFI signals…
We developed a GPU based single-pulse search pipeline (GSP) with candidate-archiving database. Largely based upon the infrastructure of Open source pulsar search and analysis toolkit (PRESTO), GSP implements GPU acceleration of the de-dispersion and integrates a candidate-archiving database. We applied GSP to the data streams from the commensal radio astronomy FAST survey (CRAFTS), which resulted in a quasi-real-time processing. The integrated candidate database facilitates synergistic usage of multiple machine-learning tools and thus improves efficient identification of radio pulsars such as …
Closure phases and closure amplitudes have proven critical to modern radio interferometry due to their insensitivity to the uncertain station gains. We present the first set of closure quantities constructed from parallel-hand and cross-hand visibilities that are insensitive to both station gains and to polarimetric leakage. These complex "closure traces" are a natural extension of closure amplitudes and closure phases, are independent of all station-based linear corruptions of the polarized visibilities, and are complete in the sense that they contain all remaining information present in the …
Electrical coupling of a horizontal dipole antenna to a dielectric half-space: applications to radio astronomy from the lunar surface
Lawrence Berkeley National Laboratory（劳伦斯伯克利国家实验室）；University of California, Berkeley（加州大学伯克利分校）；The Blackett Laboratory, Imperial College London（帝国理工学院布莱克特实验室）；Brookhaven National Laboratory（布鲁克海文国家实验室）
This paper presents a survey of microwave front-end receivers installed at radio telescopes throughout the World. This unprecedented analysis was conducted as part of a review of front-end developments for Italian radio telescopes, initiated by the Italian National Institute for Astrophysics in 2016. Fifteen international radio telescopes have been selected to be representative of the instrumentation used for radio astronomical observations in the frequency domain from 300 MHz to 116 GHz. A comprehensive description of the existing receivers is presented and their characteristics are compared …
The Seoul Radio Astronomy Observatory (SRAO) operates a 6.1-meter radio telescope on the Gwanak campus of Seoul National University. We present the efforts to reform SRAO to a Very Long Baseline Interferometry (VLBI) station, motivated by recent achievements by millimeter interferometer networks such as Event Horizon Telescope, East Asia VLBI Network, and Korean VLBI Network (KVN). For this goal, we installed a receiver that had been used in the Combined Array for Research in Millimeter-wave Astronomy and a digital backend, including an H-maser clock. The existing hardware and software were al…
Recent progresses of electronics, essentially due to its miniaturization, are opening new fields that were just dreamed of, notably in astronomy. At start in paragraph 3, we introduce the time variation of images expressing the dual nature of the optical signal (ZO) and we expose several useful applications where the optical signal variations are not faster than CCD. However we prefered to initiate the article with a deeper question posed inadvertently in paragraph 2: what causes the rapid, well timed and regular variation of the signals induced in our test setup, which we see in Fig. 1. The a…
Several post-detection approaches to the mitigation of radio-frequency interference (RFI) are compared by applying them to the strong RFI from the Iridium satellites. These provide estimates for the desired signal in the presence of RFI, by exploiting distinguishing characteristics of the RFI, such as its polarization, statistics, and periodicity. Our data are dynamic spectra with full Stokes parameters and 1 ms time resolution. Moreover, since most man-made RFI is strongly polarized, we use the data to compare its unpolarized component with its Stokes I. This approach on its own reduces the R…
