Timing pulses of pulsars has proved to be a most powerful technique useful to a host of research areas in astronomy and physics. Importantly, the precision of this timing is not only affected by radiometer noise, but also by intrinsic pulse shape changes, interstellar medium (ISM) evolution, instrumental distortions, etc. In this paper we review the known causes of pulse shape variations and assess their effect on the precision and accuracy of a single measurement of pulse arrival time with current instrumentation. Throughout this analysis we use the brightest and most precisely timed millisecond pulsar (MSP), PSR J0437-4715, as a case study, and develop a set of diagnostic tools to evaluate profile stability in timing observations. We conclude that most causes of distortion can be either corrected by state-of-the-art techniques or taken into account in the estimation of time-of-arrival (TOA) uncertainties. The advent of a new generation of radio telescopes (e.g. the Square Kilometre Array, SKA), and their increase in collecting area has sparked speculation about the timing precision achievable through increases in gain. Based on our analysis of current data, we predict that for normal-brightness MSPs a TOA precision of between 80 and 230 ns can be achieved at 1.4 GHz with 10-minute integrations by the SKA. The actual rms timing residuals for each pulsar will be approximately at the same level only if all the other influences on timing precision (e.g. ISM, spin noise) are either corrected, modelled, or negligible.
Pulsars are remarkably precise "celestial clocks" that can be used to explore many different aspects of physics and astrophysics. In this article I give a brief summary of pulsar properties and describe some of the applications of pulsar timing, including tests of theories of gravitation, efforts to detect low-frequency gravitational waves using pulsar timing arrays and establishment a "pulsar timescale".
Highly precise pulsar timing is very important for understanding the nature of a neutron star, and it can even be used to detect gravitational waves. Unfortunately, the accuracy of the pulsar timing is seriously affected by the spin-down irregularities of pulsars.
We investigate the impact of intrinsic, kinematic and gravitational effects on high precision pulsar timing. We present an analytical derivation and a numerical computation of the impact of these effects on the first and second derivative of the pulsar spin frequency. In addition, in the presence of white noise, we derive an expression to determine the expected measurement uncertainty of a second derivative of the spin frequency for a given timing precision, observing cadence and timing baseline and find that it strongly depends on the latter ($\propto t^{-7/2}$). We show that for pulsars with…
Young pulsars deviate from a perfectly regular spin-down by two non-deterministic phenomena: impulsive glitches and timing noise. Both phenomena are interesting per se, and may provide insights into the superfluid properties of neutron stars, but they also act as a barrier to high-precision pulsar timing and gravitational wave experiments. We study a minimal stochastic model to describe the spin-down of a multicomponent neutron star, with fluctuations in both the internal and external torques. The power spectral density and timing noise strength of this kind of model can be obtained analytical…
Gravitational scattering events, in which the path of an interstellar object is deflected by a pulsar or the solar system, give rise to reflex motion which can potentially be detected using pulsar timing. We determine the form of the timing signal expected from a gravitational scattering event, which is ramp-like and resembles the signal produced by a glitch or a gravitational wave burst with memory (BWM), and investigate the prospects for detecting such a signal using a pulsar timing array. The level of timing precision currently achieved for some millisecond pulsars makes it possible to dete…
We have used the Nanshan 25-m Radio Telescope at Xinjiang Astronomical Observatory to obtain timing observations of 87 pulsars from 2002 July to 2014 March. Using the "Cholesky" timing analysis method we have determined positions and proper motions for 48 pulsars, 24 of which are improved positions compared to previously published values. We also present the first published proper motions for nine pulsars and improved proper motions for 21 pulsars using pulsar timing and position comparison method. The pulsar rotation parameters are derived and are more accurate than previously published value…
Radio timing observations of a millisecond pulsar in orbit around the Galactic centre black hole (BH) or a BH at the centre of globular clusters could answer foundational questions in astrophysics and fundamental physics. Pulsar radio astronomy typically employs the post-Keplerian approximation to determine the system parameters. However, in the strong gravitational field around the central BH, higher order relativistic effects may become important. We compare the pulsar timing delays given by the post-Keplerian approximation with those given by a relativistic timing model. We find significant…
Pulsar's position, proper motion and parallax are important parameters in timing equations. It is a really challenging work to fit astrometric parameters accurately through pulsar timing, especially for pulsars that show irregular timing properties. As the fast development of related techniques, it is possible to measure astrometric parameters of more and more pulsars in a model$\textrm{-}$independent manner with the Very Long Baseline Interferometry (VLBI). In this work, we select 16 normal pulsars, whose parallax and proper motion have not been successfully fitted with timing observations or…
We investigate the impact of noise processes on high-precision pulsar timing. Our analysis focuses on the measurability of the second spin frequency derivative $\ddotν$. This $\ddotν$ can be induced by several factors including the radial velocity of a pulsar. We use Bayesian methods to model the pulsar times-of-arrival in the presence of red timing noise and dispersion measure variations, modelling the noise processes as power laws. Using simulated times-of-arrival that both include red noise, dispersion measure variations and non-zero $\ddotν$ values, we find that we are able to recover the …
We study the timing stability of three black widow pulsars, both in terms of their long-term spin evolution and their shorter-term orbital stability. The erratic timing behaviour and radio eclipses of the first two black widow pulsar systems discovered (PSRs B1957+20 and J2051$-$0827) was assumed to be representative for this class of pulsars. With several new black widow systems added to this population in the last decade, there are now several systems known that do not show these typical orbital variations or radio eclipses. We present timing solutions using 7$-$8 yrs of observations from fo…
Max Planck Institute for Gravitational Physics (Albert Einstein Institute)（马克斯·普朗克引力物理研究所（爱因斯坦研究所））；Leibniz Universität Hannover（汉诺威莱布尼茨大学）；Max-Planck-Institut für Radioastronomie（马克斯·普朗克射电天文研究所）
The form of timing residuals due to errors in pulsar spin period $P$ and its derivative $\dot{P}$, in positions, as well as in proper motions, have been well presented for decades in the literature. However, the residual patterns due to errors in the pulsar acceleration have not been reported previously, while a pulsar in the galaxy or a globular cluster (GC) will be unavoidably accelerated. The coupling effect of the pulsar transverse acceleration and the R$\rm{\ddot{o}}$mer delay on timing residuals are simulated in this work. The results show that the residual due to the effect can be ident…
The double pulsar (PSR J0737-3039A/B) provides some of the most stringent tests of general relativity (GR) and its alternatives. The success of this system in tests of GR is largely due to the high-precision, long-term timing of its recycled-pulsar member, pulsar A. On the other hand, pulsar B is a young pulsar that exhibits significant short-term and long-term timing variations due to the electromagnetic-wind interaction with its companion and geodetic precession. Improving pulsar B's timing precision is a key step towards improving the precision in a number of GR tests with PSR J0737-3039A/B…
The LOFAR Tied-Array All-Sky Survey (LOTAAS) is the most sensitive untargeted radio pulsar survey performed at low radio frequencies (119--151\,MHz) to date and has discovered 76 new radio pulsars, among which the 23.5-s pulsar J0250+5854, up until recently the slowest-spinning radio pulsar known. Here, we report on the timing solutions of 35 pulsars discovered by LOTAAS, which include a nulling pulsar and a mildly recycled pulsar, and thereby complete the full timing analysis of the LOTAAS pulsar discoveries. We give an overview of the findings from the full LOTAAS sample of 76 pulsars, discu…
In this paper we present a coherent timing analysis of the 401 Hz pulsations of the accreting millisecond X-ray pulsar SAX J1808.4-3658 during its 2019 outburst. Using observations collected with the Neutron Star Interior Composition Explorer (NICER), we establish the pulsar spin frequency and orbital phase during its latest epoch. We find that the 2019 outburst shows a pronounced evolution in pulse phase over the course of the outburst. These phase shifts are found to correlate with the source flux, and are interpreted in terms of hot-spot drift on the stellar surface, driven by changes in th…
The SUrvey for Pulsars and Extragalactic Radio Bursts ran from 2014 April to 2019 August, covering a large fraction of the southern hemisphere at mid- to high-galactic latitudes, and consisting of 9-minute pointings taken with the 20-cm multibeam receiver on the Parkes Radio Telescope. Data up to 2017 September 21 have been searched using standard Fourier techniques, single-pulse searches, and Fast Folding Algorithm searches. We present 19 new discoveries, bringing the total to 27 discoveries in the programme, and we report the results of follow-up timing observations at Parkes for 26 of these…
We present a principal component analysis method which tracks and compensates for short-timescale variability in pulsar profiles, with a goal of improving pulsar timing precision. We couple this with a fast likelihood technique for determining pulse time of arrival, marginalizing over the principal component amplitudes. This allows accurate estimation of timing errors in the presence of pulsar variability. We apply the algorithm to the slow pulsar PSR J2139+0040 using an archived set of untargeted raster-scan observations at arbitrary epochs across four years, obtaining an improved timing solu…
A pulsar timing array (PTA) refers to a program of regular, high-precision timing observations of a widely distributed array of millisecond pulsars. Here we review the status of the three primary PTA projects and the joint International Pulsar Timing Array project. We discuss current results related to ultra-low-frequency gravitational wave searches and highlight opportunities for the near future.
We aim to resolve a misunderstanding about whether the so-called "Earth term" in the pulsar timing response to a gravitational wave is in phase among a set of pulsars. We note that the misunderstanding has potentially arisen from the statements that the Earth term is "coherent" or "builds up coherently" among the pulsars. We clarify what authors mean by "coherent" in these statements, pointing out that "coherent" does not indicate that the Earth terms are in phase among the pulsars. Using the pulsar timing residuals induced by a continuous gravitational wave, we show that the Earth term does n…
The smooth spin-down of young pulsars is perturbed by two non-deterministic phenomenon, glitches and timing noise. Although the timing noise provides insights into nuclear and plasma physics at extreme densities, it acts as a barrier to high-precision pulsar timing experiments. An improved methodology based on Bayesian inference is developed to simultaneously model the stochastic and deterministic parameters for a sample of 85 high-$\dot{E}$ radio pulsars observed for $\sim$ 10 years with the 64-m Parkes radio telescope. Timing noise is known to be a red process and we develop a parametrizatio…
While pulsars possess exceptional rotational stability, large scale timing studies have revealed at least two distinct types of irregularities in their rotation: red timing noise and glitches. Using modern Bayesian techniques, we investigated the timing noise properties of 300 bright southern-sky radio pulsars that have been observed over 1.0-4.8 years by the upgraded Molonglo Observatory Synthesis Telescope (MOST). We reanalysed the spin and spin-down changes associated with nine previously reported pulsar glitches, report the discovery of three new glitches and four unusual glitch-like event…
Radio pulsars are often used as clocks in a wide variety of experiments. Imperfections in the clock, known as timing noise, have the potential to reduce the significance of, or even thwart e.g. the attempt to find a stochastic gravitational wave (GW) background. We measure the timing noise in a group of 129 mostly middle-aged pulsars (i.e. characterstic ages near 1~Myr) observed with the Parkes radio telescope on a monthly basis since 2014. We examine four different metrics for timing noise, but it remains unclear which, if any, provides the best determination. In spite of this, it is evident …
The main goal of pulsar timing array experiments is to detect correlated signals such as nanohertz-frequency gravitational waves. Pulsar timing data collected in dense monitoring campaigns can also be used to study the stars themselves, their binary companions, and the intervening ionised interstellar medium. Timing observations are extraordinarily sensitive to changes in path length between the pulsar and the Earth, enabling precise measurements of the pulsar positions, distances and velocities, and the shapes of their orbits. Here we present a timing analysis of 25 pulsars observed as part o…
Efforts are underway to use high-precision timing of pulsars in order to detect low-frequency gravitational waves. A limit to this technique is the timing noise generated by dispersion in the plasma along the line of sight to the pulsar, including the solar wind. The effects due to the solar wind vary with time, influenced by the change in solar activity on different time scales, ranging up to $\sim 11$ years for a solar cycle. The solar wind contribution depends strongly on the angle between the pulsar line of sight and the solar disk, and is a dominant effect at small separations. Although s…
There are two types of timing irregularities seen in pulsars: glitches and timing noise. Both of these phenomena can help us probe the interior of such exotic objects. This article presents a brief overview of the observational and theoretical aspects of pulsar timing irregularities and the main results from the investigations of these phenomena in India. The relevance of such Indian programs for monitoring of young pulsars with the Square Kilometer Array (SKA) is presented, highlighting possible contributions of the Indian neutron star community to the upcoming SKA endeavour.
Pulsar timing is a technique that uses the highly stable spin periods of neutron stars to investigate a wide range of topics in physics and astrophysics. Pulsar timing arrays (PTAs) use sets of extremely well-timed pulsars as a Galaxy-scale detector with arms extending between Earth and each pulsar in the array. These challenging experiments look for correlated deviations in the pulsars' timing that are caused by low-frequency gravitational waves (GWs) traversing our Galaxy. PTAs are particularly sensitive to GWs at nanohertz frequencies, which makes them complementary to other space- and grou…
Modeling of frequency-dependent effects, contributed by the turbulence in the free electron density of interstellar plasma, is required to enable the detection of the expected imprints from the stochastic gravitational-wave (GW) background in pulsar timing data. In this work, we present an investigation of temporal variations of interstellar medium for a set of millisecond pulsars (MSPs) with the upgraded GMRT aided by large fractional bandwidth at lower observing frequencies. Contrary to the conventional narrow-band analysis using a frequency invariant template profile, we applied $PulsePortr…
Pulsar Timing Array (PTA) experiments exploit the clock-like behaviour of an array of millisecond pulsars, with the goal of detecting low-frequency gravitational waves. PTA experiments have been in operation over the last decade, led by groups in Europe, Australia, and North America. These experiments use the most sensitive radio telescopes in the world, extremely precise pulsar timing models and sophisticated detection algorithms to increase the sensitivity of PTAs. No detection of gravitational waves has been made to date with this technique, but PTA upper limits already contributed to rule …
Pulsar timing experiments are currently searching for gravitational waves, and this dissertation focuses on the development and study of the pulsar timing residual models used for continuous wave searches. The first goal of this work is to re-present much of the fundamental physics and mathematics concepts behind the calculations and theory used in pulsar timing. While there exist many reference sources in the literature, I try to offer a fully self-contained explanation of the fundamentals of this research which I hope the reader will find helpful. The next goal broadly speaking has been to f…
A Realistic Pulsar -- Supermassive Black Hole Timing Model
Peking University（北京大学）；Kavli Institute for Astronomy and Astrophysics, Peking University（北京大学科维理天文与天体物理研究所）；National Astronomical Observatories, Chinese Academy of Sciences（中国科学院国家天文台）
Any unambiguous detection of a stochastic gravitational wave background by a pulsar timing array will rest on the measurement of a characteristic angular correlation between pulsars. The ability to measure this correlation will depend on the geometry of the array. However, spatially correlated sources of noise, such as errors in the planetary ephemeris or clock errors, can produce false-positive correlations. The severity of this contamination will also depend on the geometry of the array. This paper quantifies these geometric effects with a spherical harmonic analysis of the pulsar timing res…
Pulsar timing provides a sensitive probe of small-scale structure. Gravitational perturbations arising from an inhomogeneous environment could manifest as detectable perturbations in the pulsation phase. Consequently, pulsar timing arrays have been proposed as a probe of dark matter substructure on mass scales as small as $10^{-11} M_\odot$. Since the small-scale mass distribution is connected to early-Universe physics, pulsar timing can therefore constrain the thermal history prior to Big Bang nucleosynthesis (BBN), a period that remains largely unprobed. We explore here the prospects for pul…
Ultra-light Dark Matter (ULDM) models are suitable candidates for the cosmological Dark Matter that may leave characteristic imprints in many observables. Among other probes, signatures of ULDM can be searched for in pulsar timing data. In this work we describe the effects of spin-2 ULDM on pulsar timing arrays, extending previous results on lower spins. Spin-2 ULDM is universally coupled to standard matter with dimensionless strength $α$. We estimate that current data could constrain this coupling in the mass range $m\lesssim4\times10^{-22}$ eV at the $10^{-5}$ to $10^{-6}$ level, which is th…
