By comparing the response to external strains in metallic glasses and in Lenard-Jones glasses we find a quantitative universality of the fundamental plastic instabilities in the athermal, quasistatic limit. Microscopically these two types of glasses are as different as one can imagine, the latter being determined by binary interactions, whereas the former by multiple interactions due to the effect of the electron gas that cannot be disregarded. In spite of this enormous difference the plastic instability is the same saddle-node bifurcation. As a result the statistics of stress and energy drops in the elasto-plastic steady state are universal, sharing the same system-size exponents.
Simulations are used to determine the effect of inertia on athermal shear of a two-dimensional binary Lennard-Jones glass. In the quasistatic limit, shear occurs through a series of rapid avalanches. The distribution of avalanches is analyzed using finite-size scaling with thousands to millions of particles. Inertia takes the system to a new underdamped universality class rather than driving the system away from criticality. Scaling exponents are determined for the underdamped and overdamped limits and a critical damping that separates the two regimes. Systems are in the overdamped universalit…
A mesoscopic model of amorphous plasticity is discussed in the context of depinning models. After embedding in a d + 1 dimensional space, where the accumulated plastic strain lives along the additional dimension, the gradual plastic deformation of amorphous media can be regarded as the motion of an elastic manifold in a disordered landscape. While the associated depinning transition leads to scaling properties, the quadrupolar Eshelby interactions at play in amorphous plasticity induce specific additional features like shear-banding and weak ergodicity breakdown. The latters are shown to be co…
We propose a method to predict the value of the external strain where a generic amorphous solid will fail by a plastic response (i.e. an irreversible deformation), solely on the basis of measurements of the nonlinear elastic moduli. While usually considered fundamentally different, with the elastic properties describing reversible phenomena and plastic failure epitomizing irreversible behavior, we show that the knowledge of some nonlinear elastic moduli is enough to predict where plasticity sets in.
Amorphous magnetic solids, like metallic glasses, exhibit a novel effect: the growth of magnetic order as a function of mechanical strain under athermal conditions in the presence of a magnetic field. The magnetic moment increases in steps whenever there is a plastic event. Thus plasticity induces the magnetic ordering, acting as the effective noise driving the system towards equilibrium. We present results of atomistic simulations of this effect in a model of a magnetic amorphous solid subjected to pure shear and a magnetic field. To elucidate the dependence on external strain and magnetic fi…
Plastic events in amorphous solids can be much more than just "shear transformation zones" when the positional degrees of freedom are coupled non-trivially to other degrees of freedom. Here we consider magnetic amorphous solids where mechanical and magnetic degrees of freedom interact, leading to rather complex plastic events whose nature must be disentangled. In this paper we uncover the anatomy of the various contributions to some typical plastic events. These plastic events are seen as Barkhausen Noise or other "serrated noises". Using theoretical considerations we explain the observed stat…
We build a mean-field model of plasticity of amorphous solids, based on the dynamics of an ensemble shear transformation zones, interacting via intrinsic dynamical noise generated by the zone flips themselves. We compare the quasi-static, steady-state properties for two types of noise spectrum: (G) Gaussian; (E) broad distribution derived from quadrupolar elastic interactions. We find that the plastic flow proceeds via avalanches whose scaling properties with system size are highly sensitive to noise tails. Comparison with available data suggests that non-affine strain fields might be of param…
We present a thorough study of the plastic response of a granular material progressively loaded. We study experimentally the evolution of the plastic field from a homogeneous one to an heterogeneous one and its fluctuations in term of incremental strain. We show that the plastic field can be decomposed in two components evolving on two decoupled strain increment scales. We argue that the slowly varying part of the field can be identified to the so-called fluidity field introduced recently to interpret the rheological behaviour of amorphous materials. This fluidity field progressively concentra…
We report on a particle-based numerical study of sheared amorphous solids in the dense slow flow regime. In this framework, deformation and flow are accompanied by critical fluctuation patterns associated with the macroscopic plastic response and single particle kinematics. The former is commonly attributed to the collective slip patterns that relax internal stresses within the bulk material and give rise to an effective mechanical noise governing the latter particle-level process. In this work, the avalanche-type dynamics between plastic events is shown to have a strong relevance on the self-…
Amorphous solids yield in strain-controlled protocols at a critical value of the strain. For larger strains the stress and energy display a generic complex serrated signal with elastic segments punctuated by sharp energy and stress plastic drops having a wide range of magnitudes. Here we provide a theory of the scaling properties of such serrated signals taking into account the system-size dependence. We show that the statistics are not homogeneous - they separate sharply to a regime of `small' and `large' drops, each endowed with its own scaling properties. A scaling theory is first derived s…
We use considerations of energy balance and dissipation to derive a self-consistent version of the shear-transformation-zone (STZ) theory of plastic deformation in amorphous solids. The theory is generalized to include arbitrary spatial orientations of STZs. Continuum equations for elasto-plastic material and their energy balance properties are discussed.
We demonstrate that irreversible structural reorganization is not necessary for the observation of yield behaviour in an amorphous solid. While the majority of solids strained to their yield point do indeed undergo an irreversible reorganization, we find a significant fraction of solids exhibit yield via a reversible strain. We also demonstrate that large instantaneous strains in excess of the yield stress can result in complete stress relaxation, a result of the large non-affine motions driven by the applied strain. The empirical similarity of the dependence of the ratio of stress over strain…
The response of amorphous materials to an applied strain can be continuous, or instead display a macroscopic stress drop when a shear band nucleates. Such discontinuous response can be observed if the initial configuration is very stable. We study theoretically how such brittleness emerges in athermal, quasi-statically driven, materials as their initial stability is increased. We show that this emergence is well reproduced by elasto-plastic models and is predicted by a mean field approximation, where it corresponds to a continuous transition. In mean field, failure can be forecasted from the a…
Surface stress and surface energy are fundamental quantities which characterize the interface between two materials. Although these quantities are identical for interfaces involving only fluids, the Shuttleworth effect demonstrates that this is not the case for most interfaces involving solids, since their surface energies change with strain. Crystalline materials are known to have strain dependent surface energies, but in amorphous materials, such as polymeric glasses and elastomers, the strain dependence is debated due to a dearth of direct measurements. Here, we utilize contact angle measur…
We address the cross effects between mechanical strains and magnetic fields on the plastic response of magnetoelastic amorphous solids. It is well known that plasticity in non-magnetic amorphous solids under external strain $γ$ is dominated by the co-dimension 1 saddle-node bifurcation in which an eigenvalue of the Hessian matrix vanishes at $γ_P$ like $\sqrt{γ_P-γ}$. This square-root singularity determines much of the statistical physics of elasto-plasticity, and in particular that of the stress-strain curves under athermal-quasistatic conditions. In this Letter we discuss the much richer phy…
When an amorphous solid is deformed homogeneously, the response exhibits heterogeneous plastic instabilities with localized cooperative rearrangement of cluster of particles. The heterogeneous behavior plays an important role in deciding the mechanical properties of amorphous solids. In this paper, we employ computer simulation to study the characteristics and the spatial correlations of these clusters characterized by the non-affine displacements in amorphous solids under simple shear deformation in the athermal quasistatic limit. The clusters with large displacements are found to be homogene…
When stressed sufficiently, solid materials yield and deform plastically via reorganization of microscopic constituents. Indeed, it is possible to alter the micro-structure of materials by judicious application of stress, an empirical pro- cess utilized in practice to enhance the mechanical properties of metals. Un- derstanding the interdependence of plastic flow and microscopic structure in these non-equilibrium states, however, remains a major challenge. Here, we ex- perimentally investigate this relationship, between the relaxation dynamics and microscopic structure of disordered colloidal …
``Shear softening" refers to the observed reduction in shear modulus when the stress on an amorphous solid is increased beyond the initial linear region. Careful numerical quasi-static simulations reveal an intimate relation between plastic failure and shear softening. The attaintment of the steady-state value of the shear modulus associated with plastic flow is identified with a percolation of the regions that underwent a plastic event. We present an elementary ``two-state" model that interpolates between failed and virgin regions and provides a simple and effective characterization of the sh…
We perform large scale simulations of a two dimensional lattice model for amorphous plasticity with random local yield stresses and long-range quadrupolar elastic interactions. We show that as the external stress increases towards the yielding phase transition, the scaling behavior of the avalanches crosses over from mean-field theory to a different universality class. This behavior is associated with strain localization, which significantly depends on the short-range properties of the interaction kernel.
The onset of irreversible deformation in low-temperature amorphous solids is due to the accumulation of elementary events, consisting of spacially and temporally localized atomic rearrangements involving only a few tens of atoms. Recently, numerical and experimental work addressed the issue of spatio-temporal correlations between these plastic events. Here, we provide further insight into these correlations by investigating, via molecular dynamics (MD) simulations, the plastic response of a two-dimensional amorphous solid to artificially triggered local shear transformations. We show that whil…
We study plastic strain during individual avalanches in overdamped particle-scale molecular dynamics (MD) and meso-scale elasto-plastic models (EPM) for amorphous solids sheared in the athermal quasi-static limit. We show that the spatial correlations in plastic activity exhibit a short lengthscale that grows as $t^{3/4}$ in MD and ballistically in EPM, and is generated by mechanical excitation of nearby sites not necessarily close to their stability thresholds, and a longer lengthscale that grows diffusively for both models and is associated with remote marginally stable sites. These similari…
We use the shear transformation zone (STZ) theory of dynamic plasticity to study the necking instability in a two-dimensional strip of amorphous solid. Our Eulerian description of large-scale deformation allows us to follow the instability far into the nonlinear regime. We find a strong rate dependence; the higher the applied strain rate, the further the strip extends before the onset of instability. The material hardens outside the necking region, but the description of plastic flow within the neck is distinctly different from that of conventional time-independent theories of plasticity.
We report a combined experimental and simulation study of deformation-induced diffusion in compacted two-dimensional amorphous granular pillars, in which thermal fluctuations play negligible role. The pillars, consisting of bidisperse cylindrical acetal plastic particles standing upright on a substrate, are deformed uniaxially and quasistatically by a rigid bar moving at a constant speed. The plastic flow and particle rearrangements in the pillars are characterized by computing the best-fit affine transformation strain and non-affine displacement associated with each particle between two stage…
A mesoscopic model for shear plasticity of amorphous materials in two dimensions is introduced, and studied through numerical simulations in order to elucidate the macroscopic (large scale) mechanical behavior. Plastic deformation is assumed to occur through a series of local reorganizations. Using a discretization of the mechanical fields on a discrete lattice, local reorganizations are modeled as local slip events. Local yield stresses are randomly distributed in space and invariant in time. Each plastic slip event induces a long-ranged elastic stress redistribution. Rate and thermal effects…
The slow flow of amorphous solids exhibits striking heterogeneities: swift localised particle rearrangements take place in the midst of a more or less homogeneously deforming medium. Recently, experimental as well as numerical work has revealed spatial correlations between these flow heterogeneities. Here, we use molecular dynamics (MD) simulations to characterise the rearrangements and systematically probe their correlations both in time and in space. In particular, these correlations display a four-fold azimuthal symmetry characteristic of shear stress redistribution in an elastic medium and…
We use energetic considerations to deduce the form of a previously uncertain coupling term in the shear-transformation-zone (STZ) theory of plastic deformation in amorphous solids. As in the earlier versions of the STZ theory, the onset of steady deformation at a yield stress appears here as an exchange of dynamic stability between jammed and plastically deforming states. We show how an especially simple ``quasilinear'' version of this theory accounts qualitatively for many features of plasticity such as yielding, strain softening, and strain recovery. We also show that this minimal version of…
We discuss the plastic behavior of an amorphous matrix reinforced by hard particles. A mesoscopic depinning-like model accounting for Eshelby elastic interactions is implemented. Only the effect of a plastic disorder is considered. Numerical results show a complex size-dependence of the effective flow stress of the amorphous composite. In particular the departure from the mixing law shows opposite trends associated to the competing effects of the matrix and the reinforcing particles respectively. The reinforcing mechanisms and their effects on localization are discussed. Plastic strain is show…
We discuss avalanche and finite size fluctuations in a mesoscopic model to describe the shear plasticity of amorphous materials. Plastic deformation is assumed to occur through series of local reorganizations. Yield stress criteria are random while each plastic slip event induces a quadrupolar long range elastic stress redistribution. The model is discretized on a regular square lattice. Shear plasticity can be studied in this context as a depinning dynamic phase transition. We show evidence for a scale free distribution of avalanches $P(s)\propto S^{-κ}$ with a non trivial exponent $κ\approx …
Starting from known kinematic picture for plasticity, we derive a set of dynamical equations describing plastic flow in a Lagrangian formulation. Our derivation is a natural and a straightforward extension of simple fluids, elastic and viscous solids theories. These equations contain the Maxwell model as a special limit. We discuss some results of plasticity which can be described by this set of equations. We exploit the model equations for the simple examples: straining of a slab and a rod. We find that necking manifests always itself (not as a result of instability), except if the very speci…
Amorphous solids lack long-range order. Therefore identifying structural defects -- akin to dislocations in crystalline solids -- that carry plastic flow in these systems remains a daunting challenge. By comparing many different structural indicators in computational models of glasses, under a variety of conditions we carefully assess which of these indicators are able to robustly identify the structural defects responsible for plastic flow in amorphous solids. We further demonstrate that the density of defects changes as a function of material preparation and strain in a manner that is highly…
Plastic instabilities in amorphous materials are often studied using idealized models of binary mixtures that do not capture accurately molecular interactions and bonding present in real glasses. Here we study atomic scale plastic instabilities in a three dimensional molecular dynamics model of silica glass under quasi-static shear. We identify two distinct types of elementary plastic events, one is a standard quasi-localized atomic rearrangement while the second is a bond breaking event that is absent in simplified models of fragile glass formers. Our results show that both plastic events can…
We investigate a minimal model of the plastic deformation of amorphous materials. The material elements are assumed to exhibit ideally plastic behavior (J2 plasticity). Structural disorder is considered in terms of random variations of the local yield stresses. Using a finite element implementation of this simple model, we simulate the plane-strain deformation of long thin rods loaded in tension. The resulting strain patterns are statistically characterized in terms of their spatial correlation functions. Studies of the corresponding surface morphology reveal a non-trivial Hurst exponent of ap…
We present the results of numerical simulations of an atomistic system undergoing plastic shear flow in the athermal, quasistatic limit. The system is shown to undergo cascades of local rearrangements, associated with quadrupolar energy fluctuations, which induce system-spanning events organized into lines of slip oriented along the Bravais axes of the simulation cell. A finite size scaling analysis reveals subextensive scaling of the energy drops and participation numbers, linear in the length of the simulation cell, in good agreement with the observed real-space structure of the plastic even…
We focus on the probability distribution function (pdf) $P(Δγ; γ)$ where $Δγ$ are the {\em measured} strain intervals between plastic events in an athermal strained amorphous solids, and $γ$ measures the accumulated strain. The tail of this distribution as $Δγ\to 0$ (in the thermodynamic limit) scales like $Δγ^η$. The exponent $η$ is related via scaling relations to the tail of the pdf of the eigenvalues of the {\em plastic modes} of the Hessian matrix $P(λ)$ which scales like $λ^θ$, $η=(θ-1)/2$. The numerical values of $η$ or $θ$ can be determined easily in the unstrained material and in the …
Amorphous solids that underwent a strain in one direction such that they responded in a plastic manner `remember' that direction also when relaxed back to a state with zero mean stress. We address the question `what is the order parameter that is responsible for this memory?' and is therefore the reason for the different subsequent responses of the material to strains in different directions. We identify such an order parameter which is readily measurable, we discuss its trajectory along the stress-strain curve, and propose that it and its probability distribution function must form a necessar…
We demonstrate that surface morphogenesis in compressed thin films may result from spatially correlated plastic activity. A soft glassy film strongly adhering to a smooth and rigid substrate and subjected to uniaxial compression, indeed, does not undergo any global elastic pattern-forming instability, but responds plastically via localized burst events that self-organize, leading to the emergence of a series of parallel ridges transverse to the compression axis. This phenomenon has been completely overlooked, but results from common features of the plastic response of glasses, hence should be …
Plastic deformation in solids induced by external shear stress is of huge practical interest. Presence of local crystalline order in polycrystals, consisting of many grains, distinguishes its deformation pattern from that of amorphous materials. Despite strong anisotropy, induced by external stress, the plastic flow and the consequent deformation field show strong dynamical heterogeneity. The distribution $P(u)$ of particle displacements ($u$) shows three distinct regimes including a power law scaling regime at moderate displacements. Using a phase field simulation we show how polycrystals gen…
Plasticity in soft amorphous materials typically involves collective deformation patterns that emerge upon intense shearing. The microscopic basis of amorphous plasticity has been commonly established through the notion of "Eshelby"-type events, localized abrupt rearrangements that induce flow in the surrounding material via non-local elastic-type interactions. This universal mechanism in flowing disordered solids has been proposed despite their diversity in terms of scales, microscopic constituents, or interactions. However, we argue that the presence of frictional interactions in granular so…
While perfect crystals may exhibit a purely elastic response to shear all the way to yielding, the response of amorphous solids is punctuated by plastic events. The prevalence of this plasticity depends on the number of particles $N$ of the system, with the average strain interval before the first plastic event, $\overline{Δγ}$, scaling like $N^α$ with $α$ negative: larger samples are more susceptible to plasticity due to more numerous disorder-induced soft spots. In this paper we examine this scaling relation in ultra-stable glasses prepared with the Swap Monte Carlo algorithm, with regard to…
Amorphous solids yield at a critical value $Σ_c$ of the imposed stress $Σ$ through a dynamical phase transition. While sharp in athermal systems, the presence of thermal fluctuations leads to the rounding of the transition and thermally activated flow even below $Σ_c$. Here, we study the steady state thermal flow of amorphous solids using a mesoscopic elasto-plastic model. In the Hebraud-Lequex (HL) model we provide an analytical solution of the thermally activated flow at low temperature. We then propose a general scaling law that also describes the transition rounding. Finally, we find that …
We present results on a series of 2D atomistic computer simulations of amorphous systems subjected to simple shear in the athermal, quasistatic limit. The athermal quasistatic trajectories are shown to separate into smooth, reversible elastic branches which are intermittently broken by discrete catastrophic plastic events. The onset of a typical plastic event is studied with precision, and it is shown that the mode of the system which is responsible for the loss of stability has structure in real space which is consistent with a quadrupolar source acting on an elastic matrix. The plastic event…
Structural heterogeneity of amorphous solids present difficult challenges that stymie the prediction of plastic events, which are intimately connected to their mechanical behavior. Based on a perturbation analysis of the potential energy landscape, we derive the atomic nonaffinity as an indicator with intrinsic orientation, which quantifies the contribution of an individual atom to the total nonaffine modulus of the system. We find that the atomic nonaffinity can efficiently characterize the locations of the shear transformation zones, with a predicative capacity comparable to the best indicat…
We discuss aging and localization in a simple "Eshelby" mesoscopic model of amorphous plasticity. Plastic deformation is assumed to occur through a series of local reorganizations. Using a discretization of the mechanical fields on a discrete lattice, local reorganizations are modeled as local slip events. Local yield stresses are randomly distributed in space and invariant in time. Each plastic slip event induces a long-ranged elastic stress redistribution. Mimicking the effect of aging, we focus on the behavior of the model when the initial state is characterized by a distribution of high lo…
The distribution of local residual stresses (threshold to instability) that controls the statistical properties of plastic flow in athermal amorphous solids is examined with an atomistic simulation technique. For quiescent configurations, the distribution has a pseudogap (power-law) form with an exponent that agrees well with global yielding statistics. As soon as deformation sets in, the pseudogap region gives way to a system size dependent plateau at small residual stresses that can be understood from the statistics of local residual stress {\em differences} between plastic events. Results f…
Amorphous materials of homogeneous structures usually suffer from nonuniform deformation under shear, which can develop into shear localization and eventually destructive shear band. One approach to tackle this issue is to introduce an inhomogeneous structure containing more than one phase, which can reduce the local nonuniform shear deformation and hinder its percolation throughout the system. Using thermostated molecular dynamics (MD) simulations, we compare the deformation behavior between a homogeneous amorphous mixture of bidisperse disc particles, interacting via an n-6 Lennard-Jones pot…
A wide range of materials can exist in microscopically disordered solid forms, referred to as amorphous solids or glasses. Such materials -- oxide glasses and metallic glasses, to polymer glasses, and soft solids such as colloidal glasses, emulsions and granular packings -- are useful as structural materials in a variety of contexts. Their deformation and flow behaviour is relevant for many others. Apart from fundamental questions associated with the formation of these solids, comprehending their mechanical behaviour is thus of interest, and of significance for their use as materials. In parti…
The effect of oscillatory shear strain on nonaffine rearrangements of individual particles in a three-dimensional binary glass is investigated using molecular dynamics simulations. The amorphous material is represented by the Kob-Andersen mixture at the temperature well below the glass transition. We find that during periodic shear deformation of the material, some particles undergo reversible nonaffine displacements with amplitudes that are approximately power-law distributed. Our simulations show that particles with large amplitudes of nonaffine displacement exhibit a collective behavior; na…
Using numerical simulations, we study the failure of an amorphous solid under quasi-static expansion starting from a homogeneous high-density state. During the volume expansion, we demonstrate the existence of instabilities manifesting via saddle-node bifurcation in which a minimum meets a saddle. During all such events, the smallest eigenvalue of the Hessian matrix vanishes as a square-root singularity. The plastic instabilities are manifested via sudden jumps in pressure and energy, with the largest event happening when a cavity appears, leading to the yielding of the material. We show that …
Molecular dynamics simulations are performed to investigate the plastic response of a model glass to a local shear transformation in a quiescent system. The deformation of the material is induced by a spherical inclusion that is gradually strained into an ellipsoid of the same volume and then reverted back into the sphere. We show that the number of cage-breaking events increases with increasing strain amplitude of the shear transformation. The results of numerical simulations indicate that the density of cage jumps is larger in the cases of weak damping or slow shear transformation. Remarkabl…
