A classic result by Gromov and Lawson states that a Riemannian metric of non--negative scalar curvature on the Torus must be flat. The analogous rigidity result for the standard sphere was shown by Llarull. Later Goette and Semmelmann generalized it to locally symmetric spaces of compact type and nontrivial Euler characteristic. In this paper we improve the results by Llarull and Goette, Semmelmann. In fact we show that if $(M,g_0)$ is a locally symmetric space of compact type with $χ(M)\neq 0$ and $g$ is a Riemannian metric on $M$ with $\mathrm{scal}_g\cdot g\geq \mathrm{scal}_0\cdot g_0$, then $g$ is a constant multiple of $g_0$. The previous results by Llarull and Goette, Semmelmann always needed the two inequalities $g\geq g_0$ and $\mathrm{scal}_g\geq \mathrm{scal}_0$ in order to conclude $g=g_0$. Moreover, if $(S^{2m},g_0)$ is the standard sphere, we improve this result further and show that any metric $g$ on $S^{2m}$ of scalar curvature $\mathrm{scal}_g\geq (2m-1)\mathrm{tr}_g(g_0)$ is a constant multiple of $g_0$.
We relate the (non)existence of lower scalar curvature bounds to the existence of certain distance-decreasing maps. We also give a sufficient condition for the existence of a limiting scalar curvature measure in the backward limit of a Ricci flow solution.
We show any Riemannian curvature model can be geometrically realized by a manifold with constant scalar curvature. We also show that any pseudo-Hermitian curvature model, para-Hermitian curvature model, hyper-pseudo-Hermitian curvature model, or hyper-para-Hermitian curvature model can be realized by a manifold with constant scalar and *-scalar curvature.
In this paper, we show that steady or shrinking complete gradient Yamabe solitons with finite total scalar curvature and non-positive Ricci curvature are Ricci flat. Moreover, under certain pinching condition for Ricci curvature, we show that steady or shrinking complete gradient Yamabe solitons with finite total scalar curvature and non-positive scalar curvature have zero scalar curvature.
In this short paper, we establish a closer relation between the Berwald scalar curvature and the $S$-curvature. In fact, we prove that a Finsler metric has isotropic Berwald scalar curvature if and only if it has weakly isotropic $S$-curvature. For Finsler metrics of scalar flag curvature and of weakly isotropic $S$-curvature, they have almost isotropic $S$-curvature if and only if the flag curvature is weakly isotropic.
We study the properties of the $n$-volumic scalar curvature in this note. Lott-Sturm-Villani's curvature-dimension condition ${\rm CD}(κ,n)$ was showed to imply Gromov's $n$-volumic scalar curvature $\geq nκ$ under an additional $n$-dimensional condition and we show the stability of $n$-volumic scalar curvature $\geq κ$ with respect to smGH-convergence. Then we propose a new weighted scalar curvature on the weighted Riemannian manifold and show its properties.
The aim of the present paper is to provide an \emph{intrinsic} investigation of special Finsler spaces of $H_{p}$-scalar curvature and of $H_{p}\,$-constant curvature. Characterizations of such spaces are shown. Sufficient condition for Finsler space of $H_{p}$-scalar curvature to be of perpendicular scalar curvature is investigated. Necessary and sufficient condition under which a Finsler space of scalar curvature turns into a Finsler space of $H_{p}$-scalar curvature is given. Further, certain conditions under which a Finsler manifolds of $H_{p}$-scalar curvature and of scalar curvature redu…
We formulate several conjectures on mean convex domains in the Euclidean spaces, as well as in more general spaces with lower bonds on their scalar curvatures, and prove a few theorems motivating these conjectures.
In this note, we prove that for a complete noncompact three dimensional Riemannian manifold with bounded sectional curvature, if it has uniformly positive scalar curvature, then there is a uniform lower bound on the injectivity radius.
In this paper, we study the Randers metrics of weakly isotropic scalar curvature. We prove that a Randers metric of weakly isotropic scalar curvature must be of isotropic $S$-curvature. Further, we prove that a conformally flat Randers metric of weakly isotropic scalar curvature is either Minkowskian or Riemannian.
We consider modified scalar curvature functions for Riemannian manifolds equipped with smooth measures. Given a Riemannian submersion whose fiber transport is measure-preserving up to constants, we show that the modified scalar curvature of the base is bounded below in terms of the scalar curvatures of the total space and fibers. We give an application concerning the scalar curvature of a smooth limit space arising in a bounded curvature collapse.
Extending Aubin's construction of metrics with constant negative scalar curvature, we prove that every $n$-dimensional closed manifold admits a Riemannian metric with constant negative scalar-Weyl curvature, that is $R+t|W|, t\in\mathbb{R}$. In particular, there are no topological obstructions for metrics with $\varepsilon$-pinched Weyl curvature and negative scalar curvature.
We approximate boundaries of convex polytopes by smooth hypersurfaces $Y=Y_\varepsilon$ with {\it positive mean curvatures} and, by using basic geometric relations between the scalar curvatures of Riemannin manifolds and the mean curvatures of their boundaries, establish {\it lower bound on the dihedral angles} of these polytopes.
The infimum of the Weyl functional is shown to be surprisingly small on many compact 4-manifolds that admit positive-scalar-curvature metrics. Results are also proved that systematically compare the scalar and self-dual Weyl curvatures of certain almost-Kaehler 4-manifolds.
In this short paper, we prove that a Finsler manifold with vanishing Berwald scalar curvature has zero $\mathbf{E}$-curvature. As a consequence, Landsberg manifolds with vanishing Berwald scalar curvature are Berwald manifolds. This improves a previous result in \cite{Li}. For $(α,β)$-metrics on manifold of dimension greater than 2, if the mean Landsberg curvature and the Berwald scalar curvature both vanish, the Berwald curvature also vanishes.
In this work, we study the Yamabe flow corresponding to the prescribed scalar curvature problem on compact Riemannian manifolds with negative scalar curvature. The long time existence and convergence of the flow are proved under appropriate conditions on the prescribed scalar curvature function.
We show that two smooth nearby Riemannian metrics can be glued interpolating their scalar curvature. The resulting smooth metric is the same as the starting ones outside the gluing region and has scalar curvature interpolating between the original ones. One can then glue metrics while maintaining inequalities satisfied by the scalar curvature. We also glue asymptotically Euclidean metrics to Schwarzschild ones and the same for asymptotically Delaunay metrics, keeping bounds on the scalar curvature, if any. This extend the Corvino gluing near infinity to non-constant scalar curvature metrics.
We use the theory of isoparametric functions to investigate gradient Ricci solitons with constant scalar curvature. We show rigidity of gradient Ricci solitons with constant scalar curvature under some conditions on the Ricci tensor, which are all satisfied if the manifold is curvature homogeneous. This leads to a complete description of four- and six-dimensional Kaehler gradient Ricci solitons with constant scalar curvature.
We overview main topics and ideas in spaces with their scalar curvatures bounded from below, and present a more detailed exposition of several known and some new geometric constraints on Riemannian spaces implied by the lower bounds on their scalar curvatures
Spherically symmetric metrics form a rich and important class of metrics. Many well-known Finsler metrics of constant flag curvature can be locally expressed as a spherically symmetric metric on R^n. In this paper, we study spherically symmetric metrics with constant Ricci curvature and constant flag curvature.
On a compact n-dimensional manifold, it has been conjectured that a critical point metric of the total scalar curvature, restricted to the space of metrics with constant scalar curvature of unit volume, will be Einstein. This conjecture was proposed in 1984 by Besse, but has yet to be proved. In this paper, we prove that if the manifold with the critical point metric has harmonic curvature, then it is isometric to a standard sphere.
On a compact manifold $M$ with boundary $\partial M$, we study the problem of prescribing the scalar curvature in $M$ and the mean curvature on the boundary $\partial M$ simultaneously. To do this, we introduce the notion of singular metric, which is inspired by the early work of Fischer-Marsden in [18] and Lin-Yuan in [23] for closed manifold. We show that we can prescribe the scalar curvature and the mean curvature simultaneously for generic scalar-flat manifolds with minimal boundary. We also prove some rigidity results for the flat manifolds with totally geodesic boundary.
We prove a formula involving the scalar curvature of a Riemannian manifold endowed with a distribution in terms of an adapted orthonormal frame for its tangent bundle. Using the formula, we then investigate the effect of collapsing the metric along the distribution on the scalar curvature. This result contributes to the question of finding a positive scalar curvature metric on a Riemannian manifold.
We classify the connected pseudo-Riemannian manifolds of signature $(p,q)$ with $q\ge5$ so that at each point of $M$ the skew-symmetric curvature operator has constant rank 2 and constant Jordan normal form on the set of spacelike 2 planes and so that the skew-symmetric curvature operator is not nilpotent for at least one point of $M$.
One of the most important problems in Finsler geometry is to classify Finsler metrics of scalar flag curvature. In this paper, we study the classification problem of Randers metrics of scalar flag curvature. Under the condition that $β$ is a Killing 1-form, we obtain some important necessary conditions for Randers metrics to be of scalar flag curvature.
In this paper we study invariant almost Hermitian geometry on generalized flag manifolds. We will focus on providing examples of Kähler like scalar curvature metric, that is, almost Hermitian structures $(g,J)$ satisfying $s=2s_{\rm C}$, where $s$ is Riemannian scalar curvature and $s_{\rm C}$ is the Chern scalar curvature.
We obtain some nonexistence results for complete noncompact stable hyppersurfaces with nonnegative constant scalar curvature in Euclidean spaces. As a special case we prove that there is no complete noncompact strongly stable hypersurface $M$ in $\mathbb{R}^{4}$ with zero scalar curvature $S_2$, nonzero Gauss-Kronecker curvature and finite total curvature (i.e. $\int_M|A|^3<+\infty$).
In this paper, we study the interplay of geometry and positive scalar curvature on a complete, non-compact manifold with non-negative Ricci curvature. In three-dimensional manifold, we prove a minimal volume growth, an estimate of integral of scalar curvature and width. In higher dimensional manifold, we obtain a volume growth with a stronger condition.
We explain how to derive largeness constraints in scalar curvature geometry using some basic splitting results and the potential theory on singular area minimizing hypersurfaces. This includes a variety of results like the non-existence of positive scalar curvature metrics on enlargeable manifolds or simplified proofs for positive mass theorems.
In this paper we extend the local scalar curvature rigidity result in [6] to a small domain on general vacuum static spaces, which confirms the interesting dichotomy of local surjectivity and local rigidity about the scalar curvature in general in the light of the paper [10]. We obtain the local scalar curvature rigidity of bounded domains in hyperbolic spaces. We also obtain the global scalar curvature rigidity for conformal deformations of metrics in the domains, where the lapse functions are positive, on vacuum static spaces with positive scalar curvature, and show such domains are maximal,…
We construct almost complex algebraic curvature tensors for pseudo Hermitian inner products whose skew-symmetric curvature operator has constant Jordan normal form on the set of non-degenerate complex lines.
Scalar curvature constraints can be studied by means of splitting procedures. The success of this strategy depends on the control we can get on its splitting factors. We introduce canonical so-called minimal splitting factors. They have positive scalar curvature while other properties strongly resemble those of area minimizing hypersurfaces. This includes the presence of Poincare, Sobolev and isoperimetric inequalities and the fact that singular points admit tangent cones but now with positive scalar curvature.
In this work we prove that the Whitehead manifold has no complete metric of positive scalar curvature. This result can be generalized to the genus one case. Precisely, we show that no contractible genus one $3$-manifold admits a complete metric of positive scalar curvature.
An Einstein manifold is called scalar curvature rigid if there are no compactly supported volume-preserving deformation of the metric which increase the scalar curvature. We give various characterizations of scalar curvature rigidity for open Einstein manifolds as well as for closed Einstein manifolds. As an application, we construct mass-decreasing perturbations of the Riemannian Schwarzschild metric and the Taub-Bolt metric.
In this paper, we investigate complete curvature-adapted submanifolds with maximal flat section and trivial normal holonomy group in symmetric spaces of compact type or non-compact type under certain condition, and derive the constancy of the principal curvatures of such submanifolds. As its result, we can derive that such submanifolds are isoparametric.
We prove a criterion of existence of solutions conjectured by C. C. Chen and C. S. Lin [20] for the prescribed scalar curvature problem on the standard n-dimensional sphere.
Motivated by the torus stability problem, in this work we study Kähler metrics with almost non-negative scalar curvature on complex torus. We prove that after passing to a subsequence, non-collapsing sequence of Kähler metrics with almost non-negative scalar curvature will converge to flat torus weakly.
The famous pinching problem says that on a compact simply connected $n$-manifold if its sectional curvature satisfies $K_{min} > (1/4)K_{max} > 0$, then the manifold is homeomorphic to the sphere. In [8, problem 12], S. T. Yau proposed the following problem: If we replace $K_{max}$ by the scalar curvature, can we deduce similar pinching theorems? In our present note we give an answer to this question in dimension $n = 4.$}
We show that a Riemannian $3$-manifold with non-negative scalar curvature is flat if it contains an area-minimizing cylinder. This scalar-curvature analogue of the classical splitting theorem of J.~Cheeger and D.~Gromollhas been conjectured by D.~Fischer-Colbrie and R.~Schoen and by M.~Cai and G.~Galloway.
Every Finsler metric naturally induces a spray but not so for the converse. The notion for sprays of scalar (resp. isotropic) curvature has been known as a generalization for Finsler metrics of scalar (resp. isotropic) flag curvature. In this paper, a new notion, sprays of constant curvature, is introduced and especially it shows that a spray of isotropic curvature is not necessarily of constant curvature even in dimension $n\ge3$. Further, complete conditions are given for sprays of isotropic (resp. constant) curvature to be Finsler-metrizabile. As applications of such a result, the local str…
Let $M^n(n\geq3)$ be an $n$-dimensional compact Riemannian manifold with harmonic curvature and positive scalar curvature. Assume that $M^n$ satisfies some integral pinching conditions. We give some rigidity theorems on compact manifolds with harmonic curvature and positive scalar curvature. In particular, Theorem 1.4, Corollary 1.6 and Theorem 1.9 are sharp for our conditions have the additional properties of being sharp. By this we mean that we can precisely characterize the case of equality.
This article is a survey of recent results about scalar curvature and contractible open $3$-manifolds. It is dedicated to the memory of Professor S. S. Chern.
