A simple metamaterial-based wide-angle plasmonic absorber is introduced, fabricated, and experimentally characterized using angle-resolved infrared spectroscopy. The metamaterials are prepared by nano-imprint lithography, an attractive low-cost technology for making large-area samples. The matching of the metamaterial's impedance to that of vacuum is responsible for the observed spectrally selective "perfect" absorption of infrared light. The impedance is theoretically calculated in the single-resonance approximation, and the responsible resonance is identified as a short-range surface plasmon. The spectral position of the absorption peak (which is as high as 95%) is experimentally shown to be controlled by the metamaterial's dimensions. The persistence of "perfect" absorption with variable metamaterial parameters is theoretically explained. The wide-angle nature of the absorber can be utilized for sub-diffraction-scale infrared pixels exhibiting spectrally selective absorption/emissivity.
Electromagnetic absorbers have drawn increasing attention in many areas. A series of plasmonic and metamaterial structures can work as efficient narrow band absorbers due to the excitation of plasmonic or photonic resonances, providing a great potential for applications in designing selective thermal emitters, bio-sensing, etc. In other applications such as solar energy harvesting and photonic detection, the bandwidth of light absorbers is required to be quite broad. Under such a background, a variety of mechanisms of broadband/multiband absorption have been proposed, such as mixing multiple r…
We demonstrate an efficient double-layer light absorber by exciting plasmonic phase resonances. We show that the addition of grooves can cause mode splitting of the plasmonic waveguide cavity modes and all the new resonant modes exhibit large absorptivity greater than 90%. Some of the generated absorption peaks have wide-angle characteristics. Furthermore, we find that the proposed structure is fairly insensitive to the alignment error between different layers. The proposed plasmonic nano-structure designs may have exciting potential applications in thin film solar cells, thermal emitters, nov…
Exploiting the dynamics of Plasmonic Parametric Resonance (PPR), we introduce the theory of Plasmonic Parametric Absorbers (PPA). The key insight informing the PPA idea is that in the PPR process a pump field experiences an extinction rate that strongly depends on the intensity of the pump itself, creating two distinct regimes: one of weak absorption under low intensity illumination, and one of strong absorption when the threshold of parametric resonance is met or exceeded. Due to this reverse saturable absorption behavior, PPAs are promising candidates for optical limiting applications.
In this paper, a plasmonic absorber consisting of a metal-dielectric-metal stack with a top layer of Sierpinski nanocarpet is theoretically investigated. Such compact absorber depicts broadband angle-independent behavior over a wide optical wavelength range ($400-700$ nm) and a broad range of angles of light incidence ($0-80^{\circ}$). Including several feature sizes, such fractal-like structure shows widely strong extinction ($85-99$%) response for either transverse electric or magnetic polarization states under normal incidence. Underlying mechanisms of absorbance due to excited surface plas…
A metamaterials-based approach to making a wide-angle absorber of infrared radiation is described. The technique is based on an anisotropic Perfectly Impedance Matched Negative Index Material (PIMNIM). It is shown analytically that a sub-wavelength in all three dimensions PIMNIM enables absorption of close to 100% for incidence angles up to $45°$ to the normal. A specific implementation of such frequency-tunable PIMNIM based on plasmonic metamaterials is presented. Applications to infrared imaging and coherent thermal sources are described.
The loss of surface plasmon polaritons has long been considered as a fatal shortcoming in information transport. Here we propose a plasmonic absorber utilizing this "shortcoming" to absorb the stray light in photonic integrated circuits (PICs). Based on adiabatic mode evolution, its performance is insensitive to incident wavelength with bandwidth larger than 300nm, and robust against surrounding environment and temperature. Besides, the use of metal enables it to be very compact and beneficial to thermal dissipation. With this 40um-long absorber, the absorption efficiency can be over 99.8% at …
By a hybrid integration of plasmonic and dielectric waveguide concepts, it is shown that coherent perfect absorption can be achieved in a co-propagant coupler geometry. The device holds promises for classical and quantum signal processing. First, the operating principle of the proposed device is detailed in the context of a more general 2x2 lossy coupler formalism. Then, it is shown how to tune the device in a wide region of possible working points, its broadband operation, and the tolerance to fabrication uncertainties. Finally, a complete picture of the electromagnetic modes inside the hybri…
Understanding the near-field electromagnetic interactions that produce optical orbital angular momentum (OAM) is central to the integration of twisted light into nanotechnology. Here, we examine the cathodoluminescence (CL) of plasmonic vortices carrying OAM generated in spiral nanostructures through scanning transmission electron microscopy (STEM). The nanospiral geometry defines the photonic local density of states (LDOS) sampled by STEM-CL, which provides access to the phase and amplitude of the plasmonic vortex with nanometer spatial and meV spectral resolution. We map the full spectral di…
Surface plasmon resonance (SPR) has been widely utilized to improve the absorption performance in the photosensors. Graphene has emerged as a promising plasmonic material, which supports tunable SPR and shows significant flexibility over metals. In this letter, a hybrid photosensor based on the integration of periodic cross-shaped graphene arrays with an ultrathin light-absorbing semiconductor is proposed. A tenfold absorption enhancement over a large range of the incidence angle for both light polarizations as well as a considerably high photogeneration rate ($\sim10^{37}$) is demonstrated at…
The development of responsive metamaterials has enabled the realization of compact tunable photonic devices capable of manipulating the amplitude, polarization, wave vector, and frequency of light. Integration of semiconductors into the active regions of metallic resonators is a proven approach for creating nonlinear metamaterials through optoelectronic control of the semiconductor carrier density. Metal-free subwavelength resonant semiconductor structures offer an alternative approach to create dynamic metamaterials. We present InAs plasmonic disk arrays as a viable resonant metamaterial at t…
We discuss the possibility of realizing utlrabroadband omnidirectional absorbers and angularly selective coherent thermal emitters based on properly patterned plasmonic metastructures. Instead of relying on resonant concentration effects that inherently limit the bandwidth, we base our design on the combination of two inherently nonresonant effects: plasmonic Brewster funneling and adiabatic plasmonic focusing. With this approach, we demonstrate compact, broadband absorption and emission spanning terahertz, infrared and optical frequencies, ideal for various energy and defense applications.
The plasmon-mediated manipulation of light-matter interaction in two-dimensional atomically transition-metal dichalcogenides (TMDs) critically depends on the design of plasmonic nanostructures to achieve the maximum optical field in TMDs. Here, a metal-isolator-metal Salisbury-type perfect absorber was fabricated to serve as a generator of the localized surface plasmons. The significant photoluminescence (PL) enhancement up to 60-fold was observed experimentally in the monolayer (ML) MoS2 on the top of this gold plasmonic hybrid nanostructures. Furthermore, the PL linear polarization can appro…
In this Letter we theoretically study the possibility of total power absorption of light in a planar grid modelled as an effective sheet with zero optical thickness. The key prerequisite of this effect is the simultaneous presence of both resonant electric and magnetic modes in the structure. We show that the needed level of the magnetic mode is achievable using the effect of substrate-induced bianisotropy which also allows the huge local field enhancement at the same wavelength where the maximal absorption holds.
The key feature of a thermophotovoltaic (TPV) emitter is the enhancement of thermal emission corresponding to energies just above the bandgap of the absorbing photovoltaic cell and simultaneous suppression of thermal emission below the bandgap. We show here that a single layer plasmonic coating can perform this task with high efficiency. Our key design principle involves tuning the epsilon-near-zero frequency (plasma frequency) of the metal acting as a thermal emitter to the electronic bandgap of the semiconducting cell. This approach utilizes the change in reflectivity of a metal near its pla…
The performance of plasmonic nanoantenna structures on top of SOI wire waveguides as coherent perfect absorbers for modulators and all-optical switches is explored. The absorption, scattering, reflection and transmission spectra of gold and aluminum nanoantenna-loaded waveguides were calculated by means of 3D finite-difference time-domain simulations for single waves propagating along the waveguide, as well as for standing wave scenarios composed from two counterpropagating waves. The investigated configurations showed losses of roughly 1% and extinction ratios greater than 25 dB for modulator…
Engineered optical absorbers are of substantial interest for applications ranging from stray light reduction to energy conversion. We demonstrate a large-area (centimeter-scale) metamaterial that features near-unity frequency-selective absorption in the mid-infrared wavelength range. The metamaterial comprises a self-assembled porous structure known as an inverse opal, here made of silica. The structure's large volume fraction of voids, together with the vibrational resonances of silica in the mid-infrared spectral range, reduce the metamaterial's refractive index to close to that of air and i…
Plasmonics offer an exciting way to mediate the interaction between light and matter, allowing strong field enhancement and confinement, large absorption and scattering at resonance. However, simultaneous realization of ultra-narrow band perfect absorption and electromagnetic field enhancement is challenging due to the intrinsic high optical losses and radiative damping in metals. Here, we propose an all-metal plasmonic absorber with an absorption bandwidth less than 8nm and polarization insensitive absorptivity exceeding 99%. Unlike traditional Metal-Dielectric-Metal configurations, we demons…
Power dissipation in electromagnetic absorbers is a quadratic function of the incident fields. To characterize an absorber, one needs to deal with the coupling that may occur between different excitations. Energy Absorption Interferometry (EAI) is a technique that highlights the independent degrees of freedom through which a structure can absorb energy: the natural absorption modes of the structure. The coupling between these modes vanishes. In this paper, we use the EAI formalism to analyse different kinds of plasmonic periodic absorbers while rigorously accounting for the coupling: resonant …
Plasmonic materials and metamaterials have been widely utilized to achieve spectral transmission, reflection and absorption filters based on localized or delocalized resonances arising from the interaction of photons with nanostructured materials. Realization of visible-frequency, high-performance, large-area, optical filters based on nanoplasmonic materials is rather challenging due to nanofabrication related problems (cost, fabrication imperfection, surface roughness) and optical losses of metals. Here, we propose and demonstrate large-area perfect absorbers and transmission filters that ove…
Hot charge carrier extraction from metallic nanostructures is a very promising approach for applications in photo-catalysis, photovoltaics and photodetection. One limitation is that many metallic nanostructures support a single plasmon resonance thus restricting the light-to-charge-carrier activity to a spectral band. Here we demonstrate that a monolayer of plasmonic nanoparticles can be assembled on a multi-stack layered configuration to achieve broad-band, near-unit light absorption, which is spatially localised on the nanoparticle layer. We show that this enhanced light absorbance leads to …
We experimentally demonstrate a wide band near perfect light absorber in the mid-wave infrared region using multiplexed plasmonic metal structures. The wide band near perfect light absorber is made of two different size gold metal squares multiplexed on a thin dielectric spacing layer on the top of a thick metal layer in each unit cell. We also fabricate regular non-multiplexed structure perfect light absorbers. The multiplexed structure IR absorber absorbs above 98% incident light over a much wider spectral band than the regular non-multiplexed structure perfect light absorbers in the mid-wav…
We present a computational study of terahertz optical properties of a grating-coupled plasmonic structure based on micrometer-thin InSb layers. We find two strong absorption resonances that we interpret as standing surface plasmon modes and investigate their dispersion relations, dependence on InSb thickness, and the spatial distribution of the electric field. The observed surface plasmon modes are well described by a simple theory of the air/InSb/air trilayer. The plasmonic response of the grating/InSb structure is highly sensitive to the dielectric environment and the presence of an analyte …
We present a simple one-pot co-assembly method for the synthesis of hierarchically structured pigment particles consisting of silica inverse-opal bricks that are doped with plasmonic absorbers. We study the interplay between the plasmonic and photonic resonances and their effect on the visual appearance of macroscopic collections of photonic bricks that are distributed in randomized orientations. Manipulating the pore geometry tunes the wavelength- and angle-dependence of the scattering profile, which can be engineered to produce angle-dependent Bragg resonances that can either enhance or cont…
Here, we demonstrate a spectrally broadband, GHz-fast Mach-Zehnder interferometeric modulator, exhibiting a miniscule VpL of 95 V-um, deploying a sub-wavelength short electrostatically tunable plasmonic phase-shifter, based on heterogeneously integrated ITO thin films into silicon photonics.
Plasmonics can be used to improve absorption in optoelectronic devices and has been intensively studied for solar cells and photodetectors. Graphene has recently emerged as a powerful plasmonic material. It shows significantly less losses compared to traditional plasmonic materials such as gold and silver and its plasmons can be tuned by changing the Fermi energy with chemical or electrical doping. Here we propose the usage of graphene plasmonics for light trapping in optoelectronic devices and show that the excitation of localized plasmons in doped, nanostructured graphene can enhance optical…
Complete absorption of electromagnetic waves is paramount in today's applications, ranging from photovoltaics to cross-talk prevention into sensitive devices. In this context, we use a genetic algorithm (GA) strategy to optimize absorption properties of periodic arrays of truncated square-based pyramids made of alternating stacks of metal/dielectric layers. We target ultra-broadband quasi-perfect absorption of normally incident electromagnetic radiations in the visible and near-infrared ranges (wavelength comprised between 420 and 1600 nm). We compare the results one can obtain by considering …
Design and Analysis of Plasmonic-Nanorod-Enhanced Lead-Free Inorganic Perovskite/Silicon Heterojunction Tandem Solar Cell Exceeding the Shockley-Queisser Limit
We experimentally and numerically study the potential of photoacoustic-guiding for light focusing through scattering samples via wavefront-shaping and iterative optimization. We experimentally demonstrate that the focusing efficiency on an extended absorber can be improved by iterative optimization of the high frequency components of the broadband photoacoustic signal detected with a spherically focused transducer. We demonstrate more than 8-fold increase in the photoacoustic signal generated by a 30 microns wire using a narrow frequency band around 60MHz. We numerically confirm that such opti…
Using metamaterial absorbers, we have shown that metallic layers in the absorbers do not necessarily constitute undesired resistive heating problem for photovoltaics. Tailoring the geometric skin depth of metals and employing the natural bulk absorbance characteristics of the semiconductors in those absorbers can enable the exchange of undesired resistive losses with the useful optical absorbance in the active semiconductors. Thus, Ohmic loss dominated metamaterial absorbers can be converted into photovoltaic near-perfect absorbers with the advantage of harvesting the full potential of light m…
We present the model of an ultrasensitive mid-infrared (mid-IR) photodetector operating in the mid-wavelength infrared (MWIR) and long-wavelength infrared (LWIR) domains consisting of a hybrid heterostructure made of nanopatterned graphene (NPG) and vanadium dioxide (VO$_2$) which exhibits a large responsivity of $R\sim 10^4$ V/W, a detectivity exceeding $D^*\sim 10^{10}$ J, and a sensitivity in terms of noise-equivalent power $\mathrm{NEP}\sim 100$ fW/$\sqrt{\rm Hz}$ close to room temperature by taking advantage of the phase change of a thin VO$_2$ film. Our proposed photodetector can reach a…
We demonstrate a broadband, polarization independent, omnidirectional absorber based on a metallic metasurface architecture, which accomplishes greater than 90% absorptance in the visible and near-infrared range of the solar spectrum, and exhibits low emissivity at mid- and far-infrared wavelengths. The complex unit cell of the metasurface solar absorber consists of eight pairs of gold nano-resonators that are separated from a gold ground plane by a thin silicon dioxide spacer. Our experimental measurements reveal high-performance absorption over a wide range of incidence angles for both s- an…
A simple design paradigm for making broad-band ultra-thin plasmonic absorbers is introduced. The absorber's unit cell is composed of sub-units of various sizes, resulting in nearly 100% absorbance at multiple adjacent frequencies and high absorbance over a broad frequency range. A simple theoretical model for designing broad-band absorbers is presented. It uses a single-resonance model to describe the optical response of each sub-unit and employs the series circuit model to predict the overall response. Validity of the circuit model relies on short propagation lengths of the surface plasmons.
An ultrabroad absorber based on double-ring-shaped titanium nitride (TiN) nanoresonators, which can work in high temperatures, is proposed and numerically studied. The absorber with some optimal parameters exhibits an averaged absorption of 94.6% in the range of 200 - 4000 nm (from ultraviolet to mid-infrared) and a band from 200 - 3518 nm having an absorption > 90%. We have demonstrated in detail the physical mechanisms of the ultra-broad absorption, including the dielectric lossy property of TiN material itself in shorter wavelengths and plasmonic resonances caused by the metallic property o…
Dissipation of electromagnetic energy through absorption is a fundamental process that underpins phenomena ranging from photovoltaics to photography, analytical spectroscopy, photosynthesis, and human vision. Absorption is also a dynamic process that depends on the duration of the optical illumination. Here we report on the resonant plasmonic absorption of a nanostructured metamaterial and the non-resonant absorption of an unstructured gold film at different optical pulse durations. By examining the absorption in travelling and standing waves, we observe a plasmonic relaxation time of 11 fs as…
A tri-layer metamaterial perfect absorber of light, consisting of (Al/ZnS/Al) films with the top aluminium layer patterned as an array of circular disk nanoantennas, is investigated for resonantly enhancing Raman scattering from C-60 fullerene molecules deposited on the metamaterial. The metamaterial is designed to have resonant bands due to plasmonic and electromagnetic resonances at the Raman pump frequency (725 nm) as well as Stokes emission bands. The Raman scattering from C60 on the metamaterial with resonantly matched bands is measured to be enhanced by an order of magnitude more than fr…
We propose a scheme to realize nonlinear coherent perfect absorption (CPA) at the nanoscale using epsilon-near-zero (ENZ) plasmonic waveguides. The general conditions to achieve CPA in a linear ENZ plasmonic waveguide are analyzed and presented. The proposed ENZ waveguides support an effective ENZ response at their cut-off frequency, where the CPA effect occurs under the illumination of two counter-propagating plane waves with equal amplitudes and appropriate phase distributions. In addition, the strong and uniform field enhancement inside the nanochannels of the waveguides at the ENZ resonanc…
Designing broadband metamaterial perfect absorbers is challenging due to the intrinsically narrow bandwidth of surface plasmon resonances. Here, the paper reports an ultra-broadband metamaterial absorber by using space filling Gosper curve. The optimized result shows an average absorptivity of 95.78% from 2.64 to 9.79 μm across the entire mid-infrared region. Meanwhile, the absorber shows insensitivity to the polarization angle and the incident angle of the incident light. The underlying physical principles, used in our broadband absorber, involve a fractal geometry with multiple scales and a …
In this paper, we proposed a theoretical model in the far-infrared and terahertz (THz) bands, which is a dumbbell-shaped graphene metamaterial arrays with a combination of graphene nanorod and two semisphere-suspended heads. We report a detailed theoretical investigation on how to enhance localized electric field and the absorption in the dumbbell-shaped graphene metamaterial arrays. The simulation results show that by changing the geometrical parameters of the structure and the Fermi level of graphene, we can change the absorption characteristics. Furthermore, we have discovered that the reso…
We present an infrared photodetector leveraging an all-epitaxial device architecture consisting of a 'designer' plasmonic metal integrated with a quantum-engineered detector structure, all in a mature III-V semiconductor material system. Incident light is coupled into surface plasmon-polariton modes at the detector/'designer' metal interface, and the strong confinement of these modes allows for a sub-diffractive ($\sim λ_0 / 33$) detector absorber layer thickness, effectively decoupling the detector's absorption efficiency and dark current. We demonstrate high-performance detectors operating a…
Designing broadband enhanced chirality is of strong interest to the emerging fields of chiral chemistry and sensing, or to control the spin orbital momentum of photons in recently introduced nanophotonic chiral quantum and classical optical applications. However, chiral light-matter interactions have an extremely weak nature, are difficult to be controlled and enhanced, and cannot be made tunable or broadband. In addition, planar ultrathin nanophotonic structures to achieve strong, broadband, and tunable chirality at the technologically important visible to ultraviolet spectrum still remain el…
Localized plasmons formed in ultrathin metallic nanogaps can lead to robust absorption of incident light. Plasmonic metasurfaces based on this effect can efficiently generate energetic charge carriers, also known as hot electrons, owing to their ability to squeeze and enhance electromagnetic fields in confined subwavelength spaces. However, it is very challenging to accurately identify and quantify the dynamics of hot carriers, mainly due to their ultrafast time decay. Their non-equilibrium temperature response is one of the key factors missing to understand the short time decay and overall tr…
We theoretically investigate photothermal heating of ultra-flexible metamaterials, which are obtained by randomly mixing TiN nanoparticles in polydimethylsiloxane (PDMS). Due to the plasmonic properties of TiN nanoparticles, incident light is perfectly absorbed in a broadband range (300-3000 nm) to generate heat within these metamaterials. Under irradiation of an 808 nm near-infrared laser with different intensities, our predicted temperature rises as a function of time agree well with recent experimental data. For a given laser intensity, the temperature rise varies non-monotonically with con…
We study light absorption by a dipolar absorber in a given environment, which can be a nanoantenna or any complex inhomogeneous medium. From first-principle calculations, we derive an upper bound for the absorption, which decouples the impact of the environment from the one of the absorber. Since it is an intrinsic characteristic of the environment regardless of the absorber, it provides a good figure of merit to compare the ability of different systems to enhance absorption. We show that, in the scalar approximation, the relevant parameter is not the field enhancement but the ratio between th…
Graphene plasmonic nanostructures enable subwavelength confinement of electromagnetic energy from the mid-infrared down to the terahertz frequencies. By exploiting the spectrally varying light scattering phase at vicinity of the resonant frequency of the plasmonic nanostructure, it is possible to control the angle of reflection of an incoming light beam. We demonstrate, through full-wave electromagnetic simulations based on Maxwell equations, the electrical control of the angle of reflection of a mid-infrared light beam by using an aperiodic array of graphene nanoribbons, whose widths are engi…
Concentrating solar power, particularly parabolic trough system with solar concentrations less than 50, requires spectrally selective solar absorbers that are thermally stable at high temperatures of 400degC above to achieve high efficiency. In this work, the solar-thermal performance of a selective multilayer metafilm absorber is characterized along with a black absorber for comparison by a lab-scale experimental setup that measures the steady-state absorber temperature under multiple solar concentrations. Heat transfer analysis is employed to elucidate different heat transfer modes and valid…
We present an experimental and theoretical study of modal nonlinear dynamics in a specially designed dual-mode semiconductor Fabry-Perot laser with a saturable absorber. At zero bias applied to the absorber section, we have found that with increasing device current, single mode self-pulsations evolve into a complex dynamical state where the total intensity experiences regular bursts of pulsations on a constant background. Spectrally resolved measurements reveal that in this state the individual modes of the device can follow highly symmetric but oppositely directed spiralling orbits. Using a g…
We study a highly controllable perfect plasmonic absorber -- a thin metamaterial layer which possess balanced electric and magnetic responses in some frequency range. We show that this regime is compatible with both metal-backed variant of the structure or its semitransparent variant. This regime can be implemented in a prospective thin-film photovoltaic cell with negligible parasitic losses.
The absorption process of an emitter close to a plasmonic antenna is enhanced due to strong local electromagnetic (EM) fields. The emission process, if resonant with the plasmonic system, re-radiates to the far-field by coupling with the antenna due to the availability of plasmonic states. This increases the local density of states (LDOS), effectively providing more, or alternate, pathways for emission. Through the mapping of localized emission events from single molecules close to plasmonic antennas, performed using far-field data, one gains combined information on both the local EM field str…
III-V semiconductor type-II superlattices (T2SLs) are a promising material system with the potential to significantly reduce the dark current of, and thus realize high-performance in, infrared photodetectors at elevated temperatures. However, T2SLs have struggled to meet the performance metrics set by the longstanding infrared detector material of choice, HgCdTe. Recently, epitaxial plasmonic detector architectures have demonstrated T2SL detector performance comparable to HgCdTe in the 77 K - 195 K temperature range. Here we demonstrate a high operating temperature plasmonic T2SL detector arch…
