A new conception of the wavelength division multiplexing on the basis of the two-dimensional photonic crystal was developed. The photonic crystals band structures were investigated in details. The method for the synthesis of the two-channel wavelength division multiplexer on the basis of two dimensional photonic crystals was developed using this method the device was synthesized. The spectral characteristics of the device and its dynamic pulse pattern response were investigated.
In the work, the new method for the design of the wavelength division multiplexer on the basis of 2D photonic crystal integrated circuit for the ultra-short pulses channel separation is proposed and investigated. The method is based on the analysis of full photonic bandgap maps that allows defining the ultra-short pulse demultiplexer parameters selection. For the method approbation, there was synthesized the device in which the wideband filters are used for the channel separation. As it was expected, the device effectively separates 50 fs pulse channels with 1.31 and 1.55 microns wavelengths. …
In this paper, we propose a pre-trained-combined neural network (PTCN) as a comprehensive solution to the inverse design of an integrated photonic circuit. By utilizing both the initially pre-trained inverse and forward model with a joint training process, our PTCN model shows remarkable tolerance to the quantity and quality of the training data. As a proof of concept demonstration, the inverse design of a wavelength demultiplexer is used to verify the effectiveness of the PTCN model. The correlation coefficient of the prediction by the presented PTCN model remains greater than 0.974 even when…
We characterize the frequency response of channel-interleaved photonic analog-to-digital converters (CI-PADCs) theoretically and experimentally. The CI-PADC is composed of a photonic frontend for photonic sampling and an electronic backend for quantization. The photonic frontend includes a photonic sampling pulse generator for directly high-speed sampling and an optical time-division demultiplexer (OTDM) for channel demultiplexing. It is found that the frequency response of the CI-PADC is influenced by both the photonic sampling pulses and the OTDM, of which the combined impact can be characte…
Atmospheric turbulences can generate scintillation or beam wandering phenomena that impairs free space optical (FSO) communication. In this paper, we propose and demonstrate a proof-of-concept FSO communication receiver based on a spatial demultiplexer and a photonic integrated circuit coherent combiner. The system collects the light from several Hermite Gauss spatial modes and coherently combine on chip the energy from the different modes into a single output. The FSO receiver is characterized with a wavefront emulator bench that generates arbitrary phase and intensity patterns. The multimode…
Two-dimensional plasmonic demultiplexers for surface plasmon polaritons (SPPs), which consist of concentric grooves on a gold film, are proposed and experimentally demonstrated to realize light-SPP coupling, effective dispersion and multiple-channel SPP guiding. A resolution as high as 10 nm is obtained. The leakage radiation microscopy imaging shows that the SPPs of different wavelengths are focused and routed into different SPP strip waveguides. The plasmonic demultiplexer can thus serve as a wavelength division multiplexing element for integrated plasmonic circuit and also as a plasmonic sp…
In this paper,we propose a four channel Dense Wavelength Division Multiplexing demultiplexer with two dimensional photonic crystal square resonant cavity that fulfill the ITU-T recommendation of G.694.1 DWDM systems.DWDM demultiplexer consists of a waveguide and Microscopic Square Resonant (MSR) cavity to enable filtering of the desired wavelength. The MSR cavity design has inner rods, outer rods and coupling rods. As the radius of the inner rod in MSR cavity changes, the cavity has the ability to filter different ITU.T G.6941 standard wavelengths like 1555.3 nm, 1555.5 nm, 1555.7 nm, and 1555…
Nanoantennas for highly efficient excitation and manipulation of surface waves at nanoscale are key elements of compact photonic circuits. However, previously implemented designs employ plasmonic nanoantennas with high Ohmic losses, relatively low spectral resolution, and complicated lithographically made architectures. Here we propose an ultracompact and simple dielectric nanoantenna (silicon nanosphere) allowing for both directional launching of surface plasmon polaritons on a thin gold film and their demultiplexing with a high spectral resolution. We show experimentally that mutual interfer…
Integrated photonic devices are poised to play a key role in a wide variety of applications, ranging from optical interconnects and sensors to quantum computing. However, only a small library of semi-analytically designed devices are currently known. In this paper, we demonstrate the use of an inverse design method that explores the full design space of fabricable devices and allows us to design devices with previously unattainable functionality, higher performance and robustness, and smaller footprints compared to conventional devices. We designed a silicon wavelength demultiplexer that split…
Artificially built periodic optical structures in dielectric and metallic media have generated considerable interest due to their potential for optical device miniaturization. In this context plasmonics, i.e., optics based on surface plasmon polaritons (SPPs) offers new exciting prospects. SPPs are hybrid light/electron surface waves at the interface between a dielectric and a metal and as such hold the potential for 2D optical functionality. Indeed, SPP elements as mirrors, splitters and interferometers have been recently demonstrated. However, for plasmonics to qualify at the information tec…
We present a comparative experimental study of three silicon photonic echelle grating demultiplexers that are integrated with a Mach-Zehnder interferometer (MZI) launch structure. By appropriate choice of the MZI configuration, the temperature induced shift of the demultiplexer channel wavelengths can be suppressed (athermal) or enhanced (super-thermal), or be controlled by an on-chip micro-heater. The latter two configurations allow the channel wavelengths to be actively tuned using lower power than possible by temperature tuning a conventional echelle demultiplexer. In the athermal configura…
Polarization-compatible receivers are indispensable in transceivers used for wavelength division multiplexing (WDM) optical communications, as light polarization is unpredictable after transmission through network fibers. However, the strong waveguide birefringence makes it difficult to realize a polarization-independent wavelength demultiplexer in a silicon photonic (SiPh) receiver. Here, we utilized the birefringence effect for simultaneously demultiplexing wavelengths and polarizations, and experimentally demonstrated a novel polarization-independent wavelength demultiplexer with a single d…
A major difficulty in applying computational design methods to nanophotonic devices is ensuring that the resulting designs are fabricable. Here, we describe a general inverse design algorithm for nanophotonic devices that directly incorporates fabrication constraints. To demonstrate the capabilities of our method, we designed a spatial-mode demultiplexer, wavelength demultiplexer, and directional coupler. We also designed and experimentally demonstrated a compact, broadband $1 \times 3$ power splitter on a silicon photonics platform. The splitter has a footprint of only $3.8 \times 2.5~\mathrm…
Previously proposed designs of integrated photonic devices have used the intuitive brute force approach or optimization methods that employ parameter search algorithms. However, a small parameter space and poor exploitation of the underlying physics have limited device performance, functionality, and footprint. In this paper, we propose efficient and compact 2D 1xN in-plane-incidence wavelength demultiplexers by using recently developed objective-first inverse design algorithm. Output ports in the presented 1xN photonic devices are located along the transverse to the input channel. Ultra-high …
Adiabatic waveguide taper and on-chip wavelength demultiplexer are the key components of photonic integrated circuits. However, these two kinds of devices which designed by traditional semi-analytic methods or brute-force search methods usually have large size. Here, based on regularized digital metamaterials, we have designed, fabricated and characterized a two-channel focused wavelength demultiplexer with a footprint of 2.4 x 10 um2. The designed demultiplexer can directly connect to a grating coupler under the absence of an adiabatic waveguide taper. The objective first method and modified …
The realization of ultra-compact passive silicon photonic devices is becoming more and more important for the future large-scale photonic integration as desired for many systems. Although some compact silicon photonic devices have been demonstrated by using inverse design, the device performance is still insufficient for real applications. Here, we propose and realize several representative ultra-compact advanced passive silicon photonic devices with decent performances by introducing subwavelength-grating (SWG) structures developed by our high-efficiency inverse design method. These devices a…
Transient fully reconfigurable photonic circuits can be introduced at the optical fiber surface with subangstrom precision. A building block of these circuits, a 0.7 angstrom-precise nano-bottle resonator, is experimentally created by local heating, translated, and annihilated.
In the paper, we propose the new technology for mass production of the photonic crystal devices and all-optical integrated circuits. We carry out the brief analysis of positive and negative sides paying attention to recent advances in silicon fibers fabrication which is crucial moment in the proposed technology.
We demonstrate a photonic circuit with integrated long-lived quantum memories. Pre-selected quantum nodes - diamond micro-waveguides containing single, stable, and negatively charged nitrogen vacancy centers - are deterministically integrated into low-loss silicon nitride waveguides. Each quantum memory node efficiently couples into the single-mode waveguide (> 1 Mcps collected into the waveguide) and exhibits long spin coherence times of up to 120 μs. Our system facilitates the assembly of multiple quantum memories into a photonic integrated circuit with near unity yield, paving the way towar…
We propose an equivalent circuit model for photonic spike processing laser neurons with an embedded saturable absorber---a simulation model for photonic excitable lasers (SIMPEL). We show that by mapping the laser neuron rate equations into a circuit model, SPICE analysis can be used as an efficient and accurate engine for numerical calculations, capable of generalization to a variety of different laser neuron types found in literature. The development of this model parallels the Hodgkin--Huxley model of neuron biophysics, a circuit framework which brought efficiency, modularity, and generaliz…
We present an accurate and fast 3D simulation scheme for out-of-plane grating couplers, based on two dimensional rigorous (finite difference time domain) grating simulations, the effective index method (EIM), and the Rayleigh-Sommerfeld diffraction formula. In comparison with full 3D FDTD simulations, the rms difference in electric field is below 5% and the difference in power flux is below 3%. A grating coupler for coupling from a silicon-on-insulator photonic integrated circuit to an optical fiber positioned 0.1 mm above the circuit is designed as example.
3D Photonic integration leveraging hybrid-confinement circuits
Université Marie et Louis Pasteur（玛丽和路易·巴斯德大学）；CNRS UMR 6174（法国国家科学研究中心联合研究单位6174）；Institut FEMTO-ST（FEMTO-ST研究所）；Heidelberg University（海德堡大学）；Kirchhoff Institute for Physics（基尔霍夫物理研究所）
There has been recent interest in the development of optical analogues of lumped element circuitry, where optical elements act as effective optical inductors, capacitors, and resistors. Such optical circuitry requires the photonic equivalent of electrical wires, structures able carry optical frequency signals to and from the lumped circuit elements while simultaneously maintaining signal carrier wavelengths much larger than the size of the lumped elements. Here we demonstrate the design, fabrication, and characterization of hybrid metal/doped-semiconductor 'photonic wires' operating at optical…
We propose a new method for mass production of the photonic crystal devices on the basis of widely-known and well-developed technology such as microstructured optical fibers. In this paper, we investigate the optical properties of side-excited microstructured optical fiber and discuss the conditions for utilization such a structure as a planar photonic crystal device, namely, the high-quality resonance filter.
A broadband opto-mechanical phase shifter for photonic integrated circuits is proposed and numerically investigated. The structure consists of a mode-carrying waveguide and a deformable non-mode-carrying nanostring, which are parallel with each other. Utilizing the optical gradient force between them, the nanostring can be deflected. Thus the effective refractive indices of the waveguide is changed with the deformation, and further causes a phase shift. The phase shift under different geometry sizes, launched powers and boundary conditions are calculated and the dynamical properties as well as…
Photonic integrated circuits (PICs) play a pivotal role in many applications. Particularly powerful are circuits based on meshes of reconfigurable Mach-Zehnder interferometers as they enable active processing of light. Various possibilities exist to get light into such circuits. Sampling an electromagnetic field distribution with a carefully designed free-space interface is one of them. Here, a reconfigurable PIC is used to optically sample and process free-space beams so as to implement a spatially resolving detector of amplitudes and phases. In order to perform measurements of this kind we d…
A general RF-photonic circuit design for implementing frequency multiplication is proposed. The circuit consists of N cascaded differentially-driven Mach-Zehnder modulators biased at the minimum transmission point with a progressive RF phase shift of 180/N applied to each stage. The frequency multiplication factor obtained is 2N. The novelty of the design is the reduced input RF energy required in comparison to the functionally equivalent parallel MZM configuration. Using transfer matrix method, a N=3 architecture is modeled to obtain frequency sextupling. An industry standard simulation tool …
The loss of surface plasmon polaritons has long been considered as a fatal shortcoming in information transport. Here we propose a plasmonic absorber utilizing this "shortcoming" to absorb the stray light in photonic integrated circuits (PICs). Based on adiabatic mode evolution, its performance is insensitive to incident wavelength with bandwidth larger than 300nm, and robust against surrounding environment and temperature. Besides, the use of metal enables it to be very compact and beneficial to thermal dissipation. With this 40um-long absorber, the absorption efficiency can be over 99.8% at …
In the recent article by Feng et al. [Science 333, 729-733 (2011)] a system is proposed with a periodic spatial modulation of refractive index and absorption. It is claimed that this system is nonreciprocal and can be used as an optical isolator. The authors use an unconventional definition of reciprocity and thus make wrong conclusions on the applicability of the described phenomena for optical isolators. (Submitted to Science on October 7, 2011)
The fruitful association of quantum and integrated photonics holds the promise to produce, manipulate, and detect quantum states of light using compact and scalable systems. Integrating all the building-blocks necessary to produce high-quality photonic entanglement in the telecom wavelength range out of a single chip remains a major challenge, mainly due to the limited performance of on-chip light rejection filters. We report a stand-alone, telecom-compliant, device that integrates, on a single substrate, a nonlinear photon-pair generator and a passive pump rejection filter. Using standard cha…
The interaction of optical and acoustic waves via stimulated Brillouin scattering (SBS) has recently reached on-chip platforms, which has opened new fields of applications ranging from integrated microwave photonics and on-chip narrow-linewidth lasers, to phonon-based optical delay and signal processing schemes. Since SBS is an effect that scales exponentially with interaction length, on-chip implementation on a short length scale is challenging, requiring carefully designed waveguides with optimized opto-acoustic overlap. In this work, we use the principle of Brillouin optical correlation dom…
We suggest a novel conceptual approach for describing the properties of waveguides and circuits in photonic crystals, based on the effective discrete equations that include the long-range interaction effects. We demonstrate, on the example of sharp waveguide bends, that our approach is very effective and accurate for the study of bound states and transmission spectra of the photonic-crystal circuits, and disclose the importance of evanescent modes in their properties.
Interpretable Geometry Sensitivity for Inverse Design of Integrated Photonics
Department of Electrical and Computer Engineering, University of Michigan, Ann Arbor（密歇根大学）；College of Computing, Data Science, and Society, University of California, Berkeley（加州大学伯克利分校计算、数据与社会学院）
This paper demonstrates the operation of a universal RF photonic circuit that consists of a generalized Mach Zehnder Interferometer architecture with its Nx1 combiner replaced by a NxN optical DFT network. The proposed circuit architecture can be used for SSB modulation, frequency up-conversion/down-conversion, frequency multiplication and phase correlated subcarrier generation based on the choice of output ports and dimension (N) of the circuit. An alternative representation of the circuit is also reported with the aim of a systematic demultiplexing. A transfer matrix approach is used to deve…
We demonstrate photonic quantum circuits that operate at the stringent levels that will be required for future quantum information science and technology. These circuits are fabricated from silica-on-silicon waveguides forming directional couplers and interferometers. While our focus is on the operation of quantum circuits, to test this operation required construction of a spectrally tuned photon source to produce near-identical pairs of photons. We show non-classical interference with two photons and a two-photon entangling logic gate that operate with near-unit fidelity. These results are a …
Photonic integrated circuits that are manufactured with mature semiconductor technology hold great promise for realizing scalable quantum technology. Efficient interfaces between quantum emitters and nanophotonic devices are crucial building blocks for such implementations on silicon chips. These interfaces can be realized as nanobeam optical cavities with high quality factors and wavelength-scale mode volumes, thus providing enhanced coupling between nanoscale quantum emitters and nanophotonic circuits. Realizing such resonant structures is particularly challenging for the visible wavelength …
A novel technique is presented for realising programmable silicon photonic circuits. Once the proposed photonic circuit is programmed, its routing is retained without the need for additional power consumption. This technology enables a uniform multi-purpose design of photonic chips for a range of different applications and performance requirements, as it can be programmed for each specific application after chip fabrication. Therefore the cost per chip can be dramatically reduced because of the increase in production volume, and rapid prototyping of new photonic circuits is enabled. Essential …
Erbium-doped fiber amplifiers have revolutionized long-haul optical communications and laser technology. Erbium ions could equally provide a basis for efficient optical amplification in photonic integrated circuits. However, this approach has thus far remained impractical due to insufficient output power. Here, we demonstrate a photonic integrated circuit based erbium amplifier reaching 145 mW output power and more than 30 dB small-signal gain -- on par with commercial fiber amplifiers and beyond state-of-the-art III-V heterogeneously integrated semiconductor amplifiers. We achieve this by app…
In the article "Nonreciprocal Light Propagation in a Silicon Photonic Circuit" (Science 333, 729-733 (2011) a nonreciprocal waveguide system based on a combination of silicon, dielectrics and metals is reported. In this Comment it is explained that the interpretation with respect to nonreciprocity in this paper is incorrect and conflicts with the fundamental Lorentz reciprocity theorem. It is further pointed out that a previous publication already introduced the device concept.
In this work, we demonstrate a compact toolkit of inverse-designed topologically optimized silicon-photonic devices that are arranged in a plug-and-play fashion to realize many different photonic integrated circuits, both passive and active, each with a small footprint. The silicon-on-insulator 1550-nm toolkit contains a 2x2 3dB splitter-combiner, a 2x2 waveguide crossover and a 2x2 all-forward add-drop resonator. The resonator can become a 2x2 electro-optical crossbar switch by means of the thermo-optical effect or phase-change cladding or free-carrier injection. For each of the ten circuits …
Following the simple observation that the interconnection of a set of quantum optical input-output devices can be specified using structural mode VHSIC Hardware Description Language (VHDL), we demonstrate a computer-aided schematic capture workflow for modeling and simulating multi-component photonic circuits. We describe an algorithm for parsing circuit descriptions to derive quantum equations of motion, illustrate our approach using simple examples based on linear and cavity-nonlinear optical components, and demonstrate a computational approach to hierarchical model reduction.
