A Wireless Body Area Network (WBAN) is a collection of low-power and lightweight wireless sensor nodes that are used to monitor the human body functions and the surrounding environment. It supports a number of innovative and interesting applications, including ubiquitous healthcare and Consumer Electronics (CE) applications. Since WBAN nodes are used to collect sensitive (life-critical) information and may operate in hostile environments, they require strict security mechanisms to prevent malicious interaction with the system. In this paper, we first highlight major security requirements and Denial of Service (DoS) attacks in WBAN at Physical, Medium Access Control (MAC), Network, and Transport layers. Then we discuss the IEEE 802.15.4 security framework and identify the security vulnerabilities and major attacks in the context of WBAN. Different types of attacks on the Contention Access Period (CAP) and Contention Free Period (CFP) parts of the superframe are analyzed and discussed. It is observed that a smart attacker can successfully corrupt an increasing number of GTS slots in the CFP period and can considerably affect the Quality of Service (QoS) in WBAN (since most of the data is carried in CFP period). As we increase the number of smart attackers the corrupted GTS slots are eventually increased, which prevents the legitimate nodes to utilize the bandwidth efficiently. This means that the direct adaptation of IEEE 802.15.4 security framework for WBAN is not totally secure for certain WBAN applications. New solutions are required to integrate high level security in WBAN.
The success in the growing wireless standards can be measured by the achievement of quality of service (QoS) specifications by the designers. The IEEE802.11 wireless standards are widely accepted as wireless technology for wireless LAN. Efforts have been made over the years by the task group to provide adequate number of QoS enhancement schemes for the increasing numbers of multimedia applications. This paper examines the empirical performances of ad hoc wireless networks deployed on IEEE802.11 standard variants. A survey to some of the QoS schemes incorporated in IEEE802.11 wireless PHY layer…
IEEE 802.11ay defines new PHY and MAC specifications that enable 100 Gbps communications in the 60 GHz millimeter-wave (mmWave) band. Among the various use cases supported by IEEE 802.11ay, fixed wireless access, a cost-efficient high-performance alternative and/or complement to conventional fixed access, differentiates itself due to its unique requirements and characteristics. In this article, our goal is to identify and describe key elements incorporated into IEEE 802.11ay, including scheduling, beamforming, and link maintenance, that efficiently support fixed wireless access. IEEE 802.11ay …
Apart from mobile cellular networks, IEEE 802.11-based wireless local area networks (WLANs) represent the most widely deployed wireless networking technology. With the migration of critical applications onto data networks, and the emergence of multimedia applications such as digital audio/video and multimedia games, the success of IEEE 802.11 depends critically on its ability to provide quality of service (QoS). A lot of research has focused on equipping IEEE 802.11 WLANs with features to support QoS. In this survey, we provide an overview of these techniques. We discuss the QoS features incor…
In this paper we suggest a novel idea to improve the Throughput of a rapidly chang- ing WiFi channel by exploiting the standard aggregation schemes in IEEE 802.11ac networks, and by transmitting several copies of the same MPDU(s) in a single trans- mission attempt. We test this idea in scenarios where Link Adaptation is not used and show a significant improvement, in the order of tens of percents, in the achieved Throughput. Keywords
Network technologies are traditionally based on wireline solutions. But the introduction of the IEEE 802.11 standards have made a huge impact on the market such that laptops, PCs, printers, cellphones, and VoIP phones, MP3 players in our homes, in offices and even in public areas have incorporated the wireless LAN technology. Wireless broadband technologies nowadays provide unlimited broadband access to users which were previously offered only to wireline users. In this paper, we review and summarize one of the emerging wireless broadband technology i.e. IEEE 802.11,which is a set of physical …
As a result of the recent advances in physical (PHY) layer communication techniques, it is possible to receive multiple packets at the receiver concurrently. This capability of a receiver to decode multiple simultaneous transmissions is known as multi-packet reception (MPR). In this paper, we propose a simple Medium Access Control (MAC) protocol for an MPR wireless channel, where we modify the backoff procedure as a function of number of ongoing transmissions in the channel. Our protocol is backward compatible with the IEEE 802.11 DCF protocol. The performance analysis of the proposed protocol…
IEEE 802.11 is a widely used wireless LAN standard for medium access control. TCP is a prominent transport protocol originally designed for wired networks. TCP treats packet loss as congestion and reduces the data rate. In wireless networks packets are lost not only due to congestion but also due to various other reasons. Hence there is need for making TCP adaptable to wireless networks. Various parameters of TCP and IEEE 802.11 can be set to appropriate values to achieve optimum performance results. In this paper optimum values for various parameters of IEEE 802.11 are determined. Network sim…
The IEEE 802.15.4 is a wireless standard introduced for low power, low cost wireless communication with moderate data rates. In the next few years, it is expected that Low Rate Wireless Personal Area Networks (LR-WPAN) will be used in a wide variety of embedded applications, including home automation, industrial sensing and control, environmental monitoring and sensing. In these applications, numerous embedded devices running on batteries are distributed in an area communicating via wireless radios. This work presents a method which can be used for comparing current consumption of wireless dat…
new generation of Wireless Local Area Networks (WLANs) will make its appearance in the market in the forthcoming years based on the amendments to the IEEE 802.11 standards that have recently been approved or are under development. Examples of the most expected ones are IEEE 802.11aa (Robust Audio Video Transport Streaming), IEEE 802.11ac (Very-high throughput at < 6 GHz), IEEE 802.11af (TV White Spaces) and IEEE 802.11ah (Machine-to-Machine communications) specifications. The aim of this survey is to provide a comprehensive overview of these novel technical features and the related open techni…
Network coding is an effective idea to boost the capacity of wireless networks, and a variety of studies have explored its advantages in different scenarios. However, there is not much analytical study on throughput and end-to-end delay of network coding in multi-hop wireless networks considering the specifications of IEEE 802.11 Distributed Coordination Function. In this paper, we utilize queuing theory to propose an analytical framework for bidirectional unicast flows in multi-hop wireless mesh networks. We study the throughput and end-to-end delay of inter-flow network coding under the IEEE…
The recently released IEEE 802.15.6 standard specifies several physical (PHY) layers and medium access control (MAC) layer protocols for variety of medical and non-medical applications of Wireless Body Area Networks (WBAN). The medical applications of WBAN has several obligatory requirements and constrains viz. high reliability, strict delay deadlines and low power consumption. The standard IEEE 802.15.6 MAC scheme is not able to fulfil the all requirements of medical applications of WBAN. To address this issue we propose an IEEE 802.15.6-based MAC scheme that is the modification of superframe…
This paper proposes a fair and efficient QoS scheduling scheme for IEEE 802.16 BWA systems that satisfies both throughput and delay guarantee to various real and non-real time applications. The proposed QoS scheduling scheme is compared with an existing QoS scheduling scheme proposed in literature in recent past. Simulation results show that the proposed scheduling scheme can provide a tight QoS guarantee in terms of delay, delay violation rate and throughput for all types of traffic as defined in the WiMAX standard, thereby maintaining the fairness and helps to eliminate starvation of lower p…
Industrial control systems present numerous challenges from the communication systems perspective: clock synchronization, deterministic behavior, low latency, high reliability, flexibility, and scalability. These challenges are mostly solved with standard technologies over Ethernet, e.g., Time-Sensitive Networking (TSN). As a research trend, it is expected that TSN will converge with wireless, leading to the Wireless TSN paradigm. Also, Wireless TSN is expected to be integrated with Ethernet TSN to create large-scale wired-wireless (Hybrid) TSN networks. The first step towards Hybrid TSN is th…
Wireless communication is a key element in the realization of the Industrial Internet of Things for flexible and cost-efficient monitoring and control of industrial processes. Wireless mesh networks using IEEE 802.15.4 have a high potential for executing monitoring and control tasks with low energy consumption and low costs for deployment and maintenance. However, conventional medium access techniques based on carrier sensing cannot provide the required reliability for industrial applications. Therefore, the standard was extended with techniques for time-slotted medium access on multiple chann…
Collecting sensor data in industrial environments from up to some tenth of battery powered sensor nodes with sampling rates up to 100Hz requires energy aware protocols, which avoid collisions and long listening phases. The IEEE 802.15.4 standard focuses on energy aware wireless sensor networks (WSNs) and the Task Group 4e has published an amendment to fulfill up to 100 sensor value transmissions per second per sensor node (Low Latency Deterministic Network (LLDN) mode) to satisfy demands of factory automation. To improve the reliability of the data collection in the star topology of the LLDN m…
In this paper we develop an integrated model for request mechanism and data transmission in multi-channel wireless local area networks. We calculated the performance parameters for single and multi-channel wireless networks when the channel is noisy. The proposed model is general it can be applied to different wireless networks such as IEEE802.11x, IEEE802.16, CDMA operated networks and Hiperlan\2.
Realizing the industrial Internet of Things, more andmore mobile use cases will emerge in the industrial landscape,requiring both novel concepts and smooth integration into legacydeployments.Since accurate time synchronization is particularly challengingfor wireless devices, we propose a concept for simple but accuratesynchronization in IEEE 802.11 wireless local area network thatextends the Reference Broadcast Infrastructure Synchronizationprotocol, and a suitable integration of IEEE 802.1AS that is partof the IEEE time-sensitive networking standards. In addition,the concept is evaluated with…
IEEE 802.11 and IEEE 802.15.3 are wireless standards originally designed for wireless local area network (WLAN) and wireless personal area network (WPAN). This paper studies MAC throughput analysis of both standards. We present a comparative analysis of both standards in terms of MAC throughput and bandwidth efficiency. Numerical results show that the performance of IEEE 802.15.3 transcends IEEE 802.11 in all cases.
With the ratification of the IEEE 802.15.3d amendment to the 802.15.3, a first step has been made to standardize consumer wireless communications in the sub-THz frequency band. The IEEE 802.15.3d offers switched point-to-point connectivity with the data rates of 100\,Gbit/s and higher at distances ranging from tens of centimeters up to a few hundred meters. In this article, we provide a detailed introduction to the IEEE 802.15.3d and the key design principles beyond the developed standard. We particularly describe the target applications and usage scenarios, as well as the specifics of the IEE…
With the increasing popularity of wireless networks, wireless local area networks (WLANs) have attracted significant research interest, which play a critical role in providing anywhere and anytime connectivity. For WLANs the IEEE 802.11 standard is the most mature technology and has been widely adopted for wireless networks. This paper analyzes real-time performance of the IEEE 802.11 standard that adopts the MAC protocol of Distributed Coordination Function (DCF) operating in infrastructure mode. Extensive simulations have been done to examine how the network performance in terms of realtime …
Communication for control-centric industrial applications is characterized by the requirements of very high reliability, very low and deterministic latency and high scalability. Typically, IEEE 802.11-based wireless local area networks (WLANs), also known as Wi-Fi networks, are deemed ineligible for industrial control applications owing to insufficient reliability and non-deterministic latency. This paper proposes a novel solution for providing reliable and deterministic communication, through Wi-Fi, in industrial environments. The proposed solution, termed as \textsf{HAR\(^\text{2}\)D-Fi} (\u…
Distributed contention based Medium Access Control (MAC) protocols are the fundamental components for IEEE 802.11 based Wireless Local Area Networks (WLANs). Contention windows (CW) change dynamically to adapt to the current contention level, Upon each packet collision, a station doubles its CW to reduce further collision of packets. IEEE 802.11 Distributed Coordination Function (DCF) suffers from a common problem in erroneous channel. They cannot distinguish noise lost packets from collision lost packets. In both situations a station does not receive its ACK and doubles the CW to reduce furth…
We introduce and analyze a new Markov model of the IEEE 802.11 Distributed Coordination Function (DCF) for wireless networks. The new model is derived from a detailed DCF description where transition probabilities are determined by precise estimates of collision probabilities based on network topology and node states. For steady state calculations, we approximate joint probabilities from marginal probabilities using product approximations. To assess the quality of the model, we compare detailed equilibrium node states with results from realistic simulations of wireless networks. We find very c…
As the explosive growth of the ISM band usage continues, there are many scenarios where different systems operate in the same place at the same time. One of growing concerns is the coexistence of heterogeneous wireless network systems. For the successful deployment of mission-critical systems such as wireless sensor networks, it is required to provide a solution for the coexistence. In this paper, we propose a new scheme using inter packet delay for the coexistence of IEEE 802.15.4 LRWPAN and IEEE 802.11b WLAN. To evaluate the effectiveness of the proposed scheme, measurement and simulation st…
Millimeter-wave (mmWave) with large spectrum available is considered as the most promising frequency band for future wireless communications. The IEEE 802.11ad and IEEE 802.11ay operating on 60 GHz mmWave are the two most expected wireless local area network (WLAN) technologies for ultra-high-speed communications. For the IEEE 802.11ay standard still under development, there are plenty of proposals from companies and researchers who are involved with the IEEE 802.11ay task group. In this survey, we conduct a comprehensive review on the medium access control layer (MAC) related issues for the I…
With the ever-increasing demand for wireless traffic and quality of serives (QoS), wireless local area networks (WLANs) have developed into one of the most dominant wireless networks that fully influence human life. As the most widely used WLANs standard, Institute of Electrical and Electronics Engineers (IEEE) 802.11 will release the upcoming next generation WLANs standard amendment: IEEE 802.11ax. This article comprehensively surveys and analyzes the application scenarios, technical requirements, standardization process, key technologies, and performance evaluations of IEEE 802.11ax. Startin…
The end-to-end throughput of multi-hop communication in wireless ad hoc networks is affected by the conflict between forwarding nodes. It has been shown that sending more packets than maximum achievable end-to-end throughput not only fails to increase throughput, but also decreases throughput owing to high contention and collision. Accordingly, it is of crucial importance for a source node to know the maximum end-to-end throughput. The end-to-end throughput depends on multiple factors, such as physical layer limitations, MAC protocol properties, routing policy and nodes distribution. There hav…
This paper presents a description of the existing wireless technology Wi-Fi and WiMAX, and try to compare Wi-Fi (IEEE 802.11) and WiMAX (IEEE 802.16), with respect to which technology provides a better solution to build a wireless access infrastructure. Each technology is evaluated based on some key characteristics. This paper concludes with a statement of, which technology will be the best and most cost effective solution to end user.
This paper presents a performance analysis for the bandwidth allocation in IEEE 802.16 broadband wireless access (BWA) networks considering the packet-level quality-of-service (QoS) constraints. Adaptive Modulation and Coding (AMC) rate based on IEEE 802.16 standard is used to adjust the transmission rate adaptively in each frame time according to channel quality in order to obtain multiuser diversity gain. To model the arrival process and the traffic source we use the Batch Markov Arrival Process (BMAP), which enables more realistic and more accurate traffic modelling. We determine analytical…
Over the last decade, the IEEE 802.11 has emerged as the most popular protocol in the wireless domain. Since the release of the first standard version, several amendments have been introduced in an effort to improve its throughput performance, with the most recent one being the IEEE 802.11n extension. In this work, we present detailed experimentally obtained measurements that evaluate the energy efficiency of the base standard in comparison with the latest 802.11n version. Moreover, we investigate the impact of various MAC layer enhancements, both vendor specific and standard compliant ones, o…
Network technologies are traditionally centered on wireline solutions. Wireless broadband technologies nowadays provide unlimited broadband usage to users that have been previously offered simply to wireline users. In this paper, we discuss some of the upcoming standards of one of the emerging wireless broadband technology i.e. IEEE 802.11. The newest and the emerging standards fix technology issues or add functionality that will be expected to overcome many of the current standing problems with IEEE 802.11.
The most important standard in wireless local area networks is IEEE 802.11. This is why much of the research work for the enhancement of wireless network is usually based on the behavior of IEEE 802.11 protocol. However, some of the ways in which IEEE 802.11 medium access control layer behaves is still unreliable to guarantee quality of service. For instance, medium access control layer packet delay, jitter and packet loss rate still remain a challenge. The main objective of this research is to propose an accurate estimation of the medium access control layer packet delay distribution for IEEE…
We consider a tree network spanning a set of source nodes that generate measurement packets, a set of additional relay nodes that only forward packets from the sources, and a data sink. We assume that the paths from the sources to the sink have bounded hop count. We assume that the nodes use the IEEE 802.15.4 CSMA/CA for medium access control, and that there are no hidden terminals. In this setting, starting with a set of simple fixed point equations, we derive sufficient conditions for the tree network to approximately satisfy certain given QoS targets such as end-to-end delivery probability …
The most essential part of Internet of Things (IoT) infrastructure is the wireless communication system that acts as a bridge for the delivery of data and control messages. However, the existing wireless technologies lack the ability to support a huge amount of data exchange from many battery driven devices spread over a wide area. In order to support the IoT paradigm, the IEEE 802.11 standard committee is in process of introducing a new standard, called IEEE 802.11ah. This is one of the most promising and appealing standards, which aims to bridge the gap between traditional mobile networks an…
Wireless networks are very popular nowadays. Wireless Local Area Network (WLAN) that uses the IEEE 802.11 standard and WiMAX (Worldwide Interoperability for Microwave Access) that uses the IEEE 802.16 standard are networks that we want to explore. WiMAX has been developed over 10 years, but it is still unknown to most people. However compared to WLAN, it has many advantages in transmission speed and coverage area. This paper will introduce these two technologies and make comparisons between WiMAX and WiFi. In addition, wireless network coexistence of WLAN and WiMAX will be explored through sim…
Opportunistic Routing (OR) is a novel routing technique for wireless mesh networks that exploits the broadcast nature of the wireless medium. OR combines frames from multiple receivers and therefore creates a form of Spatial Diversity, called MAC Diversity. The gain from OR is especially high in networks where the majority of links has a high packet loss probability. The updated IEEE 802.11n standard improves the physical layer with the ability to use multiple transmit and receive antennas, i.e. Multiple-Input and Multiple-Output (MIMO), and therefore already offers spatial diversity on the ph…
Wi-Fi is among the most successful wireless technologies ever invented. As Wi-Fi becomes more and more present in public and private spaces, it becomes natural to leverage its ubiquitousness to implement groundbreaking wireless sensing applications such as human presence detection, activity recognition, and object tracking, just to name a few. This paper reports ongoing efforts by the IEEE 802.11bf Task Group (TGbf), which is defining the appropriate modifications to existing Wi-Fi standards to enhance sensing capabilities through 802.11-compliant waveforms. We summarize objectives and timelin…
Although the performance of the medium access control (MAC) of the IEEE 802.15.4 has been investigated under the assumption of ideal wireless channel, the understanding of the cross-layer dynamics between MAC and physical layer is an open problem when the wireless channel exhibits path loss, multi-path fading, and shadowing. The analysis of MAC and wireless channel interaction is essential for consistent performance prediction, correct design and optimization of the protocols. In this paper, a novel approach to analytical modeling of these interactions is proposed. The analysis considers simul…
Unmanned Aerial Vehicle (UAV) has extreme potential to change the future wireless sensor network (WSN). The UAV-based WSN performances is influenced by different system parameters. To investigate this issue, it is necessary to analyses the effects of system parameters on the UAV-based WSN performance. In this paper, we design a NS-3 script for UAV-based WSN according to the hierarchical manner of TCP/IP model. We configure all layers by using NS-3 model objects and set and modify the values used by objects to investigate the effects of system parameters (access mechanism, UAV trajectory patter…
The IEEE 802.11 backoff algorithm is very important for controlling system throughput over contentionbased wireless networks. For this reason, there are many studies on wireless network performance focus on developing backoff algorithms. However, most existing models are based on saturated traffic loads, which are not a real representation of actual network conditions. In this paper, a dynamic control backoff time algorithm is proposed to enhance both delay and throughput performance of the IEEE 802.11 distributed coordination function. This algorithm considers the distinction between high and…
IEEE 802.11ax-2019 will replace both IEEE 802.11n-2009 and IEEE 802.11ac-2013 as the next high-throughput Wireless Local Area Network (WLAN) amendment. In this paper, we review the expected future WLAN scenarios and use-cases that justify the push for a new PHY/MAC IEEE 802.11 amendment. After that, we overview a set of new technical features that may be included in the IEEE 802.11ax-2019 amendment and describe both their advantages and drawbacks. Finally, we discuss some of the network-level functionalities that are required to fully improve the user experience in next-generation WLANs and no…
The Wireless Gigabit Alliance (WiGig) and IEEE 802.11ad are developing a multigigabit wireless personal and local area network (WPAN/WLAN) specification in the 60 GHz millimeter wave band. Chipset manufacturers, original equipment manufacturers (OEMs), and telecom companies are also assisting in this development. 60 GHz millimeter wave transmission will scale the speed of WLANs and WPANs to 6.75 Gbit/s over distances less than 10 meters. This technology is the first of its kind and will eliminate the need for cable around personal computers, docking stations, and other consumer electronic devi…
Critical and public safety operations require real-time data transfer from the incident area(s) to the distant operations command center going through the evacuation and medical support areas. Any delay in communication may cause significant loss. In some cases, it is anticipated that the existing communication infrastructures can be damaged or out-of-service. It is thus required to deploy tactical ad-hoc networks to cover the operation zones. Routing data over the deployed network is a significant challenge with consideration to the operations conditions. In this paper we evaluate the perform…
The increasing trend in wireless Internet access has been boosted by IEEE 802.11. However, the application scenarios are still limited by its short radio range. Stub Wireless Multi-hop Networks (WMNs) are a robust, flexible, and cost-effective solution to the problem. Yet, typically they are formed by single radio mesh nodes and suffer from hidden node, unfairness, and scalability problems. We propose a simple multi-radio, multi-channel WMN solution, named Wi-Fi network Infrastructure eXtension - Dual-Radio (WiFIX-DR), to overcome these problems. WiFIX-DR reuses IEEE 802.11 built-in mechanisms…
In the recent years, WiFi standard has been used to develop different kind of wireless networks due to its flexibility and the availability of cheap off the shelf hardware. Even if the standard itself lacks mobility support, it has been used in networks with mobile nodes. When mobility is involved, a fast handoff is of paramount importance, especially with multimedia applications. The current IEEE 802.11 standard does not provide any specification about how the handoff should take place. In this paper we propose a handoff scheme optimized for networks providing wireless connection to mass tran…
This paper focuses on contention-based Medium Access Control (MAC) protocols used in Wireless Local Area Networks (WLANs). We propose a novel MAC protocol called Adaptive Backoff Tuning MAC (ABTMAC) based on IEEE 802.11 DCF. In our proposed MAC protocol, we utilize a fixed transmission attempt rate and each node dynamically adjusts its backoff window size considering the current network status. We determined the appropriate transmission attempt rate for both cases where the Request-To-Send/Clear-To-Send (RTS/CTS) mechanism was and was not employed. Robustness against performance degradation ca…
Mobile WiMAX (Worldwide Interoperability for Microwave Access) is being touted as the most promising and potential broadband wireless technology. And the popularity rate has been surging to newer heights as the knowledge-backed service era unfolds steadily. Especially Mobile WiMAX is being projected as a real and strategic boon for developing counties such as India due to its wireless coverage acreage is phenomenally high. Mobile WiMAX has spurred tremendous interest from operators seeking to deploy high-performance yet cost-effective broadband wireless networks. The IEEE 802.16e standard base…
In this paper we develop an intergraded model for request mechanism and data transmission in the uplink phase in the presence of channel noise. This model supports quality of service. The wireless channel is prone to many impairments. Thus, certain techniques have to be developed to deliver data to the receiver. We calculated the performance parameters for single and multichannel wireless networks, like the requests throughput, data throughput and the requests acceptance probability and data acceptance probability. The proposed model is general model since it can be applied to different wirele…
IEEE 802.1 Time-sensitive Networking~(TSN) standards are envisioned to replace legacy network protocols in critical domains to ensure reliable and deterministic communication over off-the-shelf Ethernet equipment. However, they lack security countermeasures and can even impose new attack vectors that may lead to hazardous consequences. This paper presents the first open-source security monitoring and intrusion detection mechanism, TSNZeek, for IEEE 802.1 TSN protocols. We extend an existing monitoring tool, Zeek, with a new packet parsing grammar to process TSN data traffic and a rule-based at…
The rapid advances in sensors and ultra-low power wireless communication has enabled a new generation of wireless sensor networks: Wireless Body Area Networks (WBAN). To the best of our knowledge the current paper is the first to address broadcast in WBAN. We first analyze several broadcast strategies inspired from the area of Delay Tolerant Networks (DTN). The proposed strategies are evaluated via the OMNET++ simulator that we enriched with realistic human body mobility models and channel models issued from the recent research on biomedical and health informatics. Contrary to the common expec…
Dealing with massively crowded scenarios is one of the most ambitious goals of next-generation wireless networks. With this goal in mind, the IEEE 802.11ax amendment includes, among other techniques, the Spatial Reuse (SR) operation. The SR operation encompasses a set of unprecedented techniques {that are expected to significantly boost Wireless Local Area Networks (WLANs) performance in dense environments}. In particular, the main objective of the SR operation is to maximize the utilization of the medium by increasing the number of parallel transmissions. Nevertheless, due to the novelty of t…
