When applied to a single nucleon, nuclear energy density functionals may yield a non-vanishing internal energy thus implying that the nucleon is interacting with itself. It is shown how to avoid this unphysical feature for semi-local phenomenological functionals containing all possible bilinear combinations of local densities and currents up to second order in the derivatives. The method outlined in this Rapid Communication could be easily extended to functionals containing higher order terms, and could serve as a guide for constraining the time-odd part of the functional.
We develop an energy functional with shell-model occupations as the relevant degrees of freedom and compute nuclear masses across the nuclear chart. The functional is based on Hohenberg-Kohn theory with phenomenologically motivated terms. A global fit of the 17-parameter functional to nuclear masses yields a root-mean-square deviation of χ= 1.31 MeV. Nuclear radii are computed within a model that employs the resulting occupation numbers.
Because of the rotational invariance of the nuclear Hamiltonian, there exists a density functional for nuclei that depends only on two scalar densities. Practical calculations boil down to radial, one-dimensional ones.
The spin density matrix (SDM) used in atomic and molecular physics is revisited for nuclear physics, in the context of the radial density functional theory. The vector part of the SDM defines a "hedgehog" situation, which exists only if nuclear states contain some amount of parity violation.
Calculations of nuclear masses, using nuclear density functional theory, are presented for even-even nuclei spanning the nuclear chart. The resulting binding energy differences can be interpreted in terms of valence proton-neutron interactions. These are compared globally, regionally, and locally with empirical values. Overall, excellent agreement is obtained. Discrepancies highlight neglected degrees of freedom and can point to improved density functionals.
This note describes five subjects of some interest for the density functional theory in nuclear physics. These are, respectively, i) the need for concave functionals, ii) the nature of the Kohn-Sham potential for the radial density theory, iii) a proper implementation of a density functional for an "intrinsic" rotational density, iv) the possible existence of a potential driving the square root of the density, and v) the existence of many models where a density functional can be explicitly constructed.
A nuclear density functional can be used to find the binding energy and shell structure of nuclei and the energy gap in superconducting nuclear matter. In this paper, we study the possible application of a nuclear density functional theory to nuclear astrophysics. From energy density functional theory, we can deduce the interaction between nucleons to find a rough estimate of the charge radius of the specific nuclei. Compared to the Finite-Range Thomas Fermi model, we include three-body forces, which might be important at densities several times that of nuclear matter density. We also add the …
In the field of Energy Density Functionals (EDF) used in nuclear structure and dynamics, one of the unsolved issues is the stability of the functional. Numerical issues aside, some EDFs are unstable with respect to particular perturbations of the nuclear ground-state density. The aim of this contribution is to raise questions about the origin and nature of these instabilities, the techniques used to diagnose and prevent them, and the domain of density functions in which one should expect a nuclear EDF to be stable.
A model is developed, based on the density functional perturbation theory and the inverse Kohn-Sham method, that can be used to improve relativistic nuclear energy density functionals towards an exact but unknown Kohn-Sham exchange-correlation functional. The improved functional is determined by empirical exact ground-state densities of finite systems. A test of the model and an illustrative calculation are performed, starting from two different approximate functionals, to reproduce the parameters and density dependence of a target functional, using exact ground-state densities of symmetric N=…
We carried out a simulation of heavy ion collision using a time-dependent density functional theory. We call it the canonical-basis time-dependent Hartree-Fock-Bogoliubov theory (Cb-TDHFB) which can describe nuclear dynamics in three-dimensional coordinate space, treating nuclear pairing correlation. We simulate 20O+20O collision using the Cb-TDHFB with a contact-type pairing functional, and show the behavior of gap energy which is decreasing and vibrating while colliding.
We discuss some of the challenges that the DFT community faces in its quest for the truly universal energy density functional applicable over the entire nuclear chart.
An electron density functional approach for the calculation of the nuclear multipole moments is presented. The electronic matrix elements entering the experimentally observed hyperfine electron-nucleus interaction constants in atoms are expressed in terms of the electron density functionals of the charge or spin distributions. In principle, the construction of the charge or spin distribution density functionals can be obtained by means of every relativistic or non-relativistic quantum-mechanical or DFT method. The electronic matrix elements for all the electronic operators of the existing Hami…
The nuclear magnetic moment is an important physical observable and serves as a useful tool for the stringent test of nuclear models. For the past decades, the covariant density functional theory and its extension have been proved to be successful in describing the nuclear ground-states and excited states properties. However, a long-standing problem is its failure to predict magnetic moments. This article reviews the recent progress in the description of the nuclear magnetic moments within the covariant density functional theory. In particular, the magnetic moments of spherical odd-A nuclei wi…
We present background concepts of the nuclear density functional theory (DFT) and applications of the time-dependent DFT with the Skyrme energy functional for nuclear response functions. Practical methods for numerical applications of the time-dependent Hartree-Fock-Bogoliubov theory (TDHFB) are proposed; finite amplitude method and canonical-basis TDHFB. These approaches are briefly reviewed and some numerical applications are shown to demonstrate their feasibility.
The nuclear $α$ decay of heavy nuclei is investigated based on the nuclear energy density functional, which leads to the $α$ potential inside the parent nucleus in terms of the proton and neutron density profiles of the daughter nucleus. We use the Skyrme force model, Gogny force model, and relativistic mean field model to get the nucleon density profiles inside heavy nuclei. Once the nucleon density profiles are determined, the parameters of the nuclear $α$ potential are fitted to the observed $α$ decay half-lives of heavy nuclei. This approach is then applied to predict unknown $α$ decay hal…
A microscopic framework of nuclear energy density functionals is reviewed, which establishes a direct relation between low-energy QCD and nuclear structure, synthesizing effective field theory methods and principles of density functional theory. Guided by two closely related features of QCD in the low-energy limit: a) in-medium changes of vacuum condensates, and b) spontaneous breaking of chiral symmetry; a relativistic energy density functional is developed and applied in studies of ground-state properties of spherical and deformed nuclei.
We propose a method for microscopic calculations of nuclear ground-state properties in the framework of density functional theory. We discuss how the density functional is equivalent to the effective action for the density, thereby establishing a constructive framework for density functional calculations from nuclear forces. The presented approach starts from non-interacting nucleons in a background potential (a simple approximation for the mean field). The nuclear forces are then gradually turned on, while the background potential is removed. The evolution equation yields the ground-state ene…
We present the basic concepts and our recent developments in the density functional approaches with the Skyrme functionals for describing nuclear dynamics at low energy. The time-dependent density-functional theory (TDDFT) is utilized for the exact linear response with an external perturbation. For description of collective dynamics beyond the perturbative regime, we present a theory of a decoupled collective submanifold to describe for a slow motion based on the TDDFT. Selected applications are shown to demonstrate the quality of their performance and feasibility. Advantages and disadvantages…
A chiral model based on nucleons interacting via boson exchange is investigated. Fluctuation effects are included consistently beyond the mean-field approximation in the framework of the functional renormalization group. The liquid-gas phase transition of symmetric nuclear matter is studied in detail. No sign of a chiral restoration transition is found up to temperatures of about 100 MeV and densities of at least three times the density of normal nuclear matter. Moreover, the model is extended to asymmetric nuclear matter and the constraints from neutron star observations are discussed.
We review the notion of symmetry breaking and restoration within the frame of nuclear energy density functional methods. We focus on key differences between wave-function- and energy-functional-based methods. In particular, we point to difficulties encountered within the energy functional framework and discuss new potential constraints on the underlying energy density functional that could make the restoration of broken symmetries better formulated within such a formalism. We refer to Ref.~\cite{duguet10a} for details.
We present the first application of a new approach, proposed in [Journal of Physics G: Nuclear and Particle Physics, 43, 04LT01 (2016)] to derive coupling constants of the Skyrme energy density functional (EDF) from ab initio Hamiltonian. By perturbing the ab initio Hamiltonian with several functional generators defining the Skyrme EDF, we create a set of metadata that is then used to constrain the coupling constants of the functional. We use statistical analysis to obtain such an ab initio-equivalent Skyrme EDF. We find that the resulting functional describes properties of atomic nuclei and i…
We study a particular class of relativistic nuclear energy density functionals in which only nucleon degrees of freedom are explicitly used in the construction of effective interaction terms. Short-distance (high-momentum) correlations, as well as intermediate and long-range dynamics, are encoded in the medium (nucleon density) dependence of the strength functionals of an effective interaction Lagrangian. Guided by the density dependence of microscopic nucleon self-energies in nuclear matter, a phenomenological ansatz for the density-dependent coupling functionals is accurately determined in s…
Within the nuclear density functional theory (DFT) we study the effect of reflection-asymmetric shapes on ground-state binding energies and binding energy differences. To this end, we developed the new DFT solver AxialHFB that uses an approximate second-order gradient to solve the Hartree-Fock-Bogoliubov equations of superconducting DFT with the quasi-local Skyrme energy density functionals. Illustrative calculations are carried out for even-even isotopes of radium and thorium.
Response functions of infinite nuclear matter with arbitrary isospin asymmetry are studied in the framework of the random phase approximation. The residual interaction is derived from a general nuclear Skyrme energy density functional. Besides the usual central, spin-orbit and tensor terms it could also include other components as new density-dependent terms or three-body terms. Algebraic expressions for the response functions are obtained from the Bethe-Salpeter equation for the particle-hole propagator. Applications to symmetric nuclear matter, pure neutron matter and asymmetric nuclear matt…
A study of parameter sensitivity of nuclear energy density functionals, initiated in the first part of this work \cite{NV.16}, is extended by the inclusion of data on ground-state properties of finite nuclei in the application of the manifold boundary approximation method (MBAM). Density functionals used in self-consistent mean-field calculations, and nuclear structure models based on them, are generally "sloppy" and exhibit an exponential range of sensitivity to parameter variations. Concepts of information geometry are used to identify the presence of effective functionals of lower dimension…
A non-relativisitic nuclear density functional theory is constructed, not as usual, from an effective density dependent nucleon-nucleon force but directly introducing in the functional results from microscopic nuclear and neutron matter Bruckner G-matrix calculations at various densities. A purely phenomenological finite range part to account for surface properties is added. The striking result is that only four to five adjustable parameters, spin-orbit included, suffice to reproduce nuclear binding energies and radii with the same quality as obtained with the most performant effective forces,…
The origin of the nuclear tensor interaction in the covariant energy density functional (EDF) is presented in this work, associated with the Fock diagrams of Lorentz scalar and vector couplings. With this newly obtained relativistic formalism of the nuclear tensor interaction, more distinct tensor effects are found in the Fock diagrams of the Lorentz scalar and vector couplings, as compared to the Lorentz pseudo-vector and tensor channels. A unified and self-consistent treatment on both the nuclear tensor and spin-orbit interactions, which dominate the spin-dependent features of the nuclear fo…
Reliable predictions of nuclear properties are needed as much to answer fundamental science questions as in applications such as reactor physics or data evaluation. Nuclear density functional theory is currently the only microscopic, global approach to nuclear structure that is applicable throughout the nuclear chart. In the past few years, a lot of effort has been devoted to setting up a general methodology to assess theoretical uncertainties in nuclear DFT calculations. In this paper, we summarize some of the recent progress in this direction. Most of the new material discussed here will be …
The formalism of linear response theory for a Skyrme functional including spin-orbit and tensor terms is generalized to the case of infinite nuclear matter with arbitrary isospin asymmetry. Response functions are obtained by solving an algebraic system of equations, which is explicitly given. Spin-isospin strength functions are analyzed varying the conditions of density, momentum transfer, asymmetry and temperature. The presence of instabilities, including the spinodal one, is studied by means of the static susceptibility.
The Skyrme nuclear energy density functional theory (DFT) is used to model neutron-induced fission in actinides. This paper focuses on the numerical implementation of the theory. In particular, it reports recent advances in DFT code development on leadership class computers, and presents a detailed analysis of the numerical accuracy of DFT solvers for near-scission calculations.
Relativistic energy density functionals (EDF) have become a standard tool for nuclear structure calculations, providing a complete and accurate, global description of nuclear ground states and collective excitations. Guided by the medium dependence of the microscopic nucleon self-energies in nuclear matter, semi-empirical functionals have been adjusted to the nuclear matter equation of state and to bulk properties of finite nuclei, and applied to studies of arbitrarily heavy nuclei, exotic nuclei far from stability, and even systems at the nucleon drip-lines. REDF-based structure models have a…
Basic issues of the time-dependent density-functional theory are discussed, especially on the real-time calculation of the linear response functions. Some remarks on the derivation of the time-dependent Kohn-Sham equations and on the numerical methods are given.
Background: The Skyrme energy density functional is widely used in mean-field calculations of nuclear structure and dynamics. However, its reliance on phenomenology may compromise its isovector properties and its performance for exotic nuclear systems. Purpose: This work investigates the possibility of removing some phenomenology from the density functional by drawing on the high-energy degrees-of-freedom of the quark-meson coupling (QMC) model. The QMC model has microscopically derived isovector properties and far fewer adjustable parameters. Method: The parameters of the Skyrme interaction a…
We present the formalism of linear response theory both at zero and finite temperature in the case of asymmetric nuclear matter excited by an isospin flip probe. The particle-hole interaction is derived from a general Skyrme functional that includes spin-orbit and tensor terms. Response functions are obtained by solving a closed algebraic system of equations. Spin strength functions are analyzed for typical values of density, momentum transfer, asymmetry and temperature.
Naive dimensional analysis based on chiral effective theory, when adapted to nuclear energy density functionals, prescribes natural units and a hierarchy of contributions that could be used to constrain fits of generalized functionals. By applying these units, a large sample of Skyrme parametrizations is examined for naturalness, which is signaled by dimensionless coupling constants of order one. The bulk of the parameters are found to be natural, with an underlying scale consistent with other determinations. Significant deviations from unity are associated with deficiencies in the correspondi…
The nuclear landscape has been investigated within the triaxial relativistic Hartree-Bogoliubov theory with the PC-PK1 density functional, and the beyond-mean-field dynamical correlation energies are taken into account by a microscopically mapped five-dimensional collective Hamiltonian without additional free parameters. The effects of triaxial deformation and dynamical correlations on the nuclear landscape are analyzed. The present results provide the best description of the experimental binding energies, in particular for medium and heavy mass regions, in comparison with the results obtained…
Nuclear density functional theory (DFT) is the tool of choice in describing properties of complex nuclei and intricate phases of bulk nucleonic matter. It is a microscopic approach based on an energy density functional representing the nuclear interaction. An attractive feature of nuclear DFT is that it can be applied to both finite nuclei and pasta phases appearing in the inner crust of neutron stars. While nuclear pasta clusters in a neutron star can be easily characterized through their density distributions, the level of clustering of nucleons in a nucleus can often be difficult to assess.…
The nuclear symmetry energy represents a response to the neutron-proton asymmetry. In this survey we discuss various aspects of symmetry energy in the framework of nuclear density functional theory, considering both non-relativistic and relativistic self-consistent mean-field realizations side-by-side. Key observables pertaining to bulk nucleonic matter and finite nuclei are reviewed. Constraints on the symmetry energy and correlations between observables and symmetry-energy parameters, using statistical covariance analysis, are investigated. Perspectives for future work are outlined in the co…
Concepts from information geometry are used to analyse parameter sensitivity for a nuclear energy density functional, representative of a class of semi-empirical functionals that start from a microscopically motivated ansatz for the density dependence of the energy of a system of protons and neutrons. It is shown that such functionals are sloppy, characterized by an exponential range of sensitivity to parameter variations. Responsive to only a few stiff parameter combinations, they exhibit an exponential decrease of sensitivity to variations of the remaining soft parameters. By interpreting th…
A new Skyrme functional has been developed with tensor term guided by ab initio relativistic Brueckner-Hartree-Fock (RBHF) studies on neutron-proton drops. Instead of extracting information on the tensor force from experimental single-particle energy splittings, the RBHF calculations do not contain beyond mean-field effects such as particle-vibration coupling and therefore the information on the tensor force can be obtained without ambiguities. The new functional gives a good description of nuclear ground-state properties as well as various giant resonances. The description for the evolution o…
Equation of state of dense nuclear matter is explored in the KIDS density functional theory. Parameters of the equation of state which are coefficients of the energy density expanded in powers of $(ρ- ρ_0)/3ρ_0$ where $ρ$ is the nuclear matter density and $ρ_0$ is its density at saturation are constrained by using both nuclear data and the mass-radius relation of the neutron star determined from the modern astronomy. We find that the combination of both data can reduce the uncertainty in the equation of state parameters significantly. We confirm that the newly constrained parameters reproduce …
In this work, we study the odd-even effect in binding energies and charge radii, and systematic behavior of differential radii, to identify the underlying components of the effective nuclear interaction. We apply nuclear density functional theory using a family of Fayans and Skyrme energy density functionals fitted to similar datasets but using different optimization protocols. We inspect various correlations between differential charge radii, odd-even staggering in energies and radii, and nuclear matter properties. Detailed analysis is carried out for medium-mass and heavy semi-magic nuclei w…
The assessment of the global performance of the state-of-the-art covariant energy density functionals and related theoretical uncertainties in the description of ground state observables has recently been performed. Based on these results, the correlations between global description of binding energies and nuclear matter properties of covariant energy density functionals have been studied in this contribution.
We study symmetric nuclear matter at finite temperature, with particular emphasis on the liquid-gas phase transition. We use a standard covariance analysis to propagate statistical uncertainties from the density functional to the thermodynamic properties. We use four functionals with known covariance matrices to obtain as wide a set of results as possible. Our findings suggest that thermodynamical properties are very well constrained by fitting data at zero temperature. The propagated statistical errors in the liquid-gas phase transition parameters are relatively small.
Asymmetric nuclear matter is investigated in the low density region below the nuclear saturation density. Microscopic calculations based on the Dirac Brueckner Hartree-Fock (DBHF) approach with realistic nucleon-nucleon potentials are used to adjust a low density functional. This functional is constructed on a density expansion of the relativistic mean field theory which allows a clear interpretation of the role of the mesons to the equation of state. It is shown that a correction term should be added to the functional in order to take into account the effects beyond the mean field. Two functi…
The results of systematic calculations of isospin-symmetry-breaking corrections to superallowed beta-decays based on the self-consistent isospin- and angular-momentum-projected nuclear density functional theory (DFT) are reviewed with an emphasis on theoretical uncertainties of the model. Extensions of the formalism towards no core shell model approach with basis cutoff scheme dictated by the self-consistent particle-hole DFT solutions will be also discussed.
First, we briefly outline some aspects of the starting project to design non-empirical energy functionals based on low-momentum vacuum interactions and many-body perturbation theory. Second, we present results obtained within an approximation of such a scheme where the pairing part of the energy density functional is constructed at first order in the nuclear plus Coulomb two-body interaction. We discuss in detail the physics of the odd-even mass staggering and the necessity to compute actual odd-even mass differences to analyze it meaningfully.
The correlations between global description of the ground state properties (binding energies, charge radii) and nuclear matter properties of the state-of-the-art covariant energy density functionals have been studied. It was concluded that the strict enforcement of the constraints on the nuclear matter properties (NMP) defined in Ref.\ \cite{RMF-nm} will not necessary lead to the functionals with good description of the binding energies and other ground and excited state properties. In addition, it will not substantially reduce the uncertainties in the predictions of the binding energies in ne…
Density functional theory (DFT) became a universal approach to compute ground-state and excited configurations of many-electron systems held together by an external one-body potential in condensed-matter, atomic, and molecular physics. At present, the DFT strategy is also intensely studied and applied in the area of nuclear structure. The nuclear DFT, a natural extension of the self-consistent mean-field theory, is a tool of choice for computations of ground-state properties and low-lying excitations of medium-mass and heavy nuclei. Over the past thirty-odd years, a lot of experience was accum…
We discuss different approaches to the problem of reproducing the observed features of nuclear single-particle (s.p.) spectra. In particular, we analyze the dominant energy peaks, and the single-particle strength fragmentation, using the example of neutron states in 208Pb. Our main emphasis is the interpretation of that fragmentation as due to particle-vibration coupling (PVC). We compare with recent Energy Density Functional (EDF) approaches, and try to present a critical perspective.
Radii of charge and neutron distributions are fundamental nuclear properties. They depend on both nuclear interaction parameters related to the equation of state of infinite nuclear matter and on quantal shell effects, which are strongly impacted by the presence of nuclear surface. In this work, by studying the dependence of charge and neutron radii, and neutron skin, on nuclear matter parameters, we assess different mechanisms that drive nuclear sizes. We apply nuclear density functional theory using a family of Skyrme functionals obtained by means of different optimization protocols targetin…
We calculate the equation of state of nuclear matter in the self-consistent T-matrix scheme including three-body nuclear interactions. We study the effect of the three-body force on the self-energies and spectral functions of nucleons in medium.
The nuclear energy density functional method at finite temperature is a useful tool for studies of nuclear structure at high excitation, and also for researches of nuclear matter involved in explosive stellar phenomena and neutron stars. However, its unrestricted calculation requires large computational costs for the three-dimensional coordinate-space solvers, especially for the Hamiltonian matrix diagonalization and (or) the Gram-Schmidt orthonormalization of the single-particle wave functions. We test numerical performance of the Fermi operator expansion method, that requires neither the dia…
The Charge-Symmetry-Breaking (CSB) character of the nucleon-nucleon interaction is well established. This work presents two different ways of introducing such effects into a nuclear Energy Density Functional (EDF). CSB terms are either coming from the effective theory expansion or are derived from electromagnetic mixing of $ρ^0$ and $ω$ mesons. These terms are then introduced to Skyrme and Quark-Meson-Coupling EDFs, respectively.
We propose a new approach to determine the strength of the charge symmetry breaking (CSB) term in the framework of nuclear density functional theory. It is shown that once ab initio calculations are available including accurate description of isospin symmetry breaking terms in medium and heavy nuclei, the mass difference of mirror nuclei as well as the neutron-skin thickness of doubly-closed-shell nuclei can be used to constrain the strength of the CSB interaction with an uncertainty less than $ 6 \, \% $, separately from other isospin symmetry breaking forces. This method opens a new vista of…
